compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
infill_extrusion_width=0.5
# MK3 #
[print:0.05mm ULTRADETAIL @MK3]
inherits=*0.05mm*; *MK3*
fill_pattern=gyroid
fill_density=15%
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width=0.4
# MK2 #
[print:0.05mm ULTRADETAIL @0.25 nozzle]
inherits=*0.05mm*; *0.25nozzle*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_density=20%
infill_speed=20
max_print_speed=100
perimeter_speed=20
small_perimeter_speed=15
solid_infill_speed=20
support_material_speed=20
# MK3 #
[print:0.05mm ULTRADETAIL @0.25 nozzle MK3]
inherits=*0.05mm*; *0.25nozzle*; *MK3*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width=0.4
[print:0.07mm ULTRADETAIL @0.25 nozzle MK3]
inherits=*0.07mm*; *0.25nozzle*; *MK3*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
infill_speed=30
solid_infill_speed=30
support_material_speed=30
top_solid_infill_speed=20
fill_pattern=grid
fill_density=20%
# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.10mm ---XXX
# XXXXXXXXXXXXXXXXXXXX
# MK2 #
[print:*0.10mm*]
inherits=*common*
bottom_solid_layers=7
bridge_flow_ratio=0.7
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
layer_height=0.1
perimeter_acceleration=800
top_solid_layers=9
# MK2 #
[print:0.10mm DETAIL]
inherits=*0.10mm*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
external_perimeter_speed=40
infill_acceleration=2000
infill_speed=60
perimeter_speed=50
solid_infill_speed=50
perimeters=3
# MK3 #
[print:0.10mm DETAIL @MK3]
inherits=*0.10mm*; *MK3*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=25
infill_acceleration=1000
infill_speed=80
max_print_speed=200
perimeter_speed=45
solid_infill_speed=80
top_infill_extrusion_width=0.4
top_solid_infill_speed=40
fill_pattern=gyroid
fill_density=15%
perimeters=3
# MK2 #
[print:0.10mm DETAIL @0.25 nozzle]
inherits=*0.10mm*; *0.25nozzle*
bridge_acceleration=600
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed=20
infill_acceleration=1000
infill_speed=40
perimeter_acceleration=600
perimeter_speed=25
small_perimeter_speed=15
solid_infill_speed=40
top_solid_infill_speed=30
# MK3 #
[print:0.10mm DETAIL @0.25 nozzle MK3]
inherits=*0.10mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=50
infill_speed=100
max_print_speed=150
perimeter_speed=60
small_perimeter_speed=30
solid_infill_speed=100
support_material_speed=60
top_solid_infill_speed=70
# MK2 #
[print:0.15mm OPTIMAL]
inherits=*0.15mm*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
top_infill_extrusion_width=0.45
# MK2 #
[print:0.15mm OPTIMAL @0.25 nozzle]
inherits=*0.15mm*; *0.25nozzle*
bridge_acceleration=600
bridge_flow_ratio=0.7
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed=20
infill_acceleration=1000
infill_speed=40
perimeter_acceleration=600
perimeter_speed=25
small_perimeter_speed=15
solid_infill_speed=40
top_solid_infill_speed=30
# MK2 #
[print:0.15mm OPTIMAL @0.6 nozzle]
inherits=*0.15mm*; *0.6nozzle*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
# MK3 #
[print:0.15mm QUALITY @MK3]
inherits=*0.15mm*; *MK3*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=25
infill_acceleration=1000
infill_speed=80
max_print_speed=200
perimeter_speed=45
solid_infill_speed=80
top_solid_infill_speed=40
fill_pattern=gyroid
fill_density=15%
[print:0.15mm SPEED @MK3]
inherits=*0.15mm*; *MK3*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=35
infill_acceleration=1000
infill_speed=200
max_print_speed=200
perimeter_speed=60
solid_infill_speed=200
top_solid_infill_speed=50
# MK3 MMU #
[print:0.15mm SOLUBLE FULL @MK3]
inherits=0.15mm SPEED @MK3; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes=Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
support_material_extruder=5
support_material_interface_extruder=5
perimeter_speed=40
solid_infill_speed=40
infill_speed=80
top_infill_extrusion_width=0.45
top_solid_infill_speed=30
support_material_speed=45
# MK3 MMU #
[print:0.15mm SOLUBLE INTERFACE @MK3]
inherits=0.15mm SOLUBLE FULL @MK3
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
support_material_extruder=0
support_material_interface_layers=3
support_material_with_sheath=0
# MK2 MMU #
[print:0.15mm OPTIMAL SOLUBLE FULL]
inherits=*0.15mm*; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed=25
notes=Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
perimeter_speed=40
solid_infill_speed=40
top_infill_extrusion_width=0.45
top_solid_infill_speed=30
