prusaslicer

PrusaSlicer/PrusaSlicer.ini

@@ -1,23 +1,31 @@
-# generated by PrusaSlicer 2.3.3+linux-x64 on 2022-02-10 at 18:37:53 UTC
-auto_toolbar_size = 100
+# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-09-20 at 21:18:04 UTC
+allow_ip_resolve = 1
+auto_toolbar_size = 96
 autocenter = 0
 background_processing = 0
+clear_undo_redo_stack_on_new_project = 1
 collapsed_sidebar = 0
+color_mapinulation_panel = 0
 custom_toolbar_size = 100
 default_action_on_close_application = none
+default_action_on_new_project = none
 default_action_on_select_preset = none
 drop_project_action = 1
 export_sources_full_pathnames = 0
 last_output_path = /home/kostiank/Downloads/3d/g
-last_output_path_removable = /media/knki1108/A87B-A154/gcode
+last_output_path_removable = /run/media/zeus/A87B-A154/gcode
 no_controller = 1
 no_defaults = 1
+notify_release = none
+order_volumes = 1
 preset_update = 1
 remember_output_path = 1
 remember_output_path_removable = 1
+restore_win_position = 1
 reverse_mouse_wheel_zoom = 0
 seq_top_layer_only = 1
 show_drop_project_dialog = 1
+show_hints = 0
 show_incompatible_presets = 0
 show_splash_screen = 1
 single_instance = 0
@@ -28,12 +36,13 @@ use_custom_toolbar_size = 0
 use_free_camera = 0
 use_inches = 0
 use_perspective_camera = 0
-version = 2.3.3+linux-x64
+version = 2.4.1+linux-x64-GTK2
 version_check = 1
-version_online = 2.4.0
-version_online_seen = 2.4.0
+version_online = 2.4.2
+version_online_seen = 2.4.2
+version_system_info_sent = 2.4.1+linux-x64-GTK2
 view_mode = expert
-window_mainframe = 2556; 30; 2556; 1385; 0
+window_mainframe = 42; 24; 1324; 744; 1
 
 [filaments]
 Generic ABS = 1
@@ -50,16 +59,16 @@ Prusament PETG @MINI = 1
 Prusament PLA = 1
 
 [presets]
-filament = PETG-DasFilament_Saphirblau
+filament = PLA_Sunlu_Grasgruen
 physical_printer = 
 print = delta
-printer = sparky
+printer = delta
 sla_material = Prusa Orange Tough @0.025
 sla_print = 0.025 UltraDetail
 
 [recent]
 config_directory = /home/knki1108/Downloads/3d/calibration/models
-skein_directory = /home/kostiank/git/zeus/3d-stuff/openscad/own/auto-luefterschlitz-blende
+skein_directory = /home/zeus/git/zeus/3d-stuff/openscad/foreign/sc808
 
 [recent_projects]
 1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf

PrusaSlicer/cache/BIBO.idx

@@ -1,3 +1,6 @@
+min_slic3r_version = 2.4.1-beta3
+0.0.5 Correct Marlin Error accumulation for Ditto printer profiles.
+0.0.4 Correct Marlin Error accumulation
 min_slic3r_version = 2.3.0-beta2
 0.0.3 Removed obsolete host keys.
 min_slic3r_version = 2.2.0-alpha3

PrusaSlicer/cache/Creality.idx

@@ -1,3 +1,9 @@
+min_slic3r_version = 2.5.0-alpha0
+0.2.1 Added Ender 3 Neo and Ender 3 S1 Plus. Various updates.
+0.2.0 Added alternative nozzle support
+0.1.5 Added Ender-3 S1 Pro
+min_slic3r_version = 2.4.1
+0.1.4 Added Ender-3 Pro. Added M25 support for some printers.
 min_slic3r_version = 2.4.0-rc
 0.1.3 Ender-3 S1 improvements.
 0.1.2 Added alpha Ender 3 S1 profiles.

PrusaSlicer/cache/PrusaResearch.idx

@@ -1,4 +1,13 @@
+min_slic3r_version = 2.5.0-alpha0
+1.5.2 Added SLA material profiles.
+1.5.1 Renamed filament type "NYLON" to "PA". Updated Adura X profile. Updated PETG fan settings for Prusa MINI (removed fan ramp up).
+1.5.0 Updated arachne parameters. Added profiles for Jessie filaments.
+1.5.0-alpha1 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
+1.5.0-alpha0 Added parameters for Arachne perimeter generator. Changed default seam position. Updated output filename format.
 min_slic3r_version = 2.4.0-rc
+1.4.8 Added filament and SLA material profiles. Updated settings.
+1.4.7 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
+1.4.6 Added SLA materials. Updated filament profiles. 
 1.4.5 Added MMU2/S profiles for 0.25mm nozzle. Updated FW version. Enabled g-code thumbnails for MK3 family printers. Updated end g-code.
 1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles.
 1.4.3 Added new filament profiles and SLA materials.

