prusaslicer

PrusaSlicer/print/delta.ini

@@ -1,13 +1,15 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC
+# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2022-09-26 at 18:20:40 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
-bottom_solid_min_thickness = 1
+bottom_solid_min_thickness = 0
 bridge_acceleration = 0
 bridge_angle = 0
-bridge_flow_ratio = 0.92
-bridge_speed = 50
+bridge_flow_ratio = 0.95
+bridge_speed = 60
+brim_separation = 0
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,47 +17,60 @@ compatible_printers_condition =
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.4
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.4
+extrusion_width = 0
 fill_angle = 45
 fill_density = 30%
-fill_pattern = cubic
+fill_pattern = rectilinear
 first_layer_acceleration = 0
-first_layer_extrusion_width = 0.45
-first_layer_height = 0.25
-first_layer_speed = 30
-gap_fill_speed = 30
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 35
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
 infill_acceleration = 0
 infill_anchor = 600%
 infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
+infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 100
+infill_speed = 60
 inherits = 
 interface_shells = 0
 ironing = 0
-ironing_flowrate = 13%
+ironing_flowrate = 15%
 ironing_spacing = 0.1
 ironing_speed = 20
-ironing_type = top
-layer_height = 0.25
-max_print_speed = 100
-max_volumetric_speed = 0
+ironing_type = topmost
+layer_height = 0.4
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 16
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 10
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -63,57 +78,75 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.4
+perimeter_extrusion_width = 0
+perimeter_generator = arachne
 perimeter_speed = 60
 perimeters = 4
 post_process = 
 print_settings_id = delta
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_position = aligned
+seam_position = rear
 single_extruder_multi_material_priming = 1
-skirt_distance = 4
+skirt_distance = 7
 skirt_height = 1
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 50%
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
 support_material_buildplate_only = 0
+support_material_closing_radius = 2
 support_material_contact_distance = 0.25
 support_material_enforce_layers = 0
 support_material_extruder = 1
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear-grid
-support_material_spacing = 2
-support_material_speed = 80
+support_material_spacing = 2.5
+support_material_speed = 70
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 30
+support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
+thick_bridges = 1
 thin_walls = 1
-threads = 8
+threads = 4
 top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
+top_infill_extrusion_width = 0
 top_solid_infill_speed = 40
 top_solid_layers = 4
-top_solid_min_thickness = 1
+top_solid_min_thickness = 0
 travel_speed = 200
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60