# MK2 MMU #
[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
inherits=0.15mm OPTIMAL SOLUBLE FULL
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
support_material_extruder=0
support_material_interface_layers=3
support_material_with_sheath=0
support_material_xy_spacing=80%
# MK3 #
[print:0.15mm QUALITY @0.25 nozzle MK3]
inherits=*0.15mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern=grid
fill_density=20%
# MK3 #
[print:0.15mm DETAIL @0.6 nozzle MK3]
inherits=*0.15mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=50
infill_speed=100
max_print_speed=150
perimeter_speed=60
small_perimeter_speed=30
solid_infill_speed=100
support_material_speed=60
top_solid_infill_speed=70
# MK3 #
[print:0.20mm QUALITY @MK3]
inherits=*0.20mm*; *MK3*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=25
infill_acceleration=1000
infill_speed=80
max_print_speed=200
perimeter_speed=45
solid_infill_speed=80
top_solid_infill_speed=40
fill_pattern=gyroid
fill_density=15%
[print:0.20mm SPEED @MK3]
inherits=*0.20mm*; *MK3*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=35
infill_acceleration=1000
infill_speed=200
max_print_speed=200
perimeter_speed=60
solid_infill_speed=200
top_solid_infill_speed=50
# MK3 MMU #
[print:0.20mm SOLUBLE FULL @MK3]
inherits=0.20mm SPEED @MK3; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes=Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
support_material_extruder=5
support_material_interface_extruder=5
perimeter_speed=40
solid_infill_speed=40
infill_speed=80
top_infill_extrusion_width=0.45
top_solid_infill_speed=30
support_material_speed=45
# MK3 MMU #
[print:0.20mm SOLUBLE INTERFACE @MK3]
inherits=0.20mm SOLUBLE FULL @MK3
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
support_material_extruder=0
support_material_interface_layers=3
support_material_with_sheath=0
# MK2 #
[print:0.20mm NORMAL]
inherits=*0.20mm*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
# MK2 #
[print:0.20mm NORMAL @0.6 nozzle]
inherits=*0.20mm*; *0.6nozzle*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
# MK2 MMU #
[print:0.20mm NORMAL SOLUBLE FULL]
inherits=*0.20mm*; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed=30
notes=Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
perimeter_speed=40
solid_infill_speed=40
top_solid_infill_speed=30
# MK2 MMU #
[print:0.20mm NORMAL SOLUBLE INTERFACE]
inherits=0.20mm NORMAL SOLUBLE FULL
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
support_material_extruder=0
support_material_interface_layers=3
support_material_with_sheath=0
support_material_xy_spacing=80%
# MK3 #
[print:0.20mm DETAIL @0.6 nozzle MK3]
inherits=*0.20mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed=35
infill_acceleration=1000
infill_speed=70
max_print_speed=100
perimeter_speed=45
solid_infill_speed=70
top_solid_infill_speed=45
# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.25mm ---XXX
# XXXXXXXXXXXXXXXXXXXX
[print:*0.25mm*]
inherits=*common*
bottom_solid_layers=4
bridge_flow_ratio=0.95
external_perimeter_speed=40
perimeter_acceleration=800
layer_height=0.25
perimeter_speed=50
top_solid_layers=4
# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.30mm ---XXX
# XXXXXXXXXXXXXXXXXXXX
[print:*0.30mm*]
inherits=*common*
bottom_solid_layers=4
bridge_flow_ratio=0.95
external_perimeter_speed=40
infill_acceleration=2000
infill_speed=60
layer_height=0.3
perimeter_acceleration=800
perimeter_speed=50
solid_infill_speed=50
top_infill_extrusion_width=0.4
top_solid_layers=4
[print:0.30mm QUALITY @0.6 nozzle MK3]
inherits=*0.30mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
notes=Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
support_material_extruder=5
support_material_interface_extruder=5
support_material_speed=40
perimeter_speed=40
solid_infill_speed=40
top_infill_extrusion_width=0.6
support_material_extrusion_width=0.6
top_solid_infill_speed=30
support_material_xy_spacing=80%
[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3]
inherits=0.30mm SOLUBLE FULL @0.6 nozzle MK3
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
support_material_extruder=0
support_material_interface_layers=3
support_material_with_sheath=0
[print:0.30mm DRAFT @MK3]
inherits=*0.30mm*; *MK3*
bottom_solid_layers=3
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=35
infill_acceleration=1000
infill_speed=85
max_print_speed=200
perimeter_speed=50
small_perimeter_speed=30
