diff --git a/PrusaSlicer/PrusaSlicer.ini b/PrusaSlicer/PrusaSlicer.ini
index 30d4319..6ba3d2d 100644
--- a/PrusaSlicer/PrusaSlicer.ini
+++ b/PrusaSlicer/PrusaSlicer.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-16 at 15:37:12 UTC
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-11-11 at 12:44:17 UTC
 auto_toolbar_size = 100
 autocenter = 0
 background_processing = 0
@@ -8,7 +8,7 @@ default_action_on_close_application = none
 default_action_on_select_preset = none
 drop_project_action = 1
 export_sources_full_pathnames = 0
-last_output_path = /home/kostiank/Downloads/3d/calibration/models
+last_output_path = /home/kostiank/Downloads/3d/g
 last_output_path_removable = /media/knki1108/A87B-A154/gcode
 no_controller = 1
 no_defaults = 1
@@ -33,14 +33,18 @@ version_check = 1
 version_online = 2.3.0
 version_online_seen = 2.3.0
 view_mode = expert
-window_mainframe = 1920; 30; 1920; 1123; 0
+window_mainframe = 2560; 30; 2556; 1385; 0
 
 [filaments]
+Generic ABS = 1
 Generic ABS @MINI = 1
+Generic PETG = 1
 Generic PETG @0.6 nozzle MINI = 1
 Generic PETG @MINI = 1
 Generic PLA = 1
+Prusament ASA = 1
 Prusament ASA @MINI = 1
+Prusament PETG = 1
 Prusament PETG @0.6 nozzle MINI = 1
 Prusament PETG @MINI = 1
 Prusament PLA = 1
@@ -55,7 +59,7 @@ sla_print =
 
 [recent]
 config_directory = /home/knki1108/Downloads/3d/calibration/models
-skein_directory = /home/kostiank/Downloads/3d/spk
+skein_directory = /home/knki1108/smb4k/BACKUP.GLA.KOSTIANIX.DE/austausch/Wargaming/Miniaturen (sonstige)/eigene/parametric wargaming base
 
 [recent_projects]
 1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf
@@ -64,3 +68,4 @@ skein_directory = /home/kostiank/Downloads/3d/spk
 
