gitignore
zeus
commit
06dc1b6287
|
|
@ -1,2 +1,3 @@
|
||||||
snapshots/*
|
/snapshots/*
|
||||||
cache/*
|
/cache/*
|
||||||
|
/vendor/*
|
||||||
|
|
|
||||||
|
|
@ -1,90 +0,0 @@
|
||||||
# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-09-20 at 21:18:04 UTC
|
|
||||||
allow_ip_resolve = 1
|
|
||||||
auto_toolbar_size = 96
|
|
||||||
autocenter = 0
|
|
||||||
background_processing = 0
|
|
||||||
clear_undo_redo_stack_on_new_project = 1
|
|
||||||
collapsed_sidebar = 0
|
|
||||||
color_mapinulation_panel = 0
|
|
||||||
custom_toolbar_size = 100
|
|
||||||
default_action_on_close_application = none
|
|
||||||
default_action_on_new_project = none
|
|
||||||
default_action_on_select_preset = none
|
|
||||||
drop_project_action = 1
|
|
||||||
export_sources_full_pathnames = 0
|
|
||||||
last_output_path = /home/kostiank/Downloads/3d/g
|
|
||||||
last_output_path_removable = /run/media/zeus/A87B-A154/gcode
|
|
||||||
no_controller = 1
|
|
||||||
no_defaults = 1
|
|
||||||
notify_release = none
|
|
||||||
order_volumes = 1
|
|
||||||
preset_update = 1
|
|
||||||
remember_output_path = 1
|
|
||||||
remember_output_path_removable = 1
|
|
||||||
restore_win_position = 1
|
|
||||||
reverse_mouse_wheel_zoom = 0
|
|
||||||
seq_top_layer_only = 1
|
|
||||||
show_drop_project_dialog = 1
|
|
||||||
show_hints = 0
|
|
||||||
show_incompatible_presets = 0
|
|
||||||
show_splash_screen = 1
|
|
||||||
single_instance = 0
|
|
||||||
tls_accepted_cert_store_location = /etc/ssl/certs/ca-certificates.crt
|
|
||||||
tls_cert_store_accepted = yes
|
|
||||||
translation_language = en_GB
|
|
||||||
use_custom_toolbar_size = 0
|
|
||||||
use_free_camera = 0
|
|
||||||
use_inches = 0
|
|
||||||
use_perspective_camera = 0
|
|
||||||
version = 2.4.1+linux-x64-GTK2
|
|
||||||
version_check = 1
|
|
||||||
version_online = 2.4.2
|
|
||||||
version_online_seen = 2.4.2
|
|
||||||
version_system_info_sent = 2.4.1+linux-x64-GTK2
|
|
||||||
view_mode = expert
|
|
||||||
window_mainframe = 42; 24; 1324; 744; 1
|
|
||||||
|
|
||||||
[filaments]
|
|
||||||
Generic ABS = 1
|
|
||||||
Generic ABS @MINI = 1
|
|
||||||
Generic PETG = 1
|
|
||||||
Generic PETG @0.6 nozzle MINI = 1
|
|
||||||
Generic PETG @MINI = 1
|
|
||||||
Generic PLA = 1
|
|
||||||
Prusament ASA = 1
|
|
||||||
Prusament ASA @MINI = 1
|
|
||||||
Prusament PETG = 1
|
|
||||||
Prusament PETG @0.6 nozzle MINI = 1
|
|
||||||
Prusament PETG @MINI = 1
|
|
||||||
Prusament PLA = 1
|
|
||||||
|
|
||||||
[presets]
|
|
||||||
filament = PLA_Sunlu_Grasgruen
|
|
||||||
physical_printer =
|
|
||||||
print = delta
|
|
||||||
printer = delta
|
|
||||||
sla_material = Prusa Orange Tough @0.025
|
|
||||||
sla_print = 0.025 UltraDetail
|
|
||||||
|
|
||||||
[recent]
|
|
||||||
config_directory = /home/knki1108/Downloads/3d/calibration/models
|
|
||||||
skein_directory = /home/zeus/git/zeus/3d-stuff/openscad/foreign/sc808
|
|
||||||
|
|
||||||
[recent_projects]
|
|
||||||
1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf
|
|
||||||
2 = /home/knki1108/Downloads/3d/calibration/models/3DBenchy.3mf
|
|
||||||
3 = /home/kostiank/Bilder/anderes/print issues top surface/kossel_2020_shells_plain.3mf
|
|
||||||
|
|
||||||
[sla_materials]
|
|
||||||
Prusa Orange Tough @0.025 = 1
|
|
||||||
Prusa Orange Tough @0.035 = 1
|
|
||||||
Prusa Orange Tough @0.05 = 1
|
|
||||||
Prusa Orange Tough @0.1 = 1
|
|
||||||
Prusament Resin Tough Prusa Orange @0.025 = 1
|
|
||||||
Prusament Resin Tough Prusa Orange @0.05 = 1
|
|
||||||
Prusament Resin Tough Prusa Orange @0.1 = 1
|
|
||||||
|
|
||||||
[vendor:PrusaResearch]
|
|
||||||
model:MINI = 0.25;0.4;0.6
|
|
||||||
model:MK3S = 0.4
|
|
||||||
|
|
||||||
|
|
@ -1,19 +0,0 @@
|
||||||
min_slic3r_version = 2.4.1-rc1
|
|
||||||
0.1.0 Added Anycubic 4Max Pro 2.0
|
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
|
||||||
0.0.12 Updated Anycubic i3 MEGA(S) profiles.
|
|
||||||
0.0.11 Added bed model and texture for i3 Mega, i3 Mega S.
|
|
||||||
min_slic3r_version = 2.3.1-beta
|
|
||||||
0.0.10 Various updates for Anycubic Mega. Added filament profiles.
|
|
||||||
0.0.9 Updated bed textures
|
|
||||||
min_slic3r_version = 2.3.0-beta2
|
|
||||||
0.0.8 Updated start and end g-code for Anycubic Mega.
|
|
||||||
0.0.7 Updated start g-code for Anycubic Mega.
|
|
||||||
0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel.