PrusaSlicer/cache/PrusaResearch.ini

@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.4.5
+config_version = 1.5.2
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -30,7 +30,7 @@ technology = FFF
 family = MK3
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
 
 [printer_model:MK3]
 name = Original Prusa i3 MK3
@@ -39,7 +39,7 @@ technology = FFF
 family = MK3
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
 
 [printer_model:MK3SMMU2S]
 name = Original Prusa i3 MK3S && MK3S+ MMU2S
@@ -66,7 +66,7 @@ technology = FFF
 family = MK2.5
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2
 
 [printer_model:MK2.5]
 name = Original Prusa i3 MK2.5
@@ -75,7 +75,7 @@ technology = FFF
 family = MK2.5
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2
 
 [printer_model:MK2.5SMMU2S]
 name = Original Prusa i3 MK2.5S MMU2S
@@ -102,7 +102,7 @@ technology = FFF
 family = MK2
 bed_model = mk2_bed.stl
 bed_texture = mk2.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2
 
 [printer_model:MK2SMM]
 name = Original Prusa i3 MK2S MMU1
@@ -184,7 +184,7 @@ notes =
 overhangs = 1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
 perimeters = 2
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
@@ -193,7 +193,7 @@ print_settings_id =
 raft_layers = 0
 raft_first_layer_density = 90%
 resolution = 0
-seam_position = nearest
+seam_position = aligned
 single_extruder_multi_material_priming = 1
 skirts = 1
 skirt_distance = 2
@@ -243,6 +243,11 @@ bottom_solid_min_thickness = 0.5
 gcode_label_objects = 1
 infill_anchor = 2.5
 infill_anchor_max = 12
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.4
+wall_distribution_count = 1
+min_bead_width = 85%
 
 [print:*MK3*]
 fill_pattern = grid
@@ -284,11 +289,16 @@ support_material_interface_spacing = 0.15
 support_material_spacing = 1
 support_material_xy_spacing = 150%
 support_material_contact_distance = 0.1
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
 thick_bridges = 0
 bridge_flow_ratio = 1
 bridge_speed = 20
 wipe_tower_bridging = 6
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.25
+wall_distribution_count = 1
+min_bead_width = 85%
 
 [print:*0.25nozzleMK3*]
 inherits = *0.25nozzle*
@@ -330,13 +340,18 @@ support_material_extrusion_width = 0.55
 support_material_contact_distance = 0.15
 support_material_xy_spacing = 80%
 support_material_interface_spacing = 0.3
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
 infill_anchor_max = 15
 top_solid_min_thickness = 0.9
 bottom_solid_min_thickness = 0.6
 thick_bridges = 1
 bridge_flow_ratio = 0.95
 bridge_speed = 25
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
+wall_distribution_count = 1
+min_bead_width = 85%
 
 [print:*0.6nozzleMK3*]
 inherits = *0.6nozzle*
@@ -375,7 +390,7 @@ support_material_interface_speed = 100%
 support_material_spacing = 2
 support_material_xy_spacing = 80%
 support_material_threshold = 50
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
 fill_pattern = gyroid
 fill_density = 15%
 infill_anchor_max = 20
@@ -398,6 +413,11 @@ bottom_solid_min_thickness = 0.8
 single_extruder_multi_material_priming = 0
 thick_bridges = 1
 overhangs = 0
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.8
+wall_distribution_count = 1
+min_bead_width = 85%
 
 [print:*soluble_support*]
 overhangs = 1
@@ -894,6 +914,7 @@ top_solid_infill_speed = 40
 fill_pattern = gyroid
 fill_density = 15%
 perimeters = 3
+wipe_tower_bridging = 5
 
 [print:0.15mm QUALITY @MK3]
 inherits = *0.15mm*; *MK3*
@@ -1588,9 +1609,9 @@ filament_retract_lift = 0.2
 compatible_printers_condition = printer_model=="MK2SMM"
 
 [filament:*PETMINI*]
-# inherits = *PET*
+full_fan_speed_layer = 0
 filament_retract_length = nil
-filament_retract_speed = 40
+filament_retract_speed = 45
 filament_deretract_speed = 25
 filament_retract_lift = nil
 filament_retract_before_travel = 1
@@ -1599,9 +1620,9 @@ compatible_printers_condition = printer_model=="MINI"
 start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
 