 [vendor:PrusaResearch]
 model:MINI = 0.25;0.4;0.6
+model:MK3S = 0.4
diff --git a/PrusaSlicer/cache/PrusaResearch.idx b/PrusaSlicer/cache/PrusaResearch.idx
index 2150f4a..f73bede 100644
--- a/PrusaSlicer/cache/PrusaResearch.idx
+++ b/PrusaSlicer/cache/PrusaResearch.idx
@@ -1,4 +1,28 @@
+min_slic3r_version = 2.4.0-beta0
+1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI. 
+1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
+min_slic3r_version = 2.4.0-alpha0
+1.4.0-alpha8 Added material profiles for Prusament Resin. Detect bridging perimeters enabled by default. 
+1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles. 
+1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
+1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
+1.4.0-alpha4 Decreased Area Fill (SL1S).
+1.4.0-alpha3 Updated SL1S tilt times.
+1.4.0-alpha2 Updated Prusa MINI machine limits.
+1.4.0-alpha1 Added new SL1S resin profiles.
+1.4.0-alpha0 Bumped up config version.
+1.3.0-alpha2 Added SL1S SPEED profiles.
+1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
+1.3.0-alpha0 Disabled thick bridges, updated support settings.
+min_slic3r_version = 2.3.2-alpha0
+1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
+1.3.2 Added material profiles for Prusament Resin.
+1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
+1.3.0 Added SL1S SPEED profiles.
 min_slic3r_version = 2.3.0-rc1
+1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
+1.2.9 Added material profiles for Prusament Resin.
+1.2.8 Added multiple add:north and Extrudr filament profiles.
 1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
 1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
 1.2.5 Updated firmware version. Added filament profiles. Various improvements.
diff --git a/PrusaSlicer/cache/PrusaResearch.ini b/PrusaSlicer/cache/PrusaResearch.ini
index e011b9c..ba9456c 100644
--- a/PrusaSlicer/cache/PrusaResearch.ini
+++ b/PrusaSlicer/cache/PrusaResearch.ini
@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.2.7
+config_version = 1.2.10
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -123,7 +123,7 @@ technology = SLA
 family = SL1
 bed_model = sl1_bed.stl
 bed_texture = sl1.svg
-default_materials = Prusa Orange Tough @0.05
+default_materials = Prusa Orange Tough @0.05; Prusament Resin Tough Prusa Orange @0.05
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
@@ -1898,7 +1898,7 @@ compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI
 [filament:Prusament PC Blend]
 inherits = *ABS*
 filament_vendor = Prusa Polymers
-filament_cost = 62.36
+filament_cost = 62.36 
 filament_density = 1.22
 filament_spool_weight = 201
 fan_always_on = 0
@@ -2039,6 +2039,150 @@ filament_cost = 27.82
 filament_density = 1.27
 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
+[filament:Extrudr DuraPro ASA]
+inherits = Fillamentum ASA
+filament_vendor = Extrudr
+bed_temperature = 90
+filament_cost = 25.98
+filament_density = 1.05
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120"
+first_layer_bed_temperature = 90
+first_layer_temperature = 220
+temperature = 220
+filament_max_volumetric_speed = 10
+compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+filament_spool_weight = 230
+
+[filament:Extrudr PETG]
+inherits = *PET*
+filament_vendor = Extrudr
+bed_temperature = 70
+filament_cost = 35.45
+filament_density = 1.29
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=94"
+first_layer_bed_temperature = 70
+first_layer_temperature = 220
+temperature = 220
+slowdown_below_layer_time = 20
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_spool_weight = 262
+full_fan_speed_layer = 0
+compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Extrudr PETG @MINI]
+inherits = Extrudr PETG
+filament_vendor = Extrudr
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+compatible_printers_condition = printer_model=="MINI"
+
+[filament:Extrudr XPETG CF]
+inherits = Extrudr PETG
+filament_cost = 49.99
+filament_density = 1.41
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198"
+first_layer_temperature = 235
+temperature = 235
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+filament_spool_weight = 230
+
+[filament:Extrudr XPETG CF @MINI]
+inherits = Extrudr XPETG CF
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
+
+[filament:Extrudr XPETG Matt]
+inherits = Extrudr PETG
+filament_cost = 29.99
+filament_density = 1.41
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=199"
+first_layer_temperature = 230
+temperature = 230
+
+[filament:Extrudr XPETG Matt @MINI]
+inherits = Extrudr XPETG Matt
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+compatible_printers_condition = printer_model=="MINI"
+
+[filament:Extrudr BioFusion]
+inherits = *PLA*
+filament_vendor = Extrudr
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+filament_cost = 31.23
+filament_density = 1.25
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=121"
+first_layer_temperature = 220
+temperature = 220
+max_fan_speed = 45
+min_fan_speed = 25
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K43{endif} ; Filament gcode LA 1.0"
+filament_spool_weight = 230
+
+[filament:Extrudr Flax]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 56.23
+filament_density = 1.45
+filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
+first_layer_temperature = 190
+temperature = 190
+max_fan_speed = 80
+min_fan_speed = 30
+full_fan_speed_layer = 0
+slowdown_below_layer_time = 20
+filament_max_volumetric_speed = 11
+filament_spool_weight = 262
+
+[filament:Extrudr GreenTEC]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 56
+filament_density = 1.3
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=106"
+first_layer_temperature = 208
+temperature = 208
+slowdown_below_layer_time = 20
+filament_spool_weight = 230
+
+[filament:Extrudr GreenTEC Pro]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 56.23
+filament_density = 1.35
+filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134"
+temperature = 215
+max_fan_speed = 80
+min_fan_speed = 30
+full_fan_speed_layer = 0
+slowdown_below_layer_time = 20
+filament_spool_weight = 230
+
+[filament:Extrudr GreenTEC Pro Carbon]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 56.23
+filament_density = 1.2
+filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
+first_layer_temperature = 225
+max_fan_speed = 80
+min_fan_speed = 30
+temperature = 225
+full_fan_speed_layer = 0
+slowdown_below_layer_time = 20
+filament_spool_weight = 230
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
 [filament:Extrudr PLA NX1]
 inherits = *PLA*
 filament_vendor = Extrudr
@@ -2049,20 +2193,318 @@ temperature = 205
 bed_temperature = 60
 first_layer_temperature = 205
 first_layer_bed_temperature = 60
-full_fan_speed_layer = 3
+full_fan_speed_layer = 0
 max_fan_speed = 90
 min_fan_speed = 30
 slowdown_below_layer_time = 20
-filament_spool_weight = 0
+filament_spool_weight = 262
 
 [filament:Extrudr PLA NX2]
 inherits = Extrudr PLA NX1
-filament_vendor = Extrudr
 filament_cost = 23.63
 filament_density = 1.3
 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128"
 filament_spool_weight = 0
 
