zeus/3d-stuff
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

snakemake_logo

Browse Source
This commit is contained in:
zeus
2021-03-08 16:39:26 +01:00
parent 43e73b7291
commit c3401f1680
7 changed files with 81636 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
deltazeus/marlin/Configuration.h
View File

@@ -493,10 +493,10 @@
// deltazeus /w e3dv6 // changed
#define DEFAULT_Kp 32.65
#define DEFAULT_Ki 2.89
#define DEFAULT_Kd 92.27
// deltazeus /w e3dv6 normalized values // changed
#define DEFAULT_Kp 33.00
#define DEFAULT_Ki 3.00
#define DEFAULT_Kd 95.00
// stoffel-hotend
//#define DEFAULT_Kp 21.80
@@ -673,7 +673,7 @@
#define DELTA_DIAGONAL_ROD 202.0 // (mm) changed
// Distance between bed and nozzle Z home position
#define DELTA_HEIGHT 196.35 // (mm) Get this value from G33 auto calibrate // changed
#define DELTA_HEIGHT 197.0 // (mm) Get this value from G33 auto calibrate // changed
#define DELTA_ENDSTOP_ADJ { -0.1, -0.20, 0.0 } // Get these values from G33 auto calibrate
@@ -989,7 +989,7 @@
/**
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
//#define BLTOUCH
/**
* Pressure sensor with a BLTouch-like interface
@@ -2324,12 +2324,12 @@
// @section extras
// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN
#define FAST_PWM_FAN //changed, needed for sunon fans
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE.
//#define FAN_SOFT_PWM
//#define FAN_SOFT_PWM //changed, needed fot sunon fans
// Incrementing this by 1 will double the software PWM frequency,
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.

4
deltazeus/marlin/Configuration_adv.h
View File

@@ -391,7 +391,7 @@
// When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100
#define FAN_KICKSTART_TIME 500
// Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1
@@ -1606,7 +1606,7 @@
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
#define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed
#define LIN_ADVANCE_K 0.38 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
#endif