|
|
||||||
0.0.5 Updated end g-code.
|
|
||||||
min_slic3r_version = 2.3.0-alpha2
|
|
||||||
0.0.4 Fixed predator output filename format, infill overlap, start gcode adjustments.
|
|
||||||
0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator
|
|
||||||
0.0.2 Added Anycubic Predator
|
|
||||||
min_slic3r_version = 2.3.0-alpha0
|
|
||||||
0.0.1 Initial Version
|
|
||||||
|
|
@ -1,19 +0,0 @@
|
||||||
min_slic3r_version = 2.4.1-beta3
|
|
||||||
0.0.5 Correct Marlin Error accumulation for Ditto printer profiles.
|
|
||||||
0.0.4 Correct Marlin Error accumulation
|
|
||||||
min_slic3r_version = 2.3.0-beta2
|
|
||||||
0.0.3 Removed obsolete host keys.
|
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
|
||||||
0.0.2 General print quality improvements
|
|
||||||
0.0.1 Multiple Print models were unified into a single one.
|
|
||||||
0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
|
|
||||||
0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
|
|
||||||
0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
|
|
||||||
0.0.1-alpha12 github repo created for version history
|
|
||||||
0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
|
|
||||||
0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
|
|
||||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
|
|
||||||
# so they will see the print bed.
|
|
||||||
max_slic3r_version = 2.2.0-alpha2
|
|
||||||
min_slic3r_version = 2.2.0-alpha0
|
|
||||||
0.0.1-alpha Initial version
|
|
||||||
|
|
@ -1,43 +0,0 @@
|
||||||
min_slic3r_version = 2.5.0-alpha0
|
|
||||||
0.2.1 Added Ender 3 Neo and Ender 3 S1 Plus. Various updates.
|
|
||||||
0.2.0 Added alternative nozzle support
|
|
||||||
0.1.5 Added Ender-3 S1 Pro
|
|
||||||
min_slic3r_version = 2.4.1
|
|
||||||
0.1.4 Added Ender-3 Pro. Added M25 support for some printers.
|
|
||||||
min_slic3r_version = 2.4.0-rc
|
|
||||||
0.1.3 Ender-3 S1 improvements.
|
|
||||||
0.1.2 Added alpha Ender 3 S1 profiles.
|
|
||||||
min_slic3r_version = 2.4.0-beta4
|
|
||||||
0.1.1 Added Ender 2 Pro
|
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
|
||||||
0.1.0 Added Ender-7, Sermoon D1, CR-10 SMART
|
|
||||||
min_slic3r_version = 2.3.1-beta
|
|
||||||
0.0.17 Updated start g-code. Added specific start g-code for straingauge printers. Improved output filename format. Added filament profile.
|
|
||||||
0.0.16 Updated CR6-SE start g-code. Added and updated filament profiles.
|
|
||||||
0.0.15 Added new printer models, filament profiles. Various improvements.
|
|
||||||
min_slic3r_version = 2.3.0-rc2
|
|
||||||
0.0.14 Optimized start g-code. Added filament profile. Various improvements.
|
|
||||||
0.0.13 Optimized start and end g-code. General improvements.
|
|
||||||
0.0.12 Added Ender-3V2 and filament profiles.
|
|
||||||
min_slic3r_version = 2.3.0-beta2
|
|
||||||
0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.
|
|
||||||
0.0.10 Parameter consistency improvements. Enabled conservative elephant foot compensation.
|
|
||||||
0.0.9 Fixed end g-code for Ender 5.
|
|
||||||
0.0.8 Slight end g-code improvements and spool weights.
|
|
||||||
min_slic3r_version = 2.3.0-alpha2
|
|
||||||
0.0.7 Updated start g-code for Creality printers.
|
|
||||||
0.0.6 Added filament profiles, adjusted temperatures, updated start g-code for some models.
|
|
||||||
0.0.5 Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. Updated OPTIMAL print profile.
|
|
||||||
0.0.4 Added initial CR-10 profile, end g-code improvements.
|
|
||||||
min_slic3r_version = 2.3.0-alpha0
|
|
||||||
0.0.3 Added Ender-2, Ender-3 BLTouch, updated Ender-3 bed texture.
|
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
|
||||||
0.0.2 Updated for PrusaSlicer 2.2.0-rc
|
|
||||||
0.0.2-beta Update for PrusaSlicer 2.2.0-beta
|
|
||||||
0.0.2-alpha1 Extended list of default filaments to be installed
|
|
||||||
0.0.2-alpha0 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
|
||||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
|
||||||
# so they will see the print bed.
|
|
||||||
max_slic3r_version = 2.2.0-alpha2
|
|
||||||
min_slic3r_version = 2.2.0-alpha0
|
|
||||||
0.0.1 Initial version
|
|
||||||
|
|
@ -1,2 +0,0 @@
|
||||||
min_slic3r_version = 2.3.0-rc2
|
|
||||||
0.0.1 Initial Version
|
|
||||||
|
|
@ -1,4 +0,0 @@
|
||||||
min_slic3r_version = 2.3.0-beta2
|
|
||||||
0.0.2 Removed obsolete host keys
|
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
|
||||||
0.0.1 Initial version
|
|
||||||
|
|
@ -1,216 +0,0 @@
|
||||||
min_slic3r_version = 2.5.0-alpha0
|
|
||||||
1.5.2 Added SLA material profiles.
|
|
||||||
1.5.1 Renamed filament type "NYLON" to "PA". Updated Adura X profile. Updated PETG fan settings for Prusa MINI (removed fan ramp up).
|
|
||||||
1.5.0 Updated arachne parameters. Added profiles for Jessie filaments.
|
|
||||||
1.5.0-alpha1 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
|
|
||||||
1.5.0-alpha0 Added parameters for Arachne perimeter generator. Changed default seam position. Updated output filename format.
|
|
||||||
min_slic3r_version = 2.4.0-rc
|
|
||||||
1.4.8 Added filament and SLA material profiles. Updated settings.
|
|
||||||
1.4.7 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
|
|
||||||
1.4.6 Added SLA materials. Updated filament profiles.
|
|
||||||
1.4.5 Added MMU2/S profiles for 0.25mm nozzle. Updated FW version. Enabled g-code thumbnails for MK3 family printers. Updated end g-code.
|
|
||||||
1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles.
|
|
||||||
1.4.3 Added new filament profiles and SLA materials.
|
|
||||||
1.4.2 Added SLA material profiles.
|
|
||||||
1.4.1 Updated firmware version.
|
|
||||||
1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
|
|
||||||
min_slic3r_version = 2.4.0-beta2
|
|
||||||
1.4.0-beta3 Added material profiles for Prusament Resins.