+[filament:Extrudr Flex Hard]
+inherits = *FLEX*
+filament_vendor = Extrudr
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.2
+filament_cost = 39.98
+filament_density = 1.2
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 3
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
+filament_retract_length = 0.4
+filament_wipe = nil
+filament_spool_weight = 230
+slowdown_below_layer_time = 20
+
+[filament:Extrudr Flex Medium]
+inherits = *FLEX*
+filament_vendor = Extrudr
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.2
+filament_cost = 39.98
+filament_density = 1.19
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 2
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
+filament_retract_length = 0.4
+filament_wipe = nil
+filament_spool_weight = 230
+slowdown_below_layer_time = 20
+
+[filament:Extrudr Flex SemiSoft]
+inherits = *FLEX*
+filament_vendor = Extrudr
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.2
+filament_cost = 39.98
+filament_density = 1.18
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 1.2
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
+filament_retract_length = 0.4
+filament_wipe = nil
+filament_spool_weight = 230
+slowdown_below_layer_time = 20
+
+[filament:addnorth Adamant S1]
+inherits = *FLEX*
+filament_vendor = addnorth
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+filament_cost = 
+filament_density = 1.22
+temperature = 250
+bed_temperature = 50
+first_layer_temperature = 245
+first_layer_bed_temperature = 50
+slowdown_below_layer_time = 20
+min_print_speed = 20
+fan_below_layer_time = 15
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 40
+max_fan_speed = 70
+bridge_fan_speed = 60
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 1.7
+filament_retract_length = 0.6
+filament_retract_lift = 0.5
+filament_spool_weight = 0
+filament_retract_restart_extra = 0.1
+filament_wipe = nil
+
+[filament:addnorth Adura X]
+inherits = *PET*
+filament_vendor = addnorth
+filament_cost = 29.99
+filament_density = 1.27
+filament_type = NYLON
+extrusion_multiplier = 0.98
+bed_temperature = 60
+first_layer_bed_temperature = 60
+first_layer_temperature = 265
+temperature = 270
+fan_always_on = 0
+min_fan_speed = 20
+max_fan_speed = 40
+bridge_fan_speed = 70
+slowdown_below_layer_time = 10
+min_print_speed = 20
+fan_below_layer_time = 10
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+filament_retract_length = 1.4
+filament_retract_lift = 0.4
+filament_max_volumetric_speed = 4
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
+filament_spool_weight = 0
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:addnorth Adura X @MINI]
+inherits = addnorth Adura X
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
+
+[filament:addnorth Adura X @MMU1]
+inherits = addnorth Adura X
+filament_retract_length = nil
+filament_retract_lift = nil
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"
+
+[filament:addnorth E-PLA]
+inherits = *PLA*
+filament_vendor = addnorth
+filament_cost = 24.99
+filament_density = 1.24
+extrusion_multiplier = 0.98
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+full_fan_speed_layer = 3
+slowdown_below_layer_time = 15
+filament_spool_weight = 0
+
+[filament:addnorth ESD-PETG]
+inherits = *PET*
+filament_vendor = addnorth
+filament_cost = 29.99
+filament_density = 1.27
+extrusion_multiplier = 0.98
+bed_temperature = 80
+first_layer_bed_temperature = 85
+first_layer_temperature = 245
+temperature = 265
+fan_always_on = 1
+min_fan_speed = 15
+max_fan_speed = 30
+bridge_fan_speed = 35
+slowdown_below_layer_time = 10
+min_print_speed = 15
+fan_below_layer_time = 8
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+filament_retract_length = 1.2
+filament_retract_lift = 0
+filament_max_volumetric_speed = 2
+filament_spool_weight = 0
+
+[filament:addnorth ESD-PETG @MINI]
+inherits = addnorth ESD-PETG
+filament_retract_length = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 2
+compatible_printers_condition = printer_model=="MINI"
+
+[filament:addnorth ESD-PETG @MMU1]
+inherits = addnorth ESD-PETG
