# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-07-16 at 18:30:13 UTC
bed_custom_model = 
bed_custom_texture = 
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile = 
deretract_speed = 0
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
extra_loading_move = -2
extruder_colour = #019B9B
extruder_offset = 0x0
gcode_flavor = marlin2
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = 
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 10000,5000
machine_max_acceleration_extruding = 1500,1250
machine_max_acceleration_retracting = 1500,1250
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 9000,9000
machine_max_acceleration_y = 9000,9000
machine_max_acceleration_z = 9000,9000
machine_max_feedrate_e = 250,250
machine_max_feedrate_x = 1500,1500
machine_max_feedrate_y = 1500,1500
machine_max_feedrate_z = 1500,1500
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 9,9
machine_max_jerk_y = 9,9
machine_max_jerk_z = 9,9
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.35
max_print_height = 190
min_layer_height = 0.1
nozzle_diameter = 0.5
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = 
printer_notes = 
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 10%
retract_layer_change = 0
retract_length = 2.5
retract_length_toolchange = 10
retract_lift = 0.15
retract_lift_above = 0
retract_lift_below = 150
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 37.5
silent_mode = 1
single_extruder_multi_material = 0
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z25 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n;{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 60}M900 K0.1; reduced LINEAR_ADVANCE because of medium speeds\n;{else}M900 K0.2; LINEAR_ADVANCE high quality preset\n; qualitywise ideal K would be somewhere around 0.38, but this slows the printer down at a unacceptable rate\nM900 K0  ;disabled linear advance alltogether, because it really hurts the printer and makes very screecy noises\n;{endif}
template_custom_gcode = 
thumbnails = 
thumbnails_format = PNG
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0