|
|
||||||
1.4.0-beta2 Added SLA material colors. Updated BASF filament profiles.
|
|
||||||
min_slic3r_version = 2.4.0-beta0
|
|
||||||
1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI.
|
|
||||||
1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
|
|
||||||
min_slic3r_version = 2.4.0-alpha0
|
|
||||||
1.4.0-alpha8 Added material profiles for Prusament Resin. Detect bridging perimeters enabled by default.
|
|
||||||
1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles.
|
|
||||||
1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
|
|
||||||
1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
|
||||||
1.4.0-alpha4 Decreased Area Fill (SL1S).
|
|
||||||
1.4.0-alpha3 Updated SL1S tilt times.
|
|
||||||
1.4.0-alpha2 Updated Prusa MINI machine limits.
|
|
||||||
1.4.0-alpha1 Added new SL1S resin profiles.
|
|
||||||
1.4.0-alpha0 Bumped up config version.
|
|
||||||
1.3.0-alpha2 Added SL1S SPEED profiles.
|
|
||||||
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
|
||||||
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
|
||||||
1.3.7 Updated firmware version.
|
|
||||||
1.3.6 Updated firmware version.
|
|
||||||
1.3.5 Added material profiles for Prusament Resins.
|
|
||||||
1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
|
|
||||||
1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
|
|
||||||
1.3.2 Added material profiles for Prusament Resin.
|
|
||||||
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
|
||||||
1.3.0 Added SL1S SPEED profiles.
|
|
||||||
min_slic3r_version = 2.3.0-rc1
|
|
||||||
1.2.12 Updated firmware version.
|
|
||||||
1.2.11 Updated firmware version.
|
|
||||||
1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
|
|
||||||
1.2.9 Added material profiles for Prusament Resin.
|
|
||||||
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
|
||||||
1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
|
|
||||||
1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
|
|
||||||
1.2.5 Updated firmware version. Added filament profiles. Various improvements.
|
|
||||||
1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
|
|
||||||
1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
|
||||||
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
|
||||||
1.2.1 Updated FW version for MK2.5 family printers.
|
|
||||||
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
|
||||||
min_slic3r_version = 2.3.0-beta2
|
|
||||||
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
|
||||||
min_slic3r_version = 2.3.0-beta0
|
|
||||||
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
|
||||||
min_slic3r_version = 2.3.0-alpha4
|
|
||||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
|
||||||
1.2.0-alpha0 Added filament spool weights
|
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
|
||||||
1.1.16 Updated firmware version.
|
|
||||||
1.1.15 Updated firmware version.
|
|
||||||
1.1.14 Updated firmware version.
|
|
||||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
|
||||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
|
||||||
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
|
||||||
1.1.10 Updated firmware version.
|
|
||||||
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
|
||||||
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
|
||||||
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
|
||||||
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
|
||||||
1.1.4 Added Prusament PC Blend filament profile.
|
|
||||||
1.1.3 Added SLA material and filament profile
|
|
||||||
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
|
||||||
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
|
||||||
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
|
||||||
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
|
||||||
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
|
||||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
|
||||||
# so they will see the print bed.
|
|
||||||
max_slic3r_version = 2.2.0-alpha2
|
|
||||||
min_slic3r_version = 2.2.0-alpha0
|
|
||||||
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
|
||||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
|
||||||
min_slic3r_version = 2.1.1-beta0
|
|
||||||
1.0.12 Updated firmware version.
|
|
||||||
1.0.11 Updated firmware version.
|
|
||||||
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
|
||||||
1.0.7 Updated layer height limits for MINI
|
|
||||||
1.0.6 Added Prusa MINI profiles
|
|
||||||
min_slic3r_version = 2.1.0-alpha0
|
|
||||||
1.0.5 Added SLA materials
|
|
||||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
|
||||||
1.0.3 Added filament profiles
|
|
||||||
1.0.2 Added SLA materials
|
|
||||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
|
||||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
|
||||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
|
||||||
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
|
||||||
1.0.0-alpha2 Printer model and nozzle diameter check
|
|
||||||
1.0.0-alpha1 Added Prusament ASA profile
|
|
||||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
|
||||||
min_slic3r_version = 1.42.0-alpha6
|
|
||||||
0.8.11 Updated firmware version.
|
|
||||||
0.8.10 Updated firmware version.
|
|
||||||
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.8.7 Updated firmware version
|
|
||||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.8.5 Updated SL1 printer and material settings
|
|
||||||
0.8.4 Added Prusament ASA profile
|
|
||||||
0.8.3 FW version and SL1 materials update
|
|
||||||
0.8.2 FFF and SL1 settings update
|
|
||||||
0.8.1 Output settings and SLA materials update
|
|
||||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
|
||||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
|
||||||
0.8.0-rc1 Updated SLA profiles
|
|
||||||
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
|
||||||
0.8.0-beta4 Updated SLA profiles
|
|
||||||
0.8.0-beta3 Updated SLA profiles
|
|
||||||
0.8.0-beta2 Updated SLA profiles
|
|
||||||
0.8.0-beta1 Updated SLA profiles
|
|
||||||
0.8.0-beta Updated SLA profiles
|
|
||||||
0.8.0-alpha9 Updated SLA and FFF profiles
|
|
||||||
0.8.0-alpha8 Updated SLA profiles
|
|
||||||
0.8.0-alpha7 Updated SLA profiles
|
|
||||||
0.8.0-alpha6 Updated SLA profiles
|
|
||||||
min_slic3r_version = 1.42.0-alpha
|
|
||||||
0.8.0-alpha Updated SLA profiles
|
|
||||||
0.4.0-alpha4 Updated SLA profiles
|
|
||||||
0.4.0-alpha3 Update of SLA profiles
|
|
||||||
0.4.0-alpha2 First SLA profiles
|
|
||||||
min_slic3r_version = 1.41.3-alpha
|
|
||||||
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.4.10 Updated firmware version
|
|
||||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.4.8 MK2.5/3/S FW update