+filament_retract_length = nil
+filament_max_volumetric_speed = 2
+compatible_printers_condition = printer_model=="MK2SMM"
+
+[filament:addnorth OBC Polyethylene]
+inherits = *FLEX*
+filament_vendor = addnorth
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+filament_cost = 82
+filament_density = 1.22
+temperature = 200
+bed_temperature = 100
+first_layer_temperature = 195
+first_layer_bed_temperature = 100
+slowdown_below_layer_time = 5
+fan_below_layer_time = 15
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 20
+max_fan_speed = 30
+bridge_fan_speed = 40
+min_print_speed = 20
+filament_max_volumetric_speed = 4
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+filament_spool_weight = 0
+filament_notes = "Use Magigoo PP bed adhesive or PP packing tape (on a cold printbed)."
+
+[filament:addnorth PETG]
+inherits = *PET*
+filament_vendor = addnorth
+filament_cost = 29.99
+filament_density = 1.27
+bed_temperature = 80
+first_layer_bed_temperature = 85
+first_layer_temperature = 240
+temperature = 250
+fan_always_on = 1
+min_fan_speed = 15
+max_fan_speed = 40
+bridge_fan_speed = 50
+slowdown_below_layer_time = 10
+min_print_speed = 15
+fan_below_layer_time = 15
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+filament_retract_length = 1.4
+filament_max_volumetric_speed = 8
+filament_spool_weight = 0
+
+[filament:addnorth PETG @MINI]
+inherits = addnorth PETG
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 7
+compatible_printers_condition = printer_model=="MINI"
+
+[filament:addnorth PETG @MMU1]
+inherits = addnorth PETG
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_max_volumetric_speed = 7
+compatible_printers_condition = printer_model=="MK2SMM"
+
+[filament:addnorth Rigid X]
+inherits = *PET*
+filament_vendor = addnorth
+filament_cost = 29.99
+filament_density = 1.27
+extrusion_multiplier = 0.98
+bed_temperature = 85
+first_layer_bed_temperature = 90
+first_layer_temperature = 250
+temperature = 260
+fan_always_on = 1
+min_fan_speed = 20
+max_fan_speed = 60
+bridge_fan_speed = 70
+slowdown_below_layer_time = 10
+fan_below_layer_time = 20
+min_print_speed = 20
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+filament_retract_length = 1.4
+filament_max_volumetric_speed = 5
+filament_spool_weight = 0
+filament_notes = "Please use a nozzle that is resistant to abrasive filaments, like hardened steel."
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:addnorth Rigid X @MINI]
+inherits = addnorth Rigid X
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
+
+[filament:addnorth Rigid X @MMU1]
+inherits = addnorth Rigid X
+filament_retract_length = nil
+filament_retract_lift = nil
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"
+
+[filament:addnorth Textura]
+inherits = *PLA*
+filament_vendor = addnorth
+filament_cost = 24.99
+filament_density = 1.24
+extrusion_multiplier = 0.95
+temperature = 215
+bed_temperature = 65
+first_layer_temperature = 215
+first_layer_bed_temperature = 65
+min_fan_speed = 20
+max_fan_speed = 40
+bridge_fan_speed = 60
+full_fan_speed_layer = 0
+slowdown_below_layer_time = 15
+min_print_speed = 20
+filament_spool_weight = 0
+filament_retract_length = 1
+compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:addnorth Textura @MINI]
+inherits = addnorth Textura
+filament_retract_length = nil
+compatible_printers_condition = printer_model=="MINI"
+
+[filament:addnorth Textura @MMU1]
+inherits = addnorth Textura
+filament_retract_length = nil
+compatible_printers_condition = printer_model=="MK2SMM"
+
 [filament:Plasty Mladec PETG]
 inherits = *PET*
 filament_vendor = Plasty Mladec
@@ -2120,16 +2562,43 @@ filament_cost = 33.99
 filament_density = 1.20
 filament_spool_weight = 230
 filament_max_volumetric_speed = 1.2
-filament_retract_length = 0
+filament_retract_length = 0.4
 filament_retract_speed = nil
-filament_retract_lift = nil
+filament_deretract_speed = 20
 fan_always_on = 1
 cooling = 0
-max_fan_speed = 50
-min_fan_speed = 50
+max_fan_speed = 60
+min_fan_speed = 60
 disable_fan_first_layers = 4
 full_fan_speed_layer = 6
 