 [filament:*PETMINI06*]
-# inherits = *PET*
+full_fan_speed_layer = 0
 filament_retract_length = nil
-filament_retract_speed = 40
+filament_retract_speed = 45
 filament_deretract_speed = 25
 filament_retract_lift = nil
 filament_retract_before_travel = 1
@@ -1610,7 +1631,6 @@ start_filament_gcode = "M900 K0.12 ; Filament gcode"
 filament_max_volumetric_speed = 13
 
 [filament:*ABSMINI*]
-# inherits = *ABS*
 bed_temperature = 100
 first_layer_bed_temperature = 100
 filament_retract_length = 2.7
@@ -1719,7 +1739,7 @@ filament_wipe = 0
 inherits = *PLA*
 filament_vendor = ColorFabb
 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
-extrusion_multiplier = 1.2
+extrusion_multiplier = 1.12
 filament_cost = 80.65
 filament_density = 3.9
 filament_spool_weight = 236
@@ -1730,7 +1750,7 @@ filament_max_volumetric_speed = 9
 inherits = *PLA*
 filament_vendor = ColorFabb
 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
-extrusion_multiplier = 1.2
+extrusion_multiplier = 1.15
 filament_cost = 80.65
 filament_density = 3.13
 filament_spool_weight = 236
@@ -1741,7 +1761,7 @@ filament_max_volumetric_speed = 8
 inherits = *PLA*
 filament_vendor = ColorFabb
 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
-extrusion_multiplier = 1.2
+extrusion_multiplier = 1.15
 filament_cost = 80.65
 filament_density = 3.9
 filament_spool_weight = 236
@@ -2025,6 +2045,28 @@ disable_fan_first_layers = 6
 compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
 
+[filament:Prusament PA11 Carbon Fiber]
+inherits = Prusament PC Blend Carbon Fiber
+filament_cost = 151.24 
+filament_density = 1.11
+filament_type = PA
+filament_max_volumetric_speed = 6.5
+extrusion_multiplier = 1.05
+first_layer_temperature = 275
+temperature = 285
+first_layer_bed_temperature = 90
+bed_temperature = 115
+fan_below_layer_time = 10
+compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
+
+[filament:Prusament PA11 Carbon Fiber @MK2]
+inherits = Prusament PA11 Carbon Fiber
+first_layer_bed_temperature = 90
+bed_temperature = 110
+disable_fan_first_layers = 6
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
+
 [filament:Fillamentum CPE]
 inherits = *PET*
 filament_vendor = Fillamentum
@@ -2344,10 +2386,10 @@ inherits = *PET*
 filament_vendor = addnorth
 filament_cost = 29.99
 filament_density = 1.27
-filament_type = NYLON
+filament_type = PA
 extrusion_multiplier = 0.98
-bed_temperature = 60
-first_layer_bed_temperature = 60
+bed_temperature = 115
+first_layer_bed_temperature = 105
 first_layer_temperature = 265
 temperature = 270
 fan_always_on = 0
@@ -2364,7 +2406,7 @@ filament_retract_lift = 0.4
 filament_max_volumetric_speed = 4
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
 filament_spool_weight = 0
-compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
 [filament:addnorth Adura X @MINI]
 inherits = addnorth Adura X
@@ -2372,14 +2414,24 @@ filament_retract_length = nil
 filament_retract_lift = nil
 filament_retract_speed = 40
 filament_deretract_speed = 25
+bed_temperature = 60
+first_layer_bed_temperature = 60
 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
 
 [filament:addnorth Adura X @MMU1]
 inherits = addnorth Adura X
 filament_retract_length = nil
 filament_retract_lift = nil
+bed_temperature = 60
+first_layer_bed_temperature = 60
 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"
 
