added prusaslicer config folder
parent
76d198a166
commit
9a0720f7a5
|
|
@ -0,0 +1,66 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-16 at 15:37:12 UTC
|
||||
auto_toolbar_size = 100
|
||||
autocenter = 0
|
||||
background_processing = 0
|
||||
collapsed_sidebar = 0
|
||||
custom_toolbar_size = 100
|
||||
default_action_on_close_application = none
|
||||
default_action_on_select_preset = none
|
||||
drop_project_action = 1
|
||||
export_sources_full_pathnames = 0
|
||||
last_output_path = /home/kostiank/Downloads/3d/calibration/models
|
||||
last_output_path_removable = /media/knki1108/A87B-A154/gcode
|
||||
no_controller = 1
|
||||
no_defaults = 1
|
||||
preset_update = 1
|
||||
remember_output_path = 1
|
||||
remember_output_path_removable = 1
|
||||
reverse_mouse_wheel_zoom = 0
|
||||
seq_top_layer_only = 1
|
||||
show_drop_project_dialog = 1
|
||||
show_incompatible_presets = 0
|
||||
show_splash_screen = 1
|
||||
single_instance = 0
|
||||
tls_accepted_cert_store_location = /etc/ssl/certs/ca-certificates.crt
|
||||
tls_cert_store_accepted = yes
|
||||
translation_language = en_GB
|
||||
use_custom_toolbar_size = 0
|
||||
use_free_camera = 0
|
||||
use_inches = 0
|
||||
use_perspective_camera = 0
|
||||
version = 2.3.0+linux-x64
|
||||
version_check = 1
|
||||
version_online = 2.3.0
|
||||
version_online_seen = 2.3.0
|
||||
view_mode = expert
|
||||
window_mainframe = 1920; 30; 1920; 1123; 0
|
||||
|
||||
[filaments]
|
||||
Generic ABS @MINI = 1
|
||||
Generic PETG @0.6 nozzle MINI = 1
|
||||
Generic PETG @MINI = 1
|
||||
Generic PLA = 1
|
||||
Prusament ASA @MINI = 1
|
||||
Prusament PETG @0.6 nozzle MINI = 1
|
||||
Prusament PETG @MINI = 1
|
||||
Prusament PLA = 1
|
||||
|
||||
[presets]
|
||||
filament = PETG-DasFilament_Saphirblau
|
||||
physical_printer =
|
||||
print = delta
|
||||
printer = delta
|
||||
sla_material =
|
||||
sla_print =
|
||||
|
||||
[recent]
|
||||
config_directory = /home/knki1108/Downloads/3d/calibration/models
|
||||
skein_directory = /home/kostiank/Downloads/3d/spk
|
||||
|
||||
[recent_projects]
|
||||
1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf
|
||||
2 = /home/knki1108/Downloads/3d/calibration/models/3DBenchy.3mf
|
||||
3 = /home/kostiank/Bilder/anderes/print issues top surface/kossel_2020_shells_plain.3mf
|
||||
|
||||
[vendor:PrusaResearch]
|
||||
model:MINI = 0.25;0.4;0.6
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel.
|
||||
0.0.5 Updated end g-code.
|
||||
min_slic3r_version = 2.3.0-alpha2
|
||||
0.0.4 Fixed predator output filaname format, infill overlap.
|
||||
0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator
|
||||
0.0.2 Added Anycubic Predator
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.1 Initial Version
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.3 Removed obsolete host keys.
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
0.0.2 General print quality improvements
|
||||
0.0.1 Multiple Print models were unified into a single one.
|
||||
0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
|
||||
0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
|
||||
0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
|
||||
0.0.1-alpha12 github repo created for version history
|
||||
0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
|
||||
0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 2.2.0-alpha2
|
||||
min_slic3r_version = 2.2.0-alpha0
|
||||
0.0.1-alpha Initial version
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
min_slic3r_version = 2.3.0-rc2
|
||||
0.0.12 Added Ender-3V2 and filament profiles.
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.
|
||||
0.0.10 Parameter consistency improvements. Enabled conservative elephant foot compensation.
|
||||
0.0.9 Fixed end g-code for Ender 5.
|
||||
0.0.8 Slight end g-code improvements and spool weights.
|
||||
min_slic3r_version = 2.3.0-alpha2
|
||||
0.0.7 Updated start g-code for Creality printers.
|
||||
0.0.6 Added filament profiles, adjusted temperatures, updated start g-code for some models.
|
||||
0.0.5 Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. Updated OPTIMAL print profile.
|
||||
0.0.4 Added initial CR-10 profile, end g-code improvements.
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.3 Added Ender-2, Ender-3 BLTouch, updated Ender-3 bed texture.