+[filament:AmazonBasics TPU]
+inherits = *FLEX*
+filament_vendor = AmazonBasics
+fan_always_on = 1
+filament_max_volumetric_speed = 1.8
+extrusion_multiplier = 1.14
+first_layer_temperature = 235
+first_layer_bed_temperature = 50
+temperature = 235
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 80
+min_fan_speed = 80
+filament_retract_before_travel = 3
+filament_cost = 19.99
+filament_density = 1.21
+filament_retract_length = 2
+filament_retract_speed = 45
+filament_deretract_speed = 20
+filament_retract_lift = 0
+filament_wipe = 0
+disable_fan_first_layers = 4
+full_fan_speed_layer = 6
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+
 [filament:SainSmart TPU]
 inherits = *FLEX*
 filament_vendor = SainSmart
@@ -2184,6 +2653,242 @@ min_print_speed = 15
 slowdown_below_layer_time = 10
 cooling = 1
 
+[filament:Filatech FilaFlex30]
+inherits = Filatech FilaFlex40
+temperature = 225
+filament_density = 1.15
+extrusion_multiplier = 1.1
+filament_cost =
+
+[filament:Filatech FilaFlex55]
+inherits = Filatech FilaFlex40
+temperature = 230
+filament_density = 1.18
+bed_temperature = 60
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_cost =
+first_layer_temperature = 235
+extrusion_multiplier = 1
+
+# [filament:Filatech TPE]
+# inherits = Filatech FilaFlex40
+# first_layer_temperature = 230
+# temperature = 225
+# filament_density = 1.2
+# fan_below_layer_time = 60
+# max_fan_speed = 80
+# min_fan_speed = 80
+# fan_always_on = 1
+
+[filament:Filatech TPU]
+inherits = Filatech FilaFlex40
+first_layer_temperature = 230
+filament_density = 1.2
+fan_below_layer_time = 60
+max_fan_speed = 80
+min_fan_speed = 80
+fan_always_on = 1
+temperature = 235
+
+[filament:Filatech ABS]
+inherits = *ABSC*
+filament_vendor = Filatech
+filament_cost = 
+extrusion_multiplier = 0.95
+filament_density = 1.05
+
+[filament:Filatech ABS @MINI]
+inherits = Filatech ABS
+bed_temperature = 100
+filament_retract_length = 2.7
+filament_retract_speed = nil
+filament_deretract_speed = nil
+filament_retract_lift = nil
+filament_retract_before_travel = 3
+filament_wipe = 0
+filament_max_volumetric_speed = 10
+slowdown_below_layer_time = 20
+compatible_printers_condition = printer_model=="MINI"
+start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
+
+[filament:Filatech FilaCarbon]
+inherits = *ABSC*
+filament_vendor = Filatech
+filament_cost = 
+extrusion_multiplier = 0.95
+filament_density = 1.1
+first_layer_bed_temperature = 105
+bed_temperature = 100
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Filatech FilaCarbon @MINI]
+inherits = Filatech FilaCarbon
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_retract_length = 2.7
+filament_retract_speed = nil
+filament_deretract_speed = nil
+filament_retract_lift = nil
+filament_retract_before_travel = 3
+filament_wipe = 0
+filament_max_volumetric_speed = 10
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
+
+[filament:Filatech FilaPLA]
+inherits = *PLA*
+filament_vendor = Filatech
+filament_cost = 
+filament_density = 1.3
+first_layer_temperature = 235
+first_layer_bed_temperature = 50
+temperature = 230
+bed_temperature = 55
+
+[filament:Filatech PLA]
+inherits = *PLA*
+filament_vendor = Filatech
+filament_cost = 
+filament_density = 1.25
+first_layer_temperature = 215
+temperature = 210
+
+[filament:Filatech PLA+]
+inherits = Filatech PLA
+filament_density = 1.24
+
+[filament:Filatech FilaTough]
+inherits = Filatech ABS
+filament_cost = 
+extrusion_multiplier = 0.95
+filament_density = 1.29
+first_layer_temperature = 245
+first_layer_bed_temperature = 80
+temperature = 240
+bed_temperature = 90
+cooling = 0
+filament_max_volumetric_speed = 10
+compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Filatech HIPS]
+inherits = Prusa HIPS
+filament_vendor = Filatech
+filament_cost = 
+filament_density = 1.07
+filament_spool_weight = 
+first_layer_temperature = 230
+first_layer_bed_temperature = 100
+temperature = 225
+bed_temperature = 110
+compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Filatech HIPS @MINI]
+inherits = Filatech HIPS
+bed_temperature = 100
+filament_retract_length = 2.7
+filament_retract_speed = nil
+filament_deretract_speed = nil
+filament_retract_lift = nil
+filament_retract_before_travel = 3
+filament_wipe = 0
+filament_max_volumetric_speed = 10
+slowdown_below_layer_time = 20
+compatible_printers_condition = printer_model=="MINI"
+start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
+
+[filament:Filatech PA]
+inherits = *ABSC*
+filament_vendor = Filatech
+filament_cost = 
+filament_density = 1.1
+first_layer_temperature = 275
+first_layer_bed_temperature = 110
+temperature = 275
+bed_temperature = 115
+fan_always_on = 0
+cooling = 0
+bridge_fan_speed = 25
+filament_type = NYLON
+filament_max_volumetric_speed = 8
+compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Filatech PA @MK2]
+inherits = Filatech PA
+first_layer_bed_temperature = 105
+bed_temperature = 110
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Filatech PA @MINI]
+inherits = Filatech PA
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_max_volumetric_speed = 6
+compatible_printers_condition = printer_model=="MINI"
+
+[filament:Filatech PC]
+inherits = Filatech PA
+first_layer_bed_temperature = 110
+bed_temperature = 115
+filament_density = 1.2
+filament_type = PC
+
+[filament:Filatech PC @MK2]
+inherits = Filatech PC
+first_layer_bed_temperature = 105
+bed_temperature = 110
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Filatech PC-ABS]
+inherits = Filatech PC
+first_layer_temperature = 270
+temperature = 270
+first_layer_bed_temperature = 110
+bed_temperature = 115
+filament_density = 1.08
+filament_type = PC
+fan_always_on = 0
+cooling = 1
+extrusion_multiplier = 0.95
+disable_fan_first_layers = 6
+
+[filament:Filatech PC-ABS @MK2]
+inherits = Filatech PC-ABS
+first_layer_bed_temperature = 105
+bed_temperature = 110
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Filatech PETG]
+inherits = *PET*
+filament_vendor = Filatech
+filament_cost = 
+filament_density = 1.27
+first_layer_temperature = 240
+first_layer_bed_temperature = 75
+temperature = 245
+bed_temperature = 80
+extrusion_multiplier = 0.95
+fan_always_on = 0
+
+[filament:Filatech PETG @MINI]
+inherits = Filatech PETG
+filament_retract_length = nil
+filament_retract_speed = 40
+filament_deretract_speed = 25
+filament_retract_lift = nil
+filament_retract_before_travel = 1
+filament_max_volumetric_speed = 7
+compatible_printers_condition = printer_model=="MINI"
+start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
+
+[filament:Filatech Wood-PLA]
+inherits = Filatech PLA
+filament_cost = 
+filament_density = 1.05
+first_layer_temperature = 210
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
 [filament:Polymaker PC-Max]
 inherits = *ABS*
 filament_vendor = Polymaker
@@ -2702,12 +3407,19 @@ filament_cost = 35.48
 filament_density = 1.24
 filament_spool_weight = 230
 