+[filament:addnorth Adura X @MK2]
+inherits = addnorth Adura X
+bed_temperature = 110
+first_layer_bed_temperature = 105
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
+
 [filament:addnorth E-PLA]
 inherits = *PLA*
 filament_vendor = addnorth
@@ -2652,6 +2704,75 @@ filament_cost = 25.4
 filament_density = 1.24
 compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
+[filament:3D-Fuel Standard PLA]
+inherits = *PLA*
+filament_vendor = 3D-Fuel
+filament_cost = 22.14
+filament_density = 1.24
+filament_max_volumetric_speed = 10
+first_layer_temperature = 210
+temperature = 200
+
+[filament:3D-Fuel EasiPrint PLA]
+inherits = 3D-Fuel Standard PLA
+filament_cost = 30.44
+
+[filament:3D-Fuel Pro PLA]
+inherits = *PLA*
+filament_vendor = 3D-Fuel
+filament_cost = 26.57
+filament_density = 1.22
+filament_max_volumetric_speed = 12
+first_layer_temperature = 220
+temperature = 215
+filament_retract_lift = 0
+
+[filament:3D-Fuel Buzzed]
+inherits = 3D-Fuel Standard PLA
+filament_cost = 44.27
+filament_retract_lift = 0
+first_layer_temperature = 210
+temperature = 195
+filament_max_volumetric_speed = 8
+
+[filament:3D-Fuel Wound up]
+inherits = 3D-Fuel Buzzed
+filament_cost = 44.27
+filament_retract_lift = nil
+first_layer_temperature = 215
+temperature = 210
+filament_max_volumetric_speed = 8
+
+[filament:3D-Fuel Workday ABS]
+inherits = *ABSC*
+filament_vendor = 3D-Fuel
+filament_cost = 23.25
+filament_density = 1.04
+
+[filament:3D-Fuel Workday ABS @MINI]
+inherits = 3D-Fuel Workday ABS; *ABSMINI*
+
+[filament:Jessie PLA]
+inherits = *PLA*
+filament_vendor = Printed Solid
+filament_cost = 21
+filament_density = 1.24
+filament_max_volumetric_speed = 12
+
+[filament:Jessie PETG]
+inherits = *PET*
+filament_vendor = Printed Solid
+filament_cost = 22
+filament_density = 1.27
+first_layer_temperature = 240
+first_layer_bed_temperature = 85
+temperature = 245
+bed_temperature = 90
+filament_max_volumetric_speed = 7
+
+[filament:Jessie PETG @MINI]
+inherits = Jessie PETG; *PETMINI*
+
 [filament:Devil Design PLA]
 inherits = *PLA*
 filament_vendor = Devil Design
@@ -2909,7 +3030,7 @@ bed_temperature = 115
 fan_always_on = 0
 cooling = 0
 bridge_fan_speed = 25
-filament_type = NYLON
+filament_type = PA
 filament_max_volumetric_speed = 8
 compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
@@ -4053,7 +4174,7 @@ filament_cost = 27.65
 
 [filament:Fiberlogy Nylon PA12]
 inherits = Fiberlogy ASA
-filament_type = NYLON
+filament_type = PA
 filament_density = 1.01
 filament_cost = 48
 first_layer_bed_temperature = 105
@@ -4286,7 +4407,7 @@ inherits = *common*
 filament_vendor = Taulman
 filament_cost = 40
 filament_density = 1.13
-bed_temperature = 90
+bed_temperature = 110
 bridge_fan_speed = 40
 cooling = 0
 disable_fan_first_layers = 3
@@ -4295,13 +4416,22 @@ fan_below_layer_time = 20
 filament_colour = #DEE0E6
 filament_max_volumetric_speed = 7
 filament_soluble = 0
-filament_type = NYLON
-first_layer_bed_temperature = 60
-first_layer_temperature = 240
+filament_type = PA
+first_layer_bed_temperature = 90
+first_layer_temperature = 260
+temperature = 260
 max_fan_speed = 0
 min_fan_speed = 0
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
+compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Taulman Bridge @MINI]
+inherits = Taulman Bridge
+bed_temperature = 90
+first_layer_bed_temperature = 60
+first_layer_temperature = 240
 temperature = 250
+compatible_printers_condition = printer_model=="MINI"
 
 [filament:Fillamentum Nylon FX256]
 inherits = *common*
@@ -4320,7 +4450,7 @@ slowdown_below_layer_time = 20
 filament_colour = #DEE0E6
 filament_max_volumetric_speed = 6
 filament_soluble = 0
-filament_type = NYLON
+filament_type = PA
 first_layer_bed_temperature = 90
 first_layer_temperature = 250
 max_fan_speed = 0
@@ -4333,10 +4463,10 @@ inherits = *common*
 filament_vendor = Fiberthree
 filament_cost = 200.84
 filament_density = 1.2
-bed_temperature = 70
-first_layer_bed_temperature = 75
-first_layer_temperature = 270
-temperature = 270
+bed_temperature = 90
+first_layer_bed_temperature = 90
+first_layer_temperature = 285
+temperature = 285
 bridge_fan_speed = 30
 cooling = 1
 disable_fan_first_layers = 3
@@ -4347,7 +4477,7 @@ slowdown_below_layer_time = 10
 filament_colour = #DEE0E6
 filament_max_volumetric_speed = 5
 filament_soluble = 0
-filament_type = NYLON
+filament_type = PA
 max_fan_speed = 20
 min_fan_speed = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
@@ -4363,10 +4493,10 @@ inherits = *common*
 filament_vendor = Fiberthree
 filament_cost = 208.1
 filament_density = 1.25
-bed_temperature = 70
-first_layer_bed_temperature = 75
-first_layer_temperature = 275
-temperature = 275
+bed_temperature = 90
+first_layer_bed_temperature = 90
+first_layer_temperature = 285
+temperature = 285
 bridge_fan_speed = 30
 cooling = 1
 disable_fan_first_layers = 3
@@ -4377,7 +4507,7 @@ slowdown_below_layer_time = 10
 filament_colour = #DEE0E6
 filament_max_volumetric_speed = 5
 filament_soluble = 0
-filament_type = NYLON
+filament_type = PA
 max_fan_speed = 0
 min_fan_speed = 0
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
@@ -4663,6 +4793,10 @@ compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.
 [filament:Fiberthree F3 PA Pure Pro @MINI]
 inherits = Fiberthree F3 PA Pure Pro
 filament_max_volumetric_speed = 4
+first_layer_temperature = 280
+temperature = 280
+first_layer_bed_temperature = 75
+bed_temperature = 70
 filament_retract_length = nil
 filament_retract_speed = nil
 filament_retract_lift = nil
@@ -4672,6 +4806,10 @@ compatible_printers_condition = printer_model=="MINI"
 