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
0.0.2 Updated for PrusaSlicer 2.2.0-rc
|
||||
0.0.2-beta Update for PrusaSlicer 2.2.0-beta
|
||||
0.0.2-alpha1 Extended list of default filaments to be installed
|
||||
0.0.2-alpha0 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 2.2.0-alpha2
|
||||
min_slic3r_version = 2.2.0-alpha0
|
||||
0.0.1 Initial version
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
min_slic3r_version = 2.3.0-rc2
|
||||
0.0.1 Initial Version
|
||||
|
|
@ -0,0 +1,4 @@
|
|||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.2 Removed obsolete host keys
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
0.0.1 Initial version
|
||||
|
|
@ -0,0 +1,165 @@
|
|||
min_slic3r_version = 2.3.0-rc1
|
||||
1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
|
||||
1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
|
||||
1.2.5 Updated firmware version. Added filament profiles. Various improvements.
|
||||
1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
|
||||
1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.2.1 Updated FW version for MK2.5 family printers.
|
||||
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
||||
min_slic3r_version = 2.3.0-beta0
|
||||
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
||||
min_slic3r_version = 2.3.0-alpha4
|
||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.2.0-alpha0 Added filament spool weights
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
1.1.14 Updated firmware version.
|
||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.1.10 Updated firmware version.
|
||||
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
||||
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
||||
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
||||
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
||||
1.1.4 Added Prusament PC Blend filament profile.
|
||||
1.1.3 Added SLA material and filament profile
|
||||
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
||||
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
||||
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
||||
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
||||
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 2.2.0-alpha2
|
||||
min_slic3r_version = 2.2.0-alpha0
|
||||
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
||||
min_slic3r_version = 2.1.1-beta0
|
||||
1.0.12 Updated firmware version.
|
||||
1.0.11 Updated firmware version.
|
||||
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
||||
1.0.7 Updated layer height limits for MINI
|
||||
1.0.6 Added Prusa MINI profiles
|
||||
min_slic3r_version = 2.1.0-alpha0
|
||||
1.0.5 Added SLA materials
|
||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
||||
1.0.3 Added filament profiles
|
||||
1.0.2 Added SLA materials
|
||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
||||
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
||||
1.0.0-alpha2 Printer model and nozzle diameter check
|
||||
1.0.0-alpha1 Added Prusament ASA profile
|
||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
||||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.11 Updated firmware version.