-[filament:SemiFlex or Flexfill 98A]
+[filament:SemiFlex]
 inherits = *FLEX*
+renamed_from = "SemiFlex or Flexfill 98A"
 filament_vendor = Generic
 filament_cost = 82.26
 filament_density = 1.22
+extrusion_multiplier = 1.12
 filament_max_volumetric_speed = 1.35
+fan_always_on = 1
+cooling = 0
+max_fan_speed = 30
+min_fan_speed = 30
+filament_retract_length = nil
 
 [filament:Fillamentum Flexfill 98A]
 inherits = *FLEX*
@@ -2715,13 +3427,16 @@ filament_vendor = Fillamentum
 filament_cost = 82.26
 filament_density = 1.23
 filament_spool_weight = 230
+extrusion_multiplier = 1.12
 filament_max_volumetric_speed = 1.35
 fan_always_on = 1
 cooling = 0
-max_fan_speed = 50
-min_fan_speed = 50
+max_fan_speed = 60
+min_fan_speed = 60
 disable_fan_first_layers = 4
 full_fan_speed_layer = 6
+filament_retract_length = 1.2
+filament_deretract_speed = 20
 
 [filament:Taulman Bridge]
 inherits = *common*
@@ -3177,16 +3892,22 @@ fan_always_on = 1
 max_fan_speed = 15
 min_fan_speed = 15
 
-[filament:SemiFlex or Flexfill 98A @MMU1]
+[filament:SemiFlex @MMU1]
 inherits = *FLEX*
+renamed_from = "SemiFlex or Flexfill 98A @MMU1"
 filament_vendor = Generic
 filament_cost = 82.26
 filament_density = 1.22
+extrusion_multiplier = 1.12
 filament_max_volumetric_speed = 1.35
 filament_retract_length = nil
 filament_retract_speed = nil
 filament_retract_lift = nil
 compatible_printers_condition = printer_model=="MK2SMM"
+fan_always_on = 1
+cooling = 0
+max_fan_speed = 30
+min_fan_speed = 30
 
 [filament:Generic FLEX @MMU1]
 inherits = *FLEX*
@@ -3483,16 +4204,18 @@ filament_spool_weight = 201
 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8
 
 [filament:Fillamentum Flexfill 98A @MINI]
-inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
+inherits = SemiFlex; *FLEXMINI*
 filament_vendor = Fillamentum
 first_layer_temperature = 240
 temperature = 240
 filament_max_volumetric_speed = 1.35
 filament_cost = 82.26
 filament_spool_weight = 230
+max_fan_speed = 60
+min_fan_speed = 60
 