|
|
||||||
0.4.7 MK2/S/MMU FW update
|
|
||||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
|
||||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
|
||||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.4.1 New MK2.5S and MK3S FW versions
|
|
||||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
min_slic3r_version = 1.41.1
|
|
||||||
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.3.10 Updated firmware version
|
|
||||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.3.8 MK2.5/3/S FW update
|
|
||||||
0.3.7 MK2/S/MMU FW update
|
|
||||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
|
||||||
0.3.5 New MK2.5 and MK3 FW versions
|
|
||||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.3.3 Prusament PETG released
|
|
||||||
0.3.2 New MK2.5 and MK3 FW versions
|
|
||||||
0.3.1 New MK2.5 and MK3 FW versions
|
|
||||||
0.3.0 New MK2.5 and MK3 FW version
|
|
||||||
min_slic3r_version = 1.41.0-alpha
|
|
||||||
0.2.9 New MK2.5 and MK3 FW versions
|
|
||||||
0.2.8 New MK2.5 and MK3 FW version
|
|
||||||
min_slic3r_version = 1.41.1
|
|
||||||
0.2.7 New MK2.5 and MK3 FW version
|
|
||||||
0.2.6 Added MMU2 MK2.5 settings
|
|
||||||
min_slic3r_version = 1.41.0-alpha
|
|
||||||
0.2.5 Prusament is out - added prusament settings
|
|
||||||
0.2.4 Added soluble support profiles for MMU2
|
|
||||||
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
|
||||||
0.2.2 Edited MMU2 Single mode purge line
|
|
||||||
0.2.1 Added PET and BVOH settings for MMU2
|
|
||||||
0.2.0-beta5 Fixed MMU1 ramming parameters
|
|
||||||
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
|
||||||
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
|
||||||
0.2.0-beta2 Edited first layer speed and wipe tower position
|
|
||||||
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
|
||||||
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
|
||||||
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
|
||||||
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
|
||||||
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
|
||||||
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
|
||||||
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
|
||||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
|
||||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
|
||||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
|
||||||
min_slic3r_version = 1.40.0
|
|
||||||
0.1.18 Updated firmware version
|
|
||||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.1.16 MK2.5/3/S FW update
|
|
||||||
0.1.15 MK2/S/MMU FW update
|
|
||||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
|
||||||
0.1.13 New MK2.5 and MK3 FW versions
|
|
||||||
0.1.12 New MK2.5 and MK3 FW versions
|
|
||||||
0.1.11 fw version changed to 3.3.1
|
|
||||||
0.1.10 MK3 jerk and acceleration update
|
|
||||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
|
||||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
|
||||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
|
||||||
0.1.6 Split the MK2.5 profile from the MK2S
|
|
||||||
min_slic3r_version = 1.40.0-beta
|
|
||||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
|
||||||
0.1.4 edited fw version, added z-raise after print
|
|
||||||
min_slic3r_version = 1.40.0-alpha
|
|
||||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
|
||||||
0.1.2 Wipe tower changes
|
|
||||||
0.1.1 Minor print speed adjustments
|
|
||||||
0.1.0 Initial
|
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,12 +0,0 @@
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
|
||||||
0.0.9 Added AzteQ Industrial materials PC/ABS (Fillamentum), PC-Max (Polymaker), Nylon FX256 (Fillamentum), Added DeltiQ 2 materials Nylon PA12 (Fiberlogy), Nylon CF15 Carbon (Fillamentum), PEBA 90A - FlexFill (Fillamentum), MoldLay (Wax-Alike), disabled retract only when crossing perimeters, some minor setting improvements
|
|
||||||
0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements
|
|
||||||
min_slic3r_version = 2.3.0-alpha3
|
|
||||||
0.0.7 Added PLA, PETG profiles for 0.25 nozzle, fixed supports on 0.8 nozzle profile, fixed max volumetric speed, disabled elefant foot compensation
|
|
||||||
0.0.6 Added material TPU 93A (SMARTFIL)
|
|
||||||
0.0.5 Removed obsolete host keys.
|
|
||||||
0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials
|
|
||||||
0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
|
|
||||||
min_slic3r_version = 2.3.0-alpha0
|
|
||||||
0.0.2 Added 0.15mm print profile
|
|
||||||
0.0.1 Initial TriLAB bundle
|
|
||||||
|
|
@ -1,214 +0,0 @@
|
||||||
min_slic3r_version = 2.5.0-alpha0
|
|
||||||
1.5.1 Renamed filament type "NYLON" to "PA". Updated Adura X profile. Updated PETG fan settings for Prusa MINI (removed fan ramp up).
|
|
||||||
1.5.0 Updated arachne parameters. Added profiles for Jessie filaments.
|
|
||||||
1.5.0-alpha1 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
|
|
||||||
1.5.0-alpha0 Added parameters for Arachne perimeter generator. Changed default seam position. Updated output filename format.
|
|
||||||
min_slic3r_version = 2.4.0-rc
|
|
||||||
1.4.7 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
|
|
||||||
1.4.6 Added SLA materials. Updated filament profiles.
|
|
||||||
1.4.5 Added MMU2/S profiles for 0.25mm nozzle. Updated FW version. Enabled g-code thumbnails for MK3 family printers. Updated end g-code.
|
|
||||||
1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles.
|
|
||||||
1.4.3 Added new filament profiles and SLA materials.
|
|
||||||
1.4.2 Added SLA material profiles.
|
|
||||||
1.4.1 Updated firmware version.
|
|
||||||
1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
|
|
||||||
min_slic3r_version = 2.4.0-beta2
|
|
||||||
1.4.0-beta3 Added material profiles for Prusament Resins.
|
|
||||||
1.4.0-beta2 Added SLA material colors. Updated BASF filament profiles.
|
|
||||||
min_slic3r_version = 2.4.0-beta0
|
|
||||||
1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI.
|
|
||||||
1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
|
|
||||||
min_slic3r_version = 2.4.0-alpha0
|
|
||||||
1.4.0-alpha8 Added material profiles for Prusament Resin. Detect bridging perimeters enabled by default.
|
|
||||||
1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles.
|
|
||||||
1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
|
|
||||||
1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
|
||||||
1.4.0-alpha4 Decreased Area Fill (SL1S).
|
|
||||||
1.4.0-alpha3 Updated SL1S tilt times.
|
|
||||||
1.4.0-alpha2 Updated Prusa MINI machine limits.
|
|
||||||
1.4.0-alpha1 Added new SL1S resin profiles.
|
|
||||||
1.4.0-alpha0 Bumped up config version.
