3d-stuff/openscad/own/supermicro_sc808t/hdd-holder/box.scad

83 lines
2.6 KiB
OpenSCAD

/**
* Model that draws a box that can have screws and slots and that can be used as a negative on another box and obtain the difference.
* can be used as a negative on another box and obtain the difference.
*
* @author Joaquín Fernández
* @url https://gitlab.com/joaquinfq/openscad/blob/master/Modules/Models/box.scad
* @license CC-BY-NC-4.0
*
* @ @param {Float} width Width of the model to generate.
* @ @param {Float} height Height of the model to generate.
* @param {Float} length Length of the model to be generated.
* @param {Float} thickness Thickness of the block where the model will be inserted.
* @param {Float} screw Diameter of the screw to be used.
* @param {Float} slot Length of the slot where the screws will be inserted.
* @param {Float} tolerance Value to be used to adjust the standard dimensions.
* @param {Float[]} side Coordinates of the side holes.
* @param {Float[]} bottom Coordinates of the bottom holes.
*/
module modelBox(width, height, length, thickness, screw = 0, slot = 0, side = [], bottom = [])
{
cube([ width, height, length ]);
// Side holes
for (_side = side)
{
if (slot)
{
hull()
{
for (_n = [ - slot / 2, slot / 2 ])
{
translate([ width / 2, _side[0], _side[1] + _n ])
{
rotate([ 0, 90, 0 ])
{
cylinder(d = screw, h = width + thickness * 2, center = true);
}
}
}
}
}
else
{
translate([ width / 2, _side[0], _side[1] ])
{
rotate([ 0, 90, 0 ])
{
cylinder(d = screw, h = width + thickness * 2, center = true);
}
}
}
}
// Bottom holes
for (_bottom = bottom)
{
if (slot)
{
hull()
{
for (_n = [ - slot / 2, slot / 2 ])
{
translate([ width - _bottom[0], 0, _bottom[1] + _n ])
{
rotate([ 90, 0, 0 ])
{
cylinder(d = screw, h = thickness);
}
}
}
}
}
else
{
translate([ width - _bottom[0], 0, _bottom[1] ])
{
rotate([ 90, 0, 0 ])
{
cylinder(d = screw, h = thickness);
}
}
}
}
}