zeus/3d-configs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

new config for 0.5 nozzle and prusament petg black

Browse Source
This commit is contained in:
zeus 2023-07-15 17:44:08 +02:00
parent 0b7a406ca1
commit 59fd669a8a
5 changed files with 71 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
PrusaSlicer/PrusaSlicer.ini
View File

@ -1,6 +1,6 @@
# generated by PrusaSlicer 2.5.2 on 2023-06-19 at 18:14:34 UTC
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-07-15 at 15:41:15 UTC
allow_ip_resolve = 1
auto_toolbar_size = 100
auto_toolbar_size = 96
autocenter = 0
background_processing = 0
clear_undo_redo_stack_on_new_project = 1
@ -37,13 +37,13 @@ use_custom_toolbar_size = 0
use_free_camera = 0
use_inches = 0
use_perspective_camera = 0
version = 2.5.2
version = 2.5.0+linux-x64-GTK2
version_check = 1
version_online = 2.4.2
version_online_seen = 2.4.2
version_system_info_sent = 2.5.0+linux-x64-GTK2
view_mode = expert
window_mainframe = 0; 69; 5120; 1371; 1
window_mainframe = 36; 24; 1330; 744; 1
[filaments]
Generic ABS = 1

57
PrusaSlicer/filament/PETG-prusament-black-test.ini Normal file
View File

@ -0,0 +1,57 @@
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-06-20 at 20:59:06 UTC
bed_temperature = 70
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #000000
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 20
filament_density = 1.18
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 72
first_layer_temperature = 245
full_fan_speed_layer = 3
inherits =
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 8
start_filament_gcode = "; Filament gcode\n"
temperature = 245

4
PrusaSlicer/filament/PLA_Sunlu_Grasgruen.ini
View File

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2022-09-26 at 18:17:08 UTC
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-06-19 at 18:24:16 UTC
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
@ -6,7 +6,7 @@ compatible_printers_condition =
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 2
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.98
fan_always_on = 1

8
PrusaSlicer/print/delta.ini
View File

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-03-31 at 21:06:44 UTC
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-06-20 at 20:29:40 UTC
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
@ -33,7 +33,7 @@ fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.4
first_layer_height = 0.3
first_layer_speed = 35
first_layer_speed_over_raft = 30
fuzzy_skin = none
@ -62,7 +62,7 @@ ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 20
ironing_type = topmost
layer_height = 0.4
layer_height = 0.3
max_print_speed = 200
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
@ -92,7 +92,7 @@ raft_layers = 0
resolution = 0
seam_position = rear
single_extruder_multi_material_priming = 1
skirt_distance = 4
skirt_distance = 2
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049

8
PrusaSlicer/printer/delta.ini
View File

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2022-09-26 at 18:16:41 UTC
# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-06-20 at 20:29:30 UTC
bed_custom_model =
bed_custom_texture =
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
@ -10,7 +10,7 @@ cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile =
deretract_speed = 0
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
extra_loading_move = -2
extruder_colour = #019B9B
extruder_offset = 0x0
@ -37,10 +37,10 @@ machine_max_jerk_y = 9,9
machine_max_jerk_z = 9,9
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
max_layer_height = 0.35
max_print_height = 190
min_layer_height = 0.1
nozzle_diameter = 0.6
nozzle_diameter = 0.5
parking_pos_retraction = 92
pause_print_gcode = M601
print_host =