 [filament:Generic FLEX @MINI]
-inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
+inherits = SemiFlex; *FLEXMINI*
 filament_vendor = Generic
 fan_always_on = 0
 bridge_fan_speed = 80
@@ -3572,12 +4295,12 @@ filament_cost = 33.95
 bridge_fan_speed = 70
 fan_always_on = 1
 cooling = 0
-max_fan_speed = 50
-min_fan_speed = 50
+max_fan_speed = 60
+min_fan_speed = 60
 filament_max_volumetric_speed = 1.2
 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
 disable_fan_first_layers = 4
-extrusion_multiplier = 1.2
+extrusion_multiplier = 1.15
 start_filament_gcode = "M900 K0 ; Filament gcode"
 
 [filament:Fillamentum CPE @MINI]
@@ -4084,7 +4807,7 @@ slowdown_below_layer_time = 20
 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"
 
 [sla_print:*common*]
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
+compatible_printers_condition = printer_model=="SL1"
 layer_height = 0.05
 output_filename_format = [input_filename_base].sl1
 pad_edge_radius = 0.5
@@ -4092,7 +4815,7 @@ pad_enable = 1
 pad_max_merge_distance = 50
 pad_wall_height = 0
 pad_wall_thickness = 1
-pad_wall_slope = 90
+pad_wall_slope = 45
 slice_closing_radius = 0.005
 support_base_diameter = 3
 support_base_height = 1
@@ -4111,6 +4834,8 @@ support_pillar_widening_factor = 0
 supports_enable = 1
 support_small_pillar_diameter_percent = 60%
 
+# SL1 #
+
 [sla_print:0.025 UltraDetail]
 inherits = *common*
 layer_height = 0.025
@@ -4133,8 +4858,8 @@ support_pillar_diameter = 1.3
 
 ########### Materials
 
-[sla_material:*common 0.05*]
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
+[sla_material:*common*]
+compatible_printers_condition = printer_model=="SL1"
 compatible_prints_condition = layer_height == 0.05
 exposure_time = 12
 initial_exposure_time = 45
@@ -4143,21 +4868,24 @@ material_correction = 1,1,1
 material_notes = 
 
 [sla_material:*common 0.025*]
-inherits = *common 0.05*
+inherits = *common*
 compatible_prints_condition = layer_height == 0.025
 exposure_time = 10
 initial_exposure_time = 35
 initial_layer_height = 0.025
 
 [sla_material:*common 0.035*]
-inherits = *common 0.05*
+inherits = *common*
 compatible_prints_condition = layer_height == 0.035
 exposure_time = 13
 initial_exposure_time = 40
 initial_layer_height = 0.035
 
+[sla_material:*common 0.05*]
+inherits = *common*
+
 [sla_material:*common 0.1*]
-inherits = *common 0.05*
+inherits = *common*
 compatible_prints_condition = layer_height == 0.1
 exposure_time = 20
 initial_exposure_time = 45
@@ -4179,14 +4907,14 @@ initial_exposure_time = 30
 material_type = Tough
 material_vendor = 3DM
 
-[sla_material:3DM-TOUGH Clear 0.025]
+[sla_material:3DM-TOUGH Clear @0.025]
 inherits = *common 0.025*
 exposure_time = 9
 initial_exposure_time = 30
 material_type = Tough
 material_vendor = 3DM
 
-[sla_material:3DM-HR Red Wine 0.025]
+[sla_material:3DM-HR Red Wine @0.025]
 inherits = *common 0.025*
 exposure_time = 14
 initial_exposure_time = 35
@@ -4332,8 +5060,32 @@ exposure_time = 4
 initial_exposure_time = 35
 material_type = Tough
 material_vendor = Monocure
+
+## Prusa Polymers 0.025
+
+[sla_material:Prusament Resin Tough Prusa Orange @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Rich Black @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Anthracite Grey @0.025]
+inherits = *common 0.025*
+exposure_time = 6
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+  
+## Prusa 0.025
   
-## Prusa
 [sla_material:Prusa Orange Tough @0.025]
 inherits = *common 0.025*
 exposure_time = 6
@@ -4819,7 +5571,7 @@ initial_exposure_time = 30
 material_type = Tough
 material_vendor = 3DM
 
-[sla_material:3DM-TOUGH Clear 0.05]
+[sla_material:3DM-TOUGH Clear @0.05]
 inherits = *common 0.05*
 exposure_time = 15
 initial_exposure_time = 30
@@ -5022,7 +5774,30 @@ initial_exposure_time = 35
 material_type = Tough
 material_vendor = Zortrax
 
-## Prusa
+## Prusa Polymers 0.05
+
+[sla_material:Prusament Resin Tough Prusa Orange @0.05]
+inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Rich Black @0.05]
+inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Anthracite Grey @0.05]
+inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+
+## Prusa 0.05
 