 [filament:Fiberthree F3 PA-CF Pro @MINI]
 inherits = Fiberthree F3 PA-CF Pro
+first_layer_temperature = 280
+temperature = 280
+first_layer_bed_temperature = 75
+bed_temperature = 70
 filament_max_volumetric_speed = 4
 filament_retract_length = nil
 filament_retract_speed = nil
@@ -5051,6 +5189,16 @@ filament_max_volumetric_speed = 13
 filament_retract_lift = 0.25
 compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material
 
+[filament:Prusament PA11 Carbon Fiber @0.8 nozzle]
+inherits = Prusament PA11 Carbon Fiber
+filament_max_volumetric_speed = 11
+compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material
+
+[filament:Prusament PA11 Carbon Fiber @0.8 nozzle MK2]
+inherits = Prusament PA11 Carbon Fiber @MK2
+filament_max_volumetric_speed = 11
+compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
+
 [filament:Prusament PC Blend @0.8 nozzle MK2]
 inherits = Prusament PC Blend @MK2
 filament_max_volumetric_speed = 13
@@ -7319,6 +7467,79 @@ material_vendor = Ameralabs
 material_colour = #C0C0C0
 material_print_speed = slow
 
+[sla_material:BASF Ultracur3D RG 35 @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFEEE6
+
+[sla_material:BASF Ultracur3D ST 45 @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D ST 45 M @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D ST 80 @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 4.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFEEE6
+
+[sla_material:BASF Ultracur3D ST 80 White @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 4.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFFFFF
+
+[sla_material:BASF Ultracur3D ST 80 Black @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 4.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D EL 150 Black @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D FL 300 Black @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BlueCast X-One @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 6
+initial_exposure_time = 25
+material_type = Casting
+material_vendor = BlueCast
+material_colour = #C0C0C0
+material_print_speed = slow
+
 [sla_material:PrimaCreator Tough Light Grey @0.025 SL1S]
 inherits = *0.025_sl1s*
 exposure_time = 1.8
@@ -7418,6 +7639,38 @@ material_type = Tough
 material_vendor = Peopoly
 material_colour = #F8F8F8
 
+[sla_material:Liqcreate Clear Impact @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 7
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Liqcreate
+material_colour = #F8F8F8
+
+[sla_material:Liqcreate Strong X @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 7
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Liqcreate
+material_colour = #C0C0C0
+
+[sla_material:Resinworks 3D Green @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Resinworks 3D
+material_colour = #00B900
+
+[sla_material:3DJake Blue @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DJake
+material_colour = #007EFD
+
 ## 0.05 SL1S
 
 ## Prusa Polymers 0.05
@@ -7641,6 +7894,70 @@ material_vendor = Ameralabs
 material_colour = #C0C0C0
 material_print_speed = slow
 
+[sla_material:BASF Ultracur3D RG 35 @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFEEE6
+
+[sla_material:BASF Ultracur3D ST 45 @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D ST 45 M @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D ST 80 @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFEEE6
+
+[sla_material:BASF Ultracur3D ST 80 White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5.9
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFFFFF
+
+[sla_material:BASF Ultracur3D ST 80 Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5.9
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D EL 150 Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3.8
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D FL 300 Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4.8
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = BASF
+material_colour = #595959
+
 [sla_material:PrimaCreator Tough Light Grey @0.05 SL1S]
 inherits = *0.05_sl1s*
 exposure_time = 2.4
@@ -7820,6 +8137,15 @@ material_type = Tough
 material_vendor = BlueCast
 material_colour = #007EFD
 