|
||||
0.8.10 Updated firmware version.
|
||||
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.7 Updated firmware version
|
||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.8.5 Updated SL1 printer and material settings
|
||||
0.8.4 Added Prusament ASA profile
|
||||
0.8.3 FW version and SL1 materials update
|
||||
0.8.2 FFF and SL1 settings update
|
||||
0.8.1 Output settings and SLA materials update
|
||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.8.0-rc1 Updated SLA profiles
|
||||
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
||||
0.8.0-beta4 Updated SLA profiles
|
||||
0.8.0-beta3 Updated SLA profiles
|
||||
0.8.0-beta2 Updated SLA profiles
|
||||
0.8.0-beta1 Updated SLA profiles
|
||||
0.8.0-beta Updated SLA profiles
|
||||
0.8.0-alpha9 Updated SLA and FFF profiles
|
||||
0.8.0-alpha8 Updated SLA profiles
|
||||
0.8.0-alpha7 Updated SLA profiles
|
||||
0.8.0-alpha6 Updated SLA profiles
|
||||
min_slic3r_version = 1.42.0-alpha
|
||||
0.8.0-alpha Updated SLA profiles
|
||||
0.4.0-alpha4 Updated SLA profiles
|
||||
0.4.0-alpha3 Update of SLA profiles
|
||||
0.4.0-alpha2 First SLA profiles
|
||||
min_slic3r_version = 1.41.3-alpha
|
||||
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.10 Updated firmware version
|
||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.4.8 MK2.5/3/S FW update
|
||||
0.4.7 MK2/S/MMU FW update
|
||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.1 New MK2.5S and MK3S FW versions
|
||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
min_slic3r_version = 1.41.1
|
||||
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.3.10 Updated firmware version
|
||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.3.8 MK2.5/3/S FW update
|
||||
0.3.7 MK2/S/MMU FW update
|
||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
||||
0.3.5 New MK2.5 and MK3 FW versions
|
||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.3.3 Prusament PETG released
|
||||
0.3.2 New MK2.5 and MK3 FW versions
|
||||
0.3.1 New MK2.5 and MK3 FW versions
|
||||
0.3.0 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.9 New MK2.5 and MK3 FW versions
|
||||
0.2.8 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.1
|
||||
0.2.7 New MK2.5 and MK3 FW version
|
||||
0.2.6 Added MMU2 MK2.5 settings
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.5 Prusament is out - added prusament settings
|
||||
0.2.4 Added soluble support profiles for MMU2
|
||||
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
||||
0.2.2 Edited MMU2 Single mode purge line
|
||||
0.2.1 Added PET and BVOH settings for MMU2
|
||||
0.2.0-beta5 Fixed MMU1 ramming parameters
|
||||
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
||||
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
||||
0.2.0-beta2 Edited first layer speed and wipe tower position
|
||||
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
||||
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
||||
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
||||
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
||||
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
||||
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
||||
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.18 Updated firmware version
|
||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.1.16 MK2.5/3/S FW update
|
||||
0.1.15 MK2/S/MMU FW update
|
||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
||||
0.1.13 New MK2.5 and MK3 FW versions
|
||||
0.1.12 New MK2.5 and MK3 FW versions
|
||||
0.1.11 fw version changed to 3.3.1
|
||||
0.1.10 MK3 jerk and acceleration update
|
||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
||||
0.1.6 Split the MK2.5 profile from the MK2S
|
||||
min_slic3r_version = 1.40.0-beta
|
||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||
0.1.4 edited fw version, added z-raise after print
|
||||
min_slic3r_version = 1.40.0-alpha
|
||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
||||
0.1.2 Wipe tower changes
|
||||
0.1.1 Minor print speed adjustments
|
||||
0.1.0 Initial
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,8 @@
|
|||
min_slic3r_version = 2.3.0-alpha3
|
||||
0.0.6 Added material TPU 93A (SMARTFIL)
|
||||
0.0.5 Removed obsolete host keys.
|
||||
0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials
|
||||
0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.2 Added 0.15mm print profile
|
||||
0.0.1 Initial TriLAB bundle
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-27 at 05:24:47 UTC
|
||||
bed_temperature = 75
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.99
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 30
|
||||
filament_colour = #1730DD
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 25
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = PETG-DasFilament_Saphirblau
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 70
|
||||
first_layer_temperature = 235
|
||||
full_fan_speed_layer = 3
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 240
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 235
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 230
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -0,0 +1,122 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 1
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.92
|
||||
bridge_speed = 50
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.4
|
||||
external_perimeter_speed = 40
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.4
|
||||
fill_angle = 45
|
||||
fill_density = 30%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.45
|
||||
first_layer_height = 0.25
|
||||
first_layer_speed = 30
|
||||
gap_fill_speed = 30
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 13%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 20
|
||||
ironing_type = top
|
||||
layer_height = 0.25
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.4
|
||||
perimeter_speed = 60
|
||||
perimeters = 4
|
||||
post_process =
|
||||
print_settings_id = delta
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 4
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.25
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 80
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 30
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 1
|
||||
travel_speed = 200
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,77 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-31 at 16:56:56 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
color_change_gcode = M600
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S60; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_limits_usage = emit_to_gcode
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = M601
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.15
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 35
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
template_custom_gcode =
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:16 UTC
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 200
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 200
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 50%
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.35
|
||||
first_layer_speed = 30
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.3
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 0
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 20
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 15
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 130
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:16 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 500,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 500,200
|
||||
machine_max_feedrate_y = 500,200
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 10,10
|
||||
machine_max_jerk_y = 10,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 200
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-09-06 at 20:59:15 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20200906T205915Z
