diff --git a/PrusaSlicer/PrusaSlicer.ini b/PrusaSlicer/PrusaSlicer.ini index 6ba3d2d..edc055d 100644 --- a/PrusaSlicer/PrusaSlicer.ini +++ b/PrusaSlicer/PrusaSlicer.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-11-11 at 12:44:17 UTC +# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-16 at 10:37:16 UTC auto_toolbar_size = 100 autocenter = 0 background_processing = 0 @@ -28,12 +28,12 @@ use_custom_toolbar_size = 0 use_free_camera = 0 use_inches = 0 use_perspective_camera = 0 -version = 2.3.0+linux-x64 +version = 2.3.3+linux-x64 version_check = 1 -version_online = 2.3.0 -version_online_seen = 2.3.0 +version_online = 2.3.3 +version_online_seen = 2.3.3 view_mode = expert -window_mainframe = 2560; 30; 2556; 1385; 0 +window_mainframe = 0; 30; 2556; 1385; 0 [filaments] Generic ABS = 1 @@ -54,18 +54,28 @@ filament = PETG-DasFilament_Saphirblau physical_printer = print = delta printer = delta -sla_material = -sla_print = +sla_material = Prusa Orange Tough @0.025 +sla_print = 0.025 UltraDetail [recent] config_directory = /home/knki1108/Downloads/3d/calibration/models -skein_directory = /home/knki1108/smb4k/BACKUP.GLA.KOSTIANIX.DE/austausch/Wargaming/Miniaturen (sonstige)/eigene/parametric wargaming base +skein_directory = /home/knki1108/smb4k/BACKUP.GLA.KOSTIANIX.DE/austausch/Wargaming/One Page Rules - Age of Fantasy/Miniaturen/Mummified Undead/Guardian Statues/Large (46mm) [recent_projects] 1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf 2 = /home/knki1108/Downloads/3d/calibration/models/3DBenchy.3mf 3 = /home/kostiank/Bilder/anderes/print issues top surface/kossel_2020_shells_plain.3mf +[sla_materials] +Prusa Orange Tough @0.025 = 1 +Prusa Orange Tough @0.035 = 1 +Prusa Orange Tough @0.05 = 1 +Prusa Orange Tough @0.1 = 1 +Prusament Resin Tough Prusa Orange @0.025 = 1 +Prusament Resin Tough Prusa Orange @0.05 = 1 +Prusament Resin Tough Prusa Orange @0.1 = 1 + [vendor:PrusaResearch] model:MINI = 0.25;0.4;0.6 model:MK3S = 0.4 + diff --git a/PrusaSlicer/cache/Anycubic.idx b/PrusaSlicer/cache/Anycubic.idx index 062a0ec..cc3b55e 100644 --- a/PrusaSlicer/cache/Anycubic.idx +++ b/PrusaSlicer/cache/Anycubic.idx @@ -1,9 +1,14 @@ -min_slic3r_version = 2.3.0-beta2 -0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel. -0.0.5 Updated end g-code. -min_slic3r_version = 2.3.0-alpha2 -0.0.4 Fixed predator output filaname format, infill overlap. -0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator -0.0.2 Added Anycubic Predator -min_slic3r_version = 2.3.0-alpha0 -0.0.1 Initial Version +min_slic3r_version = 2.3.1-beta +0.0.10 Various updates for Anycubic Mega. Added filament profiles. +0.0.9 Updated bed textures +min_slic3r_version = 2.3.0-beta2 +0.0.8 Updated start and end g-code for Anycubic Mega. +0.0.7 Updated start g-code for Anycubic Mega. +0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel. +0.0.5 Updated end g-code. +min_slic3r_version = 2.3.0-alpha2 +0.0.4 Fixed predator output filename format, infill overlap, start gcode adjustments. +0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator +0.0.2 Added Anycubic Predator +min_slic3r_version = 2.3.0-alpha0 +0.0.1 Initial Version diff --git a/PrusaSlicer/cache/Creality.idx b/PrusaSlicer/cache/Creality.idx index a96a348..412be2c 100644 --- a/PrusaSlicer/cache/Creality.idx +++ b/PrusaSlicer/cache/Creality.idx @@ -1,4 +1,12 @@ +min_slic3r_version = 2.3.2-alpha0 +0.1.0 Added Ender-7, Sermoon D1, CR-10 SMART +min_slic3r_version = 2.3.1-beta +0.0.17 Updated start g-code. Added specific start g-code for straingauge printers. Improved output filename format. Added filament profile. +0.0.16 Updated CR6-SE start g-code. Added and updated filament profiles. +0.0.15 Added new printer models, filament profiles. Various improvements. min_slic3r_version = 2.3.0-rc2 +0.0.14 Optimized start g-code. Added filament profile. Various improvements. +0.0.13 Optimized start and end g-code. General improvements. 0.0.12 Added Ender-3V2 and filament profiles. min_slic3r_version = 2.3.0-beta2 0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus. diff --git a/PrusaSlicer/cache/PrusaResearch.ini b/PrusaSlicer/cache/PrusaResearch.ini index ba9456c..02971b6 100644 --- a/PrusaSlicer/cache/PrusaResearch.ini +++ b/PrusaSlicer/cache/PrusaResearch.ini @@ -5,7 +5,7 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 1.2.10 +config_version = 1.3.3 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% @@ -125,6 +125,15 @@ bed_model = sl1_bed.stl bed_texture = sl1.svg default_materials = Prusa Orange Tough @0.05; Prusament Resin Tough Prusa Orange @0.05 +[printer_model:SL1S] +name = Original Prusa SL1S SPEED +variants = default +technology = SLA +family = SL1 +bed_model = sl1s_bed.stl +bed_texture = sl1s.svg +default_materials = Prusa Orange Tough @0.05 SL1S; Prusament Resin Tough Prusa Orange @0.05 SL1S + # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. @@ -4834,6 +4843,14 @@ support_pillar_widening_factor = 0 supports_enable = 1 support_small_pillar_diameter_percent = 60% +[sla_print:*SL1S*] +inherits = *common* +support_head_front_diameter = 0.5 +support_head_penetration = 0.5 +support_pillar_diameter = 1 +output_filename_format = [input_filename_base].sl1s +compatible_printers_condition = printer_model=="SL1S" + # SL1 # [sla_print:0.025 UltraDetail] @@ -4856,6 +4873,23 @@ support_head_front_diameter = 0.5 support_head_penetration = 0.5 support_pillar_diameter = 1.3 +# SL1S # + +[sla_print:0.025 UltraDetail @SL1S] +inherits = *SL1S* +layer_height = 0.025 +support_head_width = 3 + +[sla_print:0.05 Normal @SL1S] +inherits = *SL1S* +layer_height = 0.05 + +[sla_print:0.1 Fast @SL1S] +inherits = *SL1S* +layer_height = 0.1 +support_head_front_diameter = 0.6 +support_head_penetration = 0.6 + ########### Materials [sla_material:*common*] @@ -4891,6 +4925,29 @@ exposure_time = 20 initial_exposure_time = 45 initial_layer_height = 0.1 +[sla_material:*0.025_sl1s*] +inherits = *common* +compatible_prints_condition = layer_height == 0.025 +compatible_printers_condition = printer_model=="SL1S" +exposure_time = 1.3 +initial_exposure_time = 25 +initial_layer_height = 0.025 + +[sla_material:*0.05_sl1s*] +inherits = *common* +compatible_printers_condition = printer_model=="SL1S" +exposure_time = 1.7 +initial_exposure_time = 25 + +[sla_material:*0.1_sl1s*] +inherits = *common* +compatible_prints_condition = layer_height == 0.1 +compatible_printers_condition = printer_model=="SL1S" +exposure_time = 2.6 +initial_exposure_time = 25 +initial_layer_height = 0.1 + + ########### Materials 0.025 [sla_material:3DM-ABS @0.025] @@ -5085,7 +5142,6 @@ material_type = Tough material_vendor = Prusa Polymers ## Prusa 0.025 - [sla_material:Prusa Orange Tough @0.025] inherits = *common 0.025* exposure_time = 6 @@ -6161,6 +6217,642 @@ initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa +## SL1S materials ## + +## 0.025 SL1S + +## Prusa Polymers 0.025 + +[sla_material:Prusament Resin Tough Prusa Orange @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +## Made for Prusa 0.025 + +[sla_material:Prusa Orange Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Cyan Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Magenta Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Blue Flexible @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 3 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:PrimaCreator Tough Light Grey @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough White @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Flex Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Water Washable Transparent @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:DruckWege Type D Dental Model @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.2 +initial_exposure_time = 15 +material_type = Dental +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard White @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.6 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:3DM-ABS Orange @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:Peopoly Deft White @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +[sla_material:Peopoly Neo Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +## 0.05 SL1S + +## Prusa Polymers 0.05 + +[sla_material:Prusament Resin Tough Prusa Orange @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +## Made for Prusa 0.05 + +[sla_material:Prusa Orange Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Cyan Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Magenta Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Blue Flexible @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 5 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 5 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 4 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:PrimaCreator Tough Light Grey @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough White @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Flex Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Water Washable Transparent @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:DruckWege Type D Dental Model @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 1.4 +initial_exposure_time = 15 +material_type = Dental +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard White @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:3DM-ABS Orange @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:Peopoly Deft White @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +[sla_material:Peopoly Neo Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +## 0.1 SL1S + +## Prusa Polymers 0.1 + +[sla_material:Prusament Resin Tough Prusa Orange @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +## Made for Prusa 0.1 + +[sla_material:Prusa Orange Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Cyan Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Magenta Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Blue Flexible @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 10 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 10 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 8 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:PrimaCreator Tough Light Grey @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough White @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Flex Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Water Washable Transparent @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:DruckWege Type D Dental Model @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 15 +material_type = Dental +material_vendor = DruckWege + +[sla_material:3DM-ABS Orange @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:Peopoly Deft White @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +[sla_material:Peopoly Neo Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + [printer:*common*] printer_technology = FFF bed_shape = 0x0,250x0,250x210,0x210 @@ -6223,6 +6915,7 @@ printer_model = MK2S printer_variant = 0.4 default_print_profile = 0.15mm OPTIMAL default_filament_profile = Prusament PLA +color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change [printer:*multimaterial*] inherits = *common* @@ -6279,6 +6972,7 @@ variable_layer_height = 1 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK2S 0.6 nozzle] inherits = *common* @@ -6287,6 +6981,7 @@ min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change # XXXXXXXXXXXXXXXXXXX # XXX--- MK2MM ---XXX @@ -6357,6 +7052,7 @@ machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5 MMU2 Single] inherits = Original Prusa i3 MK2.5; *mm2* @@ -6494,6 +7190,7 @@ retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single @@ -6503,6 +7200,7 @@ min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single @@ -6514,6 +7212,7 @@ printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5S MMU2S] inherits = Original Prusa i3 MK2.5; *mm2s* @@ -6556,6 +7255,7 @@ max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK2.5 MMU2 @@ -6564,6 +7264,7 @@ max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. @@ -6628,6 +7329,7 @@ printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK3 0.6 nozzle] inherits = Original Prusa i3 MK3 @@ -6637,6 +7339,7 @@ min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3 0.8 nozzle] inherits = Original Prusa i3 MK3 @@ -6648,6 +7351,7 @@ retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+] inherits = Original Prusa i3 MK3 @@ -6710,6 +7414,7 @@ min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle @@ -6722,6 +7427,7 @@ retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single @@ -6733,6 +7439,7 @@ printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2] inherits = *mm2* @@ -6763,6 +7470,7 @@ min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle @@ -6775,6 +7483,7 @@ retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single @@ -6787,6 +7496,7 @@ printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+ MMU2S] inherits = *mm2s* @@ -6808,6 +7518,7 @@ min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 @@ -6817,6 +7528,7 @@ min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## 0.8mm nozzle MMU2/S printer profiles @@ -6887,9 +7599,10 @@ retract_layer_change = 1 silent_mode = 0 remaining_times = 1 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow -end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors +end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n extruder_colour = +color_change_gcode = M600 [printer:Original Prusa MINI & MINI+ 0.25 nozzle] inherits = Original Prusa MINI & MINI+ @@ -6912,7 +7625,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI -retract_length = 3.5 +retract_length = 3.2 retract_before_travel = 1.5 [printer:Original Prusa MINI & MINI+ 0.8 nozzle] @@ -6947,6 +7660,36 @@ max_initial_exposure_time = 300 printer_correction = 1,1,1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n +[printer:Original Prusa SL1S SPEED] +printer_technology = SLA +printer_model = SL1S +printer_variant = default +default_sla_material_profile = Prusa Orange Tough @0.05 SL1S +default_sla_print_profile = 0.05 Normal @SL1S +thumbnails = 400x400,800x480 +bed_shape = 0.5x0.5,127.5x0.5,127.5x80.5,0.5x80.5 +display_height = 81 +display_mirror_x = 1 +display_mirror_y = 0 +display_orientation = portrait +display_pixels_x = 2560 +display_pixels_y = 1620 +display_width = 128 +elefant_foot_compensation = 0.2 +elefant_foot_min_width = 0.2 +fast_tilt_time = 2.5 +slow_tilt_time = 5 +gamma_correction = 1 +max_print_height = 150 +min_exposure_time = 1 +max_exposure_time = 120 +min_initial_exposure_time = 1 +max_initial_exposure_time = 300 +printer_correction = 1,1,1 +relative_correction = 1,1 +area_fill = 45 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1S\n + # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer. [obsolete_presets] print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2" diff --git a/PrusaSlicer/cache/TriLAB.idx b/PrusaSlicer/cache/TriLAB.idx index 4a097ed..5809ea3 100644 --- a/PrusaSlicer/cache/TriLAB.idx +++ b/PrusaSlicer/cache/TriLAB.idx @@ -1,8 +1,11 @@ +min_slic3r_version = 2.3.2-alpha0 +0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements min_slic3r_version = 2.3.0-alpha3 +0.0.7 Added PLA, PETG profiles for 0.25 nozzle, fixed supports on 0.8 nozzle profile, fixed max volumetric speed, disabled elefant foot compensation 0.0.6 Added material TPU 93A (SMARTFIL) 0.0.5 Removed obsolete host keys. 0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials 0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support min_slic3r_version = 2.3.0-alpha0 0.0.2 Added 0.15mm print profile -0.0.1 Initial TriLAB bundle +0.0.1 Initial TriLAB bundle \ No newline at end of file diff --git a/PrusaSlicer/printer/Elegoo Mars 2 Pro.ini b/PrusaSlicer/printer/Elegoo Mars 2 Pro.ini new file mode 100644 index 0000000..ec01b07 --- /dev/null +++ b/PrusaSlicer/printer/Elegoo Mars 2 Pro.ini @@ -0,0 +1,38 @@ +# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-12 at 23:01:23 UTC +absolute_correction = 0 +area_fill = 50 +bed_custom_model = +bed_custom_texture = +bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02 +default_sla_material_profile = Prusa Orange Tough @0.05 +default_sla_print_profile = 0.05 Normal +display_height = 68.04 +display_mirror_x = 1 +display_mirror_y = 0 +display_orientation = portrait +display_pixels_x = 2560 +display_pixels_y = 1440 +display_width = 120.96 +elefant_foot_compensation = 0.2 +elefant_foot_min_width = 0.2 +fast_tilt_time = 5 +gamma_correction = 1 +host_type = octoprint +inherits = Original Prusa SL1 +max_exposure_time = 120 +max_initial_exposure_time = 300 +max_print_height = 150 +min_exposure_time = 1 +min_initial_exposure_time = 1 +print_host = +printer_model = SL1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n +printer_settings_id = +printer_technology = SLA +printer_variant = default +printer_vendor = +printhost_apikey = +printhost_cafile = +relative_correction = 1,1 +slow_tilt_time = 8 +thumbnails = 400x400,800x480 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-DasFilament_Saphirblau.ini b/PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-DasFilament_Saphirblau.ini new file mode 100644 index 0000000..5e6df72 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-DasFilament_Saphirblau.ini @@ -0,0 +1,57 @@ +# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-27 at 05:24:47 UTC +bed_temperature = 75 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 2 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.99 +fan_always_on = 1 +fan_below_layer_time = 30 +filament_colour = #1730DD +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 25 +filament_density = 1.18 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = PETG-DasFilament_Saphirblau +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = PET +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = (Unknown) +filament_wipe = nil +first_layer_bed_temperature = 70 +first_layer_temperature = 235 +full_fan_speed_layer = 3 +inherits = +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" +temperature = 240 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-Tinmorry White.ini b/PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-Tinmorry White.ini new file mode 100644 index 0000000..ca31e62 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-Tinmorry White.ini @@ -0,0 +1,55 @@ +# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC +bed_temperature = 70 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.97 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #000000 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 20 +filament_density = 1.18 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PET +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = (Unknown) +filament_wipe = nil +first_layer_bed_temperature = 72 +first_layer_temperature = 235 +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 8 +start_filament_gcode = "; Filament gcode\n" +temperature = 230 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Geetech_Black.ini b/PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Geetech_Black.ini new file mode 100644 index 0000000..9b76182 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Geetech_Black.ini @@ -0,0 +1,57 @@ +# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 14:26:28 UTC +bed_temperature = 65 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.95 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #0EFB7C +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 20 +filament_density = 1.18 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = (Unknown) +filament_wipe = nil +first_layer_bed_temperature = 65 +first_layer_temperature = 200 +full_fan_speed_layer = 0 +inherits = +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 8 +start_filament_gcode = "; Filament gcode\n" +temperature = 195 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Noulei-Silk Filaments.ini b/PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Noulei-Silk Filaments.ini new file mode 100644 index 0000000..9ae6fbd --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Noulei-Silk Filaments.ini @@ -0,0 +1,55 @@ +# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC +bed_temperature = 55 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.95 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #000000 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 20 +filament_density = 1.18 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = (Unknown) +filament_wipe = nil +first_layer_bed_temperature = 55 +first_layer_temperature = 192 +inherits = +max_fan_speed = 100 +min_fan_speed = 40 +min_print_speed = 10 +slowdown_below_layer_time = 8 +start_filament_gcode = "; Filament gcode\n" +temperature = 190 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/filament/sparky.ini b/PrusaSlicer/snapshots/20211112T225913Z/filament/sparky.ini new file mode 100644 index 0000000..5f5a346 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/filament/sparky.ini @@ -0,0 +1,57 @@ +# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-20 at 21:08:45 UTC +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #29B2B2 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 0 +filament_density = 0 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = (Unknown) +filament_wipe = nil +first_layer_bed_temperature = 65 +first_layer_temperature = 200 +full_fan_speed_layer = 0 +inherits = +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 200 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/print/delta.ini b/PrusaSlicer/snapshots/20211112T225913Z/print/delta.ini new file mode 100644 index 0000000..11b0449 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/print/delta.ini @@ -0,0 +1,122 @@ +# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 4 +bottom_solid_min_thickness = 1 +bridge_acceleration = 0 +bridge_angle = 0 +bridge_flow_ratio = 0.92 +bridge_speed = 50 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +draft_shield = 0 +elefant_foot_compensation = 0.1 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 0.4 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.4 +fill_angle = 45 +fill_density = 30% +fill_pattern = cubic +first_layer_acceleration = 0 +first_layer_extrusion_width = 0.45 +first_layer_height = 0.25 +first_layer_speed = 30 +gap_fill_speed = 30 +gcode_comments = 0 +gcode_label_objects = 0 +infill_acceleration = 0 +infill_anchor = 600% +infill_anchor_max = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 100 +inherits = +interface_shells = 0 +ironing = 0 +ironing_flowrate = 13% +ironing_spacing = 0.1 +ironing_speed = 20 +ironing_type = top +layer_height = 0.25 +max_print_speed = 100 +max_volumetric_speed = 0 +min_skirt_length = 10 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.4 +perimeter_speed = 60 +perimeters = 4 +post_process = +print_settings_id = delta +raft_layers = 0 +resolution = 0 +seam_position = aligned +single_extruder_multi_material_priming = 1 +skirt_distance = 4 +skirt_height = 1 +skirts = 1 +slice_closing_radius = 0.049 +small_perimeter_speed = 50% +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 100 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.25 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = rectilinear-grid +support_material_spacing = 2 +support_material_speed = 80 +support_material_synchronize_layers = 0 +support_material_threshold = 30 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 1 +threads = 8 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +top_solid_layers = 4 +top_solid_min_thickness = 1 +travel_speed = 200 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/print/delta_speed-draft_100mm.ini b/PrusaSlicer/snapshots/20211112T225913Z/print/delta_speed-draft_100mm.ini new file mode 100644 index 0000000..8d63191 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/print/delta_speed-draft_100mm.ini @@ -0,0 +1,114 @@ +# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC +avoid_crossing_perimeters = 0 +bottom_fill_pattern = rectilinear +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0 +bridge_acceleration = 0 +bridge_angle = 0 +bridge_flow_ratio = 0.91 +bridge_speed = 100 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +draft_shield = 0 +elefant_foot_compensation = 0.1 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 0.42 +external_perimeter_speed = 100 +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.44 +fill_angle = 45 +fill_density = 15% +fill_pattern = cubic +first_layer_acceleration = 0 +first_layer_extrusion_width = 0.44 +first_layer_height = 0.3 +first_layer_speed = 40 +gap_fill_speed = 100 +gcode_comments = 0 +gcode_label_objects = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.44 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 30% +infill_speed = 100 +inherits = +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 200 +max_volumetric_speed = 0 +min_skirt_length = 10 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.44 +perimeter_speed = 100 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = aligned +single_extruder_multi_material_priming = 1 +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +slice_closing_radius = 0.049 +small_perimeter_speed = 100 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.44 +solid_infill_speed = 100 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_buildplate_only = 1 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1.5 +support_material_speed = 100 +support_material_synchronize_layers = 0 +support_material_threshold = 20 +support_material_with_sheath = 1 +support_material_xy_spacing = 50% +thin_walls = 1 +threads = 8 +top_fill_pattern = rectilinear +top_infill_extrusion_width = 0.44 +top_solid_infill_speed = 100 +top_solid_layers = 3 +top_solid_min_thickness = 0 +travel_speed = 250 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/print/sparky.ini b/PrusaSlicer/snapshots/20211112T225913Z/print/sparky.ini new file mode 100644 index 0000000..2b19371 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/print/sparky.ini @@ -0,0 +1,122 @@ +# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 10:26:16 UTC +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 3 +bottom_solid_min_thickness = 0 +bridge_acceleration = 0 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +draft_shield = 0 +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = stars +first_layer_acceleration = 0 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.3 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +gcode_label_objects = 0 +infill_acceleration = 0 +infill_anchor = 600% +infill_anchor_max = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 80 +inherits = +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.3 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 10 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = aligned +single_extruder_multi_material_priming = 1 +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +slice_closing_radius = 0.049 +small_perimeter_speed = 30 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_synchronize_layers = 0 +support_material_threshold = 0 +support_material_with_sheath = 1 +support_material_xy_spacing = 50% +thin_walls = 1 +threads = 8 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 20 +top_solid_layers = 3 +top_solid_min_thickness = 0 +travel_speed = 130 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/printer/delta.ini b/PrusaSlicer/snapshots/20211112T225913Z/printer/delta.ini new file mode 100644 index 0000000..e1a9817 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/printer/delta.ini @@ -0,0 +1,77 @@ +# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-31 at 16:56:56 UTC +bed_custom_model = +bed_custom_texture = +bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14 +before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n +between_objects_gcode = +color_change_gcode = M600 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "" +default_print_profile = +deretract_speed = 0 +end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S60; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off +extra_loading_move = -2 +extruder_colour = #019B9B +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = +layer_gcode = +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 10000,5000 +machine_max_acceleration_extruding = 1500,1250 +machine_max_acceleration_retracting = 1500,1250 +machine_max_acceleration_x = 9000,9000 +machine_max_acceleration_y = 9000,9000 +machine_max_acceleration_z = 9000,9000 +machine_max_feedrate_e = 250,250 +machine_max_feedrate_x = 1500,1500 +machine_max_feedrate_y = 1500,1500 +machine_max_feedrate_z = 1500,1500 +machine_max_jerk_e = 2.5,2.5 +machine_max_jerk_x = 9,9 +machine_max_jerk_y = 9,9 +machine_max_jerk_z = 9,9 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0 +max_print_height = 196 +min_layer_height = 0.1 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = +printer_notes = +printer_settings_id = +printer_technology = FFF +printer_variant = +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 1 +retract_before_travel = 2 +retract_before_wipe = 10% +retract_layer_change = 0 +retract_length = 2 +retract_length_toolchange = 10 +retract_lift = 0.15 +retract_lift_above = 0 +retract_lift_below = 150 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif} +template_custom_gcode = +thumbnails = +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 0 +z_offset = 0 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/printer/sparky.ini b/PrusaSlicer/snapshots/20211112T225913Z/printer/sparky.ini new file mode 100644 index 0000000..4713d40 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/printer/sparky.ini @@ -0,0 +1,77 @@ +# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-22 at 23:05:45 UTC +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,177x0,177x175,0x175 +before_layer_gcode = +between_objects_gcode = +color_change_gcode = M600 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = +default_print_profile = +deretract_speed = 0 +end_gcode = M104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nM84 ; disable motors\nM106 S255 ; Cooldown Hotend\nG4 S30 ; wait 30secs\nM107 ; turn off Fan \n +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +host_type = octoprint +inherits = +layer_gcode = +machine_limits_usage = emit_to_gcode +machine_max_acceleration_e = 10000,5000 +machine_max_acceleration_extruding = 1500,1250 +machine_max_acceleration_retracting = 1500,1250 +machine_max_acceleration_x = 9000,1000 +machine_max_acceleration_y = 9000,1000 +machine_max_acceleration_z = 500,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 500,200 +machine_max_feedrate_y = 500,200 +machine_max_feedrate_z = 5,5 +machine_max_jerk_e = 2.5,2.5 +machine_max_jerk_x = 10,10 +machine_max_jerk_y = 10,10 +machine_max_jerk_z = 0.2,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_layer_height = 0 +max_print_height = 145 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +pause_print_gcode = M601 +print_host = +printer_model = +printer_notes = +printer_settings_id = +printer_technology = FFF +printer_variant = +printer_vendor = +printhost_apikey = +printhost_cafile = +remaining_times = 0 +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 2 +retract_length_toolchange = 10 +retract_lift = 0.1 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +silent_mode = 1 +single_extruder_multi_material = 0 +start_gcode = G28 ; home all axes\nG1 X0 Y0 Z3 F2500 ; lift nozzle\nG92 E0 ;Reset Extruder\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature] ; wait for nozzle\nG1 X1 Y0 Z[first_layer_height] F5000.0\nG1 X150 Y0 F1500.0 E12 ; Draw line\nG1 X150 Y5 F5000 ; wipe\nG1 Z1 F2500; lift\nG92 E0; reset Extruder +template_custom_gcode = +thumbnails = +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 0 +z_offset = 0 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/snapshot.ini b/PrusaSlicer/snapshots/20211112T225913Z/snapshot.ini new file mode 100644 index 0000000..add7140 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/snapshot.ini @@ -0,0 +1,23 @@ +# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-12 at 22:59:14 UTC + +[snapshot] +id = 20211112T225913Z +time_captured = 20211112T225913Z +slic3r_version_captured = 2.3.3+linux-x64 +comment = +reason = upgrade + +[presets] +print = delta +sla_print = +filament = PETG-DasFilament_Saphirblau +sla_material = +printer = delta +physical_printer = + +[Vendor:PrusaResearch] +version = 1.2.4 +min_slic3r_version = 2.3.0-rc1 +max_slic3r_version = 2147483647.2147483647.2147483647 +model_MINI = 0.25;0.4;0.6 +model_MK3S = 0.4 diff --git a/PrusaSlicer/snapshots/20211112T225913Z/vendor/PrusaResearch.ini b/PrusaSlicer/snapshots/20211112T225913Z/vendor/PrusaResearch.ini new file mode 100644 index 0000000..796d578 --- /dev/null +++ b/PrusaSlicer/snapshots/20211112T225913Z/vendor/PrusaResearch.ini @@ -0,0 +1,6063 @@ +# Print profiles for the Prusa Research printers. + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = Prusa Research +# Configuration version of this file. Config file will only be installed, if the config_version differs. +# This means, the server may force the PrusaSlicer configuration to be downgraded. +config_version = 1.2.4 +# Where to get the updates from? +config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ +changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% + +# The printer models will be shown by the Configuration Wizard in this order, +# also the first model installed & the first nozzle installed will be activated after install. +#TODO: One day we may differentiate variants of the nozzles / hot ends, +#for example by the melt zone size, or whether the nozzle is hardened. +# Printer model name will be shown by the installation wizard. + + +[printer_model:MINI] +name = Original Prusa MINI && MINI+ +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MINI +bed_model = mini_bed.stl +bed_texture = mini.svg +default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PVB + +[printer_model:MK3S] +name = Original Prusa i3 MK3S && MK3S+ +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK3 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB + +[printer_model:MK3] +name = Original Prusa i3 MK3 +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK3 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB + +[printer_model:MK3SMMU2S] +name = Original Prusa i3 MK3S && MK3S+ MMU2S +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK3 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 + +[printer_model:MK3MMU2] +name = Original Prusa i3 MK3 MMU2 +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK3 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 + +[printer_model:MK2.5S] +name = Original Prusa i3 MK2.5S +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK2.5 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB + +[printer_model:MK2.5] +name = Original Prusa i3 MK2.5 +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK2.5 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB + +[printer_model:MK2.5SMMU2S] +name = Original Prusa i3 MK2.5S MMU2S +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK2.5 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 + +[printer_model:MK2.5MMU2] +name = Original Prusa i3 MK2.5 MMU2 +variants = 0.4; 0.25; 0.6; 0.8 +technology = FFF +family = MK2.5 +bed_model = mk3_bed.stl +bed_texture = mk3.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 + +[printer_model:MK2S] +name = Original Prusa i3 MK2S +variants = 0.4; 0.25; 0.6 +technology = FFF +family = MK2 +bed_model = mk2_bed.stl +bed_texture = mk2.svg +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB + +[printer_model:MK2SMM] +name = Original Prusa i3 MK2S MMU1 +variants = 0.4; 0.6 +technology = FFF +family = MK2 +bed_model = mk2_bed.stl +bed_texture = mk2.svg +default_materials = Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend; Prusament PVB + +[printer_model:SL1] +name = Original Prusa SL1 +variants = default +technology = SLA +family = SL1 +bed_model = sl1_bed.stl +bed_texture = sl1.svg +default_materials = Prusa Orange Tough @0.05 + +# All presets starting with asterisk, for example *common*, are intermediate and they will +# not make it into the user interface. + +# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle. +# All other print presets will derive from the *common* print preset. +[print:*common*] +avoid_crossing_perimeters = 0 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeters_first = 0 +external_perimeter_extrusion_width = 0.45 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 45 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 20 +gap_fill_speed = 40 +gcode_comments = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +interface_shells = 0 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +overhangs = 0 +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +perimeters = 2 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 1 +skirts = 1 +skirt_distance = 2 +skirt_height = 3 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_extruder = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_enforce_layers = 0 +support_material_contact_distance = 0.1 +support_material_interface_contact_loops = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 80% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 55 +support_material_with_sheath = 0 +support_material_xy_spacing = 50% +thin_walls = 0 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 40 +travel_speed = 180 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 +top_solid_min_thickness = 0.7 +bottom_solid_min_thickness = 0.5 +gcode_label_objects = 1 +infill_anchor = 2.5 +infill_anchor_max = 12 + +[print:*MK3*] +fill_pattern = grid +single_extruder_multi_material_priming = 0 +travel_speed = 180 +wipe_tower_x = 170 +wipe_tower_y = 125 + +[print:*MK306*] +fill_pattern = gyroid +fill_density = 15% +single_extruder_multi_material_priming = 0 +travel_speed = 180 +wipe_tower_x = 170 +wipe_tower_y = 125 + +## MINI + +[print:*MINI*] +fill_pattern = grid +travel_speed = 150 +wipe_tower = 0 +default_acceleration = 1250 +first_layer_acceleration = 800 +infill_acceleration = 1000 +bridge_acceleration = 1000 +support_material_speed = 40 +max_print_speed = 150 +extruder_clearance_height = 20 +extruder_clearance_radius = 35 + +# Print parameters common to a 0.25mm diameter nozzle. +[print:*0.25nozzle*] +elefant_foot_compensation = 0 +external_perimeter_extrusion_width = 0.25 +extrusion_width = 0.25 +first_layer_extrusion_width = 0.3 +infill_extrusion_width = 0.25 +perimeter_extrusion_width = 0.25 +solid_infill_extrusion_width = 0.25 +top_infill_extrusion_width = 0.25 +support_material_extrusion_width = 0.25 +support_material_interface_layers = 0 +support_material_interface_spacing = 0.15 +support_material_spacing = 1 +support_material_xy_spacing = 150% +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode + +[print:*0.25nozzleMK3*] +inherits = *0.25nozzle* +perimeter_speed = 30 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 45 +solid_infill_speed = 45 +top_solid_infill_speed = 30 +support_material_speed = 40 +bridge_speed = 20 +gap_fill_speed = 30 +perimeter_acceleration = 500 +infill_acceleration = 1000 +bridge_acceleration = 500 +first_layer_acceleration = 500 +default_acceleration = 1000 +max_print_speed = 80 +perimeters = 3 +fill_pattern = grid +fill_density = 20% + +[print:*0.25nozzleMINI*] +inherits = *0.25nozzleMK3* +infill_speed = 40 +solid_infill_speed = 40 +infill_acceleration = 800 +first_layer_acceleration = 500 + +# Print parameters common to a 0.6mm diameter nozzle. +[print:*0.6nozzle*] +external_perimeter_extrusion_width = 0.61 +extrusion_width = 0.67 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.7 +perimeter_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.65 +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.55 +support_material_contact_distance = 0.15 +support_material_xy_spacing = 80% +support_material_interface_spacing = 0.3 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +infill_anchor_max = 15 +top_solid_min_thickness = 0.9 +bottom_solid_min_thickness = 0.6 + +[print:*0.8nozzle*] +external_perimeter_extrusion_width = 0.9 +extrusion_width = 0.9 +first_layer_extrusion_width = 0.9 +infill_extrusion_width = 0.9 +perimeter_extrusion_width = 0.9 +solid_infill_extrusion_width = 0.9 +top_infill_extrusion_width = 0.8 +support_material_extrusion_width = 0.7 +support_material_contact_distance = 0.25 +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_spacing = 2 +support_material_xy_spacing = 80% +support_material_threshold = 50 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +fill_pattern = gyroid +fill_density = 15% +infill_anchor_max = 20 +top_solid_layers = 4 +bottom_solid_layers = 3 +skirt_distance = 3 +skirt_height = 2 +first_layer_height = 0.3 +infill_overlap = 30% +bridge_speed = 22 +gap_fill_speed = 30 +bridge_flow_ratio = 0.9 +perimeter_acceleration = 800 +infill_acceleration = 1000 +bridge_acceleration = 1000 +first_layer_acceleration = 1000 +default_acceleration = 1000 +top_solid_min_thickness = 1.2 +bottom_solid_min_thickness = 0.8 +single_extruder_multi_material_priming = 0 + +[print:*0.6nozzleMK3*] +inherits = *0.6nozzle* +external_perimeter_extrusion_width = 0.65 +extrusion_width = 0.65 +infill_extrusion_width = 0.65 +bridge_flow_ratio = 0.95 +bridge_speed = 25 + +[print:*0.6nozzleMINI*] +inherits = *0.6nozzleMK3* +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +fill_pattern = gyroid +fill_density = 15% +travel_speed = 150 +perimeter_acceleration = 800 +infill_acceleration = 1000 +bridge_acceleration = 1000 +first_layer_acceleration = 1000 +default_acceleration = 1250 +support_material_speed = 40 +support_material_interface_speed = 100% + +[print:*soluble_support*] +overhangs = 1 +skirts = 0 +support_material = 1 +support_material_contact_distance = 0 +support_material_extruder = 4 +support_material_extrusion_width = 0.45 +support_material_interface_extruder = 4 +support_material_interface_spacing = 0.1 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 1 +wipe_tower_bridging = 6 +support_material_interface_speed = 80% + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.05mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.05mm*] +inherits = *common* +bottom_solid_layers = 10 +bridge_acceleration = 300 +bridge_flow_ratio = 0.7 +default_acceleration = 1000 +external_perimeter_speed = 20 +fill_density = 20% +first_layer_acceleration = 500 +gap_fill_speed = 20 +infill_acceleration = 800 +infill_speed = 30 +max_print_speed = 80 +small_perimeter_speed = 20 +solid_infill_speed = 30 +support_material_extrusion_width = 0.3 +support_material_spacing = 1.5 +layer_height = 0.05 +perimeter_acceleration = 300 +perimeter_speed = 30 +perimeters = 3 +support_material_speed = 30 +top_solid_infill_speed = 20 +top_solid_layers = 15 + +[print:0.05mm ULTRADETAIL] +inherits = *0.05mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 +infill_extrusion_width = 0.5 + +# MK3 # +[print:0.05mm ULTRADETAIL @MK3] +inherits = *0.05mm*; *MK3* +fill_pattern = gyroid +fill_density = 15% +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material +top_infill_extrusion_width = 0.4 + +# MK2 # +[print:0.05mm ULTRADETAIL @0.25 nozzle] +inherits = *0.05mm*; *0.25nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +fill_density = 20% +infill_speed = 20 +max_print_speed = 100 +perimeter_speed = 20 +small_perimeter_speed = 15 +solid_infill_speed = 20 +support_material_speed = 20 + +# MK3 # +[print:0.05mm ULTRADETAIL @0.25 nozzle MK3] +inherits = *0.05mm*; *0.25nozzle*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +fill_pattern = grid +fill_density = 20% + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.07mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.07mm*] +inherits = *common* +bottom_solid_layers = 8 +bridge_acceleration = 300 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +default_acceleration = 1000 +external_perimeter_speed = 20 +fill_density = 15% +first_layer_acceleration = 500 +gap_fill_speed = 20 +infill_acceleration = 800 +infill_speed = 40 +max_print_speed = 80 +small_perimeter_speed = 20 +solid_infill_speed = 40 +support_material_extrusion_width = 0.3 +support_material_spacing = 1.5 +layer_height = 0.07 +perimeter_acceleration = 300 +perimeter_speed = 30 +perimeters = 3 +support_material_speed = 40 +top_solid_infill_speed = 30 +top_solid_layers = 11 + +# MK3 # +[print:0.07mm ULTRADETAIL @MK3] +inherits = *0.07mm*; *MK3* +fill_pattern = gyroid +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material +top_infill_extrusion_width = 0.4 + +[print:0.07mm ULTRADETAIL @0.25 nozzle MK3] +inherits = *0.07mm*; *0.25nozzle*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +infill_speed = 30 +solid_infill_speed = 30 +support_material_speed = 30 +top_solid_infill_speed = 20 +fill_pattern = grid +fill_density = 20% + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.10mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +# MK2 # +[print:*0.10mm*] +inherits = *common* +bottom_solid_layers = 7 +bridge_flow_ratio = 0.7 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 +layer_height = 0.1 +perimeter_acceleration = 800 +top_solid_layers = 9 + +# MK2 # +[print:0.10mm DETAIL] +inherits = *0.10mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +perimeter_speed = 50 +solid_infill_speed = 50 +perimeters = 3 + +# MK3 # +[print:0.10mm DETAIL @MK3] +inherits = *0.10mm*; *MK3* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 80 +max_print_speed = 200 +perimeter_speed = 45 +solid_infill_speed = 80 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% +perimeters = 3 + +# MK2 # +[print:0.10mm DETAIL @0.25 nozzle] +inherits = *0.10mm*; *0.25nozzle* +bridge_acceleration = 600 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 +external_perimeter_speed = 20 +infill_acceleration = 1000 +infill_speed = 40 +perimeter_acceleration = 600 +perimeter_speed = 25 +small_perimeter_speed = 15 +solid_infill_speed = 40 +top_solid_infill_speed = 30 + +# MK3 # +[print:0.10mm DETAIL @0.25 nozzle MK3] +inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.15mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.15mm*] +inherits = *common* +bottom_solid_layers = 5 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.15 +perimeter_acceleration = 800 +perimeter_speed = 50 +solid_infill_speed = 50 +top_infill_extrusion_width = 0.4 +top_solid_layers = 7 + +# MK2 # +[print:0.15mm 100mms Linear Advance] +inherits = *0.15mm* +bridge_flow_ratio = 0.95 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 50 +infill_speed = 100 +max_print_speed = 150 +perimeter_speed = 60 +small_perimeter_speed = 30 +solid_infill_speed = 100 +support_material_speed = 60 +top_solid_infill_speed = 70 + +# MK2 # +[print:0.15mm OPTIMAL] +inherits = *0.15mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +top_infill_extrusion_width = 0.45 + +# MK2 # +[print:0.15mm OPTIMAL @0.25 nozzle] +inherits = *0.15mm*; *0.25nozzle* +bridge_acceleration = 600 +bridge_flow_ratio = 0.7 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 +external_perimeter_speed = 20 +infill_acceleration = 1000 +infill_speed = 40 +perimeter_acceleration = 600 +perimeter_speed = 25 +small_perimeter_speed = 15 +solid_infill_speed = 40 +top_solid_infill_speed = 30 + +# MK2 # +[print:0.15mm OPTIMAL @0.6 nozzle] +inherits = *0.15mm*; *0.6nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 + +# MK3 # +[print:0.15mm QUALITY @MK3] +inherits = *0.15mm*; *MK3* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 80 +max_print_speed = 200 +perimeter_speed = 45 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% + +[print:0.15mm SPEED @MK3] +inherits = *0.15mm*; *MK3* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 200 +max_print_speed = 200 +perimeter_speed = 60 +solid_infill_speed = 200 +top_solid_infill_speed = 50 + +# MK3 MMU # +[print:0.15mm SOLUBLE FULL @MK3] +inherits = 0.15mm SPEED @MK3; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +support_material_extruder = 5 +support_material_interface_extruder = 5 +perimeter_speed = 40 +solid_infill_speed = 40 +infill_speed = 80 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 +support_material_speed = 45 + +# MK3 MMU # +[print:0.15mm SOLUBLE INTERFACE @MK3] +inherits = 0.15mm SOLUBLE FULL @MK3 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 + +# MK2 MMU # +[print:0.15mm OPTIMAL SOLUBLE FULL] +inherits = *0.15mm*; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +external_perimeter_speed = 25 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +perimeter_speed = 40 +solid_infill_speed = 40 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 + +# MK2 MMU # +[print:0.15mm OPTIMAL SOLUBLE INTERFACE] +inherits = 0.15mm OPTIMAL SOLUBLE FULL +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% + +# MK3 # +[print:0.15mm QUALITY @0.25 nozzle MK3] +inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% + +# MK3 # +[print:0.15mm DETAIL @0.6 nozzle MK3] +inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.20mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.20mm*] +inherits = *common* +bottom_solid_layers = 4 +bridge_flow_ratio = 0.95 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.2 +perimeter_acceleration = 800 +perimeter_speed = 50 +solid_infill_speed = 50 +top_infill_extrusion_width = 0.4 +top_solid_layers = 5 + +# MK2 # +[print:0.20mm 100mms Linear Advance] +inherits = *0.20mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 50 +infill_speed = 100 +max_print_speed = 150 +perimeter_speed = 60 +small_perimeter_speed = 30 +solid_infill_speed = 100 +support_material_speed = 60 +top_solid_infill_speed = 70 + +# MK3 # +[print:0.20mm QUALITY @MK3] +inherits = *0.20mm*; *MK3* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 80 +max_print_speed = 200 +perimeter_speed = 45 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% + +[print:0.20mm SPEED @MK3] +inherits = *0.20mm*; *MK3* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 200 +max_print_speed = 200 +perimeter_speed = 60 +solid_infill_speed = 200 +top_solid_infill_speed = 50 + +# MK3 MMU # +[print:0.20mm SOLUBLE FULL @MK3] +inherits = 0.20mm SPEED @MK3; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +support_material_extruder = 5 +support_material_interface_extruder = 5 +perimeter_speed = 40 +solid_infill_speed = 40 +infill_speed = 80 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 +support_material_speed = 45 + +# MK3 MMU # +[print:0.20mm SOLUBLE INTERFACE @MK3] +inherits = 0.20mm SOLUBLE FULL @MK3 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 + +# MK2 # +[print:0.20mm NORMAL] +inherits = *0.20mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 + +# MK2 # +[print:0.20mm NORMAL @0.6 nozzle] +inherits = *0.20mm*; *0.6nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 + +# MK2 MMU # +[print:0.20mm NORMAL SOLUBLE FULL] +inherits = *0.20mm*; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +external_perimeter_speed = 30 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +perimeter_speed = 40 +solid_infill_speed = 40 +top_solid_infill_speed = 30 + +# MK2 MMU # +[print:0.20mm NORMAL SOLUBLE INTERFACE] +inherits = 0.20mm NORMAL SOLUBLE FULL +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% + +# MK3 # +[print:0.20mm DETAIL @0.6 nozzle MK3] +inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 + + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.25mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.25mm*] +inherits = *common* +bottom_solid_layers = 4 +bridge_flow_ratio = 0.95 +external_perimeter_speed = 40 +perimeter_acceleration = 800 +layer_height = 0.25 +perimeter_speed = 50 +top_solid_layers = 4 + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.30mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.30mm*] +inherits = *common* +bottom_solid_layers = 4 +bridge_flow_ratio = 0.95 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.3 +perimeter_acceleration = 800 +perimeter_speed = 50 +solid_infill_speed = 50 +top_infill_extrusion_width = 0.4 +top_solid_layers = 4 + +[print:0.30mm QUALITY @0.6 nozzle MK3] +inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 + +[print:0.30mm SOLUBLE FULL @0.6 nozzle MK3] +inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +support_material_extruder = 5 +support_material_interface_extruder = 5 +support_material_speed = 40 +perimeter_speed = 40 +solid_infill_speed = 40 +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.6 +top_solid_infill_speed = 30 +support_material_xy_spacing = 80% + +[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3] +inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 + +[print:0.30mm DRAFT @MK3] +inherits = *0.30mm*; *MK3* +bottom_solid_layers = 3 +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 85 +max_print_speed = 200 +perimeter_speed = 50 +small_perimeter_speed = 30 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_speed = 45 +external_perimeter_extrusion_width = 0.6 +extrusion_width = 0.5 +first_layer_extrusion_width = 0.42 +infill_extrusion_width = 0.5 +perimeter_extrusion_width = 0.5 +solid_infill_extrusion_width = 0.5 +top_infill_extrusion_width = 0.45 +support_material_extrusion_width = 0.38 + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.35mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.35mm*] +inherits = *common* +bottom_solid_layers = 3 +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 40 +first_layer_extrusion_width = 0.75 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.35 +perimeter_acceleration = 800 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +top_solid_infill_speed = 50 +top_solid_layers = 4 + +# MK2 # +[print:0.35mm FAST] +inherits = *0.35mm* +bridge_flow_ratio = 0.95 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +first_layer_extrusion_width = 0.42 +perimeter_extrusion_width = 0.43 +solid_infill_extrusion_width = 0.7 +top_infill_extrusion_width = 0.43 +support_material_extrusion_width = 0.37 + +# MK2 # +[print:0.35mm FAST @0.6 nozzle] +inherits = *0.35mm*; *0.6nozzle* +# alias = 0.35mm FAST +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 + +# MK2 MMU # +[print:0.35mm FAST sol full @0.6 nozzle] +inherits = *0.35mm*; *0.6nozzle*; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 30 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +perimeter_speed = 40 +support_material_speed = 40 +support_material_interface_layers = 2 +support_material_xy_spacing = 120% +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.6 + +# MK2 MMU # +[print:0.35mm FAST sol int @0.6 nozzle] +inherits = 0.35mm FAST sol full @0.6 nozzle +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% + +# MK3 # +[print:0.35mm SPEED @0.6 nozzle MK3] +inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.40mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.40mm*] +inherits = *common* +bottom_solid_layers = 3 +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 40 +first_layer_extrusion_width = 0.65 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.4 +perimeter_acceleration = 800 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +top_solid_infill_speed = 40 +top_solid_layers = 4 + +# MK3 # +[print:0.40mm DRAFT @0.6 nozzle MK3] +inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 + +# XXXXXXXXXXXXXXXXXXXXXX +# XXX----- MK2.5 ----XXX +# XXXXXXXXXXXXXXXXXXXXXX + +# MK2.5 # +[print:0.15mm 100mms Linear Advance @MK2.5] +inherits = 0.15mm 100mms Linear Advance +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +# MK2.5 # +[print:0.15mm OPTIMAL @MK2.5] +inherits = 0.15mm OPTIMAL +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +# MK2.5 MMU2 # +[print:0.10mm DETAIL @MK2.5] +inherits = 0.10mm DETAIL +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +single_extruder_multi_material_priming = 0 + +# MK2.5 MMU2 # +[print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5] +inherits = 0.15mm OPTIMAL SOLUBLE FULL +support_material_extruder = 5 +support_material_interface_extruder = 5 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 + +# MK2.5 MMU2 # +[print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5] +inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE +support_material_extruder = 0 +support_material_interface_extruder = 5 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 + +# MK2.5 # +[print:0.20mm 100mms Linear Advance @MK2.5] +inherits = 0.20mm 100mms Linear Advance +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +# MK2.5 # +[print:0.20mm NORMAL @MK2.5] +inherits = 0.20mm NORMAL +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +# MK2.5 MMU2 # +[print:0.20mm NORMAL SOLUBLE FULL @MK2.5] +inherits = 0.20mm NORMAL SOLUBLE FULL +support_material_extruder = 5 +support_material_interface_extruder = 5 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +single_extruder_multi_material_priming = 0 + +# MK2.5 MMU2 # +[print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5] +inherits = 0.20mm NORMAL SOLUBLE INTERFACE +support_material_extruder = 0 +support_material_interface_extruder = 5 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +single_extruder_multi_material_priming = 0 + +# MK2.5 # +[print:0.35mm FAST @MK2.5] +inherits = 0.35mm FAST +# alias = 0.35mm FAST +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +# MK2.5 MMU2 0.6 nozzle # +[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5] +inherits = *0.35mm*; *0.6nozzle*; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 30 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +perimeter_speed = 40 +support_material_speed = 40 +support_material_interface_layers = 2 +support_material_xy_spacing = 80% +support_material_extruder = 5 +support_material_interface_extruder = 5 +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.6 + +[print:0.35mm SOLUBLE INTERFACE @0.6 nozzle MK2.5] +inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5 +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% + +## 0.8mm nozzle print profiles + +[print:0.30mm DETAIL @0.8 nozzle] +inherits = *common*; *0.8nozzle* +layer_height = 0.30 +## Only for MMU2 Single mode at the moment +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 +perimeter_speed = 35 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 50 +max_print_speed = 80 +solid_infill_speed = 50 +top_solid_infill_speed = 35 +support_material_speed = 40 + +[print:0.40mm QUALITY @0.8 nozzle] +inherits = *common*; *0.8nozzle* +layer_height = 0.4 +## Only for MMU2 Single mode at the moment +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 +perimeter_speed = 35 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 50 +max_print_speed = 50 +solid_infill_speed = 45 +top_solid_infill_speed = 35 +support_material_speed = 40 + +[print:0.55mm DRAFT @0.8 nozzle] +inherits = *common*; *0.8nozzle* +layer_height = 0.55 +## Only for MMU2 Single mode at the moment +compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 +perimeter_speed = 30 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 50 +max_print_speed = 50 +solid_infill_speed = 40 +support_material_speed = 35 +support_material_contact_distance = 0.25 +top_solid_infill_speed = 30 +external_perimeter_extrusion_width = 1 +perimeter_extrusion_width = 1 + +## MINI print profiles + +# 0.4mm nozzle + +[print:0.05mm ULTRADETAIL @MINI] +inherits = *0.05mm*; *MINI* +fill_pattern = gyroid +fill_density = 15% +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +top_infill_extrusion_width = 0.4 +small_perimeter_speed = 15 +perimeter_extrusion_width = 0.4 +external_perimeter_extrusion_width = 0.4 +support_material_xy_spacing = 60% +support_material_speed = 30 + +[print:0.07mm ULTRADETAIL @MINI] +inherits = *0.07mm*; *MINI* +fill_pattern = gyroid +fill_density = 15% +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +top_infill_extrusion_width = 0.4 +small_perimeter_speed = 15 +perimeter_extrusion_width = 0.4 +external_perimeter_extrusion_width = 0.4 +support_material_xy_spacing = 60% + +[print:0.10mm DETAIL @MINI] +inherits = *0.10mm*; *MINI* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +perimeter_speed = 40 +external_perimeter_speed = 30 +infill_speed = 80 +solid_infill_speed = 80 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% +perimeters = 3 +bridge_acceleration = 1000 +support_material_xy_spacing = 60% + +[print:0.15mm QUALITY @MINI] +inherits = *0.15mm*; *MINI* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +perimeter_speed = 40 +external_perimeter_speed = 30 +infill_speed = 80 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% +bridge_flow_ratio = 0.85 +support_material_xy_spacing = 60% + +[print:0.15mm SPEED @MINI] +inherits = *0.15mm*; *MINI* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +perimeter_speed = 50 +external_perimeter_speed = 40 +infill_speed = 140 +solid_infill_speed = 140 +top_solid_infill_speed = 40 +bridge_flow_ratio = 0.85 +support_material_xy_spacing = 60% + +[print:0.20mm QUALITY @MINI] +inherits = *0.20mm*; *MINI* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +perimeter_speed = 40 +external_perimeter_speed = 30 +infill_speed = 80 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% +support_material_xy_spacing = 60% + +[print:0.20mm SPEED @MINI] +inherits = *0.20mm*; *MINI* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +perimeter_speed = 50 +external_perimeter_speed = 40 +infill_speed = 140 +max_print_speed = 150 +solid_infill_speed = 140 +top_solid_infill_speed = 40 +support_material_xy_spacing = 60% + +[print:0.25mm DRAFT @MINI] +inherits = *0.25mm*; *MINI* +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 40 +infill_speed = 110 +perimeter_speed = 55 +small_perimeter_speed = 25 +solid_infill_speed = 100 +top_solid_infill_speed = 45 +first_layer_extrusion_width = 0.42 +infill_extrusion_width = 0.45 +solid_infill_extrusion_width = 0.45 +top_infill_extrusion_width = 0.4 +support_material_xy_spacing = 60% + +# 0.25mm nozzle + +[print:0.05mm ULTRADETAIL @0.25 nozzle MINI] +inherits = *0.05mm*; *0.25nozzle*; *MINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% +support_material_speed = 30 + +[print:0.07mm ULTRADETAIL @0.25 nozzle MINI] +inherits = *0.07mm*; *0.25nozzle*; *MINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 +infill_speed = 30 +solid_infill_speed = 30 +support_material_speed = 30 +top_solid_infill_speed = 20 +fill_pattern = grid +fill_density = 20% + +[print:0.10mm DETAIL @0.25 nozzle MINI] +inherits = *0.10mm*; *0.25nozzleMINI*; *MINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% + +[print:0.15mm QUALITY @0.25 nozzle MINI] +inherits = *0.15mm*; *0.25nozzleMINI*; *MINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% + +# 0.6mm nozzle MINI + +[print:0.15mm DETAIL @0.6 nozzle MINI] +inherits = *0.15mm*; *0.6nozzleMINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +infill_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.65 + +[print:0.20mm DETAIL @0.6 nozzle MINI] +inherits = *0.20mm*; *0.6nozzleMINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +infill_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.65 + +[print:0.30mm QUALITY @0.6 nozzle MINI] +inherits = *0.30mm*; *0.6nozzleMINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 65 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 65 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 + +[print:0.35mm SPEED @0.6 nozzle MINI] +inherits = *0.35mm*; *0.6nozzleMINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 60 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 60 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 + +[print:0.40mm DRAFT @0.6 nozzle MINI] +inherits = *0.40mm*; *0.6nozzleMINI* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 50 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 50 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 + +# 0.8mm nozzle MINI + +[print:0.30mm DETAIL @0.8 nozzle MINI] +inherits = 0.30mm DETAIL @0.8 nozzle +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8 +perimeter_speed = 35 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 50 +max_print_speed = 80 +solid_infill_speed = 45 +top_solid_infill_speed = 35 +support_material_speed = 40 +travel_speed = 150 + +[print:0.40mm QUALITY @0.8 nozzle MINI] +inherits = 0.40mm QUALITY @0.8 nozzle +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8 +infill_speed = 40 +max_print_speed = 50 +solid_infill_speed = 40 +top_solid_infill_speed = 30 +support_material_speed = 40 +travel_speed = 150 + +[print:0.55mm DRAFT @0.8 nozzle MINI] +inherits = 0.55mm DRAFT @0.8 nozzle +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8 +infill_acceleration = 1000 +infill_speed = 40 +solid_infill_speed = 40 +support_material_speed = 35 +support_material_contact_distance = 0.25 +top_solid_infill_speed = 28 +external_perimeter_extrusion_width = 1 +perimeter_extrusion_width = 1 +travel_speed = 150 + +# XXXXXXxxXXXXXXXXXXXXXX +# XXX--- filament ---XXX +# XXXXXXXXxxXXXXXXXXXXXX + +[filament:*common*] +cooling = 1 +compatible_printers = +# For now, all but selected filaments are disabled for the MMU 2.0 +compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_toolchange_delay = 0 +filament_cooling_moves = 4 +filament_cooling_initial_speed = 2.2 +filament_cooling_final_speed = 3.4 +filament_load_time = 0 +filament_unload_time = 0 +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_minimal_purge_on_wipe_tower = 15 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_notes = "" +filament_settings_id = "" +filament_soluble = 0 +min_print_speed = 15 +slowdown_below_layer_time = 15 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode" + +[filament:*PLA*] +inherits = *common* +bed_temperature = 60 +bridge_fan_speed = 100 +disable_fan_first_layers = 1 +full_fan_speed_layer = 4 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF8000 +filament_max_volumetric_speed = 15 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 100 +temperature = 210 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" + +[filament:*PET*] +inherits = *common* +bed_temperature = 90 +bridge_fan_speed = 50 +disable_fan_first_layers = 3 +full_fan_speed_layer = 5 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_max_volumetric_speed = 8 +filament_type = PETG +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" +temperature = 240 +filament_retract_length = 1.4 +filament_retract_lift = 0.2 +compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:*PET06*] +inherits = *PET* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +filament_max_volumetric_speed = 15 + +[filament:*PETMMU1*] +inherits = *PET* +filament_retract_length = nil +filament_retract_speed = nil +filament_retract_lift = 0.2 +compatible_printers_condition = printer_model=="MK2SMM" + +[filament:*PETMINI*] +inherits = *PET* +filament_retract_length = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_retract_lift = nil +filament_retract_before_travel = 1 +filament_max_volumetric_speed = 7 +compatible_printers_condition = printer_model=="MINI" +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" + +[filament:*PETMINI06*] +inherits = *PET* +filament_retract_length = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_retract_lift = nil +filament_retract_before_travel = 1 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.6 +start_filament_gcode = "M900 K0.12 ; Filament gcode" +filament_max_volumetric_speed = 13 + +[filament:*ABSMINI*] +inherits = *ABS* +bed_temperature = 100 +filament_retract_length = 2.7 +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = 3 +filament_wipe = 0 +filament_max_volumetric_speed = 10 +slowdown_below_layer_time = 20 +compatible_printers_condition = printer_model=="MINI" +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" + +[filament:*FLEXMINI*] +inherits = *FLEX* +first_layer_temperature = 245 +temperature = 245 +filament_retract_length = 4 +filament_retract_speed = 40 +filament_deretract_speed = 15 +filament_retract_lift = 0 +filament_retract_before_travel = 7 +filament_wipe = 0 +bridge_fan_speed = 80 +fan_always_on = 1 +cooling = 0 +max_fan_speed = 50 +min_fan_speed = 50 +filament_max_volumetric_speed = 1.35 +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" +disable_fan_first_layers = 4 +full_fan_speed_layer = 6 +extrusion_multiplier = 1.15 +filament_density = 1.22 +filament_colour = #F2F200 +start_filament_gcode = "M900 K0 ; Filament gcode" + +[filament:*ABS*] +inherits = *common* +bed_temperature = 110 +bridge_fan_speed = 25 +cooling = 0 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #FFF2EC +filament_max_volumetric_speed = 11 +filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 30 +min_fan_speed = 20 +temperature = 255 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:*ABSC*] +inherits = *common* +bed_temperature = 110 +bridge_fan_speed = 25 +cooling = 1 +disable_fan_first_layers = 4 +fan_always_on = 0 +fan_below_layer_time = 30 +slowdown_below_layer_time = 20 +filament_colour = #FFF2EC +filament_max_volumetric_speed = 11 +filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 15 +min_fan_speed = 15 +min_print_speed = 15 +temperature = 255 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:*FLEX*] +inherits = *common* +bed_temperature = 50 +bridge_fan_speed = 80 +# For now, all but selected filaments are disabled for the MMU 2.0 +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) +cooling = 0 +disable_fan_first_layers = 3 +extrusion_multiplier = 1.15 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #008000 +filament_max_volumetric_speed = 1.5 +filament_type = FLEX +first_layer_bed_temperature = 50 +first_layer_temperature = 240 +max_fan_speed = 90 +min_fan_speed = 70 +start_filament_gcode = "M900 K0"; Filament gcode" +temperature = 240 +filament_retract_length = 0.8 +filament_deretract_speed = 25 +filament_retract_lift = 0 +filament_wipe = 0 + +[filament:ColorFabb bronzeFill] +inherits = *PLA* +filament_vendor = ColorFabb +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.2 +filament_cost = 80.65 +filament_density = 3.9 +filament_spool_weight = 236 +filament_colour = #804040 +filament_max_volumetric_speed = 9 + +[filament:ColorFabb steelFill] +inherits = *PLA* +filament_vendor = ColorFabb +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.2 +filament_cost = 80.65 +filament_density = 3.13 +filament_spool_weight = 236 +filament_colour = #808080 +filament_max_volumetric_speed = 8 + +[filament:ColorFabb copperFill] +inherits = *PLA* +filament_vendor = ColorFabb +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.2 +filament_cost = 80.65 +filament_density = 3.9 +filament_spool_weight = 236 +filament_colour = #82603E +filament_max_volumetric_speed = 9 + +[filament:ColorFabb HT] +inherits = *PET* +filament_vendor = ColorFabb +bed_temperature = 110 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_cost = 65.66 +filament_density = 1.18 +filament_spool_weight = 236 +first_layer_bed_temperature = 105 +first_layer_temperature = 270 +max_fan_speed = 20 +min_fan_speed = 10 +temperature = 270 + +[filament:ColorFabb PLA-PHA] +inherits = *PLA* +filament_vendor = ColorFabb +filament_cost = 54.84 +filament_density = 1.24 +filament_spool_weight = 236 + +[filament:ColorFabb woodFill] +inherits = *PLA* +filament_vendor = ColorFabb +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.1 +filament_cost = 78.63 +filament_density = 1.15 +filament_spool_weight = 236 +filament_colour = #dfc287 +filament_max_volumetric_speed = 9 +first_layer_temperature = 200 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 200 +filament_retract_lift = 0.2 + +[filament:ColorFabb corkFill] +inherits = *PLA* +filament_vendor = ColorFabb +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.1 +filament_cost = 78.63 +filament_density = 1.18 +filament_spool_weight = 236 +filament_colour = #634d33 +filament_max_volumetric_speed = 6 +first_layer_temperature = 220 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 220 +filament_retract_lift = 0.2 + +[filament:ColorFabb XT] +inherits = *PET* +filament_vendor = ColorFabb +filament_cost = 62.90 +filament_density = 1.27 +filament_spool_weight = 236 +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +temperature = 270 + +[filament:ColorFabb XT-CF20] +inherits = *PET* +filament_vendor = ColorFabb +extrusion_multiplier = 1.05 +filament_cost = 80.65 +filament_density = 1.35 +filament_spool_weight = 236 +filament_colour = #804040 +filament_max_volumetric_speed = 2 +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +temperature = 260 +filament_retract_length = nil +filament_retract_lift = 0.4 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:ColorFabb nGen] +inherits = *PET* +filament_vendor = ColorFabb +filament_cost = 52.46 +filament_density = 1.2 +filament_spool_weight = 236 +bridge_fan_speed = 40 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_type = NGEN +first_layer_temperature = 240 +max_fan_speed = 35 +min_fan_speed = 20 + +[filament:ColorFabb nGen flex] +inherits = *FLEX* +filament_vendor = ColorFabb +filament_cost = 58.30 +filament_density = 1 +filament_spool_weight = 236 +bed_temperature = 85 +bridge_fan_speed = 40 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_below_layer_time = 10 +filament_max_volumetric_speed = 5 +first_layer_bed_temperature = 85 +first_layer_temperature = 260 +max_fan_speed = 35 +min_fan_speed = 20 +temperature = 260 +filament_retract_length = nil +filament_retract_lift = 0 +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) + +[filament:Kimya PETG Carbon] +inherits = *PET* +filament_vendor = Kimya +extrusion_multiplier = 1.05 +filament_cost = 150.02 +filament_density = 1.317 +filament_colour = #804040 +filament_max_volumetric_speed = 6 +first_layer_bed_temperature = 85 +first_layer_temperature = 240 +temperature = 240 +filament_retract_length = nil +filament_retract_lift = 0.3 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Kimya ABS Carbon] +inherits = *ABSC* +filament_vendor = Kimya +filament_cost = 140.34 +filament_density = 1.032 +filament_colour = #804040 +filament_max_volumetric_speed = 6 +first_layer_temperature = 260 +temperature = 260 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Kimya ABS Kevlar] +inherits = Kimya ABS Carbon +filament_vendor = Kimya +filament_density = 1.037 + +[filament:E3D Edge] +inherits = *PET* +filament_vendor = E3D +filament_cost = 56.9 +filament_density = 1.26 +filament_type = EDGE +compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:E3D PC-ABS] +inherits = *ABS* +filament_vendor = E3D +filament_cost = 0 +filament_type = PC +filament_density = 1.05 +first_layer_temperature = 270 +temperature = 270 + +[filament:Fillamentum PLA] +inherits = *PLA* +filament_vendor = Fillamentum +filament_cost = 35.48 +filament_density = 1.24 +filament_spool_weight = 230 + +[filament:Fillamentum ABS] +inherits = *ABSC* +filament_vendor = Fillamentum +filament_cost = 32.4 +filament_density = 1.04 +filament_spool_weight = 230 +first_layer_temperature = 240 +temperature = 240 + +[filament:Fillamentum ASA] +inherits = *ABS* +filament_vendor = Fillamentum +filament_cost = 38.7 +filament_density = 1.07 +filament_spool_weight = 230 +fan_always_on = 1 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +min_print_speed = 15 +slowdown_below_layer_time = 15 +first_layer_temperature = 265 +temperature = 265 +filament_type = ASA + +[filament:Prusament ASA] +inherits = *ABS* +filament_vendor = Prusa Polymers +filament_cost = 42.69 +filament_density = 1.07 +filament_spool_weight = 201 +fan_always_on = 1 +first_layer_temperature = 260 +first_layer_bed_temperature = 105 +temperature = 260 +bed_temperature = 110 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +bridge_fan_speed = 30 +min_print_speed = 15 +slowdown_below_layer_time = 15 +disable_fan_first_layers = 4 +filament_type = ASA +filament_colour = #FFF2EC +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusament PC Blend] +inherits = *ABS* +filament_vendor = Prusa Polymers +filament_cost = 60.49 +filament_density = 1.22 +filament_spool_weight = 201 +fan_always_on = 0 +first_layer_temperature = 275 +first_layer_bed_temperature = 110 +temperature = 275 +bed_temperature = 115 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +bridge_fan_speed = 30 +min_print_speed = 15 +slowdown_below_layer_time = 20 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +filament_type = PC +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 8 +filament_retract_length = 1 +filament_retract_lift = 0.2 +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" + +[filament:Prusament PC Blend @MK2] +inherits = *ABS* +filament_vendor = Prusa Polymers +filament_cost = 60.49 +filament_density = 1.22 +filament_spool_weight = 201 +fan_always_on = 0 +first_layer_temperature = 275 +first_layer_bed_temperature = 105 +temperature = 275 +bed_temperature = 110 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +min_print_speed = 15 +bridge_fan_speed = 30 +slowdown_below_layer_time = 20 +disable_fan_first_layers = 6 +fan_below_layer_time = 30 +filament_type = PC +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 8 +filament_retract_length = 1 +filament_retract_lift = 0.2 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" + +[filament:Prusament PC Blend @MK2MMU1] +inherits = Prusament PC Blend @MK2 +filament_retract_length = nil +filament_retract_lift = 0.2 +compatible_printers_condition = printer_model=="MK2SMM" +start_filament_gcode = "M900 K200 ; Filament gcode LA 1.0" + +[filament:Fillamentum CPE] +inherits = *PET* +filament_vendor = Fillamentum +filament_cost = 56.45 +filament_density = 1.25 +filament_spool_weight = 230 +filament_type = CPE +first_layer_bed_temperature = 90 +first_layer_temperature = 275 +max_fan_speed = 50 +min_fan_speed = 50 +disable_fan_first_layers = 3 +full_fan_speed_layer = 5 +temperature = 275 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" + +[filament:Fillamentum Timberfill] +inherits = *PLA* +filament_vendor = Fillamentum +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.1 +filament_cost = 68 +filament_density = 1.15 +filament_spool_weight = 230 +filament_colour = #804040 +filament_max_volumetric_speed = 10 +first_layer_temperature = 190 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 190 +filament_retract_lift = 0.2 + +[filament:Smartfil Wood] +inherits = *PLA* +filament_vendor = Smart Materials 3D +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.1 +filament_cost = 68 +filament_density = 1.58 +filament_colour = #804040 +filament_max_volumetric_speed = 9 +first_layer_temperature = 220 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 220 +filament_retract_lift = 0.2 + +[filament:Generic ABS] +inherits = *ABSC* +filament_vendor = Generic +filament_cost = 27.82 +filament_density = 1.04 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Esun ABS] +inherits = *ABSC* +filament_vendor = Esun +filament_cost = 27.82 +filament_density = 1.01 +filament_spool_weight = 265 + +[filament:Hatchbox ABS] +inherits = *ABSC* +filament_vendor = Hatchbox +filament_cost = 27.82 +filament_density = 1.04 +filament_spool_weight = 245 + +[filament:Plasty Mladec ABS] +inherits = *ABSC* +filament_vendor = Plasty Mladec +filament_cost = 27.82 +filament_density = 1.08 +filament_spool_weight = 230 + +[filament:Verbatim ABS] +inherits = *ABSC* +filament_vendor = Verbatim +filament_cost = 25.87 +filament_density = 1.05 +filament_spool_weight = 235 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" + +[filament:Generic PETG] +inherits = *PET* +renamed_from = "Generic PET" +filament_vendor = Generic +filament_cost = 27.82 +filament_density = 1.27 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Plasty Mladec PETG] +inherits = *PET* +filament_vendor = Plasty Mladec +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Generic PLA] +inherits = *PLA* +filament_vendor = Generic +filament_cost = 25.4 +filament_density = 1.24 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Devil Design PLA] +inherits = *PLA* +filament_vendor = Devil Design +filament_cost = 20.99 +filament_density = 1.24 +filament_spool_weight = 250 + +[filament:Devil Design PETG] +inherits = *PET* +filament_vendor = Devil Design +filament_cost = 20.99 +filament_density = 1.23 +filament_spool_weight = 250 +first_layer_temperature = 230 +first_layer_bed_temperature = 85 +temperature = 230 +bed_temperature = 90 + +[filament:Spectrum PLA] +inherits = *PLA* +filament_vendor = Spectrum +filament_cost = 21.50 +filament_density = 1.24 + +[filament:Generic FLEX] +inherits = *FLEX* +filament_vendor = Generic +filament_cost = 82 +filament_density = 1.22 +filament_max_volumetric_speed = 1.2 +filament_retract_length = 0 +filament_retract_speed = nil +filament_retract_lift = nil +compatible_printers_condition = nozzle_diameter[0]>0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) + +[filament:Fillamentum Flexfill 92A] +inherits = *FLEX* +filament_vendor = Fillamentum +filament_cost = 33.99 +filament_density = 1.20 +filament_spool_weight = 230 +filament_max_volumetric_speed = 1.2 +filament_retract_length = 0 +filament_retract_speed = nil +filament_retract_lift = nil +fan_always_on = 1 +cooling = 0 +max_fan_speed = 50 +min_fan_speed = 50 +disable_fan_first_layers = 4 +full_fan_speed_layer = 6 + +[filament:SainSmart TPU] +inherits = *FLEX* +filament_vendor = SainSmart +fan_always_on = 1 +filament_max_volumetric_speed = 2.5 +extrusion_multiplier = 1.1 +first_layer_temperature = 230 +first_layer_bed_temperature = 50 +temperature = 230 +bed_temperature = 50 +bridge_fan_speed = 100 +max_fan_speed = 80 +min_fan_speed = 80 +filament_retract_before_travel = 3 +filament_cost = 32.99 +filament_density = 1.21 +filament_retract_length = 1 +filament_retract_speed = nil +filament_deretract_speed = 25 +filament_retract_lift = 0 +filament_wipe = 0 +disable_fan_first_layers = 4 +full_fan_speed_layer = 6 +min_print_speed = 15 +slowdown_below_layer_time = 10 +cooling = 1 + +[filament:Filatech FilaFlex40] +inherits = *FLEX* +filament_vendor = Filatech +fan_always_on = 1 +filament_max_volumetric_speed = 2.5 +extrusion_multiplier = 1.1 +first_layer_temperature = 230 +first_layer_bed_temperature = 50 +temperature = 230 +bed_temperature = 50 +bridge_fan_speed = 100 +max_fan_speed = 50 +min_fan_speed = 50 +filament_retract_before_travel = 3 +filament_cost = 84.68 +filament_density = 1.22 +filament_retract_length = 2 +filament_retract_speed = 50 +filament_deretract_speed = 25 +filament_retract_lift = 0 +filament_wipe = 0 +disable_fan_first_layers = 4 +full_fan_speed_layer = 6 +min_print_speed = 15 +slowdown_below_layer_time = 10 +cooling = 1 + +[filament:Polymaker PC-Max] +inherits = *ABS* +filament_vendor = Polymaker +filament_cost = 77.3 +filament_density = 1.20 +filament_type = PC +bed_temperature = 115 +filament_colour = #FFF2EC +first_layer_bed_temperature = 100 +first_layer_temperature = 270 +temperature = 270 +bridge_fan_speed = 0 +filament_max_volumetric_speed = 8 + +[filament:PrimaSelect PVA+] +inherits = *PLA* +filament_vendor = PrimaSelect +filament_cost = 122.1 +filament_density = 1.23 +cooling = 0 +fan_always_on = 0 +filament_colour = #FFFFD7 +filament_max_volumetric_speed = 3.8 +filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_soluble = 1 +filament_type = PVA +first_layer_temperature = 195 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 195 + +[filament:Prusa ABS] +inherits = *ABSC* +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.08 +filament_spool_weight = 230 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:*ABS MMU2*] +inherits = Prusa ABS +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_cooling_final_speed = 50 +filament_cooling_initial_speed = 10 +filament_cooling_moves = 5 +filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"; +filament_loading_speed_start = 19 +filament_load_time = 15 +filament_unload_time = 12 +filament_loading_speed = 14 +filament_unloading_speed = 20 + +[filament:Generic ABS @MMU2] +inherits = *ABS MMU2* +filament_vendor = Generic + +[filament:Generic HIPS @MMU2] +inherits = *ABS MMU2* +filament_vendor = Generic +filament_cost = 27.3 +filament_density = 1.04 +fan_always_on = 1 +first_layer_temperature = 230 +first_layer_bed_temperature = 100 +temperature = 230 +bed_temperature = 110 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +bridge_fan_speed = 50 +min_print_speed = 15 +slowdown_below_layer_time = 20 +disable_fan_first_layers = 3 +filament_cooling_final_speed = 2 +filament_cooling_initial_speed = 3 +filament_cooling_moves = 1 +filament_type = HIPS +filament_soluble = 1 +filament_colour = #FFFFD7 +filament_ramming_parameters = "130 120 2.74194 2.96774 3.25806 3.77419 4.83871 6.3871 8.09677 9.64516 10.7419 11.2903| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 7.13871 1.95 10.2806 2.45 11.4194 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" + +[filament:Prusament ASA @MMU2] +inherits = *ABS MMU2* +filament_vendor = Prusa Polymers +filament_cost = 42.69 +filament_density = 1.07 +filament_spool_weight = 201 +fan_always_on = 1 +first_layer_temperature = 260 +first_layer_bed_temperature = 105 +temperature = 260 +bed_temperature = 110 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +bridge_fan_speed = 30 +min_print_speed = 15 +slowdown_below_layer_time = 15 +disable_fan_first_layers = 4 +filament_cooling_final_speed = 2 +filament_cooling_initial_speed = 3 +filament_cooling_moves = 1 +filament_type = ASA +filament_colour = #FFF2EC +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" + +[filament:Prusament PC Blend @MMU2] +inherits = *ABS MMU2* +filament_vendor = Prusa Polymers +filament_cost = 60.49 +filament_density = 1.22 +filament_spool_weight = 201 +fan_always_on = 0 +fan_below_layer_time = 30 +first_layer_temperature = 265 +first_layer_bed_temperature = 105 +temperature = 265 +bed_temperature = 110 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +bridge_fan_speed = 30 +min_print_speed = 15 +slowdown_below_layer_time = 20 +disable_fan_first_layers = 4 +filament_cooling_final_speed = 2 +filament_cooling_initial_speed = 3 +filament_cooling_moves = 1 +filament_max_volumetric_speed = 8 +filament_retract_length = 1 +filament_retract_lift = 0.2 +filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +filament_type = PC +filament_colour = #DEE0E6 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0" + +[filament:Prusa ABS @MMU2] +inherits = *ABS MMU2* +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_spool_weight = 230 + +[filament:Plasty Mladec ABS @MMU2] +inherits = *ABS MMU2* +filament_vendor = Plasty Mladec +filament_density = 1.08 +filament_cost = 27.82 +filament_spool_weight = 230 + +[filament:Prusa HIPS] +inherits = *ABS* +filament_vendor = Made for Prusa +filament_cost = 27.3 +filament_density = 1.04 +filament_spool_weight = 230 +bridge_fan_speed = 50 +cooling = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 10 +filament_colour = #FFFFD7 +filament_soluble = 1 +filament_type = HIPS +first_layer_temperature = 220 +max_fan_speed = 20 +min_fan_speed = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 220 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Generic HIPS] +inherits = *ABS* +filament_vendor = Generic +filament_cost = 27.3 +filament_density = 1.04 +bridge_fan_speed = 50 +cooling = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 10 +filament_colour = #FFFFD7 +filament_soluble = 1 +filament_type = HIPS +first_layer_temperature = 230 +max_fan_speed = 20 +min_fan_speed = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 230 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusa PETG] +inherits = *PET* +renamed_from = "Prusa PET" +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Verbatim PETG] +inherits = *PET* +filament_vendor = Verbatim +filament_cost = 27.90 +filament_density = 1.27 +filament_spool_weight = 235 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Fiberlogy PETG] +inherits = *PET* +filament_vendor = Fiberlogy +filament_cost = 21.50 +filament_density = 1.27 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusament PETG] +inherits = *PET* +filament_vendor = Prusa Polymers +first_layer_temperature = 240 +temperature = 250 +filament_cost = 36.29 +filament_density = 1.27 +filament_spool_weight = 201 +filament_type = PETG +compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusa PETG @0.6 nozzle] +inherits = *PET06* +renamed_from = "Prusa PET 0.6 nozzle"; "Prusa PETG 0.6 nozzle" +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 + +[filament:Prusament PETG @0.6 nozzle] +inherits = *PET06* +filament_vendor = Prusa Polymers +first_layer_temperature = 240 +temperature = 250 +filament_cost = 36.29 +filament_density = 1.27 +filament_spool_weight = 201 +filament_type = PETG + +[filament:Plasty Mladec PETG @0.6 nozzle] +inherits = *PET06* +filament_vendor = Plasty Mladec +first_layer_temperature = 230 +temperature = 240 +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 +filament_type = PETG + +[filament:Devil Design PETG @0.6 nozzle] +inherits = *PET06* +filament_vendor = Devil Design +first_layer_temperature = 230 +first_layer_bed_temperature = 85 +temperature = 230 +bed_temperature = 90 +filament_cost = 20.99 +filament_density = 1.23 +filament_spool_weight = 250 +filament_type = PETG + +[filament:Verbatim PETG @0.6 nozzle] +inherits = *PET06* +filament_vendor = Verbatim +first_layer_temperature = 230 +temperature = 240 +filament_cost = 27.90 +filament_density = 1.27 +filament_spool_weight = 235 +filament_type = PETG + +[filament:Fiberlogy PETG @0.6 nozzle] +inherits = *PET06* +filament_vendor = Fiberlogy +first_layer_temperature = 230 +temperature = 240 +filament_cost = 21.50 +filament_density = 1.27 +filament_type = PETG + +[filament:*PET MMU2*] +inherits = Prusa PETG +compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +temperature = 230 +first_layer_temperature = 230 +filament_cooling_final_speed = 1 +filament_cooling_initial_speed = 2 +filament_cooling_moves = 1 +filament_load_time = 15 +filament_loading_speed = 14 +filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" +filament_unload_time = 12 +filament_unloading_speed = 20 +filament_unloading_speed_start = 120 +filament_loading_speed_start = 19 +filament_retract_length = 1.4 +filament_retract_lift = 0.2 + +[filament:*PET MMU2 06*] +inherits = *PET MMU2* +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 13 + +[filament:Generic PETG @MMU2] +inherits = *PET MMU2* +renamed_from = "Generic PET MMU2"; "Generic PETG MMU2" +filament_vendor = Generic + +[filament:Plasty Mladec PETG @MMU2] +inherits = *PET MMU2* +filament_vendor = Plasty Mladec +filament_spool_weight = 230 + +[filament:Prusa PETG @MMU2] +inherits = *PET MMU2* +renamed_from = "Prusa PET MMU2"; "Prusa PETG MMU2" +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_spool_weight = 230 + +[filament:Prusament PETG @MMU2] +inherits = *PET MMU2* +filament_type = PETG +filament_vendor = Prusa Polymers +filament_cost = 36.29 +filament_density = 1.27 +filament_spool_weight = 201 + +[filament:Generic PETG @MMU2 0.6 nozzle] +inherits = *PET MMU2 06* +renamed_from = "Generic PET MMU2 0.6 nozzle"; "Generic PETG MMU2 0.6 nozzle" +filament_vendor = Generic + +[filament:Prusa PETG @MMU2 0.6 nozzle] +inherits = *PET MMU2 06* +renamed_from = "Prusa PET MMU2 0.6 nozzle"; "Prusa PETG MMU2 0.6 nozzle" +filament_vendor = Made for Prusa +filament_spool_weight = 230 + +[filament:Prusament PETG @MMU2 0.6 nozzle] +inherits = *PET MMU2 06* +filament_type = PETG +filament_vendor = Prusa Polymers +filament_cost = 36.29 +filament_density = 1.27 +filament_spool_weight = 201 + +[filament:Plasty Mladec PETG @MMU2 0.6 nozzle] +inherits = *PET MMU2 06* +filament_type = PETG +filament_vendor = Plasty Mladec +filament_spool_weight = 230 + +[filament:Prusa PLA] +inherits = *PLA* +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.24 +filament_spool_weight = 230 +compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Fiberlogy PLA] +inherits = *PLA* +filament_vendor = Fiberlogy +filament_cost = 25.4 +filament_density = 1.24 + +[filament:Plasty Mladec PLA] +inherits = *PLA* +filament_vendor = Plasty Mladec +filament_cost = 27.82 +filament_density = 1.24 +filament_spool_weight = 230 + +[filament:AmazonBasics PLA] +inherits = *PLA* +filament_vendor = AmazonBasics +filament_cost = 25.4 +filament_density = 1.24 + +[filament:Overture PLA] +inherits = *PLA* +filament_vendor = Overture +filament_cost = 22 +filament_density = 1.24 +filament_spool_weight = 235 + +[filament:Hatchbox PLA] +inherits = *PLA* +filament_vendor = Hatchbox +filament_cost = 25.4 +filament_density = 1.27 +filament_spool_weight = 245 + +[filament:Esun PLA] +inherits = *PLA* +filament_vendor = Esun +filament_cost = 25.4 +filament_density = 1.24 +filament_spool_weight = 265 + +[filament:Das Filament PLA] +inherits = *PLA* +filament_vendor = Das Filament +filament_cost = 25.4 +filament_density = 1.24 + +[filament:EUMAKERS PLA] +inherits = *PLA* +filament_vendor = EUMAKERS +filament_cost = 25.4 +filament_density = 1.24 + +[filament:Floreon3D PLA] +inherits = *PLA* +filament_vendor = Floreon3D +filament_cost = 25.4 +filament_density = 1.24 + +[filament:Prusament PLA] +inherits = *PLA* +filament_vendor = Prusa Polymers +temperature = 215 +filament_cost = 30.24 +filament_density = 1.24 +filament_spool_weight = 201 +filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" +compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusament PVB] +inherits = *PLA* +filament_vendor = Prusa Polymers +temperature = 215 +bed_temperature = 75 +first_layer_bed_temperature = 75 +filament_cost = 60.48 +filament_density = 1.09 +filament_spool_weight = 201 +filament_max_volumetric_speed = 8 +filament_type = PVB +filament_soluble = 1 +filament_colour = #FFFF6F +compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" + +[filament:*PLA MMU2*] +inherits = Prusa PLA +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +temperature = 205 +filament_cooling_final_speed = 2 +filament_cooling_initial_speed = 3 +filament_cooling_moves = 1 +filament_load_time = 15 +filament_loading_speed = 14 +filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +filament_unload_time = 12 +filament_unloading_speed = 20 +filament_loading_speed_start = 19 +filament_minimal_purge_on_wipe_tower = 15 +filament_unloading_speed_start = 100 +full_fan_speed_layer = 4 + +[filament:Generic PLA @MMU2] +inherits = *PLA MMU2* +filament_vendor = Generic + +[filament:Prusa PLA @MMU2] +inherits = *PLA MMU2* +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_spool_weight = 230 + +[filament:Prusament PLA @MMU2] +inherits = *PLA MMU2* +filament_vendor = Prusa Polymers +filament_cost = 30.24 +filament_density = 1.24 +filament_spool_weight = 201 + +[filament:Prusament PVB @MMU2] +inherits = *PLA MMU2* +filament_vendor = Prusa Polymers +filament_cost = 60.48 +filament_density = 1.09 +filament_max_volumetric_speed = 8 +filament_soluble = 1 +filament_type = PVB +filament_colour = #FFFF6F +filament_spool_weight = 201 +slowdown_below_layer_time = 20 +filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" + +[filament:Fillamentum PLA @MMU2] +inherits = *PLA MMU2* +filament_vendor = Fillamentum +filament_cost = 35.48 +filament_density = 1.24 +filament_spool_weight = 230 + +[filament:SemiFlex or Flexfill 98A] +inherits = *FLEX* +filament_vendor = Generic +filament_cost = 82.26 +filament_density = 1.22 +filament_max_volumetric_speed = 1.35 + +[filament:Fillamentum Flexfill 98A] +inherits = *FLEX* +filament_vendor = Fillamentum +filament_cost = 82.26 +filament_density = 1.23 +filament_spool_weight = 230 +filament_max_volumetric_speed = 1.35 +fan_always_on = 1 +cooling = 0 +max_fan_speed = 50 +min_fan_speed = 50 +disable_fan_first_layers = 4 +full_fan_speed_layer = 6 + +[filament:Taulman Bridge] +inherits = *common* +filament_vendor = Taulman +filament_cost = 40 +filament_density = 1.13 +bed_temperature = 90 +bridge_fan_speed = 40 +cooling = 0 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 7 +filament_soluble = 0 +filament_type = NYLON +first_layer_bed_temperature = 60 +first_layer_temperature = 240 +max_fan_speed = 0 +min_fan_speed = 0 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" +temperature = 250 + +[filament:Fillamentum Nylon FX256] +inherits = *common* +filament_vendor = Fillamentum +filament_cost = 56.99 +filament_density = 1.01 +filament_spool_weight = 230 +bed_temperature = 90 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 6 +fan_always_on = 0 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 20 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 6 +filament_soluble = 0 +filament_type = NYLON +first_layer_bed_temperature = 90 +first_layer_temperature = 250 +max_fan_speed = 0 +min_fan_speed = 0 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{elsif nozzle_diameter[0]==0.8};{else}M900 K48{endif} ; Filament gcode LA 1.0" +temperature = 250 + +[filament:Fiberthree F3 PA Pure Pro] +inherits = *common* +filament_vendor = Fiberthree +filament_cost = 200.84 +filament_density = 1.2 +bed_temperature = 70 +first_layer_bed_temperature = 75 +first_layer_temperature = 270 +temperature = 270 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 1 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 10 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 5 +filament_soluble = 0 +filament_type = NYLON +max_fan_speed = 20 +min_fan_speed = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +filament_retract_length = 2 +filament_retract_speed = 40 +filament_retract_lift = nil +filament_retract_before_travel = 1.5 +filament_wipe = 0 +compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Fiberthree F3 PA-CF Pro] +inherits = *common* +filament_vendor = Fiberthree +filament_cost = 208.1 +filament_density = 1.25 +bed_temperature = 70 +first_layer_bed_temperature = 75 +first_layer_temperature = 275 +temperature = 275 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 10 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 5 +filament_soluble = 0 +filament_type = NYLON +max_fan_speed = 0 +min_fan_speed = 0 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +filament_retract_length = 2 +filament_retract_speed = 40 +filament_retract_lift = nil +filament_retract_before_travel = 1.5 +filament_wipe = 0 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Fiberthree F3 PA-GF Pro] +inherits = Fiberthree F3 PA-CF Pro +filament_vendor = Fiberthree +filament_cost = 205.68 +filament_density = 1.27 +fan_always_on = 1 +max_fan_speed = 15 +min_fan_speed = 15 + +[filament:Taulman T-Glase] +inherits = *PET* +filament_vendor = Taulman +filament_cost = 40 +filament_density = 1.27 +bridge_fan_speed = 40 +cooling = 0 +fan_always_on = 0 +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 5 +min_fan_speed = 0 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" + +[filament:Verbatim PLA] +inherits = *PLA* +filament_vendor = Verbatim +filament_cost = 42.99 +filament_density = 1.24 +filament_spool_weight = 235 + +[filament:Verbatim BVOH] +inherits = *common* +filament_vendor = Verbatim +filament_cost = 193.58 +filament_density = 1.14 +filament_spool_weight = 235 +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 0 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #FFFFD7 +filament_max_volumetric_speed = 4 +filament_soluble = 1 +filament_type = PVA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 100 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 210 + +[filament:Verbatim BVOH @MMU2] +inherits = Verbatim BVOH +filament_vendor = Verbatim +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +temperature = 195 +fan_always_on = 1 +first_layer_temperature = 200 +filament_cooling_final_speed = 1 +filament_cooling_initial_speed = 2 +filament_max_volumetric_speed = 4 +filament_type = PVA +filament_cooling_moves = 1 +filament_load_time = 15 +filament_loading_speed = 14 +filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +filament_unload_time = 12 +filament_unloading_speed = 20 +filament_unloading_speed_start = 100 +filament_loading_speed_start = 19 + +[filament:PrimaSelect PVA+ @MMU2] +inherits = *common* +filament_vendor = PrimaSelect +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 0 +disable_fan_first_layers = 1 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #FFFFD7 +filament_cooling_final_speed = 2 +filament_cooling_initial_speed = 4 +filament_cooling_moves = 2 +filament_cost = 122.1 +filament_density = 1.24 +filament_diameter = 1.75 +filament_load_time = 15 +filament_loading_speed = 14 +filament_loading_speed_start = 19 +filament_max_volumetric_speed = 3.8 +filament_minimal_purge_on_wipe_tower = 15 +filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6" +filament_soluble = 1 +filament_toolchange_delay = 0 +filament_type = PVA +filament_unload_time = 12 +filament_unloading_speed = 20 +filament_unloading_speed_start = 100 +first_layer_bed_temperature = 60 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 15 +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" +temperature = 195 + +[filament:Verbatim PP] +inherits = *common* +filament_vendor = Verbatim +filament_cost = 72 +filament_density = 0.89 +filament_spool_weight = 235 +bed_temperature = 100 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 2 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 5 +filament_type = PP +first_layer_bed_temperature = 100 +first_layer_temperature = 220 +max_fan_speed = 100 +min_fan_speed = 100 +start_filament_gcode = "M900 K0 ; Filament gcode" +temperature = 220 + +## Filaments MMU1 + +[filament:ColorFabb HT @MMU1] +inherits = *PETMMU1* +filament_vendor = ColorFabb +bed_temperature = 110 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_cost = 58.66 +filament_density = 1.18 +filament_spool_weight = 236 +first_layer_bed_temperature = 105 +first_layer_temperature = 270 +max_fan_speed = 20 +min_fan_speed = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 270 + +[filament:ColorFabb XT @MMU1] +inherits = *PETMMU1* +filament_vendor = ColorFabb +filament_type = PETG +filament_cost = 62.90 +filament_density = 1.27 +filament_spool_weight = 236 +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +temperature = 270 + +[filament:ColorFabb XT-CF20 @MMU1] +inherits = *PETMMU1* +filament_vendor = ColorFabb +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" +extrusion_multiplier = 1.05 +filament_cost = 80.65 +filament_density = 1.35 +filament_spool_weight = 236 +filament_colour = #804040 +filament_max_volumetric_speed = 2 +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 260 + +[filament:ColorFabb nGen @MMU1] +inherits = *PETMMU1* +filament_vendor = ColorFabb +filament_cost = 21.2 +filament_density = 1.2 +filament_spool_weight = 236 +bridge_fan_speed = 40 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_type = NGEN +first_layer_temperature = 240 +max_fan_speed = 35 +min_fan_speed = 20 + +[filament:E3D Edge @MMU1] +inherits = *PETMMU1* +filament_vendor = E3D +filament_cost = 56.9 +filament_density = 1.26 +filament_type = EDGE + +[filament:Fillamentum CPE @MMU1] +inherits = *PETMMU1* +filament_vendor = Fillamentum +filament_cost = 56.45 +filament_density = 1.25 +filament_spool_weight = 230 +filament_type = CPE +first_layer_bed_temperature = 90 +first_layer_temperature = 275 +max_fan_speed = 50 +min_fan_speed = 50 +disable_fan_first_layers = 3 +full_fan_speed_layer = 5 +temperature = 275 + +[filament:Generic PETG @MMU1] +inherits = *PETMMU1* +renamed_from = "Generic PET MMU1"; "Generic PETG MMU1" +filament_vendor = Generic +filament_cost = 27.82 +filament_density = 1.27 + +[filament:Devil Design PETG @MMU1] +inherits = *PETMMU1* +filament_vendor = Devil Design +filament_cost = 20.99 +filament_density = 1.23 +filament_spool_weight = 250 +first_layer_temperature = 230 +first_layer_bed_temperature = 85 +temperature = 230 +bed_temperature = 90 + +[filament:Plasty Mladec PETG @MMU1] +inherits = *PETMMU1* +filament_vendor = Plasty Mladec +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 + +[filament:Verbatim PETG @MMU1] +inherits = *PETMMU1* +filament_vendor = Verbatim +filament_cost = 27.90 +filament_density = 1.27 +filament_spool_weight = 235 + +[filament:Fiberlogy PETG @MMU1] +inherits = *PETMMU1* +filament_vendor = Fiberlogy +filament_cost = 21.50 +filament_density = 1.27 + +[filament:Prusa PETG @MMU1] +inherits = *PETMMU1* +renamed_from = "Prusa PET MMU1"; "Prusa PETG MMU1" +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 + +[filament:Prusament PETG @MMU1] +inherits = *PETMMU1* +filament_vendor = Prusa Polymers +first_layer_temperature = 240 +temperature = 250 +filament_cost = 36.29 +filament_density = 1.27 +filament_spool_weight = 201 +filament_type = PETG + +[filament:Taulman T-Glase @MMU1] +inherits = *PETMMU1* +filament_vendor = Taulman +filament_cost = 40 +filament_density = 1.27 +bridge_fan_speed = 40 +cooling = 0 +fan_always_on = 0 +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 5 +min_fan_speed = 0 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" + +[filament:Fiberthree F3 PA Pure Pro @MMU1] +inherits = *common* +filament_vendor = Fiberthree +filament_cost = 200.84 +filament_density = 1.2 +bed_temperature = 70 +first_layer_bed_temperature = 75 +first_layer_temperature = 270 +temperature = 270 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 1 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 10 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 4 +filament_soluble = 0 +filament_type = NYLON +max_fan_speed = 20 +min_fan_speed = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = printer_model=="MK2SMM" + +[filament:Fiberthree F3 PA-CF Pro @MMU1] +inherits = *common* +filament_vendor = Fiberthree +filament_cost = 208.1 +filament_density = 1.25 +bed_temperature = 70 +first_layer_bed_temperature = 75 +first_layer_temperature = 275 +temperature = 275 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 10 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 4 +filament_soluble = 0 +filament_type = NYLON +max_fan_speed = 0 +min_fan_speed = 0 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" + +[filament:Fiberthree F3 PA-GF Pro @MMU1] +inherits = Fiberthree F3 PA-CF Pro @MMU1 +filament_vendor = Fiberthree +filament_cost = 205.68 +filament_density = 1.27 +fan_always_on = 1 +max_fan_speed = 15 +min_fan_speed = 15 + +[filament:SemiFlex or Flexfill 98A @MMU1] +inherits = *FLEX* +filament_vendor = Generic +filament_cost = 82.26 +filament_density = 1.22 +filament_max_volumetric_speed = 1.35 +filament_retract_length = nil +filament_retract_speed = nil +filament_retract_lift = nil +compatible_printers_condition = printer_model=="MK2SMM" + +[filament:Generic FLEX @MMU1] +inherits = *FLEX* +filament_vendor = Generic +filament_cost = 82 +filament_density = 1.22 +filament_max_volumetric_speed = 1.2 +filament_retract_length = 0 +filament_retract_speed = nil +filament_retract_lift = nil +compatible_printers_condition = printer_model=="MK2SMM" + +## Filaments MINI + +[filament:Generic PETG @MINI] +inherits = Generic PETG; *PETMINI* +renamed_from = "Generic PET MINI"; "Generic PETG MINI" +filament_vendor = Generic +filament_cost = 27.82 +filament_density = 1.27 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 + +[filament:Devil Design PETG @MINI] +inherits = Generic PETG; *PETMINI* +filament_vendor = Devil Design +filament_cost = 20.99 +filament_density = 1.23 +filament_spool_weight = 250 +first_layer_temperature = 230 +first_layer_bed_temperature = 85 +temperature = 230 +bed_temperature = 90 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 + +[filament:Plasty Mladec PETG @MINI] +inherits = Generic PETG; *PETMINI* +filament_vendor = Plasty Mladec +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 + +[filament:Verbatim PETG @MINI] +inherits = Generic PETG; *PETMINI* +filament_vendor = Verbatim +filament_cost = 27.90 +filament_density = 1.27 +filament_spool_weight = 235 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 + +[filament:Fiberlogy PETG @MINI] +inherits = Generic PETG; *PETMINI* +filament_vendor = Fiberlogy +filament_cost = 21.50 +filament_density = 1.27 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 + +[filament:Generic ABS @MINI] +inherits = Generic ABS; *ABSMINI* +filament_vendor = Generic +filament_cost = 27.82 +filament_density = 1.08 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +bridge_fan_speed = 25 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 + +[filament:Fiberthree F3 PA Pure Pro @MINI] +inherits = *common* +filament_vendor = Fiberthree +filament_cost = 200.84 +filament_density = 1.2 +bed_temperature = 70 +first_layer_bed_temperature = 75 +first_layer_temperature = 270 +temperature = 270 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 1 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 10 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 4 +filament_soluble = 0 +filament_type = NYLON +max_fan_speed = 20 +min_fan_speed = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = printer_model=="MINI" + +[filament:Fiberthree F3 PA-CF Pro @MINI] +inherits = *common* +filament_vendor = Fiberthree +filament_cost = 208.1 +filament_density = 1.25 +bed_temperature = 70 +first_layer_bed_temperature = 75 +first_layer_temperature = 275 +temperature = 275 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 10 +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 4 +filament_soluble = 0 +filament_type = NYLON +max_fan_speed = 0 +min_fan_speed = 0 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" + +[filament:Fiberthree F3 PA-GF Pro @MINI] +inherits = Fiberthree F3 PA-CF Pro @MINI +filament_vendor = Fiberthree +filament_cost = 205.68 +filament_density = 1.27 +fan_always_on = 1 +max_fan_speed = 15 +min_fan_speed = 15 + +[filament:Kimya ABS Carbon @MINI] +inherits = *ABSMINI* +filament_vendor = Kimya +filament_cost = 140.4 +filament_density = 1.032 +filament_colour = #804040 +filament_max_volumetric_speed = 6 +first_layer_temperature = 260 +temperature = 260 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" + +[filament:Kimya ABS Kevlar @MINI] +inherits = Kimya ABS Carbon @MINI +filament_vendor = Kimya +filament_density = 1.037 + +[filament:Esun ABS @MINI] +inherits = Generic ABS; *ABSMINI* +filament_vendor = Esun +filament_cost = 27.82 +filament_density = 1.01 +filament_spool_weight = 265 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +bridge_fan_speed = 25 + +[filament:Hatchbox ABS @MINI] +inherits = Generic ABS; *ABSMINI* +filament_vendor = Hatchbox +filament_cost = 27.82 +filament_density = 1.08 +filament_spool_weight = 245 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +bridge_fan_speed = 25 + +[filament:Plasty Mladec ABS @MINI] +inherits = Generic ABS; *ABSMINI* +filament_vendor = Plasty Mladec +filament_cost = 27.82 +filament_density = 1.08 +filament_spool_weight = 230 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +bridge_fan_speed = 25 + +[filament:Verbatim ABS @MINI] +inherits = Generic ABS; *ABSMINI* +filament_vendor = Verbatim +filament_cost = 25.87 +filament_density = 1.05 +filament_spool_weight = 235 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +bridge_fan_speed = 25 + +[filament:Prusament PETG @MINI] +inherits = Prusament PETG; *PETMINI* +filament_vendor = Prusa Polymers +first_layer_temperature = 240 +temperature = 250 +filament_density = 1.27 +filament_spool_weight = 201 +filament_cost = 36.29 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 + +[filament:Kimya PETG Carbon @MINI] +inherits = *PETMINI* +filament_vendor = Kimya +extrusion_multiplier = 1.05 +filament_cost = 150.02 +filament_density = 1.317 +filament_colour = #804040 +filament_max_volumetric_speed = 6 +first_layer_bed_temperature = 85 +first_layer_temperature = 240 +temperature = 240 +filament_retract_length = nil +filament_retract_lift = 0.3 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" + +[filament:Prusament PETG @0.6 nozzle MINI] +inherits = Prusament PETG; *PETMINI06* +first_layer_temperature = 240 +temperature = 250 +filament_density = 1.27 +filament_spool_weight = 201 +filament_cost = 36.29 + +[filament:Generic PETG @0.6 nozzle MINI] +inherits = Generic PETG; *PETMINI06* +renamed_from = "Generic PET 0.6 nozzle MINI"; "Generic PETG 0.6 nozzle MINI" +filament_cost = 27.82 +filament_density = 1.27 + +[filament:Devil Design PETG @0.6 nozzle MINI] +inherits = Generic PETG; *PETMINI06* +filament_vendor = Devil Design +first_layer_temperature = 230 +first_layer_bed_temperature = 85 +temperature = 230 +bed_temperature = 90 +filament_cost = 20.99 +filament_density = 1.23 +filament_spool_weight = 250 + +[filament:Plasty Mladec PETG @0.6 nozzle MINI] +inherits = Generic PETG; *PETMINI06* +filament_vendor = Plasty Mladec +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 + +[filament:Verbatim PETG @0.6 nozzle MINI] +inherits = Generic PETG; *PETMINI06* +filament_vendor = Verbatim +filament_spool_weight = 235 + +[filament:Fiberlogy PETG @0.6 nozzle MINI] +inherits = Generic PETG; *PETMINI06* +filament_vendor = Fiberlogy + +[filament:Prusament ASA @MINI] +inherits = Prusament ASA; *ABSMINI* +first_layer_temperature = 260 +first_layer_bed_temperature = 100 +temperature = 260 +bed_temperature = 100 +fan_always_on = 1 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +bridge_fan_speed = 30 +min_print_speed = 15 +slowdown_below_layer_time = 15 +disable_fan_first_layers = 4 +filament_type = ASA +filament_colour = #FFF2EC +filament_cost = 42.69 +filament_density = 1.07 +filament_spool_weight = 201 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 + +[filament:Fillamentum Flexfill 98A @MINI] +inherits = SemiFlex or Flexfill 98A; *FLEXMINI* +filament_vendor = Fillamentum +first_layer_temperature = 240 +temperature = 240 +filament_max_volumetric_speed = 1.35 +filament_cost = 82.26 +filament_spool_weight = 230 + +[filament:Generic FLEX @MINI] +inherits = SemiFlex or Flexfill 98A; *FLEXMINI* +filament_vendor = Generic +fan_always_on = 0 +bridge_fan_speed = 80 +first_layer_temperature = 240 +temperature = 240 +filament_retract_length = 3 +filament_max_volumetric_speed = 1.35 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 + + +[filament:AmazonBasics TPU @MINI] +inherits = *FLEXMINI* +filament_vendor = AmazonBasics +filament_max_volumetric_speed = 1.5 +first_layer_temperature = 235 +first_layer_bed_temperature = 50 +temperature = 235 +bed_temperature = 50 +bridge_fan_speed = 100 +max_fan_speed = 80 +min_fan_speed = 80 +filament_retract_before_travel = 5 +filament_cost = 19.99 +filament_density = 1.21 + +[filament:SainSmart TPU @MINI] +inherits = *FLEXMINI* +filament_vendor = SainSmart +filament_max_volumetric_speed = 1.8 +first_layer_temperature = 235 +first_layer_bed_temperature = 50 +temperature = 235 +bed_temperature = 50 +bridge_fan_speed = 100 +max_fan_speed = 80 +min_fan_speed = 80 +filament_retract_before_travel = 5 +min_print_speed = 15 +slowdown_below_layer_time = 10 +cooling = 1 +filament_cost = 32.99 +filament_density = 1.21 + +[filament:Filatech FilaFlex40 @MINI] +inherits = *FLEXMINI* +filament_vendor = Filatech +filament_max_volumetric_speed = 1.8 +fan_always_on = 1 +first_layer_temperature = 240 +first_layer_bed_temperature = 55 +temperature = 240 +bed_temperature = 55 +filament_retract_length = 4 +filament_retract_before_travel = 5 +bridge_fan_speed = 80 +max_fan_speed = 50 +min_fan_speed = 50 +min_print_speed = 15 +slowdown_below_layer_time = 10 +cooling = 1 +filament_cost = 84.68 + +[filament:Fillamentum Flexfill 92A @MINI] +inherits = *FLEXMINI* +filament_vendor = Fillamentum +first_layer_temperature = 245 +temperature = 245 +filament_retract_length = 3 +filament_retract_speed = 40 +filament_deretract_speed = 15 +filament_retract_lift = 0 +filament_retract_before_travel = 7 +filament_wipe = 0 +filament_density = 1.20 +filament_spool_weight = 230 +filament_cost = 33.95 +bridge_fan_speed = 70 +fan_always_on = 1 +cooling = 0 +max_fan_speed = 50 +min_fan_speed = 50 +filament_max_volumetric_speed = 1.2 +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" +disable_fan_first_layers = 4 +extrusion_multiplier = 1.2 +start_filament_gcode = "M900 K0 ; Filament gcode" + +[filament:Fillamentum CPE @MINI] +inherits = Fillamentum CPE; *PETMINI* +first_layer_temperature = 265 +first_layer_bed_temperature = 90 +temperature = 265 +filament_type = CPE +filament_cost = 56.45 +filament_density = 1.25 +filament_spool_weight = 230 +disable_fan_first_layers = 3 +full_fan_speed_layer = 5 + +[filament:ColorFabb nGen @MINI] +inherits = ColorFabb nGen; *PETMINI* +filament_cost = 52.46 +filament_density = 1.2 +filament_spool_weight = 236 + +[filament:E3D PC-ABS @MINI] +inherits = E3D PC-ABS; *ABSMINI* +filament_density = 1.05 +filament_cost = 28.80 + +[filament:Fillamentum ABS @MINI] +inherits = Fillamentum ABS; *ABSMINI* +filament_cost = 32.4 +filament_density = 1.04 +filament_spool_weight = 230 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +bridge_fan_speed = 25 + +[filament:Fillamentum ASA @MINI] +inherits = Fillamentum ASA; *ABSMINI* +first_layer_temperature = 255 +first_layer_bed_temperature = 100 +temperature = 255 +bed_temperature = 100 +fan_always_on = 1 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +min_print_speed = 15 +slowdown_below_layer_time = 15 +disable_fan_first_layers = 4 +filament_type = ASA +filament_colour = #FFF2EC +filament_cost = 38.7 +filament_density = 1.07 +filament_spool_weight = 230 + +[filament:Polymaker PC-Max @MINI] +inherits = Polymaker PC-Max; *ABSMINI* +filament_type = PC +filament_max_volumetric_speed = 7 +bed_temperature = 100 +filament_colour = #FFF2EC +first_layer_bed_temperature = 100 +first_layer_temperature = 270 +temperature = 270 +bridge_fan_speed = 0 +filament_cost = 77.3 +filament_density = 1.20 + +[filament:Prusament PC Blend @MINI] +inherits = *ABSMINI* +filament_vendor = Prusa Polymers +filament_cost = 60.49 +filament_density = 1.22 +filament_spool_weight = 201 +fan_always_on = 0 +first_layer_temperature = 275 +first_layer_bed_temperature = 100 +temperature = 275 +bed_temperature = 100 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 20 +bridge_fan_speed = 30 +min_print_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +filament_type = PC +filament_colour = #DEE0E6 +filament_max_volumetric_speed = 7 +filament_retract_length = nil +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = nil +filament_wipe = nil +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 + +[filament:Prusa ABS @MINI] +inherits = *ABSMINI* +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.08 +filament_spool_weight = 230 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 +bridge_fan_speed = 25 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 + +[filament:Generic HIPS @MINI] +inherits = *ABSMINI* +filament_vendor = Generic +filament_cost = 27.3 +filament_density = 1.04 +bridge_fan_speed = 50 +cooling = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 10 +filament_colour = #FFFFD7 +filament_soluble = 1 +filament_type = HIPS +first_layer_temperature = 230 +max_fan_speed = 20 +min_fan_speed = 20 +temperature = 230 + +[filament:ColorFabb HT @MINI] +inherits = *PETMINI* +filament_vendor = ColorFabb +bed_temperature = 100 +bridge_fan_speed = 30 +cooling = 1 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_cost = 58.66 +filament_density = 1.18 +filament_spool_weight = 236 +first_layer_bed_temperature = 100 +first_layer_temperature = 270 +max_fan_speed = 20 +min_fan_speed = 10 +temperature = 270 + +[filament:ColorFabb XT @MINI] +inherits = *PETMINI* +filament_vendor = ColorFabb +filament_type = PETG +filament_cost = 62.90 +filament_density = 1.27 +filament_spool_weight = 236 +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +temperature = 270 + +[filament:ColorFabb XT-CF20 @MINI] +inherits = *PETMINI* +filament_vendor = ColorFabb +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" +extrusion_multiplier = 1.05 +filament_cost = 80.65 +filament_density = 1.35 +filament_spool_weight = 236 +filament_colour = #804040 +filament_max_volumetric_speed = 2 +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +temperature = 260 + +[filament:Taulman T-Glase @MINI] +inherits = *PETMINI* +filament_vendor = Taulman +filament_cost = 40 +filament_density = 1.27 +bridge_fan_speed = 40 +cooling = 0 +fan_always_on = 0 +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 5 +min_fan_speed = 0 + +[filament:E3D Edge @MINI] +inherits = *PETMINI* +filament_vendor = E3D +filament_cost = 56.9 +filament_density = 1.26 +filament_type = EDGE + +[filament:Prusa PETG @MINI] +inherits = *PETMINI* +renamed_from = "Prusa PET MINI"; "Prusa PETG MINI" +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 + +[filament:Prusa PETG @0.6 nozzle MINI] +inherits = *PETMINI06* +renamed_from = "Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI" +filament_vendor = Made for Prusa +filament_cost = 27.82 +filament_density = 1.27 +filament_spool_weight = 230 + +## Filaments 0.8 nozzle + +[filament:Generic PLA @0.8 nozzle] +inherits = Generic PLA +first_layer_temperature = 220 +temperature = 220 +filament_max_volumetric_speed = 15 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Generic ABS @0.8 nozzle] +inherits = Generic ABS +first_layer_temperature = 265 +temperature = 265 +filament_max_volumetric_speed = 15 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Generic PETG @0.8 nozzle] +inherits = Generic PETG +first_layer_temperature = 240 +temperature = 250 +filament_max_volumetric_speed = 20 +filament_retract_lift = 0.2 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusa PLA @0.8 nozzle] +inherits = Prusa PLA +first_layer_temperature = 220 +temperature = 220 +filament_max_volumetric_speed = 15 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusa PETG @0.8 nozzle] +inherits = Prusa PETG +first_layer_temperature = 240 +temperature = 250 +filament_max_volumetric_speed = 20 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusa ABS @0.8 nozzle] +inherits = Prusa ABS +first_layer_temperature = 265 +temperature = 265 +filament_max_volumetric_speed = 15 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Generic FLEX @0.8 nozzle] +inherits = Generic FLEX +filament_max_volumetric_speed = 4.3 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) + +[filament:Generic HIPS @0.8 nozzle] +inherits = Generic HIPS +first_layer_temperature = 240 +temperature = 240 +filament_max_volumetric_speed = 15 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusament PLA @0.8 nozzle] +inherits = Prusament PLA +first_layer_temperature = 225 +temperature = 225 +filament_max_volumetric_speed = 15 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusament PETG @0.8 nozzle] +inherits = Prusament PETG +first_layer_temperature = 250 +temperature = 260 +filament_max_volumetric_speed = 20 +filament_retract_lift = 0.2 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusament ASA @0.8 nozzle] +inherits = Prusament ASA +first_layer_temperature = 265 +temperature = 265 +filament_max_volumetric_speed = 15 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusament PC Blend @0.8 nozzle] +inherits = Prusament PC Blend +filament_max_volumetric_speed = 13 +filament_retract_lift = 0.25 +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material + +[filament:Prusament PC Blend @0.8 nozzle MK2] +inherits = Prusament PC Blend @MK2 +filament_max_volumetric_speed = 13 +filament_retract_lift = 0.25 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) + +[filament:Prusament PVB @0.8 nozzle] +inherits = Prusament PVB +first_layer_temperature = 225 +temperature = 225 +filament_max_volumetric_speed = 15 +compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +slowdown_below_layer_time = 20 + +## Filaments 0.8 nozzle MMU2 + +[filament:Generic HIPS @MMU2 0.8 nozzle] +inherits = Generic HIPS @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusament ASA @MMU2 0.8 nozzle] +inherits = Prusament ASA @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +slowdown_below_layer_time = 20 +filament_max_volumetric_speed = 14 + +[filament:Prusament PC Blend @MMU2 0.8 nozzle] +inherits = Prusament PC Blend @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 12 + +[filament:Generic PETG @MMU2 0.8 nozzle] +inherits = Generic PETG @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 18 +first_layer_temperature = 240 +temperature = 240 +slowdown_below_layer_time = 20 +filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6" + +[filament:Prusament PETG @MMU2 0.8 nozzle] +inherits = Prusament PETG @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 18 +first_layer_temperature = 240 +temperature = 240 +slowdown_below_layer_time = 20 +filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6" + +[filament:Generic PLA @MMU2 0.8 nozzle] +inherits = Generic PLA @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 14 +first_layer_temperature = 215 +temperature = 210 + +[filament:Prusament PLA @MMU2 0.8 nozzle] +inherits = Prusament PLA @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 14 +first_layer_temperature = 215 +temperature = 210 + +[filament:Verbatim BVOH @MMU2 0.8 nozzle] +inherits = Verbatim BVOH @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 8 + +[filament:PrimaSelect PVA+ @MMU2 0.8 nozzle] +inherits = PrimaSelect PVA+ @MMU2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +filament_max_volumetric_speed = 8 + +## Filaments 0.8 nozzle MINI + +[filament:Generic ABS @0.8 nozzle MINI] +inherits = Generic ABS @MINI +first_layer_temperature = 265 +temperature = 265 +filament_max_volumetric_speed = 13 +filament_retract_length = 3.2 +filament_wipe = nil +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = 2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[filament:Generic PETG @0.8 nozzle MINI] +inherits = Generic PETG @MINI +first_layer_temperature = 240 +temperature = 250 +filament_max_volumetric_speed = 15 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[filament:Prusa PETG @0.8 nozzle MINI] +inherits = Prusa PETG @MINI +first_layer_temperature = 240 +temperature = 250 +filament_max_volumetric_speed = 15 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[filament:Prusa ABS @0.8 nozzle MINI] +inherits = Prusa ABS @MINI +first_layer_temperature = 265 +temperature = 265 +filament_max_volumetric_speed = 13 +slowdown_below_layer_time = 20 +filament_retract_length = 3.2 +filament_wipe = nil +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = 2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[filament:Generic FLEX @0.8 nozzle MINI] +inherits = Generic FLEX @MINI +filament_max_volumetric_speed = 4.3 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[filament:Prusament PETG @0.8 nozzle MINI] +inherits = Prusament PETG @MINI +first_layer_temperature = 245 +temperature = 255 +filament_max_volumetric_speed = 15 +filament_retract_lift = 0.25 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[filament:Prusament ASA @0.8 nozzle MINI] +inherits = Prusament ASA @MINI +first_layer_temperature = 265 +temperature = 265 +filament_max_volumetric_speed = 13 +slowdown_below_layer_time = 20 +filament_retract_length = 3.2 +filament_wipe = nil +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = 2 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[filament:Prusament PC Blend @0.8 nozzle MINI] +inherits = Prusament PC Blend @MINI +filament_max_volumetric_speed = 11 +filament_retract_lift = 0.25 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + +[sla_print:*common*] +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ +layer_height = 0.05 +output_filename_format = [input_filename_base].sl1 +pad_edge_radius = 0.5 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_wall_height = 0 +pad_wall_thickness = 1 +pad_wall_slope = 90 +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_critical_angle = 45 +support_density_at_45 = 250 +support_density_at_horizontal = 500 +support_head_front_diameter = 0.4 +support_head_penetration = 0.4 +support_head_width = 3 +support_max_bridge_length = 10 +support_minimal_z = 0 +support_object_elevation = 5 +support_pillar_diameter = 1 +support_pillar_connection_mode = zigzag +support_pillar_widening_factor = 0 +supports_enable = 1 +support_small_pillar_diameter_percent = 60% + +[sla_print:0.025 UltraDetail] +inherits = *common* +layer_height = 0.025 +support_head_width = 2 + +[sla_print:0.035 Detail] +inherits = *common* +layer_height = 0.035 + +[sla_print:0.05 Normal] +inherits = *common* +layer_height = 0.05 + +[sla_print:0.1 Fast] +inherits = *common* +layer_height = 0.1 +support_head_front_diameter = 0.5 +support_head_penetration = 0.5 +support_pillar_diameter = 1.3 + +########### Materials + +[sla_material:*common 0.05*] +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ +compatible_prints_condition = layer_height == 0.05 +exposure_time = 12 +initial_exposure_time = 45 +initial_layer_height = 0.05 +material_correction = 1,1,1 +material_notes = + +[sla_material:*common 0.025*] +inherits = *common 0.05* +compatible_prints_condition = layer_height == 0.025 +exposure_time = 10 +initial_exposure_time = 35 +initial_layer_height = 0.025 + +[sla_material:*common 0.035*] +inherits = *common 0.05* +compatible_prints_condition = layer_height == 0.035 +exposure_time = 13 +initial_exposure_time = 40 +initial_layer_height = 0.035 + +[sla_material:*common 0.1*] +inherits = *common 0.05* +compatible_prints_condition = layer_height == 0.1 +exposure_time = 20 +initial_exposure_time = 45 +initial_layer_height = 0.1 + +########### Materials 0.025 + +[sla_material:3DM-ABS @0.025] +inherits = *common 0.025* +exposure_time = 12 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-Vulcan Gold @0.025] +inherits = *common 0.025* +exposure_time = 12 +initial_exposure_time = 30 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear 0.025] +inherits = *common 0.025* +exposure_time = 9 +initial_exposure_time = 30 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-HR Red Wine 0.025] +inherits = *common 0.025* +exposure_time = 14 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DM + +[sla_material:BlueCast Phrozen Wax @0.025] +inherits = *common 0.025* +exposure_time = 15 +initial_exposure_time = 50 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast Castable Wax @0.025] +inherits = *common 0.025* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Casting +material_vendor = BlueCast + +[sla_material:BlueCast EcoGray @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 40 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast Kera Master Dental @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 45 +material_type = Dental +material_vendor = BlueCast + +[sla_material:BlueCast Model Dental Gray @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Dental +material_vendor = BlueCast + +[sla_material:BlueCast X10 @0.025] +inherits = *common 0.025* +exposure_time = 4 +initial_exposure_time = 100 +material_type = Tough +material_vendor = BlueCast + +[sla_material:DruckWege Type D High Temp @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 20 +material_type = Tough +material_vendor = DruckWege + +[sla_material:Esun Bio-Photopolymer Resin White @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Esun + +[sla_material:FunToDo Castable Blend Red @0.025] +inherits = *common 0.025* +exposure_time = 10 +initial_exposure_time = 35 +material_type = Casting +material_vendor = FunToDo + +[sla_material:FunToDo Snow White @0.025] +inherits = *common 0.025* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = FunToDo + +[sla_material:Harz Labs Basic Resin Red @0.025] +inherits = *common 0.025* +exposure_time = 10 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Harz Labs + +[sla_material:Harz Labs Model Resin Cherry @0.025] +inherits = *common 0.025* +exposure_time = 10 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Harz Labs + +[sla_material:Harz Labs Model Resin Black @0.025] +inherits = *common 0.025* +exposure_time = 10 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Harz Labs + +[sla_material:Harz Labs Dental Cast Red @0.025] +inherits = *common 0.025* +exposure_time = 10 +initial_exposure_time = 20 +material_type = Dental +material_vendor = Harz Labs + +[sla_material:Esun Standard Resin Black @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Esun + +[sla_material:Photocentric Ash Grey @0.025] +inherits = *common 0.025* +exposure_time = 9 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Photocentric + +[sla_material:Resinworks 3D Violet @0.025] +inherits = *common 0.025* +exposure_time = 15 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Resinworks 3D + +[sla_material:Resinworks 3D Green @0.025] +inherits = *common 0.025* +exposure_time = 17 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Resinworks 3D + +[sla_material:Monocure 3D Black Rapid Resin @0.025] +inherits = *common 0.025* +exposure_time = 4 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Monocure + +[sla_material:Monocure 3D Blue Rapid Resin @0.025] +inherits = *common 0.025* +exposure_time = 4 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Monocure + +## Prusa +[sla_material:Prusa Orange Tough @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.025] +inherits = *common 0.025* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.025] +inherits = *common 0.025* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +## [sla_material:Prusa Blue Tough @0.025] +## inherits = *common 0.025* +## exposure_time = 5 +## initial_exposure_time = 35 +## material_type = Tough +## material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Beige Tough @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.025] +inherits = *common 0.025* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.025] +inherits = *common 0.025* +exposure_time = 6.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Transparent Tough @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 15 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.025] +inherits = *common 0.025* +exposure_time = 12 +initial_exposure_time = 40 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:Prusa Transparent Green Tough @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Clear ABS like @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Super Low Odor Cyan Tough @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Super Low Odor Magenta Tough @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Super Low Odor Yellow Tough @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Orange-Yellow Teeth Model @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Rich Black Tough @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Yellow Jewelry Casting @0.025] +inherits = *common 0.025* +exposure_time = 8 +initial_exposure_time = 45 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:Siraya Tech Simple Clear @0.025] +inherits = *common 0.025* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Blu Clear V2 @0.025] +inherits = *common 0.025* +exposure_time = 9 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Blu Blue @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Fast Grey @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Tenacious @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Easy @0.025] +inherits = *common 0.025* +exposure_time = 11 +initial_exposure_time = 15 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Sculpt @0.025] +inherits = *common 0.025* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Fast Black @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:NextDent Model 2.0 Grey @0.025] +inherits = *common 0.025* +exposure_time = 14 +initial_exposure_time = 35 +material_type = Dental +material_vendor = NextDent + +[sla_material:NextDent Surgical Guide @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Dental +material_vendor = NextDent + +[sla_material:NextDent Cast Purple @0.025] +inherits = *common 0.025* +exposure_time = 7 +initial_exposure_time = 20 +material_type = Casting +material_vendor = NextDent + +[sla_material:MakerJuice Labs Standard Red @0.025] +inherits = *common 0.025* +exposure_time = 9 +initial_exposure_time = 35 +material_type = Tough +material_vendor = MakerJuice Labs + +[sla_material:3DJake High Precision Grey @0.025] +inherits = *common 0.025* +exposure_time = 8.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DJake + +[sla_material:3DJake High Precision Blue @0.025] +inherits = *common 0.025* +exposure_time = 6.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DJake + +[sla_material:Zortrax Black @0.025] +inherits = *common 0.025* +exposure_time = 4 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Zortrax + +########### Materials 0.05 + +[sla_material:Asiga Denta Model @0.05] +inherits = *common 0.05* +exposure_time = 15 +initial_exposure_time = 30 +material_type = Dental +material_vendor = Asiga + +[sla_material:Asiga PlasGRAY @0.05] +inherits = *common 0.05* +exposure_time = 29 +initial_exposure_time = 60 +material_type = Tough +material_vendor = Asiga + +[sla_material:Ameralabs AMD 3 LED @0.05] +inherits = *common 0.05* +exposure_time = 5 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Ameralabs + +[sla_material:BlueCast EcoGray @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast Kera Master Dental @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 50 +material_type = Dental +material_vendor = BlueCast + +[sla_material:BlueCast Model Dental Gray @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Dental +material_vendor = BlueCast + +[sla_material:BlueCast LCD-DLP Original @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 60 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast Phrozen Wax @0.05] +inherits = *common 0.05* +exposure_time = 16 +initial_exposure_time = 50 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast Castable Wax @0.05] +inherits = *common 0.05* +exposure_time = 11 +initial_exposure_time = 35 +material_type = Casting +material_vendor = BlueCast + +[sla_material:BlueCast S+ @0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 45 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast X5 @0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 100 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast X10 @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 100 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast 23LS @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 50 +material_type = Tough +material_vendor = BlueCast + +[sla_material:DruckWege Type D High Temp @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 20 +material_type = Tough +material_vendor = DruckWege + +[sla_material:Monocure 3D Black Rapid Resin @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Monocure + +[sla_material:Monocure 3D Blue Rapid Resin @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Monocure + +[sla_material:Monocure 3D Clear Rapid Resin @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 40 +material_type = Tough +material_vendor = Monocure + +[sla_material:Monocure 3D Grey Rapid Resin @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Monocure + +[sla_material:Monocure 3D White Rapid Resin @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Monocure + +[sla_material:3DM-HTR140 (high temperature) @0.05] +inherits = *common 0.05* +exposure_time = 12 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Monocure + +[sla_material:Esun Bio-Photopolymer Resin White @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Esun + +[sla_material:Esun Standard Resin Black @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Esun + +[sla_material:FunToDo Castable Blend Red @0.05] +inherits = *common 0.05* +exposure_time = 15 +initial_exposure_time = 35 +material_type = Casting +material_vendor = FunToDo + +[sla_material:FunToDo Industrial Blend Unpigmented @0.05] +inherits = *common 0.05* +exposure_time = 4 +initial_exposure_time = 35 +material_type = Tough +material_vendor = FunToDo + +[sla_material:FunToDo Snow White @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 35 +material_type = Tough +material_vendor = FunToDo + +[sla_material:3DM-ABS @0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-BLACK @0.05] +inherits = *common 0.05* +exposure_time = 20 +initial_exposure_time = 40 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-DENT @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 45 +material_type = Dental +material_vendor = 3DM + +[sla_material:3DM-HR Green @0.05] +inherits = *common 0.05* +exposure_time = 15 +initial_exposure_time = 40 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-HR Red Wine @0.05] +inherits = *common 0.05* +exposure_time = 18 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-XPRO White @0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-Vulcan Gold @0.05] +inherits = *common 0.05* +exposure_time = 15 +initial_exposure_time = 30 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear 0.05] +inherits = *common 0.05* +exposure_time = 15 +initial_exposure_time = 30 +material_type = Tough +material_vendor = 3DM + +[sla_material:FunToDo Ash Grey @0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 40 +material_type = Tough +material_vendor = FunToDo + +[sla_material:Harz Labs Model Resin Cherry @0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Harz Labs + +[sla_material:Harz Labs Basic Resin Red @0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Harz Labs + +[sla_material:Harz Labs Model Resin Black @0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 20 +material_type = Tough +material_vendor = Harz Labs + +[sla_material:Harz Labs Dental Cast Red @0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 20 +material_type = Dental +material_vendor = Harz Labs + +[sla_material:Resinworks 3D Violet @0.05] +inherits = *common 0.05* +exposure_time = 17 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Resinworks 3D + +[sla_material:Resinworks 3D Green @0.05] +inherits = *common 0.05* +exposure_time = 21 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Resinworks 3D + +[sla_material:Photocentric Hard Grey @0.05] +inherits = *common 0.05* +exposure_time = 15 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Photocentric + +[sla_material:Photocentric Ash Grey @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Photocentric + +[sla_material:Siraya Tech Simple Clear @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Blu Clear V2 @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Blu Blue @0.05] +inherits = *common 0.05* +exposure_time = 12 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Fast Grey @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Tenacious @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Easy @0.05] +inherits = *common 0.05* +exposure_time = 12 +initial_exposure_time = 15 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Sculpt @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:Siraya Tech Fast Black @0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Siraya Tech + +[sla_material:NextDent Model 2.0 Grey @0.05] +inherits = *common 0.05* +exposure_time = 12 +initial_exposure_time = 35 +material_type = Dental +material_vendor = NextDent + +[sla_material:NextDent Surgical Guide @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Dental +material_vendor = NextDent + +[sla_material:NextDent Cast Purple @0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 20 +material_type = Casting +material_vendor = NextDent + +[sla_material:NextDent Crown Bridge @0.05] +inherits = *common 0.05* +exposure_time = 11 +initial_exposure_time = 35 +material_type = Dental +material_vendor = NextDent + +[sla_material:MakerJuice Labs Standard Red @0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 35 +material_type = Tough +material_vendor = MakerJuice Labs + +[sla_material:3DJake High Precision Grey @0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DJake + +[sla_material:3DJake High Precision Blue @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = 3DJake + +[sla_material:Dragon Resin Metalshine Metal Grey @0.05] +inherits = *common 0.05* +exposure_time = 30 +initial_exposure_time = 50 +material_type = Tough +material_vendor = Dragon Resin + +[sla_material:Dragon Resin Metalshine Dark Brass @0.05] +inherits = *common 0.05* +exposure_time = 30 +initial_exposure_time = 50 +material_type = Tough +material_vendor = Dragon Resin + +[sla_material:Dragon Resin Metalshine Brass @0.05] +inherits = *common 0.05* +exposure_time = 30 +initial_exposure_time = 50 +material_type = Tough +material_vendor = Dragon Resin + +[sla_material:Zortrax Black @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Zortrax + +## Prusa + +[sla_material:Prusa Beige Tough @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Orange Tough @0.05] +inherits = *common 0.05* +exposure_time = 7.