|
|
||||||
1.3.0-alpha2 Added SL1S SPEED profiles.
|
|
||||||
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
|
||||||
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
|
||||||
1.3.7 Updated firmware version.
|
|
||||||
1.3.6 Updated firmware version.
|
|
||||||
1.3.5 Added material profiles for Prusament Resins.
|
|
||||||
1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
|
|
||||||
1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
|
|
||||||
1.3.2 Added material profiles for Prusament Resin.
|
|
||||||
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
|
||||||
1.3.0 Added SL1S SPEED profiles.
|
|
||||||
min_slic3r_version = 2.3.0-rc1
|
|
||||||
1.2.12 Updated firmware version.
|
|
||||||
1.2.11 Updated firmware version.
|
|
||||||
1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
|
|
||||||
1.2.9 Added material profiles for Prusament Resin.
|
|
||||||
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
|
||||||
1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
|
|
||||||
1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
|
|
||||||
1.2.5 Updated firmware version. Added filament profiles. Various improvements.
|
|
||||||
1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
|
|
||||||
1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
|
||||||
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
|
||||||
1.2.1 Updated FW version for MK2.5 family printers.
|
|
||||||
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
|
||||||
min_slic3r_version = 2.3.0-beta2
|
|
||||||
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
|
||||||
min_slic3r_version = 2.3.0-beta0
|
|
||||||
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
|
||||||
min_slic3r_version = 2.3.0-alpha4
|
|
||||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
|
||||||
1.2.0-alpha0 Added filament spool weights
|
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
|
||||||
1.1.16 Updated firmware version.
|
|
||||||
1.1.15 Updated firmware version.
|
|
||||||
1.1.14 Updated firmware version.
|
|
||||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
|
||||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
|
||||||
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
|
||||||
1.1.10 Updated firmware version.
|
|
||||||
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
|
||||||
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
|
||||||
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
|
||||||
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
|
||||||
1.1.4 Added Prusament PC Blend filament profile.
|
|
||||||
1.1.3 Added SLA material and filament profile
|
|
||||||
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
|
||||||
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
|
||||||
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
|
||||||
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
|
||||||
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
|
||||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
|
||||||
# so they will see the print bed.
|
|
||||||
max_slic3r_version = 2.2.0-alpha2
|
|
||||||
min_slic3r_version = 2.2.0-alpha0
|
|
||||||
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
|
||||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
|
||||||
min_slic3r_version = 2.1.1-beta0
|
|
||||||
1.0.12 Updated firmware version.
|
|
||||||
1.0.11 Updated firmware version.
|
|
||||||
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
|
||||||
1.0.7 Updated layer height limits for MINI
|
|
||||||
1.0.6 Added Prusa MINI profiles
|
|
||||||
min_slic3r_version = 2.1.0-alpha0
|
|
||||||
1.0.5 Added SLA materials
|
|
||||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
|
||||||
1.0.3 Added filament profiles
|
|
||||||
1.0.2 Added SLA materials
|
|
||||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
|
||||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
|
||||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
|
||||||
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
|
||||||
1.0.0-alpha2 Printer model and nozzle diameter check
|
|
||||||
1.0.0-alpha1 Added Prusament ASA profile
|
|
||||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
|
||||||
min_slic3r_version = 1.42.0-alpha6
|
|
||||||
0.8.11 Updated firmware version.
|
|
||||||
0.8.10 Updated firmware version.
|
|
||||||
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.8.7 Updated firmware version
|
|
||||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.8.5 Updated SL1 printer and material settings
|
|
||||||
0.8.4 Added Prusament ASA profile
|
|
||||||
0.8.3 FW version and SL1 materials update
|
|
||||||
0.8.2 FFF and SL1 settings update
|
|
||||||
0.8.1 Output settings and SLA materials update
|
|
||||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
|
||||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
|
||||||
0.8.0-rc1 Updated SLA profiles
|
|
||||||
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
|
||||||
0.8.0-beta4 Updated SLA profiles
|
|
||||||
0.8.0-beta3 Updated SLA profiles
|
|
||||||
0.8.0-beta2 Updated SLA profiles
|
|
||||||
0.8.0-beta1 Updated SLA profiles
|
|
||||||
0.8.0-beta Updated SLA profiles
|
|
||||||
0.8.0-alpha9 Updated SLA and FFF profiles
|
|
||||||
0.8.0-alpha8 Updated SLA profiles
|
|
||||||
0.8.0-alpha7 Updated SLA profiles
|
|
||||||
0.8.0-alpha6 Updated SLA profiles
|
|
||||||
min_slic3r_version = 1.42.0-alpha
|
|
||||||
0.8.0-alpha Updated SLA profiles