|
||||
time_captured = 20200906T205915Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = delta
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.2
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-12 at 05:06:14 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #6432E8
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 0
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-09-24 at 14:30:47 UTC
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 90
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 0
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 62
|
||||
first_layer_temperature = 195
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 195
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 01:57:43 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 50
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-11 at 19:45:55 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nG28 ; home \nM84 ; disable motors\n\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 1.85
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.4
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X-65 Y42 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X-67 Y40 Z0.3 F3000 ; move down\nG1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-12 at 19:12:58 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20201012T191258Z
|
||||
time_captured = 20201012T191258Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = PLA_Noulei-Silk BlueSilver_Silk Blue
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.8
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 13:56:15 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 50
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-11 at 19:45:55 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nG28 ; home \nM84 ; disable motors\n\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 1.85
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.4
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X-65 Y42 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X-67 Y40 Z0.3 F3000 ; move down\nG1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-30 at 21:39:05 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20201030T213905Z
|
||||
time_captured = 20201030T213905Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = PLA_Noulei-Silk Filaments
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.9
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 235
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 230
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-17 at 13:29:52 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 50%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 15
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.3
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 15
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 4
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 4
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.23
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 25
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 222
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-07 at 20:30:02 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.3
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-12-23 at 21:26:23 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20201223T212623Z
|
||||
time_captured = 20201223T212623Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = PLA_Noulei-Silk Filaments
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.10
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,57 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-18 at 11:28:23 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 30
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = PETG-DasFilament_Saphirblau
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 225
|
||||
full_fan_speed_layer = 0
|
||||
inherits =
|
||||
max_fan_speed = 85
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 220
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 235
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 230
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -0,0 +1,122 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-18 at 22:33:05 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 20
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 15
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 12%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 20
|
||||
ironing_type = top
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 4
|
||||
post_process =
|
||||
print_settings_id = delta
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.23
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 25
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 222
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-07 at 20:30:02 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.3
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-21 at 11:46:13 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20210221T114613Z
|
||||
time_captured = 20210221T114613Z
|
||||
slic3r_version_captured = 2.3.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
sla_print =
|
||||
filament = PETG-DasFilament_Saphirblau
|
||||
sla_material =
|
||||
printer = delta
|
||||
physical_printer =
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.11
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,165 @@
|
|||
min_slic3r_version = 2.3.0-rc1
|
||||
1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
|
||||
1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
|
||||
1.2.5 Updated firmware version. Added filament profiles. Various improvements.
|
||||
1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
|
||||
1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.2.1 Updated FW version for MK2.5 family printers.
|
||||
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
||||
min_slic3r_version = 2.3.0-beta0
|
||||
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
||||
min_slic3r_version = 2.3.0-alpha4
|
||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.2.0-alpha0 Added filament spool weights
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
1.1.14 Updated firmware version.
|
||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.1.10 Updated firmware version.
|
||||
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
||||
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
||||
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
||||
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
||||
1.1.4 Added Prusament PC Blend filament profile.
|
||||
1.1.3 Added SLA material and filament profile
|
||||
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
||||
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
||||
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
||||
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
||||
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 2.2.0-alpha2
|
||||
min_slic3r_version = 2.2.0-alpha0
|
||||
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
||||
min_slic3r_version = 2.1.1-beta0
|
||||
1.0.12 Updated firmware version.
|
||||
1.0.11 Updated firmware version.
|
||||
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
||||
1.0.7 Updated layer height limits for MINI
|
||||
1.0.6 Added Prusa MINI profiles
|
||||
min_slic3r_version = 2.1.0-alpha0
|
||||
1.0.5 Added SLA materials
|
||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
||||
1.0.3 Added filament profiles
|
||||
1.0.2 Added SLA materials
|
||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
||||
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
||||
1.0.0-alpha2 Printer model and nozzle diameter check
|
||||
1.0.0-alpha1 Added Prusament ASA profile
|
||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
||||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.11 Updated firmware version.
