diff --git a/PrusaSlicer/.gitignore b/PrusaSlicer/.gitignore new file mode 100644 index 0000000..b6ab55c --- /dev/null +++ b/PrusaSlicer/.gitignore @@ -0,0 +1,2 @@ +snapshots/* +cache/* diff --git a/PrusaSlicer/filament/PLA_Noulei-Silk Filaments.ini b/PrusaSlicer/filament/PLA_Noulei-Silk Filaments.ini index 9ae6fbd..c26a46f 100644 --- a/PrusaSlicer/filament/PLA_Noulei-Silk Filaments.ini +++ b/PrusaSlicer/filament/PLA_Noulei-Silk Filaments.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC +# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-05-15 at 12:12:32 UTC bed_temperature = 55 bridge_fan_speed = 100 compatible_printers = @@ -37,6 +37,7 @@ filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 +filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = PLA filament_unload_time = 0 @@ -45,11 +46,12 @@ filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 55 -first_layer_temperature = 192 +first_layer_temperature = 200 +full_fan_speed_layer = 0 inherits = max_fan_speed = 100 min_fan_speed = 40 min_print_speed = 10 slowdown_below_layer_time = 8 start_filament_gcode = "; Filament gcode\n" -temperature = 190 +temperature = 200 diff --git a/PrusaSlicer/filament/PLA_Sunlu_Grasgruen.ini b/PrusaSlicer/filament/PLA_Sunlu_Grasgruen.ini new file mode 100644 index 0000000..5b33f51 --- /dev/null +++ b/PrusaSlicer/filament/PLA_Sunlu_Grasgruen.ini @@ -0,0 +1,57 @@ +# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-05-17 at 21:53:02 UTC +bed_temperature = 55 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.98 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #10AC48 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 20 +filament_density = 1.18 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = (Unknown) +filament_wipe = nil +first_layer_bed_temperature = 55 +first_layer_temperature = 210 +full_fan_speed_layer = 0 +inherits = +max_fan_speed = 100 +min_fan_speed = 40 +min_print_speed = 10 +slowdown_below_layer_time = 8 +start_filament_gcode = "; Filament gcode\n" +temperature = 205 diff --git a/filaments.md b/filaments.md index 8ce7b5f..c22d006 100644 --- a/filaments.md +++ b/filaments.md @@ -2,12 +2,13 @@ | Make | Material | Color/Code | Dia | Price/Volume | Notes | 3dprintingdb | |--- |--- |--- |--- |--: |--- |--- | -| Noulei | PLA | Silk Black / #24 | 1.75mm | 26,99€/1kg | 190°C, better layer bond as other silk filaments from same vendor | N/A | -| Noulei | PLA | Silk Blue / #11 | 1.75mm | 26,99€/1kg | 190°C, Shiny tortoise/light blue | N/A | -| Noulei | PLA | Silk Silver Blue / #14| 1.75mm | 26,99€/1kg | 190°C, Shiny purple | N/A | +| Noulei | PLA | Silk Black / #24 | 1.75mm | 26,99€/1kg | 190-200°C, better layer bond as other silk filaments from same vendor, multiplier: 0.95 | N/A | +| Noulei | PLA | Silk Blue / #11 | 1.75mm | 26,99€/1kg | 190-200°C, Shiny tortoise/light blue | N/A | +| Noulei | PLA | Silk Silver Blue / #14| 1.75mm | 26,99€/1kg | 190-200°C, Shiny purple | N/A | | GEEETECH | PLA | Black / 700-001-0426 / Y2005 | 1.75mm | 24,99€/1kg | | N/A | | GEEETECH | PLA | Silk Silver | 1.75mm | 26,99€/1kg | | N/A | | TINMORRY | PETG | White | 1,75mm | 18,88€/1kg | 235°C/75°C, very strong layer bond | [link](https://3dprintingdb.com/filament/928/tinmorry-petg-white) | +| Sunlu | PLA | Grasgruen | 1,75mm | 18,49€/1kg | 210°C/205°C, slightly more dense than noulei (multiplier ~0.98) | DasFilament | PETG | Silber | 1,75mm | 22,37€/850g(refill) | 235°C/75°C, with sparkles | N/A | | DasFilament | PETG | Saphirblau | 1,75mm | 21,41€/800g | 225°C/75°C, needs less temp than others! | [link](https://3dprintingdb.com/filament/662/das-filament-petg-saphirblau) | | DasFilament | PETG | Rubinrot | 1,75mm | 18,88€/850g(refill) | TBD | [link](https://3dprintingdb.com/filament/663/das-filament-petg-rubinrot) |