 [sla_material:Prusa Beige Tough @0.05]
 inherits = *common 0.05*
@@ -5284,7 +6059,30 @@ initial_exposure_time = 50
 material_type = Tough
 material_vendor = BlueCast
 
-## Prusa
+## Prusa Polymers 0.1
+
+[sla_material:Prusament Resin Tough Prusa Orange @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Rich Black @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Anthracite Grey @0.1]
+inherits = *common 0.1*
+exposure_time = 14
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Prusa Polymers
+
+## Prusa 0.1
 
 [sla_material:Prusa Orange Tough @0.1]
 inherits = *common 0.1*
diff --git a/PrusaSlicer/filament/PLA_Geetech_Black.ini b/PrusaSlicer/filament/PLA_Geetech_Black.ini
new file mode 100644
index 0000000..9b76182
--- /dev/null
+++ b/PrusaSlicer/filament/PLA_Geetech_Black.ini
@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 14:26:28 UTC
+bed_temperature = 65
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.95
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #0EFB7C
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 20
+filament_density = 1.18
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 65
+first_layer_temperature = 200
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 8
+start_filament_gcode = "; Filament gcode\n"
+temperature = 195
diff --git a/PrusaSlicer/filament/sparky.ini b/PrusaSlicer/filament/sparky.ini
new file mode 100644
index 0000000..5f5a346
--- /dev/null
+++ b/PrusaSlicer/filament/sparky.ini
@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-20 at 21:08:45 UTC
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 65
+first_layer_temperature = 200
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 200
diff --git a/PrusaSlicer/print/sparky.ini b/PrusaSlicer/print/sparky.ini
new file mode 100644
index 0000000..2b19371
--- /dev/null
+++ b/PrusaSlicer/print/sparky.ini
@@ -0,0 +1,122 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 10:26:16 UTC
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.3
+first_layer_speed = 30
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.3
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 10
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thin_walls = 1
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 20
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_speed = 130
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
diff --git a/PrusaSlicer/printer/sparky.ini b/PrusaSlicer/printer/sparky.ini
new file mode 100644
index 0000000..4713d40
--- /dev/null
+++ b/PrusaSlicer/printer/sparky.ini
@@ -0,0 +1,77 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-22 at 23:05:45 UTC
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,177x0,177x175,0x175
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 0
+end_gcode = M104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nG28 X0  ; home X axis\nM84     ; disable motors\nM106 S255 ; Cooldown Hotend\nG4 S30 ; wait 30secs\nM107 ; turn off Fan \n
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_x = 9000,1000
+machine_max_acceleration_y = 9000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 5,5
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 145
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0.1
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 1
+single_extruder_multi_material = 0
+start_gcode = G28 ; home all axes\nG1 X0 Y0 Z3 F2500 ; lift nozzle\nG92 E0 ;Reset Extruder\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature] ; wait for nozzle\nG1 X1 Y0 Z[first_layer_height] F5000.0\nG1 X150 Y0 F1500.0 E12 ; Draw line\nG1 X150 Y5 F5000 ; wipe\nG1 Z1 F2500; lift\nG92 E0; reset Extruder
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
diff --git a/PrusaSlicer/vendor/PrusaResearch.idx b/PrusaSlicer/vendor/PrusaResearch.idx
index 2150f4a..f73bede 100644
--- a/PrusaSlicer/vendor/PrusaResearch.idx
+++ b/PrusaSlicer/vendor/PrusaResearch.idx
@@ -1,4 +1,28 @@
+min_slic3r_version = 2.4.0-beta0
+1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI. 
+1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
+min_slic3r_version = 2.4.0-alpha0
+1.4.0-alpha8 Added material profiles for Prusament Resin. Detect bridging perimeters enabled by default. 
+1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles. 
+1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
+1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
+1.4.0-alpha4 Decreased Area Fill (SL1S).
+1.4.0-alpha3 Updated SL1S tilt times.
+1.4.0-alpha2 Updated Prusa MINI machine limits.
+1.4.0-alpha1 Added new SL1S resin profiles.
+1.4.0-alpha0 Bumped up config version.
+1.3.0-alpha2 Added SL1S SPEED profiles.
+1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
+1.3.0-alpha0 Disabled thick bridges, updated support settings.
+min_slic3r_version = 2.3.2-alpha0
+1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
+1.3.2 Added material profiles for Prusament Resin.
+1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
+1.3.0 Added SL1S SPEED profiles.
 min_slic3r_version = 2.3.0-rc1
+1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
+1.2.9 Added material profiles for Prusament Resin.
+1.2.8 Added multiple add:north and Extrudr filament profiles.
 1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
 1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
 1.2.5 Updated firmware version. Added filament profiles. Various improvements.