|
|
||||||
0.4.0-alpha4 Updated SLA profiles
|
|
||||||
0.4.0-alpha3 Update of SLA profiles
|
|
||||||
0.4.0-alpha2 First SLA profiles
|
|
||||||
min_slic3r_version = 1.41.3-alpha
|
|
||||||
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.4.10 Updated firmware version
|
|
||||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.4.8 MK2.5/3/S FW update
|
|
||||||
0.4.7 MK2/S/MMU FW update
|
|
||||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
|
||||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
|
||||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.4.1 New MK2.5S and MK3S FW versions
|
|
||||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
min_slic3r_version = 1.41.1
|
|
||||||
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
|
||||||
0.3.10 Updated firmware version
|
|
||||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.3.8 MK2.5/3/S FW update
|
|
||||||
0.3.7 MK2/S/MMU FW update
|
|
||||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
|
||||||
0.3.5 New MK2.5 and MK3 FW versions
|
|
||||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
|
||||||
0.3.3 Prusament PETG released
|
|
||||||
0.3.2 New MK2.5 and MK3 FW versions
|
|
||||||
0.3.1 New MK2.5 and MK3 FW versions
|
|
||||||
0.3.0 New MK2.5 and MK3 FW version
|
|
||||||
min_slic3r_version = 1.41.0-alpha
|
|
||||||
0.2.9 New MK2.5 and MK3 FW versions
|
|
||||||
0.2.8 New MK2.5 and MK3 FW version
|
|
||||||
min_slic3r_version = 1.41.1
|
|
||||||
0.2.7 New MK2.5 and MK3 FW version
|
|
||||||
0.2.6 Added MMU2 MK2.5 settings
|
|
||||||
min_slic3r_version = 1.41.0-alpha
|
|
||||||
0.2.5 Prusament is out - added prusament settings
|
|
||||||
0.2.4 Added soluble support profiles for MMU2
|
|
||||||
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
|
||||||
0.2.2 Edited MMU2 Single mode purge line
|
|
||||||
0.2.1 Added PET and BVOH settings for MMU2
|
|
||||||
0.2.0-beta5 Fixed MMU1 ramming parameters
|
|
||||||
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
|
||||||
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
|
||||||
0.2.0-beta2 Edited first layer speed and wipe tower position
|
|
||||||
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
|
||||||
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
|
||||||
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
|
||||||
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
|
||||||
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
|
||||||
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
|
||||||
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
|
||||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
|
||||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
|
||||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
|
||||||
min_slic3r_version = 1.40.0
|
|
||||||
0.1.18 Updated firmware version
|
|
||||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
|
||||||
0.1.16 MK2.5/3/S FW update
|
|
||||||
0.1.15 MK2/S/MMU FW update
|
|
||||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
|
||||||
0.1.13 New MK2.5 and MK3 FW versions
|
|
||||||
0.1.12 New MK2.5 and MK3 FW versions
|
|
||||||
0.1.11 fw version changed to 3.3.1
|
|
||||||
0.1.10 MK3 jerk and acceleration update
|
|
||||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
|
||||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
|
||||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
|
||||||
0.1.6 Split the MK2.5 profile from the MK2S
|
|
||||||
min_slic3r_version = 1.40.0-beta
|
|
||||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
|
||||||
0.1.4 edited fw version, added z-raise after print
|
|
||||||
min_slic3r_version = 1.40.0-alpha
|
|
||||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
|
||||||
0.1.2 Wipe tower changes
|
|
||||||
0.1.1 Minor print speed adjustments
|
|
||||||
0.1.0 Initial
|
|
||||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 52 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 2.7 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 2.4 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 2.2 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 37 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 33 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 42 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 34 KiB |
|
|
@ -0,0 +1 @@
|
||||||
|
<svg id="Layer_1" data-name="Layer 1" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 135.97944 172.22888"><title>sub-project-brand-logo-variants</title><path d="M20.76052,132.92371H30.3149V143.7371c0,1.20128-.17135,2.97433-.28589,4.29109h.22908a32.85124,32.85124,0,0,1,2.40257-3.60478l9.44029-11.4997h10.298L39.81247,148.085l13.27322,23.45664H42.101l-8.92533-16.19028-2.86072,3.49023v12.70005H20.76052Z"/><path d="M62.41238,159.41335c-1.02994,3.71838,1.08674,6.06414,4.29062,6.06414,3.60431,0,5.4351-2.86072,5.4351-6.92273,0-4.34789-2.17395-6.0064-5.09194-6.0064a6.93936,6.93936,0,0,0-4.74832,1.83079l-4.11928-4.46337,11.9574-9.898H55.94735v-7.09408h23.743v7.4945l-9.154,7.55224c5.83553-.57177,11.38516,3.26115,11.38516,10.69885,0,8.06721-6.57957,13.55958-14.87539,13.55958-7.83766,0-14.41724-4.86286-12.701-11.672Z"/><path