+[sla_material:BlueCast X-One @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 7
+initial_exposure_time = 25
+material_type = Casting
+material_vendor = BlueCast
+material_colour = #C0C0C0
+material_print_speed = slow
+
 [sla_material:NextDent Model 2.0 Grey @0.05 SL1S]
 inherits = *0.05_sl1s*
 exposure_time = 4
@@ -8044,6 +8370,38 @@ material_type = Tough
 material_vendor = Photocentric
 material_colour = #808080
 
+[sla_material:Liqcreate Clear Impact @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 10
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Liqcreate
+material_colour = #F8F8F8
+
+[sla_material:Liqcreate Strong X @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 10
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Liqcreate
+material_colour = #C0C0C0
+
+[sla_material:Resinworks 3D Green @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 7
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Resinworks 3D
+material_colour = #00B900
+
+[sla_material:3DJake Blue @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DJake
+material_colour = #007EFD
+
 ## 0.1 SL1S
 
 ## Prusa Polymers 0.1
@@ -8267,6 +8625,79 @@ material_vendor = Ameralabs
 material_colour = #C0C0C0
 material_print_speed = slow
 
+[sla_material:BASF Ultracur3D RG 35 @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 10
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFEEE6
+
+[sla_material:BASF Ultracur3D ST 45 @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 7.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D ST 45 M @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 4.5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D ST 80 @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 9
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFEEE6
+
+[sla_material:BASF Ultracur3D ST 80 White @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 9
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #FFFFFF
+
+[sla_material:BASF Ultracur3D ST 80 Black @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 9
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D EL 150 Black @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 5
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BASF Ultracur3D FL 300 Black @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 6
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = BASF
+material_colour = #595959
+
+[sla_material:BlueCast X-One @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 8.5
+initial_exposure_time = 25
+material_type = Casting
+material_vendor = BlueCast
+material_colour = #C0C0C0
+material_print_speed = slow
+
 [sla_material:PrimaCreator Tough Light Grey @0.1 SL1S]
 inherits = *0.1_sl1s*
 exposure_time = 3
@@ -8348,6 +8779,38 @@ material_type = Tough
 material_vendor = Peopoly
 material_colour = #F8F8F8
 
+[sla_material:Liqcreate Clear Impact @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 20
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Liqcreate
+material_colour = #F8F8F8
+
+[sla_material:Liqcreate Strong X @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 20
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Liqcreate
+material_colour = #C0C0C0
+
+[sla_material:Resinworks 3D Green @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 13
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Resinworks 3D
+material_colour = #00B900
+
+[sla_material:3DJake Blue @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DJake
+material_colour = #007EFD
+
 [printer:*common*]
 printer_technology = FFF
 bed_shape = 0x0,250x0,250x210,0x210
@@ -8519,7 +8982,7 @@ inherits = Original Prusa i3 MK2S
 printer_model = MK2.5
 remaining_times = 1
 machine_max_jerk_e = 4.5
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
 
 [printer:Original Prusa i3 MK2.5 0.25 nozzle]
 inherits = Original Prusa i3 MK2S 0.25 nozzle
@@ -8533,7 +8996,8 @@ inherits = Original Prusa i3 MK2S 0.6 nozzle
 printer_model = MK2.5
 remaining_times = 1
 machine_max_jerk_e = 4.5
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
+deretract_speed = 25
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
 