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.05] +inherits = *common 0.05* +exposure_time = 8.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +## [sla_material:Prusa Super Low Odor Beige Tough @0.05] +## inherits = *common 0.05* +## exposure_time = 7.5 +## initial_exposure_time = 35 +## material_type = Tough +## material_vendor = Made for Prusa + +## [sla_material:Prusa Super Low Odor White Tough @0.05] +## inherits = *common 0.05* +## exposure_time = 6.5 +## initial_exposure_time = 35 +## material_type = Tough +## material_vendor = Made for Prusa + +## [sla_material:Prusa Super Low Odor Grey Tough @0.05] +## inherits = *common 0.05* +## exposure_time = 6.5 +## initial_exposure_time = 35 +## material_type = Tough +## material_vendor = Made for Prusa + +[sla_material:Prusa Super Low Odor Cyan Tough @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Super Low Odor Magenta Tough @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Super Low Odor Yellow Tough @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +## [sla_material:Prusa Black High Tenacity @0.05] +## inherits = *common 0.05* +## exposure_time = 7 +## initial_exposure_time = 35 +## material_type = Tough +## material_vendor = Made for Prusa + +[sla_material:Prusa Orange-Yellow Teeth Model @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +## [sla_material:Prusa Yellow Solid @0.05] +## inherits = *common 0.05* +## exposure_time = 7 +## initial_exposure_time = 35 + +[sla_material:Prusa White Tough @0.05] +inherits = *common 0.05* +exposure_time = 7.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Transparent Green Tough @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Transparent Red Tough @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.05] +inherits = *common 0.05* +exposure_time = 7.5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +## [sla_material:Prusa Blue Tough @0.05] +## inherits = *common 0.05* +## exposure_time = 8 +## initial_exposure_time = 35 +## material_type = Tough +## material_vendor = Made for Prusa + +[sla_material:Prusa Transparent Tough @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 15 +material_type = Tough +material_vendor = Made for Prusa + +## [sla_material:Prusa Yellow Flexible @0.05] +## inherits = *common 0.05* +## exposure_time = 9 +## initial_exposure_time = 35 + +[sla_material:Prusa Transparent Flexible @0.05] +inherits = *common 0.05* +exposure_time = 5 +initial_exposure_time = 15 +material_type = Flexible +material_vendor = Made for Prusa + +## [sla_material:Prusa White Flexible @0.05] +## inherits = *common 0.05* +## exposure_time = 9 +## initial_exposure_time = 35 + +[sla_material:Prusa Blue Flexible @0.05] +inherits = *common 0.05* +exposure_time = 5 +initial_exposure_time = 15 +material_type = Flexible +material_vendor = Made for Prusa + +## [sla_material:Prusa Black Flexible @0.05] +## inherits = *common 0.05* +## exposure_time = 9 +## initial_exposure_time = 35 + +## [sla_material:Prusa Red Flexible @0.05] +## inherits = *common 0.05* +## exposure_time = 9 +## initial_exposure_time = 35 + +[sla_material:Prusa Clear ABS like @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Yellow Jewelry Casting @0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 30 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Rich Black Tough @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +########### Materials 0.035 + +[sla_material:Prusa Orange Tough @0.035] +inherits = *common 0.035* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +########### Materials 0.1 + +[sla_material:BlueCast EcoGray @0.1] +inherits = *common 0.1* +exposure_time = 10 +initial_exposure_time = 35 +material_type = Tough +material_vendor = BlueCast + +[sla_material:BlueCast Kera Master Dental @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 50 +material_type = Tough +material_vendor = BlueCast + +## Prusa + +[sla_material:Prusa Orange Tough @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Beige Tough @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 55 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Transparent Tough @0.1] +inherits = *common 0.1* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.1] +inherits = *common 0.1* +exposure_time = 15 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:Prusa Transparent Green Tough @0.1] +inherits = *common 0.1* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.1] +inherits = *common 0.1* +exposure_time = 8 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Made for Prusa + +[printer:*common*] +printer_technology = FFF +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 0 +end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors +extruder_offset = 0x0 +gcode_flavor = marlin +silent_mode = 0 +remaining_times = 1 +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 2000 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25 +min_layer_height = 0.07 +max_print_height = 200 +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_host = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n +printer_settings_id = +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 4 +retract_lift = 0.4 +retract_lift_above = 0 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 +printer_model = MK2S +printer_variant = 0.4 +default_print_profile = 0.15mm OPTIMAL +default_filament_profile = Prusament PLA + +[printer:*multimaterial*] +inherits = *common* +deretract_speed = 50 +retract_before_travel = 3 +retract_before_wipe = 60% +retract_layer_change = 0 +retract_length = 4 +retract_lift = 0.6 +retract_lift_above = 0 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 80 +parking_pos_retraction = 92 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +single_extruder_multi_material = 1 +variable_layer_height = 1 +printer_model = MK2SMM + +[printer:*mm-single*] +inherits = *multimaterial* +end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n\n +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0 +default_print_profile = 0.15mm OPTIMAL + +[printer:*mm-multi*] +inherits = *multimaterial* +high_current_on_filament_swap = 1 +end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors +extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259 +nozzle_diameter = 0.4,0.4,0.4,0.4 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0 +default_print_profile = 0.15mm OPTIMAL + +# XXXXXXXXXXXXXXXXX +# XXX--- MK2 ---XXX +# XXXXXXXXXXXXXXXXX + +[printer:Original Prusa i3 MK2S] +inherits = *common* + +[printer:Original Prusa i3 MK2S 0.25 nozzle] +inherits = *common* +max_layer_height = 0.15 +min_layer_height = 0.05 +nozzle_diameter = 0.25 +retract_length = 1 +retract_speed = 50 +variable_layer_height = 1 +printer_variant = 0.25 +retract_lift = 0.15 +default_print_profile = 0.10mm DETAIL 0.25 nozzle + +[printer:Original Prusa i3 MK2S 0.6 nozzle] +inherits = *common* +max_layer_height = 0.35 +min_layer_height = 0.1 +nozzle_diameter = 0.6 +printer_variant = 0.6 +default_print_profile = 0.20mm NORMAL @0.6 nozzle + +# XXXXXXXXXXXXXXXXXXX +# XXX--- MK2MM ---XXX +# XXXXXXXXXXXXXXXXXXX + +[printer:Original Prusa i3 MK2S MMU1 Single] +inherits = *mm-single* +max_layer_height = 0.25 +min_layer_height = 0.07 + +[printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle] +inherits = *mm-single* +nozzle_diameter = 0.6 +printer_variant = 0.6 +default_print_profile = 0.20mm NORMAL @0.6 nozzle +max_layer_height = 0.35 +min_layer_height = 0.1 + +[printer:Original Prusa i3 MK2S MMU1] +inherits = *mm-multi* +nozzle_diameter = 0.4,0.4,0.4,0.4 +max_layer_height = 0.25 +min_layer_height = 0.07 + +[printer:Original Prusa i3 MK2S MMU1 0.6 nozzle] +inherits = *mm-multi* +nozzle_diameter = 0.6,0.6,0.6,0.6 +printer_variant = 0.6 +default_print_profile = 0.20mm NORMAL @0.6 nozzle +max_layer_height = 0.35 +min_layer_height = 0.1 + +# XXXXXXXXXXXXXXXXXXX +# XXX--- MK2.5 ---XXX +# XXXXXXXXXXXXXXXXXXX + +[printer:Original Prusa i3 MK2.5] +inherits = Original Prusa i3 MK2S +printer_model = MK2.5 +remaining_times = 1 +machine_max_jerk_e = 4.5 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5 0.25 nozzle] +inherits = Original Prusa i3 MK2S 0.25 nozzle +printer_model = MK2.5 +remaining_times = 1 +machine_max_jerk_e = 4.5 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5 0.6 nozzle] +inherits = Original Prusa i3 MK2S 0.6 nozzle +printer_model = MK2.5 +remaining_times = 1 +machine_max_jerk_e = 4.5 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5 0.8 nozzle] +inherits = Original Prusa i3 MK2S 0.6 nozzle +printer_model = MK2.5 +nozzle_diameter = 0.8 +printer_variant = 0.8 +max_layer_height = 0.6 +min_layer_height = 0.2 +retract_length = 1 +remaining_times = 1 +machine_max_jerk_e = 4.5 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +default_print_profile = 0.40mm QUALITY @0.8 nozzle +default_filament_profile = Prusament PLA @0.8 nozzle + +[printer:Original Prusa i3 MK2.5 MMU2 Single] +inherits = Original Prusa i3 MK2.5; *mm2* +printer_model = MK2.5MMU2 +single_extruder_multi_material = 0 +max_print_height = 200 +remaining_times = 1 +silent_mode = 0 +retract_lift_below = 199 +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 2000 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 4.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +default_print_profile = 0.15mm OPTIMAL @MK2.5 +default_filament_profile = Prusament PLA +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors + +[printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle +printer_model = MK2.5MMU2 + +[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle +printer_model = MK2.5MMU2 + +[printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle +printer_model = MK2.5MMU2 + +[printer:Original Prusa i3 MK2.5 MMU2] +inherits = Original Prusa i3 MK2.5; *mm2* +printer_model = MK2.5MMU2 +max_print_height = 200 +remaining_times = 1 +silent_mode = 0 +retract_lift_below = 199 +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 2000 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 4.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +default_print_profile = 0.15mm OPTIMAL @MK2.5 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n +single_extruder_multi_material = 1 +# The 5x nozzle diameter defines the number of extruders. Other extruder parameters +# (for example the retract values) are duplicaed from the first value, so they do not need +# to be defined explicitely. +nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 +extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n + +[printer:Original Prusa i3 MK2.5S] +inherits = Original Prusa i3 MK2.5 +printer_model = MK2.5S +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5S 0.25 nozzle] +inherits = Original Prusa i3 MK2.5 0.25 nozzle +printer_model = MK2.5S +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5S 0.6 nozzle] +inherits = Original Prusa i3 MK2.5 0.6 nozzle +printer_model = MK2.5S +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5S 0.8 nozzle] +inherits = Original Prusa i3 MK2.5 0.8 nozzle +printer_model = MK2.5S + +[printer:Original Prusa i3 MK2.5S MMU2S Single] +inherits = Original Prusa i3 MK2.5; *mm2s* +printer_model = MK2.5SMMU2S +single_extruder_multi_material = 0 +max_print_height = 200 +remaining_times = 1 +silent_mode = 0 +retract_lift_below = 199 +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 2000 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 4.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +default_print_profile = 0.15mm OPTIMAL @MK2.5 +default_filament_profile = Prusament PLA +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors + +[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S Single +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n +max_layer_height = 0.6 +min_layer_height = 0.2 +nozzle_diameter = 0.8 +printer_variant = 0.8 +retract_length = 1 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +default_print_profile = 0.40mm QUALITY @0.8 nozzle +default_filament_profile = Prusament PLA @0.8 nozzle + +[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S Single +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n +max_layer_height = 0.35 +min_layer_height = 0.1 +nozzle_diameter = 0.6 +printer_variant = 0.6 +default_print_profile = 0.20mm NORMAL @0.6 nozzle + +[printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S Single +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n +max_layer_height = 0.15 +min_layer_height = 0.05 +nozzle_diameter = 0.25 +printer_variant = 0.25 +retract_lift = 0.15 +default_print_profile = 0.10mm DETAIL 0.25 nozzle +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n + +[printer:Original Prusa i3 MK2.5S MMU2S] +inherits = Original Prusa i3 MK2.5; *mm2s* +printer_model = MK2.5SMMU2S +max_print_height = 200 +remaining_times = 1 +silent_mode = 0 +retract_lift_below = 199 +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 2000 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 500 +machine_max_feedrate_e = 120 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 4.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +default_print_profile = 0.15mm OPTIMAL @MK2.5 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n +single_extruder_multi_material = 1 +# The 5x nozzle diameter defines the number of extruders. Other extruder parameters +# (for example the retract values) are duplicaed from the first value, so they do not need +# to be defined explicitely. +nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 +extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n + +[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S +nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +printer_variant = 0.6 +default_print_profile = 0.20mm NORMAL @0.6 nozzle + +[printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle] +inherits = Original Prusa i3 MK2.5 MMU2 +nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +printer_variant = 0.6 +default_print_profile = 0.20mm NORMAL @0.6 nozzle + +## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. + +## [printer:Original Prusa i3 MK2.5S MMU2S 0.8 nozzle] +## inherits = Original Prusa i3 MK2.5S MMU2S +## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 +## max_layer_height = 0.6 +## min_layer_height = 0.2 +## printer_variant = 0.8 +## retract_length = 1 +## default_print_profile = 0.40mm QUALITY @0.8 nozzle +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n + +## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle] +## inherits = Original Prusa i3 MK2.5 MMU2 +## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 +## max_layer_height = 0.6 +## min_layer_height = 0.2 +## printer_variant = 0.8 +## retract_length = 1 +## default_print_profile = 0.40mm QUALITY @0.8 nozzle +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n + +# XXXXXXXXXXXXXXXXX +# XXX--- MK3 ---XXX +# XXXXXXXXXXXXXXXXX + +[printer:Original Prusa i3 MK3] +inherits = *common* +end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors +machine_max_acceleration_e = 5000,5000 +machine_max_acceleration_extruding = 1250,1250 +machine_max_acceleration_retracting = 1250,1250 +machine_max_acceleration_x = 1000,960 +machine_max_acceleration_y = 1000,960 +machine_max_acceleration_z = 200,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 200,100 +machine_max_feedrate_y = 200,100 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 4.5,4.5 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +silent_mode = 1 +remaining_times = 1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +retract_lift_below = 209 +max_print_height = 210 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +printer_model = MK3 +default_print_profile = 0.15mm QUALITY @MK3 + +[printer:Original Prusa i3 MK3 0.25 nozzle] +inherits = Original Prusa i3 MK3 +nozzle_diameter = 0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +printer_variant = 0.25 +retract_lift = 0.15 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 + +[printer:Original Prusa i3 MK3 0.6 nozzle] +inherits = Original Prusa i3 MK3 +nozzle_diameter = 0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +printer_variant = 0.6 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 + +[printer:Original Prusa i3 MK3 0.8 nozzle] +inherits = Original Prusa i3 MK3 +nozzle_diameter = 0.8 +max_layer_height = 0.6 +min_layer_height = 0.2 +printer_variant = 0.8 +retract_length = 1 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} +default_print_profile = 0.40mm QUALITY @0.8 nozzle +default_filament_profile = Prusament PLA @0.8 nozzle + +[printer:Original Prusa i3 MK3S & MK3S+] +inherits = Original Prusa i3 MK3 +renamed_from = "Original Prusa i3 MK3S" +printer_model = MK3S +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} + +[printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle] +inherits = Original Prusa i3 MK3 0.25 nozzle +renamed_from = "Original Prusa i3 MK3S 0.25 nozzle" +printer_model = MK3S +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} + +[printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle] +inherits = Original Prusa i3 MK3 0.6 nozzle +renamed_from = "Original Prusa i3 MK3S 0.6 nozzle" +printer_model = MK3S + +[printer:Original Prusa i3 MK3S & MK3S+ 0.8 nozzle] +inherits = Original Prusa i3 MK3 0.8 nozzle +printer_model = MK3S + +[printer:*mm2*] +inherits = Original Prusa i3 MK3 +single_extruder_multi_material = 1 +cooling_tube_length = 10 +cooling_tube_retraction = 30 +parking_pos_retraction = 85 +retract_length_toolchange = 3 +extra_loading_move = -13 +printer_model = MK3MMU2 +default_print_profile = 0.15mm QUALITY @MK3 +default_filament_profile = Prusament PLA @MMU2 + +[printer:*mm2s*] +inherits = Original Prusa i3 MK3 +single_extruder_multi_material = 1 +cooling_tube_length = 20 +cooling_tube_retraction = 40 +parking_pos_retraction = 85 +retract_length_toolchange = 3 +extra_loading_move = -25 +printer_model = MK3SMMU2S +default_print_profile = 0.15mm QUALITY @MK3 +default_filament_profile = Prusament PLA @MMU2 + +[printer:Original Prusa i3 MK3 MMU2 Single] +inherits = *mm2* +single_extruder_multi_material = 0 +default_filament_profile = Prusament PLA +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors + +[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle] +inherits = Original Prusa i3 MK3 MMU2 Single +single_extruder_multi_material = 0 +nozzle_diameter = 0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +printer_variant = 0.6 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 + +[printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle] +inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle +single_extruder_multi_material = 0 +nozzle_diameter = 0.8 +max_layer_height = 0.6 +min_layer_height = 0.2 +printer_variant = 0.8 +retract_length = 1 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +default_print_profile = 0.40mm QUALITY @0.8 nozzle +default_filament_profile = Prusament PLA @0.8 nozzle + +[printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle] +inherits = Original Prusa i3 MK3 MMU2 Single +single_extruder_multi_material = 0 +nozzle_diameter = 0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +printer_variant = 0.25 +retract_lift = 0.15 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 + +[printer:Original Prusa i3 MK3 MMU2] +inherits = *mm2* +# The 5x nozzle diameter defines the number of extruders. Other extruder parameters +# (for example the retract values) are duplicaed from the first value, so they do not need +# to be defined explicitely. +machine_max_acceleration_e = 8000,8000 +nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 +extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n + +[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single] +inherits = *mm2s* +renamed_from = "Original Prusa i3 MK3S MMU2S Single" +single_extruder_multi_material = 0 +default_filament_profile = Prusament PLA +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors + +[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle] +inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single +renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.6 nozzle" +single_extruder_multi_material = 0 +nozzle_diameter = 0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +printer_variant = 0.6 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 + +[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle] +inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle +single_extruder_multi_material = 0 +nozzle_diameter = 0.8 +max_layer_height = 0.6 +min_layer_height = 0.2 +printer_variant = 0.8 +retract_length = 1 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +default_print_profile = 0.40mm QUALITY @0.8 nozzle +default_filament_profile = Prusament PLA @0.8 nozzle + +[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle] +inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single +renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.25 nozzle" +single_extruder_multi_material = 0 +nozzle_diameter = 0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +printer_variant = 0.25 +retract_lift = 0.15 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 + +[printer:Original Prusa i3 MK3S & MK3S+ MMU2S] +inherits = *mm2s* +renamed_from = "Original Prusa i3 MK3S MMU2S" +machine_max_acceleration_e = 8000,8000 +nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 +extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n + +## 0.6mm nozzle MMU2/S printer profiles + +[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle] +inherits = Original Prusa i3 MK3S & MK3S+ MMU2S +renamed_from = "Original Prusa i3 MK3S MMU2S 0.6 nozzle" +nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +printer_variant = 0.6 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 + +[printer:Original Prusa i3 MK3 MMU2 0.6 nozzle] +inherits = Original Prusa i3 MK3 MMU2 +nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +printer_variant = 0.6 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 + +## 0.8mm nozzle MMU2/S printer profiles + +## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. + +## [printer:Original Prusa i3 MK3 MMU2 0.8 nozzle] +## inherits = Original Prusa i3 MK3 MMU2 +## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 +## max_layer_height = 0.6 +## min_layer_height = 0.2 +## printer_variant = 0.8 +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +## default_print_profile = 0.40mm QUALITY @0.8 nozzle + +## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle] +## inherits = Original Prusa i3 MK3S & MK3S+ MMU2S +## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 +## max_layer_height = 0.6 +## min_layer_height = 0.2 +## printer_variant = 0.8 +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +## default_print_profile = 0.40mm QUALITY @0.8 nozzle + +## MINI + +[printer:Original Prusa MINI & MINI+] +inherits = *common* +renamed_from = "Original Prusa MINI" +printer_model = MINI +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +thumbnails = 16x16,220x124 +bed_shape = 0x0,180x0,180x180,0x180 +default_filament_profile = "Prusament PLA" +default_print_profile = 0.15mm QUALITY @MINI +gcode_flavor = marlin +machine_max_acceleration_e = 5000 +machine_max_acceleration_extruding = 1250 +machine_max_acceleration_retracting = 1250 +machine_max_acceleration_x = 1250 +machine_max_acceleration_y = 1250 +machine_max_acceleration_z = 400 +machine_max_feedrate_e = 80 +machine_max_feedrate_x = 180 +machine_max_feedrate_y = 180 +machine_max_feedrate_z = 12 +machine_max_jerk_e = 10 +machine_max_jerk_x = 8 +machine_max_jerk_y = 8 +machine_max_jerk_z = 2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_layer_height = 0.25 +max_print_height = 180 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +retract_length = 3.2 +retract_lift = 0.2 +retract_speed = 70 +deretract_speed = 40 +wipe = 1 +retract_before_wipe = 70% +retract_before_travel = 1.5 +retract_lift_above = 0 +retract_lift_below = 179 +retract_layer_change = 1 +silent_mode = 0 +remaining_times = 1 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow +end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n +extruder_colour = + +[printer:Original Prusa MINI & MINI+ 0.25 nozzle] +inherits = Original Prusa MINI & MINI+ +renamed_from = "Original Prusa MINI 0.25 nozzle" +printer_variant = 0.25 +nozzle_diameter = 0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI +retract_length = 3 +retract_lift = 0.15 +retract_before_travel = 1 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow + +[printer:Original Prusa MINI & MINI+ 0.6 nozzle] +inherits = Original Prusa MINI & MINI+ +renamed_from = "Original Prusa MINI 0.6 nozzle" +printer_variant = 0.6 +nozzle_diameter = 0.6 +max_layer_height = 0.40 +min_layer_height = 0.15 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI +retract_length = 3.5 +retract_before_travel = 1.5 + +[printer:Original Prusa MINI & MINI+ 0.8 nozzle] +inherits = Original Prusa MINI & MINI+ +printer_variant = 0.8 +nozzle_diameter = 0.8 +max_layer_height = 0.55 +min_layer_height = 0.2 +default_print_profile = 0.40mm QUALITY @0.8 nozzle MINI +default_filament_profile = Prusament PLA @0.8 nozzle +retract_length = 3.5 +retract_before_travel = 1.5 + +[printer:Original Prusa SL1] +printer_technology = SLA +printer_model = SL1 +printer_variant = default +default_sla_material_profile = Prusa Orange Tough @0.05 +default_sla_print_profile = 0.05 Normal +thumbnails = 400x400,800x480 +bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02 +display_height = 68.04 +display_orientation = portrait +display_pixels_x = 2560 +display_pixels_y = 1440 +display_width = 120.96 +max_print_height = 150 +min_exposure_time = 1 +max_exposure_time = 120 +min_initial_exposure_time = 1 +max_initial_exposure_time = 300 +printer_correction = 1,1,1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n + +# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer. +[obsolete_presets] +print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2" +filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm" diff --git a/PrusaSlicer/vendor/PrusaResearch.ini b/PrusaSlicer/vendor/PrusaResearch.ini index 796d578..02971b6 100644 --- a/PrusaSlicer/vendor/PrusaResearch.ini +++ b/PrusaSlicer/vendor/PrusaResearch.ini @@ -5,7 +5,7 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 1.2.4 +config_version = 1.3.3 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% @@ -24,7 +24,7 @@ technology = FFF family = MINI bed_model = mini_bed.stl bed_texture = mini.svg -default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PVB +default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PC Blend Carbon Fiber @MINI; Prusament PVB [printer_model:MK3S] name = Original Prusa i3 MK3S && MK3S+ @@ -33,7 +33,7 @@ technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK3] name = Original Prusa i3 MK3 @@ -42,7 +42,7 @@ technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK3SMMU2S] name = Original Prusa i3 MK3S && MK3S+ MMU2S @@ -51,7 +51,7 @@ technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK3MMU2] name = Original Prusa i3 MK3 MMU2 @@ -60,7 +60,7 @@ technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK2.5S] name = Original Prusa i3 MK2.5S @@ -69,7 +69,7 @@ technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK2.5] name = Original Prusa i3 MK2.5 @@ -78,7 +78,7 @@ technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK2.5SMMU2S] name = Original Prusa i3 MK2.5S MMU2S @@ -87,7 +87,7 @@ technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK2.5MMU2] name = Original Prusa i3 MK2.5 MMU2 @@ -96,7 +96,7 @@ technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2 +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK2S] name = Original Prusa i3 MK2S @@ -105,7 +105,7 @@ technology = FFF family = MK2 bed_model = mk2_bed.stl bed_texture = mk2.svg -default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB +default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend @MK2; Prusament PC Blend Carbon Fiber @MK2; Prusament PVB [printer_model:MK2SMM] name = Original Prusa i3 MK2S MMU1 @@ -114,7 +114,7 @@ technology = FFF family = MK2 bed_model = mk2_bed.stl bed_texture = mk2.svg -default_materials = Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend; Prusament PVB +default_materials = Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend @MK2; Prusament PC Blend Carbon Fiber @MK2; Prusament PVB [printer_model:SL1] name = Original Prusa SL1 @@ -123,7 +123,16 @@ technology = SLA family = SL1 bed_model = sl1_bed.stl bed_texture = sl1.svg -default_materials = Prusa Orange Tough @0.05 +default_materials = Prusa Orange Tough @0.05; Prusament Resin Tough Prusa Orange @0.05 + +[printer_model:SL1S] +name = Original Prusa SL1S SPEED +variants = default +technology = SLA +family = SL1 +bed_model = sl1s_bed.stl +bed_texture = sl1s.svg +default_materials = Prusa Orange Tough @0.05 SL1S; Prusament Resin Tough Prusa Orange @0.05 SL1S # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. @@ -419,7 +428,7 @@ infill_speed = 30 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 30 -support_material_extrusion_width = 0.3 +support_material_extrusion_width = 0.33 support_material_spacing = 1.5 layer_height = 0.05 perimeter_acceleration = 300 @@ -481,7 +490,7 @@ infill_speed = 40 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 40 -support_material_extrusion_width = 0.3 +support_material_extrusion_width = 0.33 support_material_spacing = 1.5 layer_height = 0.07 perimeter_acceleration = 300 @@ -589,8 +598,9 @@ top_infill_extrusion_width = 0.4 top_solid_layers = 7 # MK2 # -[print:0.15mm 100mms Linear Advance] +[print:0.15mm 100mms] inherits = *0.15mm* +renamed_from = "0.15mm 100mms Linear Advance" bridge_flow_ratio = 0.95 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 @@ -735,8 +745,9 @@ top_infill_extrusion_width = 0.4 top_solid_layers = 5 # MK2 # -[print:0.20mm 100mms Linear Advance] +[print:0.20mm 100mms] inherits = *0.20mm* +renamed_from = "0.20mm 100mms Linear Advance" compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 infill_speed = 100 @@ -954,8 +965,9 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and first_layer_extrusion_width = 0.42 perimeter_extrusion_width = 0.43 solid_infill_extrusion_width = 0.7 -top_infill_extrusion_width = 0.43 +top_infill_extrusion_width = 0.45 support_material_extrusion_width = 0.37 +top_solid_infill_speed = 40 # MK2 # [print:0.35mm FAST @0.6 nozzle] @@ -1043,8 +1055,9 @@ solid_infill_extrusion_width = 0.68 # XXXXXXXXXXXXXXXXXXXXXX # MK2.5 # -[print:0.15mm 100mms Linear Advance @MK2.5] -inherits = 0.15mm 100mms Linear Advance +[print:0.15mm 100mms @MK2.5] +inherits = 0.15mm 100mms +renamed_from = "0.15mm 100mms Linear Advance @MK2.5" compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 @@ -1075,8 +1088,9 @@ support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 # MK2.5 # -[print:0.20mm 100mms Linear Advance @MK2.5] -inherits = 0.20mm 100mms Linear Advance +[print:0.20mm 100mms @MK2.5] +inherits = 0.20mm 100mms +renamed_from = "0.20mm 100mms Linear Advance @MK2.5" compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 @@ -1194,6 +1208,7 @@ perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% support_material_speed = 30 +support_material_extrusion_width = 0.35 [print:0.07mm ULTRADETAIL @MINI] inherits = *0.07mm*; *MINI* @@ -1205,6 +1220,7 @@ small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% +support_material_extrusion_width = 0.35 [print:0.10mm DETAIL @MINI] inherits = *0.10mm*; *MINI* @@ -1490,7 +1506,7 @@ max_fan_speed = 50 min_fan_speed = 30 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" temperature = 240 -filament_retract_length = 1.4 +filament_retract_length = 1 filament_retract_lift = 0.2 compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) @@ -1861,8 +1877,8 @@ min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 -first_layer_temperature = 265 -temperature = 265 +first_layer_temperature = 260 +temperature = 260 filament_type = ASA [filament:Prusament ASA] @@ -1891,7 +1907,7 @@ compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI [filament:Prusament PC Blend] inherits = *ABS* filament_vendor = Prusa Polymers -filament_cost = 60.49 +filament_cost = 62.36 filament_density = 1.22 filament_spool_weight = 201 fan_always_on = 0 @@ -1910,44 +1926,38 @@ fan_below_layer_time = 30 filament_type = PC filament_colour = #DEE0E6 filament_max_volumetric_speed = 8 -filament_retract_length = 1 filament_retract_lift = 0.2 compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Prusament PC Blend @MK2] -inherits = *ABS* -filament_vendor = Prusa Polymers -filament_cost = 60.49 -filament_density = 1.22 -filament_spool_weight = 201 -fan_always_on = 0 -first_layer_temperature = 275 +inherits = Prusament PC Blend first_layer_bed_temperature = 105 -temperature = 275 bed_temperature = 110 -cooling = 1 -min_fan_speed = 20 -max_fan_speed = 20 -min_print_speed = 15 -bridge_fan_speed = 30 -slowdown_below_layer_time = 20 disable_fan_first_layers = 6 -fan_below_layer_time = 30 -filament_type = PC -filament_colour = #DEE0E6 -filament_max_volumetric_speed = 8 -filament_retract_length = 1 -filament_retract_lift = 0.2 -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" +compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) -[filament:Prusament PC Blend @MK2MMU1] -inherits = Prusament PC Blend @MK2 +[filament:Prusament PC Blend Carbon Fiber] +inherits = Prusament PC Blend +filament_cost = 90.73 +filament_density = 1.16 +extrusion_multiplier = 1.04 +first_layer_temperature = 285 +temperature = 285 +disable_fan_first_layers = 4 +fan_below_layer_time = 10 +filament_colour = #BBBBBB filament_retract_length = nil -filament_retract_lift = 0.2 -compatible_printers_condition = printer_model=="MK2SMM" -start_filament_gcode = "M900 K200 ; Filament gcode LA 1.0" +filament_retract_lift = nil +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material + +[filament:Prusament PC Blend Carbon Fiber @MK2] +inherits = Prusament PC Blend Carbon Fiber +first_layer_bed_temperature = 105 +bed_temperature = 110 +disable_fan_first_layers = 6 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Fillamentum CPE] inherits = *PET* @@ -1958,8 +1968,8 @@ filament_spool_weight = 230 filament_type = CPE first_layer_bed_temperature = 90 first_layer_temperature = 275 +min_fan_speed = 30 max_fan_speed = 50 -min_fan_speed = 50 disable_fan_first_layers = 3 full_fan_speed_layer = 5 temperature = 275 @@ -2038,6 +2048,472 @@ filament_cost = 27.82 filament_density = 1.27 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +[filament:Extrudr DuraPro ASA] +inherits = Fillamentum ASA +filament_vendor = Extrudr +bed_temperature = 90 +filament_cost = 25.98 +filament_density = 1.05 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120" +first_layer_bed_temperature = 90 +first_layer_temperature = 220 +temperature = 220 +filament_max_volumetric_speed = 10 +compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +filament_spool_weight = 230 + +[filament:Extrudr PETG] +inherits = *PET* +filament_vendor = Extrudr +bed_temperature = 70 +filament_cost = 35.45 +filament_density = 1.29 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=94" +first_layer_bed_temperature = 70 +first_layer_temperature = 220 +temperature = 220 +slowdown_below_layer_time = 20 +filament_retract_length = nil +filament_retract_lift = nil +filament_spool_weight = 262 +full_fan_speed_layer = 0 +compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Extrudr PETG @MINI] +inherits = Extrudr PETG +filament_vendor = Extrudr +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +compatible_printers_condition = printer_model=="MINI" + +[filament:Extrudr XPETG CF] +inherits = Extrudr PETG +filament_cost = 49.99 +filament_density = 1.41 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198" +first_layer_temperature = 235 +temperature = 235 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +filament_spool_weight = 230 + +[filament:Extrudr XPETG CF @MINI] +inherits = Extrudr XPETG CF +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" + +[filament:Extrudr XPETG Matt] +inherits = Extrudr PETG +filament_cost = 29.99 +filament_density = 1.41 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=199" +first_layer_temperature = 230 +temperature = 230 + +[filament:Extrudr XPETG Matt @MINI] +inherits = Extrudr XPETG Matt +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +compatible_printers_condition = printer_model=="MINI" + +[filament:Extrudr BioFusion] +inherits = *PLA* +filament_vendor = Extrudr +disable_fan_first_layers = 3 +full_fan_speed_layer = 0 +filament_cost = 31.23 +filament_density = 1.25 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=121" +first_layer_temperature = 220 +temperature = 220 +max_fan_speed = 45 +min_fan_speed = 25 +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K43{endif} ; Filament gcode LA 1.0" +filament_spool_weight = 230 + +[filament:Extrudr Flax] +inherits = *PLA* +filament_vendor = Extrudr +filament_cost = 56.23 +filament_density = 1.45 +filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131" +first_layer_temperature = 190 +temperature = 190 +max_fan_speed = 80 +min_fan_speed = 30 +full_fan_speed_layer = 0 +slowdown_below_layer_time = 20 +filament_max_volumetric_speed = 11 +filament_spool_weight = 262 + +[filament:Extrudr GreenTEC] +inherits = *PLA* +filament_vendor = Extrudr +filament_cost = 56 +filament_density = 1.3 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=106" +first_layer_temperature = 208 +temperature = 208 +slowdown_below_layer_time = 20 +filament_spool_weight = 230 + +[filament:Extrudr GreenTEC Pro] +inherits = *PLA* +filament_vendor = Extrudr +filament_cost = 56.23 +filament_density = 1.35 +filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134" +temperature = 215 +max_fan_speed = 80 +min_fan_speed = 30 +full_fan_speed_layer = 0 +slowdown_below_layer_time = 20 +filament_spool_weight = 230 + +[filament:Extrudr GreenTEC Pro Carbon] +inherits = *PLA* +filament_vendor = Extrudr +filament_cost = 56.23 +filament_density = 1.2 +filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138" +first_layer_temperature = 225 +max_fan_speed = 80 +min_fan_speed = 30 +temperature = 225 +full_fan_speed_layer = 0 +slowdown_below_layer_time = 20 +filament_spool_weight = 230 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Extrudr PLA NX1] +inherits = *PLA* +filament_vendor = Extrudr +filament_cost = 22.76 +filament_density = 1.24 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=97" +temperature = 205 +bed_temperature = 60 +first_layer_temperature = 205 +first_layer_bed_temperature = 60 +full_fan_speed_layer = 0 +max_fan_speed = 90 +min_fan_speed = 30 +slowdown_below_layer_time = 20 +filament_spool_weight = 262 + +[filament:Extrudr PLA NX2] +inherits = Extrudr PLA NX1 +filament_cost = 23.63 +filament_density = 1.3 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128" +filament_spool_weight = 0 + +[filament:Extrudr Flex Hard] +inherits = *FLEX* +filament_vendor = Extrudr +disable_fan_first_layers = 1 +extrusion_multiplier = 1.2 +filament_cost = 39.98 +filament_density = 1.2 +filament_deretract_speed = nil +filament_max_volumetric_speed = 3 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115" +filament_retract_length = 0.4 +filament_wipe = nil +filament_spool_weight = 230 +slowdown_below_layer_time = 20 + +[filament:Extrudr Flex Medium] +inherits = *FLEX* +filament_vendor = Extrudr +disable_fan_first_layers = 1 +extrusion_multiplier = 1.2 +filament_cost = 39.98 +filament_density = 1.19 +filament_deretract_speed = nil +filament_max_volumetric_speed = 2 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115" +filament_retract_length = 0.4 +filament_wipe = nil +filament_spool_weight = 230 +slowdown_below_layer_time = 20 + +[filament:Extrudr Flex SemiSoft] +inherits = *FLEX* +filament_vendor = Extrudr +disable_fan_first_layers = 1 +extrusion_multiplier = 1.2 +filament_cost = 39.98 +filament_density = 1.18 +filament_deretract_speed = nil +filament_max_volumetric_speed = 1.2 +filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115" +filament_retract_length = 0.4 +filament_wipe = nil +filament_spool_weight = 230 +slowdown_below_layer_time = 20 + +[filament:addnorth Adamant S1] +inherits = *FLEX* +filament_vendor = addnorth +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +filament_cost = +filament_density = 1.22 +temperature = 250 +bed_temperature = 50 +first_layer_temperature = 245 +first_layer_bed_temperature = 50 +slowdown_below_layer_time = 20 +min_print_speed = 20 +fan_below_layer_time = 15 +fan_always_on = 1 +cooling = 1 +min_fan_speed = 40 +max_fan_speed = 70 +bridge_fan_speed = 60 +filament_deretract_speed = nil +filament_max_volumetric_speed = 1.7 +filament_retract_length = 0.6 +filament_retract_lift = 0.5 +filament_spool_weight = 0 +filament_retract_restart_extra = 0.1 +filament_wipe = nil + +[filament:addnorth Adura X] +inherits = *PET* +filament_vendor = addnorth +filament_cost = 29.99 +filament_density = 1.27 +filament_type = NYLON +extrusion_multiplier = 0.98 +bed_temperature = 60 +first_layer_bed_temperature = 60 +first_layer_temperature = 265 +temperature = 270 +fan_always_on = 0 +min_fan_speed = 20 +max_fan_speed = 40 +bridge_fan_speed = 70 +slowdown_below_layer_time = 10 +min_print_speed = 20 +fan_below_layer_time = 10 +disable_fan_first_layers = 3 +full_fan_speed_layer = 0 +filament_retract_length = 1.4 +filament_retract_lift = 0.4 +filament_max_volumetric_speed = 4 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" +filament_spool_weight = 0 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:addnorth Adura X @MINI] +inherits = addnorth Adura X +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" + +[filament:addnorth Adura X @MMU1] +inherits = addnorth Adura X +filament_retract_length = nil +filament_retract_lift = nil +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" + +[filament:addnorth E-PLA] +inherits = *PLA* +filament_vendor = addnorth +filament_cost = 24.99 +filament_density = 1.24 +extrusion_multiplier = 0.98 +temperature = 215 +bed_temperature = 60 +first_layer_temperature = 215 +first_layer_bed_temperature = 60 +full_fan_speed_layer = 3 +slowdown_below_layer_time = 15 +filament_spool_weight = 0 + +[filament:addnorth ESD-PETG] +inherits = *PET* +filament_vendor = addnorth +filament_cost = 29.99 +filament_density = 1.27 +extrusion_multiplier = 0.98 +bed_temperature = 80 +first_layer_bed_temperature = 85 +first_layer_temperature = 245 +temperature = 265 +fan_always_on = 1 +min_fan_speed = 15 +max_fan_speed = 30 +bridge_fan_speed = 35 +slowdown_below_layer_time = 10 +min_print_speed = 15 +fan_below_layer_time = 8 +disable_fan_first_layers = 3 +full_fan_speed_layer = 0 +filament_retract_length = 1.2 +filament_retract_lift = 0 +filament_max_volumetric_speed = 2 +filament_spool_weight = 0 + +[filament:addnorth ESD-PETG @MINI] +inherits = addnorth ESD-PETG +filament_retract_length = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_max_volumetric_speed = 2 +compatible_printers_condition = printer_model=="MINI" + +[filament:addnorth ESD-PETG @MMU1] +inherits = addnorth ESD-PETG +filament_retract_length = nil +filament_max_volumetric_speed = 2 +compatible_printers_condition = printer_model=="MK2SMM" + +[filament:addnorth OBC Polyethylene] +inherits = *FLEX* +filament_vendor = addnorth +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +filament_cost = 82 +filament_density = 1.22 +temperature = 200 +bed_temperature = 100 +first_layer_temperature = 195 +first_layer_bed_temperature = 100 +slowdown_below_layer_time = 5 +fan_below_layer_time = 15 +fan_always_on = 1 +cooling = 1 +min_fan_speed = 20 +max_fan_speed = 30 +bridge_fan_speed = 40 +min_print_speed = 20 +filament_max_volumetric_speed = 4 +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_spool_weight = 0 +filament_notes = "Use Magigoo PP bed adhesive or PP packing tape (on a cold printbed)." + +[filament:addnorth PETG] +inherits = *PET* +filament_vendor = addnorth +filament_cost = 29.99 +filament_density = 1.27 +bed_temperature = 80 +first_layer_bed_temperature = 85 +first_layer_temperature = 240 +temperature = 250 +fan_always_on = 1 +min_fan_speed = 15 +max_fan_speed = 40 +bridge_fan_speed = 50 +slowdown_below_layer_time = 10 +min_print_speed = 15 +fan_below_layer_time = 15 +disable_fan_first_layers = 3 +full_fan_speed_layer = 0 +filament_retract_length = 1.4 +filament_max_volumetric_speed = 8 +filament_spool_weight = 0 + +[filament:addnorth PETG @MINI] +inherits = addnorth PETG +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_max_volumetric_speed = 7 +compatible_printers_condition = printer_model=="MINI" + +[filament:addnorth PETG @MMU1] +inherits = addnorth PETG +filament_retract_length = nil +filament_retract_lift = nil +filament_max_volumetric_speed = 7 +compatible_printers_condition = printer_model=="MK2SMM" + +[filament:addnorth Rigid X] +inherits = *PET* +filament_vendor = addnorth +filament_cost = 29.99 +filament_density = 1.27 +extrusion_multiplier = 0.98 +bed_temperature = 85 +first_layer_bed_temperature = 90 +first_layer_temperature = 250 +temperature = 260 +fan_always_on = 1 +min_fan_speed = 20 +max_fan_speed = 60 +bridge_fan_speed = 70 +slowdown_below_layer_time = 10 +fan_below_layer_time = 20 +min_print_speed = 20 +disable_fan_first_layers = 3 +full_fan_speed_layer = 0 +filament_retract_length = 1.4 +filament_max_volumetric_speed = 5 +filament_spool_weight = 0 +filament_notes = "Please use a nozzle that is resistant to abrasive filaments, like hardened steel." +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:addnorth Rigid X @MINI] +inherits = addnorth Rigid X +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" + +[filament:addnorth Rigid X @MMU1] +inherits = addnorth Rigid X +filament_retract_length = nil +filament_retract_lift = nil +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" + +[filament:addnorth Textura] +inherits = *PLA* +filament_vendor = addnorth +filament_cost = 24.99 +filament_density = 1.24 +extrusion_multiplier = 0.95 +temperature = 215 +bed_temperature = 65 +first_layer_temperature = 215 +first_layer_bed_temperature = 65 +min_fan_speed = 20 +max_fan_speed = 40 +bridge_fan_speed = 60 +full_fan_speed_layer = 0 +slowdown_below_layer_time = 15 +min_print_speed = 20 +filament_spool_weight = 0 +filament_retract_length = 1 +compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:addnorth Textura @MINI] +inherits = addnorth Textura +filament_retract_length = nil +compatible_printers_condition = printer_model=="MINI" + +[filament:addnorth Textura @MMU1] +inherits = addnorth Textura +filament_retract_length = nil +compatible_printers_condition = printer_model=="MK2SMM" + [filament:Plasty Mladec PETG] inherits = *PET* filament_vendor = Plasty Mladec @@ -2095,16 +2571,43 @@ filament_cost = 33.99 filament_density = 1.20 filament_spool_weight = 230 filament_max_volumetric_speed = 1.2 -filament_retract_length = 0 +filament_retract_length = 0.4 filament_retract_speed = nil -filament_retract_lift = nil +filament_deretract_speed = 20 fan_always_on = 1 cooling = 0 -max_fan_speed = 50 -min_fan_speed = 50 +max_fan_speed = 60 +min_fan_speed = 60 disable_fan_first_layers = 4 full_fan_speed_layer = 6 +[filament:AmazonBasics TPU] +inherits = *FLEX* +filament_vendor = AmazonBasics +fan_always_on = 1 +filament_max_volumetric_speed = 1.8 +extrusion_multiplier = 1.14 +first_layer_temperature = 235 +first_layer_bed_temperature = 50 +temperature = 235 +bed_temperature = 50 +bridge_fan_speed = 100 +max_fan_speed = 80 +min_fan_speed = 80 +filament_retract_before_travel = 3 +filament_cost = 19.99 +filament_density = 1.21 +filament_retract_length = 2 +filament_retract_speed = 45 +filament_deretract_speed = 20 +filament_retract_lift = 0 +filament_wipe = 0 +disable_fan_first_layers = 4 +full_fan_speed_layer = 6 +min_print_speed = 15 +slowdown_below_layer_time = 10 +cooling = 1 + [filament:SainSmart TPU] inherits = *FLEX* filament_vendor = SainSmart @@ -2159,6 +2662,242 @@ min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 +[filament:Filatech FilaFlex30] +inherits = Filatech FilaFlex40 +temperature = 225 +filament_density = 1.15 +extrusion_multiplier = 1.1 +filament_cost = + +[filament:Filatech FilaFlex55] +inherits = Filatech FilaFlex40 +temperature = 230 +filament_density = 1.18 +bed_temperature = 60 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_cost = +first_layer_temperature = 235 +extrusion_multiplier = 1 + +# [filament:Filatech TPE] +# inherits = Filatech FilaFlex40 +# first_layer_temperature = 230 +# temperature = 225 +# filament_density = 1.2 +# fan_below_layer_time = 60 +# max_fan_speed = 80 +# min_fan_speed = 80 +# fan_always_on = 1 + +[filament:Filatech TPU] +inherits = Filatech FilaFlex40 +first_layer_temperature = 230 +filament_density = 1.2 +fan_below_layer_time = 60 +max_fan_speed = 80 +min_fan_speed = 80 +fan_always_on = 1 +temperature = 235 + +[filament:Filatech ABS] +inherits = *ABSC* +filament_vendor = Filatech +filament_cost = +extrusion_multiplier = 0.95 +filament_density = 1.05 + +[filament:Filatech ABS @MINI] +inherits = Filatech ABS +bed_temperature = 100 +filament_retract_length = 2.7 +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = 3 +filament_wipe = 0 +filament_max_volumetric_speed = 10 +slowdown_below_layer_time = 20 +compatible_printers_condition = printer_model=="MINI" +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" + +[filament:Filatech FilaCarbon] +inherits = *ABSC* +filament_vendor = Filatech +filament_cost = +extrusion_multiplier = 0.95 +filament_density = 1.1 +first_layer_bed_temperature = 105 +bed_temperature = 100 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Filatech FilaCarbon @MINI] +inherits = Filatech FilaCarbon +first_layer_bed_temperature = 100 +bed_temperature = 100 +filament_retract_length = 2.7 +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = 3 +filament_wipe = 0 +filament_max_volumetric_speed = 10 +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" +compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" + +[filament:Filatech FilaPLA] +inherits = *PLA* +filament_vendor = Filatech +filament_cost = +filament_density = 1.3 +first_layer_temperature = 235 +first_layer_bed_temperature = 50 +temperature = 230 +bed_temperature = 55 + +[filament:Filatech PLA] +inherits = *PLA* +filament_vendor = Filatech +filament_cost = +filament_density = 1.25 +first_layer_temperature = 215 +temperature = 210 + +[filament:Filatech PLA+] +inherits = Filatech PLA +filament_density = 1.24 + +[filament:Filatech FilaTough] +inherits = Filatech ABS +filament_cost = +extrusion_multiplier = 0.95 +filament_density = 1.29 +first_layer_temperature = 245 +first_layer_bed_temperature = 80 +temperature = 240 +bed_temperature = 90 +cooling = 0 +filament_max_volumetric_speed = 10 +compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Filatech HIPS] +inherits = Prusa HIPS +filament_vendor = Filatech +filament_cost = +filament_density = 1.07 +filament_spool_weight = +first_layer_temperature = 230 +first_layer_bed_temperature = 100 +temperature = 225 +bed_temperature = 110 +compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Filatech HIPS @MINI] +inherits = Filatech HIPS +bed_temperature = 100 +filament_retract_length = 2.7 +filament_retract_speed = nil +filament_deretract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = 3 +filament_wipe = 0 +filament_max_volumetric_speed = 10 +slowdown_below_layer_time = 20 +compatible_printers_condition = printer_model=="MINI" +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" + +[filament:Filatech PA] +inherits = *ABSC* +filament_vendor = Filatech +filament_cost = +filament_density = 1.1 +first_layer_temperature = 275 +first_layer_bed_temperature = 110 +temperature = 275 +bed_temperature = 115 +fan_always_on = 0 +cooling = 0 +bridge_fan_speed = 25 +filament_type = NYLON +filament_max_volumetric_speed = 8 +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Filatech PA @MK2] +inherits = Filatech PA +first_layer_bed_temperature = 105 +bed_temperature = 110 +compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Filatech PA @MINI] +inherits = Filatech PA +first_layer_bed_temperature = 100 +bed_temperature = 100 +filament_max_volumetric_speed = 6 +compatible_printers_condition = printer_model=="MINI" + +[filament:Filatech PC] +inherits = Filatech PA +first_layer_bed_temperature = 110 +bed_temperature = 115 +filament_density = 1.2 +filament_type = PC + +[filament:Filatech PC @MK2] +inherits = Filatech PC +first_layer_bed_temperature = 105 +bed_temperature = 110 +compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Filatech PC-ABS] +inherits = Filatech PC +first_layer_temperature = 270 +temperature = 270 +first_layer_bed_temperature = 110 +bed_temperature = 115 +filament_density = 1.08 +filament_type = PC +fan_always_on = 0 +cooling = 1 +extrusion_multiplier = 0.95 +disable_fan_first_layers = 6 + +[filament:Filatech PC-ABS @MK2] +inherits = Filatech PC-ABS +first_layer_bed_temperature = 105 +bed_temperature = 110 +compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Filatech PETG] +inherits = *PET* +filament_vendor = Filatech +filament_cost = +filament_density = 1.27 +first_layer_temperature = 240 +first_layer_bed_temperature = 75 +temperature = 245 +bed_temperature = 80 +extrusion_multiplier = 0.95 +fan_always_on = 0 + +[filament:Filatech PETG @MINI] +inherits = Filatech PETG +filament_retract_length = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_retract_lift = nil +filament_retract_before_travel = 1 +filament_max_volumetric_speed = 7 +compatible_printers_condition = printer_model=="MINI" +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" + +[filament:Filatech Wood-PLA] +inherits = Filatech PLA +filament_cost = +filament_density = 1.05 +first_layer_temperature = 210 +compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + [filament:Polymaker PC-Max] inherits = *ABS* filament_vendor = Polymaker @@ -2268,7 +3007,7 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no [filament:Prusament PC Blend @MMU2] inherits = *ABS MMU2* filament_vendor = Prusa Polymers -filament_cost = 60.49 +filament_cost = 62.36 filament_density = 1.22 filament_spool_weight = 201 fan_always_on = 0 @@ -2288,13 +3027,25 @@ filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_max_volumetric_speed = 8 -filament_retract_length = 1 filament_retract_lift = 0.2 filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_type = PC filament_colour = #DEE0E6 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0" +[filament:Prusament PC Blend Carbon Fiber @MMU2] +inherits = Prusament PC Blend @MMU2 +filament_cost = 90.73 +filament_density = 1.16 +extrusion_multiplier = 1.04 +fan_below_layer_time = 10 +first_layer_temperature = 280 +temperature = 280 +disable_fan_first_layers = 4 +filament_retract_lift = nil +filament_colour = #BBBBBB +compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + [filament:Prusa ABS @MMU2] inherits = *ABS MMU2* filament_vendor = Made for Prusa @@ -2458,8 +3209,9 @@ filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 120 filament_loading_speed_start = 19 -filament_retract_length = 1.4 +filament_retract_length = 1 filament_retract_lift = 0.2 +filament_max_volumetric_speed = 7 [filament:*PET MMU2 06*] inherits = *PET MMU2* @@ -2664,12 +3416,19 @@ filament_cost = 35.48 filament_density = 1.24 filament_spool_weight = 230 -[filament:SemiFlex or Flexfill 98A] +[filament:SemiFlex] inherits = *FLEX* +renamed_from = "SemiFlex or Flexfill 98A" filament_vendor = Generic filament_cost = 82.26 filament_density = 1.22 +extrusion_multiplier = 1.12 filament_max_volumetric_speed = 1.35 +fan_always_on = 1 +cooling = 0 +max_fan_speed = 30 +min_fan_speed = 30 +filament_retract_length = nil [filament:Fillamentum Flexfill 98A] inherits = *FLEX* @@ -2677,13 +3436,16 @@ filament_vendor = Fillamentum filament_cost = 82.26 filament_density = 1.23 filament_spool_weight = 230 +extrusion_multiplier = 1.12 filament_max_volumetric_speed = 1.35 fan_always_on = 1 cooling = 0 -max_fan_speed = 50 -min_fan_speed = 50 +max_fan_speed = 60 +min_fan_speed = 60 disable_fan_first_layers = 4 full_fan_speed_layer = 6 +filament_retract_length = 1.2 +filament_deretract_speed = 20 [filament:Taulman Bridge] inherits = *common* @@ -3004,8 +3766,8 @@ filament_spool_weight = 230 filament_type = CPE first_layer_bed_temperature = 90 first_layer_temperature = 275 +min_fan_speed = 30 max_fan_speed = 50 -min_fan_speed = 50 disable_fan_first_layers = 3 full_fan_speed_layer = 5 temperature = 275 @@ -3139,16 +3901,22 @@ fan_always_on = 1 max_fan_speed = 15 min_fan_speed = 15 -[filament:SemiFlex or Flexfill 98A @MMU1] +[filament:SemiFlex @MMU1] inherits = *FLEX* +renamed_from = "SemiFlex or Flexfill 98A @MMU1" filament_vendor = Generic filament_cost = 82.26 filament_density = 1.22 +extrusion_multiplier = 1.12 filament_max_volumetric_speed = 1.35 filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = nil compatible_printers_condition = printer_model=="MK2SMM" +fan_always_on = 1 +cooling = 0 +max_fan_speed = 30 +min_fan_speed = 30 [filament:Generic FLEX @MMU1] inherits = *FLEX* @@ -3288,6 +4056,12 @@ filament_colour = #804040 filament_max_volumetric_speed = 6 first_layer_temperature = 260 temperature = 260 +fan_always_on = 0 +cooling = 1 +min_fan_speed = 15 +max_fan_speed = 15 +disable_fan_first_layers = 4 +fan_below_layer_time = 30 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Kimya ABS Kevlar @MINI] @@ -3439,16 +4213,18 @@ filament_spool_weight = 201 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Fillamentum Flexfill 98A @MINI] -inherits = SemiFlex or Flexfill 98A; *FLEXMINI* +inherits = SemiFlex; *FLEXMINI* filament_vendor = Fillamentum first_layer_temperature = 240 temperature = 240 filament_max_volumetric_speed = 1.35 filament_cost = 82.26 filament_spool_weight = 230 +max_fan_speed = 60 +min_fan_speed = 60 [filament:Generic FLEX @MINI] -inherits = SemiFlex or Flexfill 98A; *FLEXMINI* +inherits = SemiFlex; *FLEXMINI* filament_vendor = Generic fan_always_on = 0 bridge_fan_speed = 80 @@ -3528,12 +4304,12 @@ filament_cost = 33.95 bridge_fan_speed = 70 fan_always_on = 1 cooling = 0 -max_fan_speed = 50 -min_fan_speed = 50 +max_fan_speed = 60 +min_fan_speed = 60 filament_max_volumetric_speed = 1.2 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" disable_fan_first_layers = 4 -extrusion_multiplier = 1.2 +extrusion_multiplier = 1.15 start_filament_gcode = "M900 K0 ; Filament gcode" [filament:Fillamentum CPE @MINI] @@ -3547,17 +4323,28 @@ filament_density = 1.25 filament_spool_weight = 230 disable_fan_first_layers = 3 full_fan_speed_layer = 5 +min_fan_speed = 30 [filament:ColorFabb nGen @MINI] inherits = ColorFabb nGen; *PETMINI* filament_cost = 52.46 filament_density = 1.2 filament_spool_weight = 236 +filament_type = NGEN +first_layer_temperature = 240 +bridge_fan_speed = 40 +fan_always_on = 0 +fan_below_layer_time = 10 +max_fan_speed = 35 +min_fan_speed = 20 [filament:E3D PC-ABS @MINI] inherits = E3D PC-ABS; *ABSMINI* filament_density = 1.05 filament_cost = 28.80 +filament_type = PC +first_layer_temperature = 270 +temperature = 270 [filament:Fillamentum ABS @MINI] inherits = Fillamentum ABS; *ABSMINI* @@ -3571,12 +4358,14 @@ max_fan_speed = 15 disable_fan_first_layers = 4 fan_below_layer_time = 30 bridge_fan_speed = 25 +first_layer_temperature = 240 +temperature = 240 [filament:Fillamentum ASA @MINI] inherits = Fillamentum ASA; *ABSMINI* -first_layer_temperature = 255 +first_layer_temperature = 260 first_layer_bed_temperature = 100 -temperature = 255 +temperature = 260 bed_temperature = 100 fan_always_on = 1 cooling = 1 @@ -3603,11 +4392,14 @@ temperature = 270 bridge_fan_speed = 0 filament_cost = 77.3 filament_density = 1.20 +filament_retract_length = nil +filament_retract_before_travel = nil +filament_wipe = nil [filament:Prusament PC Blend @MINI] inherits = *ABSMINI* filament_vendor = Prusa Polymers -filament_cost = 60.49 +filament_cost = 62.36 filament_density = 1.22 filament_spool_weight = 201 fan_always_on = 0 @@ -3633,6 +4425,19 @@ filament_retract_before_travel = nil filament_wipe = nil compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 +[filament:Prusament PC Blend Carbon Fiber @MINI] +inherits = Prusament PC Blend @MINI +filament_cost = 90.73 +filament_density = 1.16 +extrusion_multiplier = 1.04 +first_layer_temperature = 280 +temperature = 280 +disable_fan_first_layers = 4 +fan_below_layer_time = 10 +filament_max_volumetric_speed = 6.5 +filament_colour = #BBBBBB +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 + [filament:Prusa ABS @MINI] inherits = *ABSMINI* filament_vendor = Made for Prusa @@ -3681,7 +4486,7 @@ filament_spool_weight = 236 first_layer_bed_temperature = 100 first_layer_temperature = 270 max_fan_speed = 20 -min_fan_speed = 10 +min_fan_speed = 15 temperature = 270 [filament:ColorFabb XT @MINI] @@ -3844,6 +4649,18 @@ filament_max_volumetric_speed = 13 filament_retract_lift = 0.25 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) +[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle] +inherits = Prusament PC Blend Carbon Fiber +filament_max_volumetric_speed = 13 +filament_retract_lift = 0.25 +compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material + +[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MK2] +inherits = Prusament PC Blend Carbon Fiber @MK2 +filament_max_volumetric_speed = 13 +filament_retract_lift = 0.25 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) + [filament:Prusament PVB @0.8 nozzle] inherits = Prusament PVB first_layer_temperature = 225 @@ -3991,8 +4808,15 @@ filament_retract_lift = 0.25 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" +[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MINI] +inherits = Prusament PC Blend Carbon Fiber @MINI +filament_max_volumetric_speed = 10 +filament_retract_lift = 0.25 +slowdown_below_layer_time = 20 +compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" + [sla_print:*common*] -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ +compatible_printers_condition = printer_model=="SL1" layer_height = 0.05 output_filename_format = [input_filename_base].sl1 pad_edge_radius = 0.5 @@ -4000,7 +4824,7 @@ pad_enable = 1 pad_max_merge_distance = 50 pad_wall_height = 0 pad_wall_thickness = 1 -pad_wall_slope = 90 +pad_wall_slope = 45 slice_closing_radius = 0.005 support_base_diameter = 3 support_base_height = 1 @@ -4019,6 +4843,16 @@ support_pillar_widening_factor = 0 supports_enable = 1 support_small_pillar_diameter_percent = 60% +[sla_print:*SL1S*] +inherits = *common* +support_head_front_diameter = 0.5 +support_head_penetration = 0.5 +support_pillar_diameter = 1 +output_filename_format = [input_filename_base].sl1s +compatible_printers_condition = printer_model=="SL1S" + +# SL1 # + [sla_print:0.025 UltraDetail] inherits = *common* layer_height = 0.025 @@ -4039,10 +4873,27 @@ support_head_front_diameter = 0.5 support_head_penetration = 0.5 support_pillar_diameter = 1.3 +# SL1S # + +[sla_print:0.025 UltraDetail @SL1S] +inherits = *SL1S* +layer_height = 0.025 +support_head_width = 3 + +[sla_print:0.05 Normal @SL1S] +inherits = *SL1S* +layer_height = 0.05 + +[sla_print:0.1 Fast @SL1S] +inherits = *SL1S* +layer_height = 0.1 +support_head_front_diameter = 0.6 +support_head_penetration = 0.6 + ########### Materials -[sla_material:*common 0.05*] -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ +[sla_material:*common*] +compatible_printers_condition = printer_model=="SL1" compatible_prints_condition = layer_height == 0.05 exposure_time = 12 initial_exposure_time = 45 @@ -4051,26 +4902,52 @@ material_correction = 1,1,1 material_notes = [sla_material:*common 0.025*] -inherits = *common 0.05* +inherits = *common* compatible_prints_condition = layer_height == 0.025 exposure_time = 10 initial_exposure_time = 35 initial_layer_height = 0.025 [sla_material:*common 0.035*] -inherits = *common 0.05* +inherits = *common* compatible_prints_condition = layer_height == 0.035 exposure_time = 13 initial_exposure_time = 40 initial_layer_height = 0.035 +[sla_material:*common 0.05*] +inherits = *common* + [sla_material:*common 0.1*] -inherits = *common 0.05* +inherits = *common* compatible_prints_condition = layer_height == 0.1 exposure_time = 20 initial_exposure_time = 45 initial_layer_height = 0.1 +[sla_material:*0.025_sl1s*] +inherits = *common* +compatible_prints_condition = layer_height == 0.025 +compatible_printers_condition = printer_model=="SL1S" +exposure_time = 1.3 +initial_exposure_time = 25 +initial_layer_height = 0.025 + +[sla_material:*0.05_sl1s*] +inherits = *common* +compatible_printers_condition = printer_model=="SL1S" +exposure_time = 1.7 +initial_exposure_time = 25 + +[sla_material:*0.1_sl1s*] +inherits = *common* +compatible_prints_condition = layer_height == 0.1 +compatible_printers_condition = printer_model=="SL1S" +exposure_time = 2.6 +initial_exposure_time = 25 +initial_layer_height = 0.1 + + ########### Materials 0.025 [sla_material:3DM-ABS @0.025] @@ -4087,14 +4964,14 @@ initial_exposure_time = 30 material_type = Tough material_vendor = 3DM -[sla_material:3DM-TOUGH Clear 0.025] +[sla_material:3DM-TOUGH Clear @0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM -[sla_material:3DM-HR Red Wine 0.025] +[sla_material:3DM-HR Red Wine @0.025] inherits = *common 0.025* exposure_time = 14 initial_exposure_time = 35 @@ -4240,8 +5117,31 @@ exposure_time = 4 initial_exposure_time = 35 material_type = Tough material_vendor = Monocure + +## Prusa Polymers 0.025 + +[sla_material:Prusament Resin Tough Prusa Orange @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.025] +inherits = *common 0.025* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers -## Prusa +## Prusa 0.025 [sla_material:Prusa Orange Tough @0.025] inherits = *common 0.025* exposure_time = 6 @@ -4727,7 +5627,7 @@ initial_exposure_time = 30 material_type = Tough material_vendor = 3DM -[sla_material:3DM-TOUGH Clear 0.05] +[sla_material:3DM-TOUGH Clear @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 @@ -4930,7 +5830,30 @@ initial_exposure_time = 35 material_type = Tough material_vendor = Zortrax -## Prusa +## Prusa Polymers 0.05 + +[sla_material:Prusament Resin Tough Prusa Orange @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.05] +inherits = *common 0.05* +exposure_time = 6 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 35 +material_type = Tough +material_vendor = Prusa Polymers + +## Prusa 0.05 [sla_material:Prusa Beige Tough @0.05] inherits = *common 0.05* @@ -5192,7 +6115,30 @@ initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast -## Prusa +## Prusa Polymers 0.1 + +[sla_material:Prusament Resin Tough Prusa Orange @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.1] +inherits = *common 0.1* +exposure_time = 13 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.1] +inherits = *common 0.1* +exposure_time = 14 +initial_exposure_time = 45 +material_type = Tough +material_vendor = Prusa Polymers + +## Prusa 0.1 [sla_material:Prusa Orange Tough @0.1] inherits = *common 0.1* @@ -5271,6 +6217,642 @@ initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa +## SL1S materials ## + +## 0.025 SL1S + +## Prusa Polymers 0.025 + +[sla_material:Prusament Resin Tough Prusa Orange @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +## Made for Prusa 0.025 + +[sla_material:Prusa Orange Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Cyan Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Magenta Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Blue Flexible @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 3 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:PrimaCreator Tough Light Grey @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough White @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Flex Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Water Washable Transparent @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:DruckWege Type D Dental Model @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.2 +initial_exposure_time = 15 +material_type = Dental +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard White @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.6 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:3DM-ABS Orange @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:Peopoly Deft White @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +[sla_material:Peopoly Neo Clear @0.025 SL1S] +inherits = *0.025_sl1s* +exposure_time = 1.8 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +## 0.05 SL1S + +## Prusa Polymers 0.05 + +[sla_material:Prusament Resin Tough Prusa Orange @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +## Made for Prusa 0.05 + +[sla_material:Prusa Orange Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Cyan Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Magenta Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Blue Flexible @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 5 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 5 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 4 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:PrimaCreator Tough Light Grey @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.4 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough White @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Flex Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Water Washable Transparent @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:DruckWege Type D Dental Model @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 1.4 +initial_exposure_time = 15 +material_type = Dental +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard White @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 15 +material_type = Tough +material_vendor = DruckWege + +[sla_material:3DM-ABS Orange @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:Peopoly Deft White @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +[sla_material:Peopoly Neo Clear @0.05 SL1S] +inherits = *0.05_sl1s* +exposure_time = 2 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +## 0.1 SL1S + +## Prusa Polymers 0.1 + +[sla_material:Prusament Resin Tough Prusa Orange @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Rich Black @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +[sla_material:Prusament Resin Tough Anthracite Grey @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Prusa Polymers + +## Made for Prusa 0.1 + +[sla_material:Prusa Orange Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White ABS like @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Azure Blue Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Black Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Cyan Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Magenta Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Maroon Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa White Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Pink Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Blue Flexible @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = Made for Prusa + +[sla_material:Prusa Grey Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Grey High Tenacity @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Vibrant Orange Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 10 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Deep Blue Transparent Tough @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 10 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Made for Prusa + +[sla_material:Prusa Green Dental Casting @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 8 +initial_exposure_time = 50 +material_type = Casting +material_vendor = Made for Prusa + +[sla_material:PrimaCreator Tough Light Grey @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Tough White @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Flex Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Flexible +material_vendor = PrimaCreator + +[sla_material:PrimaCreator Water Washable Transparent @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = PrimaCreator + +[sla_material:DruckWege Type D Dental Model @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 15 +material_type = Dental +material_vendor = DruckWege + +[sla_material:3DM-ABS Orange @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:3DM-TOUGH Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 3 +initial_exposure_time = 25 +material_type = Tough +material_vendor = 3DM + +[sla_material:Peopoly Deft White @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + +[sla_material:Peopoly Neo Clear @0.1 SL1S] +inherits = *0.1_sl1s* +exposure_time = 2.6 +initial_exposure_time = 25 +material_type = Tough +material_vendor = Peopoly + [printer:*common*] printer_technology = FFF bed_shape = 0x0,250x0,250x210,0x210 @@ -5333,6 +6915,7 @@ printer_model = MK2S printer_variant = 0.4 default_print_profile = 0.15mm OPTIMAL default_filament_profile = Prusament PLA +color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change [printer:*multimaterial*] inherits = *common* @@ -5389,6 +6972,7 @@ variable_layer_height = 1 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK2S 0.6 nozzle] inherits = *common* @@ -5397,6 +6981,7 @@ min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change # XXXXXXXXXXXXXXXXXXX # XXX--- MK2MM ---XXX @@ -5438,21 +7023,21 @@ inherits = Original Prusa i3 MK2S printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.25 nozzle] inherits = Original Prusa i3 MK2S 0.25 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.6 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.8 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle @@ -5464,9 +7049,10 @@ min_layer_height = 0.2 retract_length = 1 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5 MMU2 Single] inherits = Original Prusa i3 MK2.5; *mm2* @@ -5495,7 +7081,7 @@ machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle] @@ -5540,24 +7126,24 @@ single_extruder_multi_material = 1 # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 -extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S] inherits = Original Prusa i3 MK2.5 printer_model = MK2.5S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.25 nozzle] inherits = Original Prusa i3 MK2.5 0.25 nozzle printer_model = MK2.5S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.6 nozzle] inherits = Original Prusa i3 MK2.5 0.6 nozzle printer_model = MK2.5S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.8 nozzle] inherits = Original Prusa i3 MK2.5 0.8 nozzle @@ -5590,7 +7176,7 @@ machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle] @@ -5601,9 +7187,10 @@ min_layer_height = 0.2 nozzle_diameter = 0.8 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single @@ -5613,6 +7200,7 @@ min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single @@ -5623,7 +7211,8 @@ nozzle_diameter = 0.25 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5S MMU2S] inherits = Original Prusa i3 MK2.5; *mm2s* @@ -5655,8 +7244,8 @@ single_extruder_multi_material = 1 # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 -extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle] @@ -5666,6 +7255,7 @@ max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK2.5 MMU2 @@ -5674,6 +7264,7 @@ max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. @@ -5685,7 +7276,7 @@ default_print_profile = 0.20mm NORMAL @0.6 nozzle ## printer_variant = 0.8 ## retract_length = 1 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n ## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle] ## inherits = Original Prusa i3 MK2.5 MMU2 @@ -5695,7 +7286,7 @@ default_print_profile = 0.20mm NORMAL @0.6 nozzle ## printer_variant = 0.8 ## retract_length = 1 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n # XXXXXXXXXXXXXXXXX # XXX--- MK3 ---XXX @@ -5725,7 +7316,7 @@ remaining_times = 1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n retract_lift_below = 209 max_print_height = 210 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} printer_model = MK3 default_print_profile = 0.15mm QUALITY @MK3 @@ -5736,8 +7327,9 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK3 0.6 nozzle] inherits = Original Prusa i3 MK3 @@ -5745,8 +7337,9 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3 0.8 nozzle] inherits = Original Prusa i3 MK3 @@ -5755,21 +7348,22 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+] inherits = Original Prusa i3 MK3 renamed_from = "Original Prusa i3 MK3S" printer_model = MK3S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} [printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle] inherits = Original Prusa i3 MK3 0.25 nozzle renamed_from = "Original Prusa i3 MK3S 0.25 nozzle" printer_model = MK3S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} [printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle] inherits = Original Prusa i3 MK3 0.6 nozzle @@ -5786,7 +7380,7 @@ single_extruder_multi_material = 1 cooling_tube_length = 10 cooling_tube_retraction = 30 parking_pos_retraction = 85 -retract_length_toolchange = 3 +retract_length_toolchange = 2 extra_loading_move = -13 printer_model = MK3MMU2 default_print_profile = 0.15mm QUALITY @MK3 @@ -5798,7 +7392,7 @@ single_extruder_multi_material = 1 cooling_tube_length = 20 cooling_tube_retraction = 40 parking_pos_retraction = 85 -retract_length_toolchange = 3 +retract_length_toolchange = 2 extra_loading_move = -25 printer_model = MK3SMMU2S default_print_profile = 0.15mm QUALITY @MK3 @@ -5808,7 +7402,7 @@ default_filament_profile = Prusament PLA @MMU2 inherits = *mm2* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle] @@ -5818,8 +7412,9 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle @@ -5829,9 +7424,10 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single @@ -5841,8 +7437,9 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2] inherits = *mm2* @@ -5851,8 +7448,8 @@ inherits = *mm2* # to be defined explicitely. machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 -extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single] @@ -5860,7 +7457,7 @@ inherits = *mm2s* renamed_from = "Original Prusa i3 MK3S MMU2S Single" single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle] @@ -5871,8 +7468,9 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle @@ -5882,9 +7480,10 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle +color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single @@ -5895,16 +7494,17 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK3S & MK3S+ MMU2S] inherits = *mm2s* renamed_from = "Original Prusa i3 MK3S MMU2S" machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 -extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n ## 0.6mm nozzle MMU2/S printer profiles @@ -5916,8 +7516,9 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 @@ -5925,8 +7526,9 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 +color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## 0.8mm nozzle MMU2/S printer profiles @@ -5938,7 +7540,7 @@ default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle] @@ -5947,7 +7549,7 @@ default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## MINI @@ -5997,9 +7599,10 @@ retract_layer_change = 1 silent_mode = 0 remaining_times = 1 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow -end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors +end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n extruder_colour = +color_change_gcode = M600 [printer:Original Prusa MINI & MINI+ 0.25 nozzle] inherits = Original Prusa MINI & MINI+ @@ -6022,7 +7625,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI -retract_length = 3.5 +retract_length = 3.2 retract_before_travel = 1.5 [printer:Original Prusa MINI & MINI+ 0.8 nozzle] @@ -6057,6 +7660,36 @@ max_initial_exposure_time = 300 printer_correction = 1,1,1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n +[printer:Original Prusa SL1S SPEED] +printer_technology = SLA +printer_model = SL1S +printer_variant = default +default_sla_material_profile = Prusa Orange Tough @0.05 SL1S +default_sla_print_profile = 0.05 Normal @SL1S +thumbnails = 400x400,800x480 +bed_shape = 0.5x0.5,127.5x0.5,127.5x80.5,0.5x80.5 +display_height = 81 +display_mirror_x = 1 +display_mirror_y = 0 +display_orientation = portrait +display_pixels_x = 2560 +display_pixels_y = 1620 +display_width = 128 +elefant_foot_compensation = 0.2 +elefant_foot_min_width = 0.2 +fast_tilt_time = 2.5 +slow_tilt_time = 5 +gamma_correction = 1 +max_print_height = 150 +min_exposure_time = 1 +max_exposure_time = 120 +min_initial_exposure_time = 1 +max_initial_exposure_time = 300 +printer_correction = 1,1,1 +relative_correction = 1,1 +area_fill = 45 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1S\n + # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer. [obsolete_presets] print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2" diff --git a/openscad/own/parametric wargaming base/wagaming_base.png b/openscad/own/parametric wargaming base/wagaming_base.png deleted file mode 100644 index 2b65281..0000000 Binary files a/openscad/own/parametric wargaming base/wagaming_base.png and /dev/null differ diff --git a/openscad/own/parametric wargaming base/wagaming_base.scad b/openscad/own/parametric wargaming base/wagaming_base.scad deleted file mode 100644 index 1597de8..0000000 --- a/openscad/own/parametric wargaming base/wagaming_base.scad +++ /dev/null @@ -1,17 +0,0 @@ -// Inverted Wargaming base -// by zeus - 2021-11-11 - CC-BY-NC-SA-4.0 -// ### -// Variables -base_lower_dia=32; //diameter in mm -base_upper_dia=30; //upper diameter -cutout_dia=base_upper_dia-1.6; //adjusted for 2 walls on 0.4 nozzle (0.4*2*2) -base_h=4; //overall height -mt=1.5; //bottom thickness, suitable for 0.3 and 0.5 layers -$fn=150; -// -// ### -// Model -difference(){ - cylinder(r1=base_lower_dia/2, r2=base_upper_dia/2, h=base_h); - translate([0,0,mt]) #cylinder(r=cutout_dia/2, h=base_h-mt+0.1); -} \ No newline at end of file diff --git a/openscad/own/parametric wargaming base/wagaming_base.stl b/openscad/own/parametric wargaming base/wagaming_base.stl deleted file mode 100644 index 5036674..0000000 Binary files a/openscad/own/parametric wargaming base/wagaming_base.stl and /dev/null differ