d="M93.76488,158.84158c-.68631,3.08887.515,6.63591,6.57957,6.63591,4.00427,0,5.37783-1.60171,5.37783-3.71931,0-3.20342-3.20435-4.00427-6.98047-5.3769-5.66324-1.94626-12.64324-4.69151-12.64324-12.75872,0-7.20862,5.54963-11.61424,14.989-11.38516,11.55744.22815,14.81859,7.03727,13.55958,12.93006l-8.75352.80086c.5727-4.46244-1.02994-6.98047-5.54918-6.98047-3.03207,0-4.74878,1.14541-4.74878,3.548,0,3.20342,3.08934,4.17561,6.86546,5.49237,5.836,1.9444,12.75779,4.29108,12.75779,12.29962,0,6.92273-5.14875,11.90107-15.21809,11.90107-9.43983,0-15.90486-4.34883-14.58858-12.58645Z"/><path d="M121.58689,0H14.39255A14.43487,14.43487,0,0,0,0,14.39247V96.96991a14.43487,14.43487,0,0,0,14.39255,14.39247H121.58689a14.43487,14.43487,0,0,0,14.39255-14.39247V14.39247A14.43487,14.43487,0,0,0,121.58689,0ZM57.45811,80.98065,31.29766,96.18344A6.99993,6.99993,0,1,1,24.26348,84.079L50.42393,68.87626a6.99993,6.99993,0,1,1,7.03418,12.10439Zm10.2915-23.16221h-.03145A6.99967,6.99967,0,0,1,60.74893,50.788l.13125-30.13725a7.00056,7.00056,0,0,1,6.99931-6.96958h.03145a6.99991,6.99991,0,0,1,6.96924,7.03042l-.13125,30.13725A7.00056,7.00056,0,0,1,67.74961,57.81844Zm46.2875,35.81006a6.997,6.997,0,0,1-9.56211,2.56211L78.27627,81.06473a6.99994,6.99994,0,1,1,7-12.12421L111.475,84.06639A6.99956,6.99956,0,0,1,114.03711,93.6285Z"/></svg>
|
||||||
|
After Width: | Height: | Size: 2.1 KiB |
|
|
@ -0,0 +1 @@
|
||||||
|
<svg id="Layer_1" data-name="Layer 1" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 194.25619 159.08912"><title>sub-project-brand-logo-variants</title><path d="M173.69548,0H20.56071A20.62124,20.62124,0,0,0-.00008,20.56068V138.52845a20.62124,20.62124,0,0,0,20.56079,20.56067H173.69548a20.62124,20.62124,0,0,0,20.56079-20.56067V20.56068A20.62124,20.62124,0,0,0,173.69548,0ZM82.08293,115.68666,44.71086,137.40492a9.9999,9.9999,0,1,1-10.04883-17.292L72.0341,98.39466a9.9999,9.9999,0,1,1,10.04883,17.292ZM96.78508,82.59779h-.04492A9.99956,9.99956,0,0,1,86.7841,72.55433l.1875-43.05322a10.00081,10.00081,0,0,1,9.999-9.95654h.04493a9.99984,9.99984,0,0,1,9.956,10.04345l-.1875,43.05323A10.0008,10.0008,0,0,1,96.78508,82.59779Zm66.125,51.15723a9.99567,9.99567,0,0,1-13.66016,3.66015l-37.42676-21.6084a9.99991,9.99991,0,0,1,10-17.32031l37.42676,21.6084A9.99937,9.99937,0,0,1,162.91008,133.755Z"/></svg>
|
||||||
|
After Width: | Height: | Size: 894 B |
|
|
@ -0,0 +1 @@
|
||||||
|
<svg height="2500" viewBox=".16 0 571.71 800" width="1788" xmlns="http://www.w3.org/2000/svg"><g fill="#13bef9"><path d="m190.83 175.88h-12.2v63.2h12.2zm52.47 0h-12.2v63.2h12.2zm71.69-120.61-12.5-21.68-208.67 120.61 12.5 21.68z"/><path d="m313.77 55.27 12.51-21.68 208.67 120.61-12.51 21.68z"/><path d="m571.87 176.18v-25.03h-571.71v25.03z"/><path d="m345.5 529.77v-370.99h25.02v389.01c-6.71-7.64-15.26-13.13-25.02-18.02zm-42.71-6.41v-523.36h25.02v526.41c-7.02-3.36-24.1-3.05-25.02-3.05zm-237.04 52.21c-30.51-22.59-50.64-58.62-50.64-99.54 0-21.68 5.79-43.05 16.47-61.68h213.55c10.98 18.63 16.48 40 16.48 61.68 0 18.93-2.44 36.64-10.07 52.52-16.17-15.57-39.97-22.29-64.07-22.29-42.71 0-79.32 26.56-88.77 66.26-3.36-.31-5.49-.61-8.85-.61-8.24.3-16.17 1.53-24.1 3.66z" fill-rule="evenodd"/><path d="m170.69 267.18h-64.67v65.03h64.67zm-72.91 0h-64.67v65.03h64.67zm0 72.36h-64.67v65.04h64.67zm72.91 0h-64.67v65.04h64.67zm72.61 0h-64.67v65.04h64.67zm0-107.17h-64.67v65.03h64.67z"/><path d="m109.37 585.34c8.85-37.55 42.71-65.65 82.98-65.65 25.94 0 49.12 11.61 64.99 29.93 13.72-9.47 30.2-14.96 48.2-14.96 46.98 0 85.11 38.16 85.11 85.19 0 9.77-1.52 18.93-4.57 27.78 10.37 14.05 16.78 31.76 16.78 50.69 0 47.02-38.14 85.19-85.12 85.19-20.75 0-39.66-7.33-54.3-19.54-15.56 21.68-40.88 36.03-69.56 36.03-32.95 0-61.63-18.93-75.96-46.41-5.8 1.22-11.6 1.83-17.7 1.83-46.98 0-85.42-38.17-85.42-85.19s38.14-85.19 85.42-85.19c3.05-.31 6.1-.31 9.15.3z" fill-rule="evenodd"/></g></svg>
|
||||||
|
After Width: | Height: | Size: 1.4 KiB |
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 9.3 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
|
@ -21,7 +21,7 @@ mt=3; // material thickness, NOT overall thickness in case of a rim!
|
||||||
rim_t=mt; // thickness of the surrounding rim
|
rim_t=mt; // thickness of the surrounding rim
|
||||||
rim_h=2; // height of the surroundig rim
|
rim_h=2; // height of the surroundig rim
|
||||||
logo_d=rim_h; // thickness of the embossing
|
logo_d=rim_h; // thickness of the embossing
|
||||||
magnet_count=0; // count of magnets
|
magnet_count=4; // count of magnets
|
||||||
magnet_dia=11; // diameter of the magnet-recesses, 1mm bigger won't hurt..
|
magnet_dia=11; // diameter of the magnet-recesses, 1mm bigger won't hurt..
|
||||||
magnet_h=1; // height of the magnets
|
magnet_h=1; // height of the magnets
|
||||||
// ##########################################
|
// ##########################################
|
||||||
|
|
@ -76,11 +76,15 @@ panel();
|
||||||
//translate([0,5,0])logo("SRC/tux.svg",0.65);
|
//translate([0,5,0])logo("SRC/tux.svg",0.65);
|
||||||
//logo("SRC/windows.svg",0.4);
|
//logo("SRC/windows.svg",0.4);
|
||||||
//logo("SRC/freebsd.svg",17);
|
//logo("SRC/freebsd.svg",17);
|
||||||
|
//logo("SRC/openwrt.svg",10);
|
||||||
|
|
||||||
/* container-stuff */
|
/* container-stuff */
|
||||||
//logo("SRC/kubernetes.svg",0.175);
|
//logo("SRC/kubernetes.svg",0.175);
|
||||||
|
//logo("SRC/rancher.svg",1.33);
|
||||||
//logo("SRC/docker.svg",7.5);
|
//logo("SRC/docker.svg",7.5);
|
||||||
//logo("SRC/openwrt.svg",10);
|
//logo("SRC/portainer.svg",0.1);
|
||||||
|
//logo("SRC/k3s.svg",1);
|
||||||
|
//logo("SRC/k3s-alt.svg",1);
|
||||||
|
|
||||||
/* Venors/Hardware */
|
/* Venors/Hardware */
|
||||||
//logo("SRC/ubiquity.svg",1.5);
|
//logo("SRC/ubiquity.svg",1.5);
|
||||||
|
|
@ -89,7 +93,7 @@ panel();