 [printer:Original Prusa i3 MK2.5 0.8 nozzle]
 inherits = Original Prusa i3 MK2S 0.6 nozzle
@@ -8542,10 +9006,13 @@ nozzle_diameter = 0.8
 printer_variant = 0.8
 max_layer_height = 0.6
 min_layer_height = 0.2
-retract_length = 1
+retract_length = 0.7
+retract_speed = 35
+deretract_speed = 20
+retract_lift = 0.25
 remaining_times = 1
 machine_max_jerk_e = 4.5
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
@@ -8619,7 +9086,10 @@ max_layer_height = 0.6
 min_layer_height = 0.2
 nozzle_diameter = 0.8
 printer_variant = 0.8
-retract_length = 1
+retract_length = 0.7
+retract_speed = 35
+deretract_speed = 20
+retract_lift = 0.25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
@@ -8632,6 +9102,7 @@ max_layer_height = 0.35
 min_layer_height = 0.1
 nozzle_diameter = 0.6
 printer_variant = 0.6
+deretract_speed = 25
 default_print_profile = 0.20mm NORMAL @0.6 nozzle
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
@@ -8665,6 +9136,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
+deretract_speed = 25
 default_print_profile = 0.20mm NORMAL @0.6 nozzle
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
@@ -8674,6 +9146,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
+deretract_speed = 25
 default_print_profile = 0.20mm NORMAL @0.6 nozzle
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
@@ -8747,7 +9220,7 @@ remaining_times = 1
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
 max_print_height = 210
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 printer_model = MK3
 default_print_profile = 0.15mm QUALITY @MK3
 thumbnails = 160x120
@@ -8769,7 +9242,8 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}
+deretract_speed = 25
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
@@ -8779,8 +9253,11 @@ nozzle_diameter = 0.8
 max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
-retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95
+retract_length = 0.7
+retract_speed = 35
+deretract_speed = 20
+retract_lift = 0.25
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S95
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
@@ -8862,6 +9339,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
+deretract_speed = 25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
@@ -8873,7 +9351,10 @@ nozzle_diameter = 0.8
 max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
-retract_length = 1
+retract_length = 0.7
+retract_speed = 35
+deretract_speed = 20
+retract_lift = 0.25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
@@ -8915,6 +9396,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
+deretract_speed = 25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
@@ -8926,7 +9408,10 @@ nozzle_diameter = 0.8
 max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
-retract_length = 1
+retract_length = 0.7
+retract_speed = 35
+deretract_speed = 20
+retract_lift = 0.25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
@@ -8963,6 +9448,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
+deretract_speed = 25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
@@ -8973,6 +9459,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
+deretract_speed = 25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
@@ -9104,8 +9591,10 @@ max_layer_height = 0.55
 min_layer_height = 0.2
 default_print_profile = 0.40mm QUALITY @0.8 nozzle MINI
 default_filament_profile = Prusament PLA @0.8 nozzle
-retract_length = 3.5
+retract_length = 3
 retract_before_travel = 1.5
+retract_speed = 45
+deretract_speed = 20
 
 [printer:Original Prusa SL1]
 printer_technology = SLA

PrusaSlicer/filament/PLA_Sunlu_Grasgruen.ini

@@ -1,12 +1,12 @@
-# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-05-17 at 21:53:02 UTC
-bed_temperature = 55
+# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2022-09-26 at 18:17:08 UTC
+bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
 compatible_printers_condition = 
 compatible_prints = 
 compatible_prints_condition = 
 cooling = 1
-disable_fan_first_layers = 1
+disable_fan_first_layers = 2
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 0.98
 fan_always_on = 1
@@ -45,13 +45,13 @@ filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 filament_vendor = (Unknown)
 filament_wipe = nil
-first_layer_bed_temperature = 55
+first_layer_bed_temperature = 62
 first_layer_temperature = 210
-full_fan_speed_layer = 0
+full_fan_speed_layer = 3
 inherits = 
 max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 15
 start_filament_gcode = "; Filament gcode\n"
 temperature = 205

