// supermicro SC808 (and others) I/O-Shields to be able to utilize mITX-boards with extenation-cords that allow for Surface-Mounting
// by zeus - 2022-09-11 - CC-BY-NC-SA-4.0 - https://git.kostianix.de/zeus/3d-stuff/openscad/
// #####################################
// VARS:
// #####################################
mt=2;
q=0.01; //used as variable to remove manifold-glitches in preview. can be set to "0" in final version
$fn=100;
// shield:
shield_w=178; // let's hope that fits onto my delta...
shield_h=41;
shield_d=10; //around 11.5 in the original, but that is not needed
shield_tab_emboss_d=1; // that lowered lip, that the central and outer tabs mounts onto, 1mm (or one sheet-thickness) lower than the rest
shield_tab_emboss_l=22; // length of the above described cutouts
shield_tab_emboss_l2=shield_tab_emboss_l/2; // length of the side cutouts

shield_holes=1; // draw holes if >0
shield_hole_d1=2.75;
shield_hole_d2=shield_hole_d1+0.5; // slightly conical holes for better inserting
// for separating the shield into two halves
shield_center_slot=1; // draw slot if >0
shield_center_slot_w=0.5;
shield_hole_center_dia=4; 
shield_hole_center_dist=shield_h/2;
// model "gril":
m_gril_h=shield_h-3*mt;
m_gril_w=mt;
m_gril_angle=15;
m_gril_spacing=m_gril_w;

// #####################################
// MODEL:
// mounting holes around the shield perimeter
module shield_hole(x,y,z,rotx,roty){
    translate([x,y,shield_d/2-z])rotate([rotx,roty,0])cylinder(d1=shield_hole_d1,d2=shield_hole_d2,h=mt+q,center=true);
}
// basic shield
module shield(){
    difference(){
        cube([shield_w,shield_h,shield_d],center=true); // basebox
        translate([0,0,mt/2+q])cube([shield_w-2*mt,shield_h-2*mt,shield_d-mt],center=true); // main hollowing
        for(x=[-shield_w/2+shield_tab_emboss_l/2,shield_w/2-shield_tab_emboss_l/2]){ 
            translate([x,shield_h/2-shield_tab_emboss_d/2,0])cube([shield_tab_emboss_l+q,shield_tab_emboss_d+q,shield_d+q],center=true);// top edge-cutout
        }
        for(x=[-shield_w/2+shield_tab_emboss_d/2,shield_w/2-shield_tab_emboss_d/2]){ 
            translate([x,shield_h/2-shield_tab_emboss_l2/2,0])cube([shield_tab_emboss_d+q,shield_tab_emboss_l2+q,shield_d+q],center=true);// side edge-cutout
        }

  }
        for(x=[-shield_w/2+shield_tab_emboss_l/2+mt,shield_w/2-shield_tab_emboss_l/2-mt]){ 
            translate([x,shield_h/2-shield_tab_emboss_d/2-mt,0])cube([shield_tab_emboss_l+mt+q,shield_tab_emboss_d+q,shield_d+q],center=true);// supportblock for top edge-cutout
        for(x=[-shield_w/2+shield_tab_emboss_d/2+shield_tab_emboss_d+mt/2,shield_w/2-shield_tab_emboss_d/2-shield_tab_emboss_d-mt/2]){ 
            translate([x,shield_h/2-shield_tab_emboss_l2/2-mt,0])cube([shield_tab_emboss_d+q,shield_tab_emboss_l2+q,shield_d+q],center=true);// supportblock for side edge-cutout
        }
    }
        cube([mt*4,shield_h,shield_d],center=true); // central support-block
}

// first iteration: optional slotting
module shield_1(){
  if (shield_center_slot>0) { // generate slot and matching connection-holes in the center
    difference(){
        shield();
        #cube([shield_center_slot_w,shield_h+q,shield_d+q],center=true);
        for(y=[-shield_hole_center_dist/2,shield_hole_center_dist/2]){
            translate([0,y,mt/2])rotate([0,90,0])#cylinder(d=shield_hole_center_dia,h=mt*4+q,center=true);
        }
    }
}
else shield();  
}

// second iteration: add some holes
module shield_2(){
    difference(){
        shield_1();
        if (shield_holes>0) {
            // some holes all around, (left, than clockwise, viewed from behind) 
            // shield_hole(x,y,z,rotx,roty), "z" is the distance from lip-edge to the center of the hole, x is from center
            shield_hole(-shield_w/2+mt/2,-0.5,4,0,-90); //left side
            shield_hole(-shield_w/2+mt/2+4.5,shield_h/2-shield_tab_emboss_d-mt/2-q*0.5,6.25,-90,0); //top side, 1st from left (recessed)
            shield_hole(-shield_w/2+mt/2+29.5,shield_h/2-mt/2,4.4,-90,0); //top side, 2nd from left 
            shield_hole(-shield_w/2+mt/2+148.5,shield_h/2-mt/2,4.4,-90,0); //top side, 3rd from left
            shield_hole(-shield_w/2+mt/2+162,shield_h/2-shield_tab_emboss_d-mt/2-q*0.5,5.5,-90,0); //top side, 4th from left (recessed)
            shield_hole(-shield_w/2+mt/2+173,shield_h/2-shield_tab_emboss_d-mt/2-q*0.5,6.25,-90,0); //top side, 5th from left (recessed)
            shield_hole(shield_w/2-mt/2,-0.5,4,0,90); //right side
            shield_hole(-shield_w/2+mt/2+173,-shield_h/2+mt/2,4.25,90,0); // bottom side, 1st one from right
            shield_hole(-shield_w/2+mt/2+56.25,-shield_h/2+mt/2,4.25,90,0); //bottom side, 2nd one from right
            shield_hole(-shield_w/2+mt/2+4.5,-shield_h/2+mt/2,4.25,90,0); //bottom side, 3rd one from right
        }
    }
}
// #####################################
// DRAWING:

difference(){
    shield_2();
    translate([0,0,6])cube([200,100,5],center=true);
    translate([0,0,-5.45])cube([200,100,5],center=true);
}






// todo: 
// shield holes durchgängig
// seitlicher tab hinzufügen, loch beachten!