|
||||||
//logo("SRC/cisco-alt.svg",22);
|
//logo("SRC/cisco-alt.svg",22);
|
||||||
|
|
||||||
/* VPNs */
|
/* VPNs */
|
||||||
//logo("SRC/openvpn.svg",0.15);
|
logo("SRC/openvpn.svg",0.15);
|
||||||
//logo("SRC/wireguard.svg",7.5);
|
//logo("SRC/wireguard.svg",7.5);
|
||||||
|
|
||||||
/* Programming Languages/Projects */
|
/* Programming Languages/Projects */
|
||||||
|
|
@ -101,7 +105,7 @@ panel();
|
||||||
//logo("SRC/nodejs.svg",22);
|
//logo("SRC/nodejs.svg",22);
|
||||||
//logo("SRC/snakemake.svg",2.5);
|
//logo("SRC/snakemake.svg",2.5);
|
||||||
//logo("SRC/anaconda.svg",7.5);
|
//logo("SRC/anaconda.svg",7.5);
|
||||||
logo("SRC/angular.svg",7.5);
|
//logo("SRC/angular.svg",7.5);
|
||||||
|
|
||||||
/* Services/Software */
|
/* Services/Software */
|
||||||
//logo("SRC/grafana.svg",8);
|
//logo("SRC/grafana.svg",8);
|
||||||
|
|
|
||||||
|
Before Width: | Height: | Size: 43 KiB After Width: | Height: | Size: 43 KiB |
|
Before Width: | Height: | Size: 39 KiB After Width: | Height: | Size: 39 KiB |
|
|
@ -1,5 +1,5 @@
|
||||||
// supermicro SC808 (and others) fan holder for 2x 40x40x28mm fans instead of 3x 40x40x56mm
|
// supermicro SC808 (and others) fan holder for 2x 40x40x28mm fans instead of 3x 40x40x56mm
|
||||||
// by zeus - 2022-09-09 - CC-BY-NC-SA-4.0 - https://git.kostianix.de/zeus/3d-stuff/openscad/
|
// by zeus - 2022-09-09 - CC-BY-NC-SA-4.0 - https://git.kostianix.de/zeus/3d-stuff/openscad/own/supermicro_sc808t/
|
||||||
// #####################################
|
// #####################################
|
||||||
$fn=100;
|
$fn=100;
|
||||||
mt=1.75;
|
mt=1.75;
|
||||||
|
|
@ -90,5 +90,3 @@ rotate([0,0,180])translate([-base_w/2,0,mt/2])mirror([0,1,0])tab();
|
||||||
|
|
||||||
|
|
||||||
//hole_control();
|
//hole_control();
|
||||||
|
|
||||||
//translate([-6.25,-10.25,-base_h/2])%import("fanholdersrc.stl",center=true);
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
// supermicro SC808 (and others) fan holder for 2x 40x40x28mm fans instead of 3x 40x40x56mm
|
// supermicro SC808 (and others) fan holder for 2x 40x40x28mm fans instead of 3x 40x40x56mm
|
||||||
// by zeus - 2022-09-09 - CC-BY-NC-SA-4.0 - https://git.kostianix.de/zeus/3d-stuff/openscad/
|
// by zeus - 2022-09-09 - CC-BY-NC-SA-4.0 - https://git.kostianix.de/zeus/3d-stuff/openscad/own/supermicro_sc808t/
|
||||||
// #####################################
|
// #####################################
|
||||||
$fn=100;
|
$fn=100;
|
||||||
mt=1.75;
|
mt=1.75;
|
||||||
|
|
@ -80,6 +80,4 @@ translate([-base_w/2,0,mt/2])tab();
|
||||||
rotate([0,0,180])translate([-base_w/2,0,mt/2])tab();
|
rotate([0,0,180])translate([-base_w/2,0,mt/2])tab();
|
||||||
|
|
||||||
|
|
||||||
//hole_control();
|
//hole_control();
|
||||||
|
|
||||||
//translate([-6.25,-10.25,-base_h/2])%import("fanholdersrc.stl",center=true);
|
|
||||||
|
Before Width: | Height: | Size: 41 KiB After Width: | Height: | Size: 41 KiB |
|
Before Width: | Height: | Size: 113 KiB After Width: | Height: | Size: 113 KiB |
|
Before Width: | Height: | Size: 62 KiB After Width: | Height: | Size: 62 KiB |
|
Before Width: | Height: | Size: 125 KiB After Width: | Height: | Size: 125 KiB |
|
Before Width: | Height: | Size: 16 KiB After Width: | Height: | Size: 16 KiB |
|
|
@ -0,0 +1,3 @@
|
||||||
|
The actual model is in SCAD/hdd-holder.scad
|
||||||
|
the folderstructure and the box.scad is from another project that I borrowed from 'Joaquín Fernández'
|
||||||
|
(https://gitlab.com/joaquinfq/openscad/, CC-BY-NC-4.0)
|
||||||
|
Before Width: | Height: | Size: 44 KiB After Width: | Height: | Size: 44 KiB |
|
Before Width: | Height: | Size: 52 KiB After Width: | Height: | Size: 52 KiB |
|
Before Width: | Height: | Size: 60 KiB After Width: | Height: | Size: 60 KiB |
|
|
@ -1,5 +1,5 @@
|
||||||
// supermicro SC808 (and others) I/O-Shields to be able to utilize mITX-boards with extenation-cords that allow for Surface-Mounting
|
// supermicro SC808 (and others) I/O-Shields to be able to utilize mITX-boards with extenation-cords that allow for Surface-Mounting
|
||||||
// by zeus - 2022-09-11 - CC-BY-NC-SA-4.0 - https://git.kostianix.de/zeus/3d-stuff/openscad/
|
// by zeus - 2022-09-11 - CC-BY-NC-SA-4.0 - https://git.kostianix.de/zeus/3d-stuff/openscad/own/supermicro_sc808t/
|
||||||
// #####################################
|
// #####################################
|
||||||
// VARS:
|
// VARS:
|
||||||
// #####################################
|
// #####################################
|
||||||
|
|
@ -198,22 +198,15 @@ module shield_ports(){
|
||||||
translate([-23,-1,-3*mt-q])rotate([0,0,-90])#port_ethernet();
|
translate([-23,-1,-3*mt-q])rotate([0,0,-90])#port_ethernet();
|
||||||
translate([22.5,-1,-3*mt-q])rotate([0,0,-90])#port_ethernet();
|
translate([22.5,-1,-3*mt-q])rotate([0,0,-90])#port_ethernet();
|
||||||
translate([63.5,-1,-3*mt-q])rotate([0,0,-90])#port_ethernet();
|
translate([63.5,-1,-3*mt-q])rotate([0,0,-90])#port_ethernet();
|
||||||
|
|
||||||
|
|
||||||
// slots
|
// slots
|
||||||
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
// #####################################
|
// #####################################
|
||||||
// DRAWING:
|
// DRAWING:
|
||||||
|
|
||||||
// shield_2();
|
shield_grill();
|
||||||
|
|
||||||
//port_ethernet();
|
// shield_ports();
|
||||||
shield_ports();
|
|
||||||
|
|
||||||
|
|
||||||
// todo: add text
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Loading…
Reference in New Issue