|
||||
0.8.10 Updated firmware version.
|
||||
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.7 Updated firmware version
|
||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.8.5 Updated SL1 printer and material settings
|
||||
0.8.4 Added Prusament ASA profile
|
||||
0.8.3 FW version and SL1 materials update
|
||||
0.8.2 FFF and SL1 settings update
|
||||
0.8.1 Output settings and SLA materials update
|
||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.8.0-rc1 Updated SLA profiles
|
||||
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
||||
0.8.0-beta4 Updated SLA profiles
|
||||
0.8.0-beta3 Updated SLA profiles
|
||||
0.8.0-beta2 Updated SLA profiles
|
||||
0.8.0-beta1 Updated SLA profiles
|
||||
0.8.0-beta Updated SLA profiles
|
||||
0.8.0-alpha9 Updated SLA and FFF profiles
|
||||
0.8.0-alpha8 Updated SLA profiles
|
||||
0.8.0-alpha7 Updated SLA profiles
|
||||
0.8.0-alpha6 Updated SLA profiles
|
||||
min_slic3r_version = 1.42.0-alpha
|
||||
0.8.0-alpha Updated SLA profiles
|
||||
0.4.0-alpha4 Updated SLA profiles
|
||||
0.4.0-alpha3 Update of SLA profiles
|
||||
0.4.0-alpha2 First SLA profiles
|
||||
min_slic3r_version = 1.41.3-alpha
|
||||
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.10 Updated firmware version
|
||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.4.8 MK2.5/3/S FW update
|
||||
0.4.7 MK2/S/MMU FW update
|
||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.1 New MK2.5S and MK3S FW versions
|
||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
min_slic3r_version = 1.41.1
|
||||
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.3.10 Updated firmware version
|
||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.3.8 MK2.5/3/S FW update
|
||||
0.3.7 MK2/S/MMU FW update
|
||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
||||
0.3.5 New MK2.5 and MK3 FW versions
|
||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.3.3 Prusament PETG released
|
||||
0.3.2 New MK2.5 and MK3 FW versions
|
||||
0.3.1 New MK2.5 and MK3 FW versions
|
||||
0.3.0 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.9 New MK2.5 and MK3 FW versions
|
||||
0.2.8 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.1
|
||||
0.2.7 New MK2.5 and MK3 FW version
|
||||
0.2.6 Added MMU2 MK2.5 settings
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.5 Prusament is out - added prusament settings
|
||||
0.2.4 Added soluble support profiles for MMU2
|
||||
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
||||
0.2.2 Edited MMU2 Single mode purge line
|
||||
0.2.1 Added PET and BVOH settings for MMU2
|
||||
0.2.0-beta5 Fixed MMU1 ramming parameters
|
||||
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
||||
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
||||
0.2.0-beta2 Edited first layer speed and wipe tower position
|
||||
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
||||
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
||||
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
||||
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
||||
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
||||
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
||||
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.18 Updated firmware version
|
||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.1.16 MK2.5/3/S FW update
|
||||
0.1.15 MK2/S/MMU FW update
|
||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
||||
0.1.13 New MK2.5 and MK3 FW versions
|
||||
0.1.12 New MK2.5 and MK3 FW versions
|
||||
0.1.11 fw version changed to 3.3.1
|
||||
0.1.10 MK3 jerk and acceleration update
|
||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
||||
0.1.6 Split the MK2.5 profile from the MK2S
|
||||
min_slic3r_version = 1.40.0-beta
|
||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||
0.1.4 edited fw version, added z-raise after print
|
||||
min_slic3r_version = 1.40.0-alpha
|
||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
||||
0.1.2 Wipe tower changes
|
||||
0.1.1 Minor print speed adjustments
|
||||
0.1.0 Initial
|
||||
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue