Compare commits
No commits in common. "deddc858ceb60a4a0782819fa9268b5c9f9b7d4b" and "4ce15601000c9175a6285e8865ae38ba239bc290" have entirely different histories.
deddc858ce
...
4ce1560100
|
|
@ -1,4 +1,4 @@
|
||||||
# generated by PrusaSlicer 2.3.3+linux-x64 on 2022-02-10 at 18:37:53 UTC
|
# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-16 at 10:37:16 UTC
|
||||||
auto_toolbar_size = 100
|
auto_toolbar_size = 100
|
||||||
autocenter = 0
|
autocenter = 0
|
||||||
background_processing = 0
|
background_processing = 0
|
||||||
|
|
@ -30,10 +30,10 @@ use_inches = 0
|
||||||
use_perspective_camera = 0
|
use_perspective_camera = 0
|
||||||
version = 2.3.3+linux-x64
|
version = 2.3.3+linux-x64
|
||||||
version_check = 1
|
version_check = 1
|
||||||
version_online = 2.4.0
|
version_online = 2.3.3
|
||||||
version_online_seen = 2.4.0
|
version_online_seen = 2.3.3
|
||||||
view_mode = expert
|
view_mode = expert
|
||||||
window_mainframe = 2556; 30; 2556; 1385; 0
|
window_mainframe = 0; 30; 2556; 1385; 0
|
||||||
|
|
||||||
[filaments]
|
[filaments]
|
||||||
Generic ABS = 1
|
Generic ABS = 1
|
||||||
|
|
@ -53,13 +53,13 @@ Prusament PLA = 1
|
||||||
filament = PETG-DasFilament_Saphirblau
|
filament = PETG-DasFilament_Saphirblau
|
||||||
physical_printer =
|
physical_printer =
|
||||||
print = delta
|
print = delta
|
||||||
printer = sparky
|
printer = delta
|
||||||
sla_material = Prusa Orange Tough @0.025
|
sla_material = Prusa Orange Tough @0.025
|
||||||
sla_print = 0.025 UltraDetail
|
sla_print = 0.025 UltraDetail
|
||||||
|
|
||||||
[recent]
|
[recent]
|
||||||
config_directory = /home/knki1108/Downloads/3d/calibration/models
|
config_directory = /home/knki1108/Downloads/3d/calibration/models
|
||||||
skein_directory = /home/kostiank/git/zeus/3d-stuff/openscad/own/auto-luefterschlitz-blende
|
skein_directory = /home/knki1108/smb4k/BACKUP.GLA.KOSTIANIX.DE/austausch/Wargaming/One Page Rules - Age of Fantasy/Miniaturen/Mummified Undead/Guardian Statues/Large (46mm)
|
||||||
|
|
||||||
[recent_projects]
|
[recent_projects]
|
||||||
1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf
|
1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf
|
||||||
|
|
|
||||||
|
|
@ -1,10 +1,3 @@
|
||||||
min_slic3r_version = 2.4.0-rc
|
|
||||||
1.4.2 Added SLA material profiles.
|
|
||||||
1.4.1 Updated firmware version.
|
|
||||||
1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
|
|
||||||
min_slic3r_version = 2.4.0-beta2
|
|
||||||
1.4.0-beta3 Added material profiles for Prusament Resins.
|
|
||||||
1.4.0-beta2 Added SLA material colors. Updated BASF filament profiles.
|
|
||||||
min_slic3r_version = 2.4.0-beta0
|
min_slic3r_version = 2.4.0-beta0
|
||||||
1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI.
|
1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI.
|
||||||
1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
|
1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
|
||||||
|
|
@ -22,15 +15,11 @@ min_slic3r_version = 2.4.0-alpha0
|
||||||
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
||||||
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
min_slic3r_version = 2.3.2-alpha0
|
||||||
1.3.6 Updated firmware version.
|
|
||||||
1.3.5 Added material profiles for Prusament Resins.
|
|
||||||
1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
|
|
||||||
1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
|
1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
|
||||||
1.3.2 Added material profiles for Prusament Resin.
|
1.3.2 Added material profiles for Prusament Resin.
|
||||||
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
||||||
1.3.0 Added SL1S SPEED profiles.
|
1.3.0 Added SL1S SPEED profiles.
|
||||||
min_slic3r_version = 2.3.0-rc1
|
min_slic3r_version = 2.3.0-rc1
|
||||||
1.2.11 Updated firmware version.
|
|
||||||
1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
|
1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
|
||||||
1.2.9 Added material profiles for Prusament Resin.
|
1.2.9 Added material profiles for Prusament Resin.
|
||||||
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
||||||
|
|
@ -50,7 +39,6 @@ min_slic3r_version = 2.3.0-alpha4
|
||||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||||
1.2.0-alpha0 Added filament spool weights
|
1.2.0-alpha0 Added filament spool weights
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
min_slic3r_version = 2.2.0-alpha3
|
||||||
1.1.15 Updated firmware version.
|
|
||||||
1.1.14 Updated firmware version.
|
1.1.14 Updated firmware version.
|
||||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||||
|
|
|
||||||
|
|
@ -5,7 +5,7 @@
|
||||||
name = Prusa Research
|
name = Prusa Research
|
||||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||||
config_version = 1.3.6
|
config_version = 1.3.3
|
||||||
# Where to get the updates from?
|
# Where to get the updates from?
|
||||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
||||||
changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||||
|
|
@ -2898,117 +2898,6 @@ filament_density = 1.05
|
||||||
first_layer_temperature = 210
|
first_layer_temperature = 210
|
||||||
compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||||
|
|
||||||
[filament:Ultrafuse PET]
|
|
||||||
inherits = *PET*
|
|
||||||
filament_vendor = BASF
|
|
||||||
filament_cost =
|
|
||||||
filament_density = 1.33
|
|
||||||
first_layer_temperature = 220
|
|
||||||
first_layer_bed_temperature = 70
|
|
||||||
temperature = 215
|
|
||||||
bed_temperature = 70
|
|
||||||
fan_below_layer_time = 10
|
|
||||||
min_fan_speed = 75
|
|
||||||
max_fan_speed = 100
|
|
||||||
bridge_fan_speed = 100
|
|
||||||
filament_type = PET
|
|
||||||
disable_fan_first_layers = 1
|
|
||||||
full_fan_speed_layer = 3
|
|
||||||
filament_notes = "BASF Forward AM Ultrafuse PET\nMaterial profile version 1.0\n\nMaterial Description\nUltrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.\n\nPrinting Recommendations:\nUltrafuse PET can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion.\n"
|
|
||||||
filament_retract_length = 2
|
|
||||||
filament_retract_speed = 40
|
|
||||||
filament_retract_before_travel = 2
|
|
||||||
filament_wipe = 0
|
|
||||||
filament_retract_layer_change = 0
|
|
||||||
filament_retract_lift = 0
|
|
||||||
|
|
||||||
[filament:Ultrafuse PET @MINI]
|
|
||||||
inherits = Ultrafuse PET
|
|
||||||
filament_retract_length = nil
|
|
||||||
filament_retract_speed = 40
|
|
||||||
filament_deretract_speed = 25
|
|
||||||
filament_retract_lift = nil
|
|
||||||
filament_retract_before_travel = 1
|
|
||||||
filament_max_volumetric_speed = 7
|
|
||||||
compatible_printers_condition = printer_model=="MINI"
|
|
||||||
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
|
|
||||||
|
|
||||||
[filament:Ultrafuse PRO1]
|
|
||||||
inherits = Prusament PLA
|
|
||||||
filament_vendor = BASF
|
|
||||||
filament_cost =
|
|
||||||
filament_density = 1.25
|
|
||||||
filament_spool_weight = 0
|
|
||||||
filament_colour = #FFFFFF
|
|
||||||
filament_notes = "BASF Forward AM Ultrafuse PLA PRO1\nMaterial profile version 1.0\n\nMaterial Description\nPLA PRO1 is an extremely versatile tough PLA filament made for professionals. It reduces your printing time by 30% – 80%, (subject to printer and object limitations) and the strength exceeds overall mechanical properties of printed ABS parts. Printer settings can be tuned to achieve blazing fast speeds or an unrivaled surface finish. The excellent quality control ensures the highest levels of consistency between colors and batches, it will perform as expected, every time.\n\nPrinting Recommendations:\nUltrafuse PLA PRO1 can be printed directly onto a clean build plate.\n"
|
|
||||||
filament_retract_length = 2
|
|
||||||
filament_retract_lift = 0
|
|
||||||
filament_retract_speed = 40
|
|
||||||
filament_retract_before_travel = 2
|
|
||||||
filament_retract_layer_change = 0
|
|
||||||
compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
||||||
|
|
||||||
[filament:Ultrafuse PRO1 @MINI]
|
|
||||||
inherits = Ultrafuse PRO1
|
|
||||||
filament_retract_length = nil
|
|
||||||
filament_retract_speed = nil
|
|
||||||
filament_retract_before_travel = nil
|
|
||||||
filament_retract_layer_change = nil
|
|
||||||
compatible_printers_condition = printer_model=="MINI"
|
|
||||||
|
|
||||||
[filament:Ultrafuse ABS]
|
|
||||||
inherits = *ABSC*
|
|
||||||
filament_vendor = BASF
|
|
||||||
filament_cost =
|
|
||||||
filament_density = 1.04
|
|
||||||
min_fan_speed = 10
|
|
||||||
max_fan_speed = 20
|
|
||||||
bed_temperature = 100
|
|
||||||
disable_fan_first_layers = 3
|
|
||||||
filament_colour = #FFFFFF
|
|
||||||
filament_notes = "BASF Forward AM Ultrafuse ABS\nMaterial profile version 1.0\n\nMaterial Description\nABS is the second most used 3D printing material. It is strong, flexible and has a high heat resistance. ABS is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone. To make a proper 3D print with ABS you will need a heated print bed. The filament is available in 9 colors.\n\nPrinting Recommendations:\n\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion.\n"
|
|
||||||
filament_retract_length = 2
|
|
||||||
filament_retract_speed = 40
|
|
||||||
filament_retract_before_travel = 2
|
|
||||||
filament_wipe = 0
|
|
||||||
filament_retract_layer_change = 0
|
|
||||||
|
|
||||||
[filament:Ultrafuse ABS @MINI]
|
|
||||||
inherits = Ultrafuse ABS
|
|
||||||
bed_temperature = 100
|
|
||||||
filament_retract_length = 2.7
|
|
||||||
filament_retract_speed = nil
|
|
||||||
filament_deretract_speed = nil
|
|
||||||
filament_retract_lift = nil
|
|
||||||
filament_retract_before_travel = 3
|
|
||||||
filament_wipe = 0
|
|
||||||
filament_max_volumetric_speed = 10
|
|
||||||
slowdown_below_layer_time = 20
|
|
||||||
compatible_printers_condition = printer_model=="MINI"
|
|
||||||
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
|
|
||||||
|
|
||||||
[filament:Ultrafuse Metal]
|
|
||||||
inherits = *ABSC*
|
|
||||||
renamed_from = "Ultrafuse 17-4 PH"
|
|
||||||
filament_vendor = BASF
|
|
||||||
filament_cost =
|
|
||||||
filament_density = 4.5
|
|
||||||
extrusion_multiplier = 1.08
|
|
||||||
first_layer_temperature = 250
|
|
||||||
first_layer_bed_temperature = 100
|
|
||||||
temperature = 250
|
|
||||||
bed_temperature = 100
|
|
||||||
min_fan_speed = 0
|
|
||||||
max_fan_speed = 0
|
|
||||||
bridge_fan_speed = 0
|
|
||||||
cooling = 0
|
|
||||||
fan_always_on = 0
|
|
||||||
filament_max_volumetric_speed = 4
|
|
||||||
filament_type = METAL
|
|
||||||
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
||||||
start_filament_gcode = "M900 K0"
|
|
||||||
filament_colour = #FFFFFF
|
|
||||||
|
|
||||||
[filament:Polymaker PC-Max]
|
[filament:Polymaker PC-Max]
|
||||||
inherits = *ABS*
|
inherits = *ABS*
|
||||||
filament_vendor = Polymaker
|
filament_vendor = Polymaker
|
||||||
|
|
@ -5251,42 +5140,7 @@ exposure_time = 6
|
||||||
initial_exposure_time = 35
|
initial_exposure_time = 35
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Prusa Polymers
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Sandstone Model @0.025]
|
|
||||||
inherits = *common 0.025*
|
|
||||||
exposure_time = 4
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Terra Brown @0.025]
|
|
||||||
inherits = *common 0.025*
|
|
||||||
exposure_time = 4
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Brick Red @0.025]
|
|
||||||
inherits = *common 0.025*
|
|
||||||
exposure_time = 4
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Grass Green @0.025]
|
|
||||||
inherits = *common 0.025*
|
|
||||||
exposure_time = 4
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Bright Yellow @0.025]
|
|
||||||
inherits = *common 0.025*
|
|
||||||
exposure_time = 4
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
## Prusa 0.025
|
## Prusa 0.025
|
||||||
[sla_material:Prusa Orange Tough @0.025]
|
[sla_material:Prusa Orange Tough @0.025]
|
||||||
inherits = *common 0.025*
|
inherits = *common 0.025*
|
||||||
|
|
@ -5999,41 +5853,6 @@ initial_exposure_time = 35
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Prusa Polymers
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Sandstone Model @0.05]
|
|
||||||
inherits = *common 0.05*
|
|
||||||
exposure_time = 6
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Terra Brown @0.05]
|
|
||||||
inherits = *common 0.05*
|
|
||||||
exposure_time = 6
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Brick Red @0.05]
|
|
||||||
inherits = *common 0.05*
|
|
||||||
exposure_time = 6
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Grass Green @0.05]
|
|
||||||
inherits = *common 0.05*
|
|
||||||
exposure_time = 6
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Bright Yellow @0.05]
|
|
||||||
inherits = *common 0.05*
|
|
||||||
exposure_time = 6
|
|
||||||
initial_exposure_time = 35
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
## Prusa 0.05
|
## Prusa 0.05
|
||||||
|
|
||||||
[sla_material:Prusa Beige Tough @0.05]
|
[sla_material:Prusa Beige Tough @0.05]
|
||||||
|
|
@ -6319,41 +6138,6 @@ initial_exposure_time = 45
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Prusa Polymers
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Sandstone Model @0.1]
|
|
||||||
inherits = *common 0.1*
|
|
||||||
exposure_time = 13
|
|
||||||
initial_exposure_time = 45
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Terra Brown @0.1]
|
|
||||||
inherits = *common 0.1*
|
|
||||||
exposure_time = 13
|
|
||||||
initial_exposure_time = 45
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Brick Red @0.1]
|
|
||||||
inherits = *common 0.1*
|
|
||||||
exposure_time = 13
|
|
||||||
initial_exposure_time = 45
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Grass Green @0.1]
|
|
||||||
inherits = *common 0.1*
|
|
||||||
exposure_time = 13
|
|
||||||
initial_exposure_time = 45
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Bright Yellow @0.1]
|
|
||||||
inherits = *common 0.1*
|
|
||||||
exposure_time = 13
|
|
||||||
initial_exposure_time = 45
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
## Prusa 0.1
|
## Prusa 0.1
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.1]
|
[sla_material:Prusa Orange Tough @0.1]
|
||||||
|
|
@ -6460,41 +6244,6 @@ initial_exposure_time = 25
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Prusa Polymers
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Sandstone Model @0.025 SL1S]
|
|
||||||
inherits = *0.025_sl1s*
|
|
||||||
exposure_time = 2
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Terra Brown @0.025 SL1S]
|
|
||||||
inherits = *0.025_sl1s*
|
|
||||||
exposure_time = 1.8
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Brick Red @0.025 SL1S]
|
|
||||||
inherits = *0.025_sl1s*
|
|
||||||
exposure_time = 1.8
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Grass Green @0.025 SL1S]
|
|
||||||
inherits = *0.025_sl1s*
|
|
||||||
exposure_time = 1.8
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Bright Yellow @0.025 SL1S]
|
|
||||||
inherits = *0.025_sl1s*
|
|
||||||
exposure_time = 1.8
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
## Made for Prusa 0.025
|
## Made for Prusa 0.025
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.025 SL1S]
|
[sla_material:Prusa Orange Tough @0.025 SL1S]
|
||||||
|
|
@ -6711,41 +6460,6 @@ initial_exposure_time = 25
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Prusa Polymers
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Sandstone Model @0.05 SL1S]
|
|
||||||
inherits = *0.05_sl1s*
|
|
||||||
exposure_time = 2.4
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Terra Brown @0.05 SL1S]
|
|
||||||
inherits = *0.05_sl1s*
|
|
||||||
exposure_time = 2
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Brick Red @0.05 SL1S]
|
|
||||||
inherits = *0.05_sl1s*
|
|
||||||
exposure_time = 2
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Grass Green @0.05 SL1S]
|
|
||||||
inherits = *0.05_sl1s*
|
|
||||||
exposure_time = 2
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Bright Yellow @0.05 SL1S]
|
|
||||||
inherits = *0.05_sl1s*
|
|
||||||
exposure_time = 2
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
## Made for Prusa 0.05
|
## Made for Prusa 0.05
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.05 SL1S]
|
[sla_material:Prusa Orange Tough @0.05 SL1S]
|
||||||
|
|
@ -6962,43 +6676,6 @@ initial_exposure_time = 25
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Prusa Polymers
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Sandstone Model @0.1 SL1S]
|
|
||||||
inherits = *0.1_sl1s*
|
|
||||||
exposure_time = 3
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Terra Brown @0.1 SL1S]
|
|
||||||
inherits = *0.1_sl1s*
|
|
||||||
exposure_time = 2.6
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Brick Red @0.1 SL1S]
|
|
||||||
inherits = *0.1_sl1s*
|
|
||||||
exposure_time = 2.6
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Grass Green @0.1 SL1S]
|
|
||||||
inherits = *0.1_sl1s*
|
|
||||||
exposure_time = 2.6
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
material_colour = #37823F
|
|
||||||
|
|
||||||
[sla_material:Prusament Resin Tough Bright Yellow @0.1 SL1S]
|
|
||||||
inherits = *0.1_sl1s*
|
|
||||||
exposure_time = 2.6
|
|
||||||
initial_exposure_time = 25
|
|
||||||
material_type = Tough
|
|
||||||
material_vendor = Prusa Polymers
|
|
||||||
material_colour = #F9DB4C
|
|
||||||
|
|
||||||
## Made for Prusa 0.1
|
## Made for Prusa 0.1
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.1 SL1S]
|
[sla_material:Prusa Orange Tough @0.1 SL1S]
|
||||||
|
|
@ -7203,7 +6880,6 @@ machine_max_jerk_y = 10
|
||||||
machine_max_jerk_z = 0.2
|
machine_max_jerk_z = 0.2
|
||||||
machine_min_extruding_rate = 0
|
machine_min_extruding_rate = 0
|
||||||
machine_min_travel_rate = 0
|
machine_min_travel_rate = 0
|
||||||
machine_limits_usage = emit_to_gcode
|
|
||||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||||
max_layer_height = 0.25
|
max_layer_height = 0.25
|
||||||
min_layer_height = 0.07
|
min_layer_height = 0.07
|
||||||
|
|
@ -7347,21 +7023,21 @@ inherits = Original Prusa i3 MK2S
|
||||||
printer_model = MK2.5
|
printer_model = MK2.5
|
||||||
remaining_times = 1
|
remaining_times = 1
|
||||||
machine_max_jerk_e = 4.5
|
machine_max_jerk_e = 4.5
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
||||||
inherits = Original Prusa i3 MK2S 0.25 nozzle
|
inherits = Original Prusa i3 MK2S 0.25 nozzle
|
||||||
printer_model = MK2.5
|
printer_model = MK2.5
|
||||||
remaining_times = 1
|
remaining_times = 1
|
||||||
machine_max_jerk_e = 4.5
|
machine_max_jerk_e = 4.5
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
||||||
inherits = Original Prusa i3 MK2S 0.6 nozzle
|
inherits = Original Prusa i3 MK2S 0.6 nozzle
|
||||||
printer_model = MK2.5
|
printer_model = MK2.5
|
||||||
remaining_times = 1
|
remaining_times = 1
|
||||||
machine_max_jerk_e = 4.5
|
machine_max_jerk_e = 4.5
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5 0.8 nozzle]
|
[printer:Original Prusa i3 MK2.5 0.8 nozzle]
|
||||||
inherits = Original Prusa i3 MK2S 0.6 nozzle
|
inherits = Original Prusa i3 MK2S 0.6 nozzle
|
||||||
|
|
@ -7373,7 +7049,7 @@ min_layer_height = 0.2
|
||||||
retract_length = 1
|
retract_length = 1
|
||||||
remaining_times = 1
|
remaining_times = 1
|
||||||
machine_max_jerk_e = 4.5
|
machine_max_jerk_e = 4.5
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
default_filament_profile = Prusament PLA @0.8 nozzle
|
default_filament_profile = Prusament PLA @0.8 nozzle
|
||||||
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
||||||
|
|
@ -7405,7 +7081,7 @@ machine_min_travel_rate = 0
|
||||||
default_print_profile = 0.15mm OPTIMAL @MK2.5
|
default_print_profile = 0.15mm OPTIMAL @MK2.5
|
||||||
default_filament_profile = Prusament PLA
|
default_filament_profile = Prusament PLA
|
||||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||||
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle]
|
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle]
|
||||||
|
|
@ -7451,23 +7127,23 @@ single_extruder_multi_material = 1
|
||||||
# to be defined explicitely.
|
# to be defined explicitely.
|
||||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||||
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||||
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n
|
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5S]
|
[printer:Original Prusa i3 MK2.5S]
|
||||||
inherits = Original Prusa i3 MK2.5
|
inherits = Original Prusa i3 MK2.5
|
||||||
printer_model = MK2.5S
|
printer_model = MK2.5S
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
|
[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
|
||||||
inherits = Original Prusa i3 MK2.5 0.25 nozzle
|
inherits = Original Prusa i3 MK2.5 0.25 nozzle
|
||||||
printer_model = MK2.5S
|
printer_model = MK2.5S
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
|
[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
|
||||||
inherits = Original Prusa i3 MK2.5 0.6 nozzle
|
inherits = Original Prusa i3 MK2.5 0.6 nozzle
|
||||||
printer_model = MK2.5S
|
printer_model = MK2.5S
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5S 0.8 nozzle]
|
[printer:Original Prusa i3 MK2.5S 0.8 nozzle]
|
||||||
inherits = Original Prusa i3 MK2.5 0.8 nozzle
|
inherits = Original Prusa i3 MK2.5 0.8 nozzle
|
||||||
|
|
@ -7500,7 +7176,7 @@ machine_min_travel_rate = 0
|
||||||
default_print_profile = 0.15mm OPTIMAL @MK2.5
|
default_print_profile = 0.15mm OPTIMAL @MK2.5
|
||||||
default_filament_profile = Prusament PLA
|
default_filament_profile = Prusament PLA
|
||||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||||
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
|
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
|
||||||
|
|
@ -7511,7 +7187,7 @@ min_layer_height = 0.2
|
||||||
nozzle_diameter = 0.8
|
nozzle_diameter = 0.8
|
||||||
printer_variant = 0.8
|
printer_variant = 0.8
|
||||||
retract_length = 1
|
retract_length = 1
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
default_filament_profile = Prusament PLA @0.8 nozzle
|
default_filament_profile = Prusament PLA @0.8 nozzle
|
||||||
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
||||||
|
|
@ -7535,7 +7211,7 @@ nozzle_diameter = 0.25
|
||||||
printer_variant = 0.25
|
printer_variant = 0.25
|
||||||
retract_lift = 0.15
|
retract_lift = 0.15
|
||||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||||
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5S MMU2S]
|
[printer:Original Prusa i3 MK2.5S MMU2S]
|
||||||
|
|
@ -7569,7 +7245,7 @@ single_extruder_multi_material = 1
|
||||||
# to be defined explicitely.
|
# to be defined explicitely.
|
||||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||||
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||||
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n
|
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
|
[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
|
||||||
|
|
@ -7600,7 +7276,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
## printer_variant = 0.8
|
## printer_variant = 0.8
|
||||||
## retract_length = 1
|
## retract_length = 1
|
||||||
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||||
|
|
||||||
## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle]
|
## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle]
|
||||||
## inherits = Original Prusa i3 MK2.5 MMU2
|
## inherits = Original Prusa i3 MK2.5 MMU2
|
||||||
|
|
@ -7610,7 +7286,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
## printer_variant = 0.8
|
## printer_variant = 0.8
|
||||||
## retract_length = 1
|
## retract_length = 1
|
||||||
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||||
|
|
||||||
# XXXXXXXXXXXXXXXXX
|
# XXXXXXXXXXXXXXXXX
|
||||||
# XXX--- MK3 ---XXX
|
# XXX--- MK3 ---XXX
|
||||||
|
|
@ -7640,7 +7316,7 @@ remaining_times = 1
|
||||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||||
retract_lift_below = 209
|
retract_lift_below = 209
|
||||||
max_print_height = 210
|
max_print_height = 210
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
||||||
printer_model = MK3
|
printer_model = MK3
|
||||||
default_print_profile = 0.15mm QUALITY @MK3
|
default_print_profile = 0.15mm QUALITY @MK3
|
||||||
|
|
||||||
|
|
@ -7651,7 +7327,7 @@ max_layer_height = 0.15
|
||||||
min_layer_height = 0.05
|
min_layer_height = 0.05
|
||||||
printer_variant = 0.25
|
printer_variant = 0.25
|
||||||
retract_lift = 0.15
|
retract_lift = 0.15
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
||||||
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7661,7 +7337,7 @@ nozzle_diameter = 0.6
|
||||||
max_layer_height = 0.40
|
max_layer_height = 0.40
|
||||||
min_layer_height = 0.15
|
min_layer_height = 0.15
|
||||||
printer_variant = 0.6
|
printer_variant = 0.6
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7672,7 +7348,7 @@ max_layer_height = 0.6
|
||||||
min_layer_height = 0.2
|
min_layer_height = 0.2
|
||||||
printer_variant = 0.8
|
printer_variant = 0.8
|
||||||
retract_length = 1
|
retract_length = 1
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
default_filament_profile = Prusament PLA @0.8 nozzle
|
default_filament_profile = Prusament PLA @0.8 nozzle
|
||||||
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
||||||
|
|
@ -7681,13 +7357,13 @@ color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
||||||
inherits = Original Prusa i3 MK3
|
inherits = Original Prusa i3 MK3
|
||||||
renamed_from = "Original Prusa i3 MK3S"
|
renamed_from = "Original Prusa i3 MK3S"
|
||||||
printer_model = MK3S
|
printer_model = MK3S
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle]
|
[printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle]
|
||||||
inherits = Original Prusa i3 MK3 0.25 nozzle
|
inherits = Original Prusa i3 MK3 0.25 nozzle
|
||||||
renamed_from = "Original Prusa i3 MK3S 0.25 nozzle"
|
renamed_from = "Original Prusa i3 MK3S 0.25 nozzle"
|
||||||
printer_model = MK3S
|
printer_model = MK3S
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle]
|
[printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle]
|
||||||
inherits = Original Prusa i3 MK3 0.6 nozzle
|
inherits = Original Prusa i3 MK3 0.6 nozzle
|
||||||
|
|
@ -7726,7 +7402,7 @@ default_filament_profile = Prusament PLA @MMU2
|
||||||
inherits = *mm2*
|
inherits = *mm2*
|
||||||
single_extruder_multi_material = 0
|
single_extruder_multi_material = 0
|
||||||
default_filament_profile = Prusament PLA
|
default_filament_profile = Prusament PLA
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
||||||
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
|
[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
|
||||||
|
|
@ -7736,7 +7412,7 @@ nozzle_diameter = 0.6
|
||||||
max_layer_height = 0.40
|
max_layer_height = 0.40
|
||||||
min_layer_height = 0.15
|
min_layer_height = 0.15
|
||||||
printer_variant = 0.6
|
printer_variant = 0.6
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7748,7 +7424,7 @@ max_layer_height = 0.6
|
||||||
min_layer_height = 0.2
|
min_layer_height = 0.2
|
||||||
printer_variant = 0.8
|
printer_variant = 0.8
|
||||||
retract_length = 1
|
retract_length = 1
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
default_filament_profile = Prusament PLA @0.8 nozzle
|
default_filament_profile = Prusament PLA @0.8 nozzle
|
||||||
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
||||||
|
|
@ -7761,7 +7437,7 @@ max_layer_height = 0.15
|
||||||
min_layer_height = 0.05
|
min_layer_height = 0.05
|
||||||
printer_variant = 0.25
|
printer_variant = 0.25
|
||||||
retract_lift = 0.15
|
retract_lift = 0.15
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
||||||
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7773,7 +7449,7 @@ inherits = *mm2*
|
||||||
machine_max_acceleration_e = 8000,8000
|
machine_max_acceleration_e = 8000,8000
|
||||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||||
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
||||||
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
|
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
|
[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
|
||||||
|
|
@ -7781,7 +7457,7 @@ inherits = *mm2s*
|
||||||
renamed_from = "Original Prusa i3 MK3S MMU2S Single"
|
renamed_from = "Original Prusa i3 MK3S MMU2S Single"
|
||||||
single_extruder_multi_material = 0
|
single_extruder_multi_material = 0
|
||||||
default_filament_profile = Prusament PLA
|
default_filament_profile = Prusament PLA
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
||||||
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
|
||||||
|
|
||||||
[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
|
[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
|
||||||
|
|
@ -7792,7 +7468,7 @@ nozzle_diameter = 0.6
|
||||||
max_layer_height = 0.40
|
max_layer_height = 0.40
|
||||||
min_layer_height = 0.15
|
min_layer_height = 0.15
|
||||||
printer_variant = 0.6
|
printer_variant = 0.6
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7804,7 +7480,7 @@ max_layer_height = 0.6
|
||||||
min_layer_height = 0.2
|
min_layer_height = 0.2
|
||||||
printer_variant = 0.8
|
printer_variant = 0.8
|
||||||
retract_length = 1
|
retract_length = 1
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
default_filament_profile = Prusament PLA @0.8 nozzle
|
default_filament_profile = Prusament PLA @0.8 nozzle
|
||||||
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
||||||
|
|
@ -7818,7 +7494,7 @@ max_layer_height = 0.15
|
||||||
min_layer_height = 0.05
|
min_layer_height = 0.05
|
||||||
printer_variant = 0.25
|
printer_variant = 0.25
|
||||||
retract_lift = 0.15
|
retract_lift = 0.15
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
|
||||||
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7828,7 +7504,7 @@ renamed_from = "Original Prusa i3 MK3S MMU2S"
|
||||||
machine_max_acceleration_e = 8000,8000
|
machine_max_acceleration_e = 8000,8000
|
||||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||||
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
||||||
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
|
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
|
||||||
|
|
||||||
## 0.6mm nozzle MMU2/S printer profiles
|
## 0.6mm nozzle MMU2/S printer profiles
|
||||||
|
|
@ -7840,7 +7516,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
||||||
max_layer_height = 0.40
|
max_layer_height = 0.40
|
||||||
min_layer_height = 0.15
|
min_layer_height = 0.15
|
||||||
printer_variant = 0.6
|
printer_variant = 0.6
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7850,7 +7526,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
||||||
max_layer_height = 0.40
|
max_layer_height = 0.40
|
||||||
min_layer_height = 0.15
|
min_layer_height = 0.15
|
||||||
printer_variant = 0.6
|
printer_variant = 0.6
|
||||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
||||||
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
|
|
||||||
|
|
@ -7864,7 +7540,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
## max_layer_height = 0.6
|
## max_layer_height = 0.6
|
||||||
## min_layer_height = 0.2
|
## min_layer_height = 0.2
|
||||||
## printer_variant = 0.8
|
## printer_variant = 0.8
|
||||||
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
|
|
||||||
## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle]
|
## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle]
|
||||||
|
|
@ -7873,7 +7549,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
||||||
## max_layer_height = 0.6
|
## max_layer_height = 0.6
|
||||||
## min_layer_height = 0.2
|
## min_layer_height = 0.2
|
||||||
## printer_variant = 0.8
|
## printer_variant = 0.8
|
||||||
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
|
||||||
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
|
||||||
|
|
||||||
## MINI
|
## MINI
|
||||||
|
|
|
||||||
|
|
@ -1,10 +1,3 @@
|
||||||
min_slic3r_version = 2.4.0-rc
|
|
||||||
1.4.2 Added SLA material profiles.
|
|
||||||
1.4.1 Updated firmware version.
|
|
||||||
1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
|
|
||||||
min_slic3r_version = 2.4.0-beta2
|
|
||||||
1.4.0-beta3 Added material profiles for Prusament Resins.
|
|
||||||
1.4.0-beta2 Added SLA material colors. Updated BASF filament profiles.
|
|
||||||
min_slic3r_version = 2.4.0-beta0
|
min_slic3r_version = 2.4.0-beta0
|
||||||
1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI.
|
1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI.
|
||||||
1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
|
1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
|
||||||
|
|
@ -22,15 +15,11 @@ min_slic3r_version = 2.4.0-alpha0
|
||||||
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
||||||
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
min_slic3r_version = 2.3.2-alpha0
|
||||||
1.3.6 Updated firmware version.
|
|
||||||
1.3.5 Added material profiles for Prusament Resins.
|
|
||||||
1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
|
|
||||||
1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
|
1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
|
||||||
1.3.2 Added material profiles for Prusament Resin.
|
1.3.2 Added material profiles for Prusament Resin.
|
||||||
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
||||||
1.3.0 Added SL1S SPEED profiles.
|
1.3.0 Added SL1S SPEED profiles.
|
||||||
min_slic3r_version = 2.3.0-rc1
|
min_slic3r_version = 2.3.0-rc1
|
||||||
1.2.11 Updated firmware version.
|
|
||||||
1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
|
1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
|
||||||
1.2.9 Added material profiles for Prusament Resin.
|
1.2.9 Added material profiles for Prusament Resin.
|
||||||
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
||||||
|
|
@ -50,7 +39,6 @@ min_slic3r_version = 2.3.0-alpha4
|
||||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||||
1.2.0-alpha0 Added filament spool weights
|
1.2.0-alpha0 Added filament spool weights
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
min_slic3r_version = 2.2.0-alpha3
|
||||||
1.1.15 Updated firmware version.
|
|
||||||
1.1.14 Updated firmware version.
|
1.1.14 Updated firmware version.
|
||||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||||
|
|
|
||||||
|
|
@ -1,8 +1,12 @@
|
||||||
// some basic 2d-to-3d-extrusion of Vectorfiles
|
// some basic 2d-to-3d-extrusion of Vectorfiles
|
||||||
|
// by zeus - zeus@ctdo.de - CC-BY-NC-4.0
|
||||||
|
// -> https://www.thingiverse.com/zeus
|
||||||
|
// -> https://git.kostianix.de/zeus/3d-stuff
|
||||||
|
// 2021-02-18
|
||||||
// ###############
|
// ###############
|
||||||
h=4; //height
|
h=4; //height
|
||||||
w=25; //width
|
w=25; //width
|
||||||
l=95; //lenght
|
l=90; //lenght
|
||||||
hd=10; //hole_dia
|
hd=10; //hole_dia
|
||||||
emd=1; // embossing depth
|
emd=1; // embossing depth
|
||||||
$fn=100; //resolution
|
$fn=100; //resolution
|
||||||
|
|
@ -15,9 +19,9 @@ difference(){
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
translate([w/4,0,h-emd]){
|
translate([w/4,0,h-emd]){
|
||||||
scale([0.4,0.4,1]){
|
scale([0.3,0.3,1]){
|
||||||
linear_extrude(height = h/2*1){
|
linear_extrude(height = h/2*1){
|
||||||
import("src/GONICUS-Logo_2022_logo-only.svg",center=true);
|
import("src/gonicus_clean.svg",center=true);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
|
||||||
Binary file not shown.
|
Before Width: | Height: | Size: 23 KiB |
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 8.7 KiB |
|
|
@ -1,86 +0,0 @@
|
||||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
|
||||||
<svg
|
|
||||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
|
||||||
xmlns:cc="http://creativecommons.org/ns#"
|
|
||||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
|
||||||
xmlns:svg="http://www.w3.org/2000/svg"
|
|
||||||
xmlns="http://www.w3.org/2000/svg"
|
|
||||||
xmlns:xlink="http://www.w3.org/1999/xlink"
|
|
||||||
xml:space="preserve"
|
|
||||||
style="enable-background:new 0 0 841.89 595.28;"
|
|
||||||
viewBox="0 0 841.89 595.28"
|
|
||||||
y="0px"
|
|
||||||
x="0px"
|
|
||||||
id="Ebene_1"
|
|
||||||
version="1.1"><metadata
|
|
||||||
id="metadata33"><rdf:RDF><cc:Work
|
|
||||||
rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
|
|
||||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
|
|
||||||
id="defs31">
|
|
||||||
<defs
|
|
||||||
id="defs7">
|
|
||||||
<rect
|
|
||||||
id="SVGID_1_"
|
|
||||||
x="148"
|
|
||||||
y="229.71"
|
|
||||||
width="540.95"
|
|
||||||
height="136.57" />
|
|
||||||
</defs>
|
|
||||||
<clipPath
|
|
||||||
id="SVGID_2_">
|
|
||||||
<use
|
|
||||||
xlink:href="#SVGID_1_"
|
|
||||||
style="overflow:visible;"
|
|
||||||
id="use9" />
|
|
||||||
</clipPath>
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
</defs>
|
|
||||||
<style
|
|
||||||
id="style2"
|
|
||||||
type="text/css">
|
|
||||||
.st0{fill:#213A8F;}
|
|
||||||
.st1{clip-path:url(#SVGID_2_);fill:#213A8F;}
|
|
||||||
</style>
|
|
||||||
|
|
||||||
<g
|
|
||||||
id="g861"><path
|
|
||||||
class="st0"
|
|
||||||
d="M415.1,265.77l-10.5,58.68h26.88l10.5-58.68H415.1z M421.55,229.71l-4.13,23.06h26.87l4.13-23.06H421.55z"
|
|
||||||
id="path4" /><path
|
|
||||||
style="fill:#213a8f"
|
|
||||||
id="path12"
|
|
||||||
clip-path="url(#SVGID_2_)"
|
|
||||||
d="m 316.76,324.45 17.09,-94.74 h 48.44 c 0,0 8.38,0.03 13.97,4.53 5.59,4.5 7.09,10.56 7.56,13.88 0.47,3.31 0.53,7.13 -0.63,13.56 -1.16,6.44 -11.31,62.78 -11.31,62.78 h -26.81 l 11.56,-64.41 c 0,0 2.03,-7.16 -6.41,-7.22 -8.44,-0.06 -13.69,-0.06 -13.69,-0.06 l -12.88,71.69 h -26.89 z"
|
|
||||||
class="st1" /><path
|
|
||||||
style="fill:#213a8f"
|
|
||||||
id="path14"
|
|
||||||
clip-path="url(#SVGID_2_)"
|
|
||||||
d="m 622.67,229.71 -17.09,94.74 h -48.44 c 0,0 -8.16,-0.31 -13.97,-4.53 -5.85,-4.26 -7.41,-9.26 -7.88,-12.57 -0.47,-3.31 -0.22,-8.43 0.94,-14.87 1.16,-6.44 11.31,-62.78 11.31,-62.78 h 26.81 l -11.56,64.41 c 0,0 -1.04,7.12 6.41,7.22 8.44,0.11 13.69,0.06 13.69,0.06 l 12.88,-71.69 h 26.9 z"
|
|
||||||
class="st1" /><path
|
|
||||||
style="fill:#213a8f"
|
|
||||||
id="path16"
|
|
||||||
clip-path="url(#SVGID_2_)"
|
|
||||||
d="m 637.22,229.71 h 26.94 c 0,0 -4.98,6.61 0.88,15.46 0,0 17.58,28.39 19.41,31.26 8.35,13.12 4.81,29.5 -8.09,38.49 -8.31,5.79 -15.69,8.75 -30.65,9.73 -7.79,0.51 -31.42,-0.2 -31.42,-0.2 l 4.19,-23.16 c 0,0 20.67,-0.04 22.98,-0.17 7.54,-0.42 12.41,-2.54 14.94,-7.95 2.51,-5.38 -1.07,-11.46 -4.07,-15.71 0,0 -15.42,-23.59 -16.17,-24.98 -0.75,-1.39 -3.92,-5.98 -2.92,-12.56 0.95,-6.23 3.98,-10.21 3.98,-10.21"
|
|
||||||
class="st1" /><path
|
|
||||||
style="fill:#213a8f"
|
|
||||||
id="path18"
|
|
||||||
clip-path="url(#SVGID_2_)"
|
|
||||||
d="m 203.5,260.25 c 0,0 2.03,-7.16 -6.41,-7.22 -4.3,-0.03 -7.77,-0.04 -10.15,-0.05 -3.71,0 -4.06,3.56 -4.06,3.56 l -6.78,37.77 c 0,0 -1.04,7.12 6.41,7.22 4.18,0.06 7.59,0.08 9.95,0.08 3.71,0 4.11,-2.82 4.23,-3.47 0.12,-0.66 0.88,-4.88 0.88,-4.88 h -13.15 l 3.14,-18.67 h 13.36 -0.09 26.84 c -1.51,8.37 -3.38,19.27 -5.11,28.85 -3.27,16.35 -15.77,21.21 -26.93,21.21 h -25.18 c 0,0 -8.17,-0.3 -13.97,-4.52 -5.86,-4.26 -7.41,-9.26 -7.88,-12.57 -0.47,-3.31 -0.22,-8.43 0.94,-14.87 0.74,-4.12 4.26,-23.66 7.35,-40.81 3.07,-14.14 12.46,-21.97 28.77,-21.97 h 23.49 c 0,0 8.37,0.02 13.97,4.52 5.59,4.5 7.09,10.57 7.56,13.88 0.45,3.23 0.53,6.93 -0.54,13.08 H 203.3 Z"
|
|
||||||
class="st1" /><path
|
|
||||||
style="fill:#213a8f"
|
|
||||||
id="path20"
|
|
||||||
clip-path="url(#SVGID_2_)"
|
|
||||||
d="m 289.97,260.2 -2.58,14.39 c 0,0 -4.14,23.11 -4.22,23.55 -0.12,0.66 -0.52,3.47 -4.23,3.47 -2.36,0 -5.77,-0.02 -9.95,-0.08 -7.45,-0.1 -6.41,-7.22 -6.41,-7.22 l 6.78,-37.77 c 0,0 0.35,-3.56 4.05,-3.56 2.38,0.01 5.85,0.02 10.15,0.05 8.03,0.06 6.41,7.17 6.41,7.17 m 27.19,-11.89 c -0.47,-3.31 -1.97,-9.38 -7.56,-13.88 -5.6,-4.5 -13.97,-4.52 -13.97,-4.52 h -23.49 c -16.31,0 -25.7,7.83 -28.77,21.97 -3.09,17.15 -6.61,36.69 -7.35,40.81 -1.16,6.44 -1.41,11.56 -0.94,14.87 0.47,3.31 2.02,8.31 7.88,12.57 5.8,4.22 13.97,4.52 13.97,4.52 h 25.18 c 11.17,0 23.67,-4.85 26.93,-21.21 1.24,-6.85 2.54,-14.37 3.74,-21.15 l 4.03,-22.09 c 0.87,-5.45 0.77,-8.87 0.35,-11.89"
|
|
||||||
class="st1" /><path
|
|
||||||
style="fill:#213a8f"
|
|
||||||
id="path22"
|
|
||||||
clip-path="url(#SVGID_2_)"
|
|
||||||
d="m 498.56,287.81 c -0.93,5.18 -1.78,9.94 -1.82,10.14 -0.12,0.66 -0.52,3.47 -4.23,3.47 -2.36,0 -5.77,-0.02 -9.95,-0.08 -7.45,-0.1 -6.41,-7.22 -6.41,-7.22 l 6.78,-37.77 c 0,0 0.35,-3.56 4.05,-3.56 2.38,0.01 5.85,0.02 10.15,0.05 8.03,0.06 6.41,7.17 6.41,7.17 l -1.14,6.36 h 26.82 l 1.16,-6.36 c 0.87,-5.45 0.77,-8.87 0.35,-11.89 -0.47,-3.31 -1.97,-9.38 -7.56,-13.88 -5.6,-4.5 -13.97,-4.52 -13.97,-4.52 h -23.49 c -16.31,0 -25.7,7.83 -28.77,21.97 -3.09,17.15 -6.61,36.69 -7.35,40.81 -1.16,6.44 -1.41,11.56 -0.94,14.87 0.47,3.31 2.02,8.31 7.88,12.57 5.8,4.22 13.97,4.52 13.97,4.52 h 25.18 c 11.17,0 23.67,-4.85 26.93,-21.21 0.9,-4.97 1.83,-10.29 2.73,-15.43 h -26.78 z"
|
|
||||||
class="st1" /></g>
|
|
||||||
</svg>
|
|
||||||
|
Before Width: | Height: | Size: 4.8 KiB |
Binary file not shown.
|
|
@ -1,62 +0,0 @@
|
||||||
// auto-lüfterschlitz-einsatz-mopped
|
|
||||||
//#######################################
|
|
||||||
// vars:
|
|
||||||
plate_h=54; // frontplatte, höhe
|
|
||||||
plate_w=196; // frontplatte, breite
|
|
||||||
tab_depth=20; // tiefe der seitlichen flügel
|
|
||||||
mt=3; // materialstärke
|
|
||||||
pin_t=4; // länge des loch-pins
|
|
||||||
hole_dia=9.5; // durchmesser befestigungsloch
|
|
||||||
hole_depth=11.75; // distanz tiefe der befestigungsbohrung, mittenabstand
|
|
||||||
instrument_dia=52; // durchmesser einlass für instrument
|
|
||||||
instrument_count=3; // anzahl einlässe
|
|
||||||
instrument_h=20; // hülsentiefe für einlässe
|
|
||||||
offset=1.5; // x und y überstand der Platte
|
|
||||||
$fn=100; // detailgrad
|
|
||||||
//#######################################
|
|
||||||
// model:
|
|
||||||
|
|
||||||
module plate(){
|
|
||||||
translate([-plate_w/2-offset,-plate_h/2-offset,-mt/2]){
|
|
||||||
cube([plate_w+(2*offset),plate_h+(2*offset),mt]);
|
|
||||||
// left tab
|
|
||||||
translate([offset,2*mt+offset,mt]) {
|
|
||||||
union(){
|
|
||||||
cube([mt,plate_h-4*mt,tab_depth]);
|
|
||||||
translate([-pin_t/2,(plate_h-4*mt)/2,hole_depth])rotate([0,90,0])cylinder(h=pin_t,r=hole_dia/2,center=true);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
// right tab
|
|
||||||
translate([plate_w-offset,2*mt+offset,mt]) {
|
|
||||||
union(){
|
|
||||||
cube([mt,plate_h-4*mt,tab_depth]);
|
|
||||||
translate([pin_t/2+mt,(plate_h-4*mt)/2,hole_depth])rotate([0,90,0])cylinder(h=pin_t,r=hole_dia/2,center=true);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
module insert_hole(){
|
|
||||||
translate([0,0,-mt/2-0.1])cylinder(r=instrument_dia/2+mt/2,h=mt+0.2);
|
|
||||||
}
|
|
||||||
module insert(){
|
|
||||||
difference(){
|
|
||||||
cylinder(r=instrument_dia/2+mt/2,h=instrument_h,center=true);
|
|
||||||
cylinder(r=instrument_dia/2,h=instrument_h+0.1,center=true);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
module complete_model(){
|
|
||||||
plate();
|
|
||||||
}
|
|
||||||
|
|
||||||
difference(){
|
|
||||||
complete_model();
|
|
||||||
insert_hole();
|
|
||||||
translate([plate_w*0.33,0,0])insert_hole();
|
|
||||||
translate([-(plate_w*0.33),0,0])insert_hole();
|
|
||||||
}
|
|
||||||
translate([0,0,instrument_h/2-mt/2]){
|
|
||||||
insert();
|
|
||||||
translate([plate_w*0.33,0,0])insert();
|
|
||||||
translate([-(plate_w*0.33),0,0])insert();
|
|
||||||
}
|
|
||||||
Binary file not shown.
Loading…
Reference in New Issue