PrusaSlicer/print/delta.ini

@@ -1,13 +1,15 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC
+# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2022-09-26 at 18:20:40 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
-bottom_solid_min_thickness = 1
+bottom_solid_min_thickness = 0
 bridge_acceleration = 0
 bridge_angle = 0
-bridge_flow_ratio = 0.92
-bridge_speed = 50
+bridge_flow_ratio = 0.95
+bridge_speed = 60
+brim_separation = 0
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,47 +17,60 @@ compatible_printers_condition =
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.4
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.4
+extrusion_width = 0
 fill_angle = 45
 fill_density = 30%
-fill_pattern = cubic
+fill_pattern = rectilinear
 first_layer_acceleration = 0
-first_layer_extrusion_width = 0.45
-first_layer_height = 0.25
-first_layer_speed = 30
-gap_fill_speed = 30
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 35
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
 infill_acceleration = 0
 infill_anchor = 600%
 infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
+infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 100
+infill_speed = 60
 inherits = 
 interface_shells = 0
 ironing = 0
-ironing_flowrate = 13%
+ironing_flowrate = 15%
 ironing_spacing = 0.1
 ironing_speed = 20
-ironing_type = top
-layer_height = 0.25
-max_print_speed = 100
-max_volumetric_speed = 0
+ironing_type = topmost
+layer_height = 0.4
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 16
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 10
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -63,57 +78,75 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.4
+perimeter_extrusion_width = 0
+perimeter_generator = arachne
 perimeter_speed = 60
 perimeters = 4
 post_process = 
 print_settings_id = delta
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_position = aligned
+seam_position = rear
 single_extruder_multi_material_priming = 1
-skirt_distance = 4
+skirt_distance = 7
 skirt_height = 1
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 50%
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
 support_material_buildplate_only = 0
+support_material_closing_radius = 2
 support_material_contact_distance = 0.25
 support_material_enforce_layers = 0
 support_material_extruder = 1
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear-grid
-support_material_spacing = 2
-support_material_speed = 80
+support_material_spacing = 2.5
+support_material_speed = 70
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 30
+support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
+thick_bridges = 1
 thin_walls = 1
-threads = 8
+threads = 4
 top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
+top_infill_extrusion_width = 0
 top_solid_infill_speed = 40
 top_solid_layers = 4
-top_solid_min_thickness = 1
+top_solid_min_thickness = 0
 travel_speed = 200
+travel_speed_z = 0
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/printer/delta.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-31 at 16:56:56 UTC
+# generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2022-09-26 at 18:16:41 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
@@ -10,11 +10,11 @@ cooling_tube_retraction = 91.5
 default_filament_profile = ""
 default_print_profile = 
 deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S60; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
+end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
 extra_loading_move = -2
 extruder_colour = #019B9B
 extruder_offset = 0x0
-gcode_flavor = marlin
+gcode_flavor = marlin2
 high_current_on_filament_swap = 0
 host_type = octoprint
 inherits = 
@@ -23,6 +23,7 @@ machine_limits_usage = emit_to_gcode
 machine_max_acceleration_e = 10000,5000
 machine_max_acceleration_extruding = 1500,1250
 machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_travel = 1500,1250
 machine_max_acceleration_x = 9000,9000
 machine_max_acceleration_y = 9000,9000
 machine_max_acceleration_z = 9000,9000
@@ -37,9 +38,9 @@ machine_max_jerk_z = 9,9
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
 max_layer_height = 0
-max_print_height = 196
+max_print_height = 190
 min_layer_height = 0.1
-nozzle_diameter = 0.4
+nozzle_diameter = 0.6
 parking_pos_retraction = 92
 pause_print_gcode = M601
 print_host = 
@@ -62,12 +63,13 @@ retract_lift_above = 0
 retract_lift_below = 150
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 35
+retract_speed = 37.5
 silent_mode = 1
 single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
+start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z25 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n;{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 60}M900 K0.1; reduced LINEAR_ADVANCE because of medium speeds\n;{else}M900 K0.2; LINEAR_ADVANCE high quality preset\n; qualitywise ideal K would be somewhere around 0.38, but this slows the printer down at a unacceptable rate\nM900 K0  ;disabled linear advance alltogether, because it really hurts the printer and makes very screecy noises\n;{endif}
 template_custom_gcode = 
 thumbnails = 
+thumbnails_format = PNG
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0

PrusaSlicer/vendor/PrusaResearch.idx

@@ -1,4 +1,14 @@
+min_slic3r_version = 2.5.0-alpha0
+1.5.1 Renamed filament type "NYLON" to "PA". Updated Adura X profile. Updated PETG fan settings for Prusa MINI (removed fan ramp up).
+1.5.0 Updated arachne parameters. Added profiles for Jessie filaments.
+1.5.0-alpha1 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
+1.5.0-alpha0 Added parameters for Arachne perimeter generator. Changed default seam position. Updated output filename format.
 min_slic3r_version = 2.4.0-rc
+1.4.7 Added filament profile for Prusament PA11 Carbon Fiber. Added profiles for multiple 3D-Fuel filaments.
+1.4.6 Added SLA materials. Updated filament profiles. 
+1.4.5 Added MMU2/S profiles for 0.25mm nozzle. Updated FW version. Enabled g-code thumbnails for MK3 family printers. Updated end g-code.
+1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles.
+1.4.3 Added new filament profiles and SLA materials.
 1.4.2 Added SLA material profiles.
 1.4.1 Updated firmware version.
 1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
@@ -22,6 +32,7 @@ min_slic3r_version = 2.4.0-alpha0
 1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
 1.3.0-alpha0 Disabled thick bridges, updated support settings.
 min_slic3r_version = 2.3.2-alpha0
+1.3.7 Updated firmware version.
 1.3.6 Updated firmware version.
 1.3.5 Added material profiles for Prusament Resins.
 1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
@@ -30,6 +41,7 @@ min_slic3r_version = 2.3.2-alpha0
 1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
 1.3.0 Added SL1S SPEED profiles.
 min_slic3r_version = 2.3.0-rc1
+1.2.12 Updated firmware version.
 1.2.11 Updated firmware version.
 1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
 1.2.9 Added material profiles for Prusament Resin.
@@ -50,6 +62,7 @@ min_slic3r_version = 2.3.0-alpha4
 1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
 1.2.0-alpha0 Added filament spool weights
 min_slic3r_version = 2.2.0-alpha3
+1.1.16 Updated firmware version.
 1.1.15 Updated firmware version.
 1.1.14 Updated firmware version.
 1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.