solid_infill_speed=80
top_solid_infill_speed=40
support_material_speed=45
external_perimeter_extrusion_width=0.6
extrusion_width=0.5
first_layer_extrusion_width=0.42
infill_extrusion_width=0.5
perimeter_extrusion_width=0.5
solid_infill_extrusion_width=0.5
top_infill_extrusion_width=0.45
support_material_extrusion_width=0.38
# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.35mm ---XXX
# XXXXXXXXXXXXXXXXXXXX
[print:*0.35mm*]
inherits=*common*
bottom_solid_layers=3
external_perimeter_extrusion_width=0.6
external_perimeter_speed=40
first_layer_extrusion_width=0.75
infill_acceleration=2000
infill_speed=60
layer_height=0.35
perimeter_acceleration=800
perimeter_extrusion_width=0.65
perimeter_speed=50
solid_infill_extrusion_width=0.65
solid_infill_speed=60
top_solid_infill_speed=50
top_solid_layers=4
# MK2 #
[print:0.35mm FAST]
inherits=*0.35mm*
bridge_flow_ratio=0.95
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
# MK2.5 #
[print:0.15mm OPTIMAL @MK2.5]
inherits=0.15mm OPTIMAL
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
# MK2.5 MMU2 #
[print:0.10mm DETAIL @MK2.5]
inherits=0.10mm DETAIL
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming=0
# MK2.5 MMU2 #
[print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5]
inherits=0.15mm OPTIMAL SOLUBLE FULL
support_material_extruder=5
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
# MK2.5 MMU2 #
[print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5]
inherits=0.15mm OPTIMAL SOLUBLE INTERFACE
support_material_extruder=0
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
# MK2.5 #
[print:0.20mm NORMAL @MK2.5]
inherits=0.20mm NORMAL
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
# MK2.5 MMU2 #
[print:0.20mm NORMAL SOLUBLE FULL @MK2.5]
inherits=0.20mm NORMAL SOLUBLE FULL
support_material_extruder=5
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming=0
# MK2.5 MMU2 #
[print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5]
inherits=0.20mm NORMAL SOLUBLE INTERFACE
support_material_extruder=0
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming=0
# MK2.5 #
[print:0.35mm FAST @MK2.5]
inherits=0.35mm FAST
# alias = 0.35mm FAST
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
# MK2.5 MMU2 0.6 nozzle #
[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5]
inherits=*0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width=0.6
external_perimeter_speed=30
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed=40
external_perimeter_speed=30
infill_speed=80
solid_infill_speed=80
top_infill_extrusion_width=0.4
top_solid_infill_speed=40
fill_pattern=gyroid
fill_density=15%
perimeters=3
bridge_acceleration=1000
support_material_xy_spacing=60%
[print:0.15mm QUALITY @MINI]
inherits=*0.15mm*; *MINI*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed=40
external_perimeter_speed=30
infill_speed=80
solid_infill_speed=80
top_solid_infill_speed=40
fill_pattern=gyroid
fill_density=15%
bridge_flow_ratio=0.85
support_material_xy_spacing=60%
[print:0.15mm SPEED @MINI]
inherits=*0.15mm*; *MINI*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed=50
external_perimeter_speed=40
infill_speed=140
solid_infill_speed=140
top_solid_infill_speed=40
bridge_flow_ratio=0.85
support_material_xy_spacing=60%
[print:0.20mm QUALITY @MINI]
inherits=*0.20mm*; *MINI*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed=40
external_perimeter_speed=30
infill_speed=80
solid_infill_speed=80
top_solid_infill_speed=40
fill_pattern=gyroid
fill_density=15%
support_material_xy_spacing=60%
[print:0.20mm SPEED @MINI]
inherits=*0.20mm*; *MINI*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed=50
external_perimeter_speed=40
infill_speed=140
max_print_speed=150
solid_infill_speed=140
top_solid_infill_speed=40
support_material_xy_spacing=60%
[print:0.25mm DRAFT @MINI]
inherits=*0.25mm*; *MINI*
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=40
infill_speed=110
perimeter_speed=55
small_perimeter_speed=25
solid_infill_speed=100
top_solid_infill_speed=45
first_layer_extrusion_width=0.42
infill_extrusion_width=0.45
solid_infill_extrusion_width=0.45
top_infill_extrusion_width=0.4
support_material_xy_spacing=60%
# 0.25mm nozzle
[print:0.05mm ULTRADETAIL @0.25 nozzle MINI]
inherits=*0.05mm*; *0.25nozzle*; *MINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern=grid
fill_density=20%
support_material_speed=30
[print:0.07mm ULTRADETAIL @0.25 nozzle MINI]
inherits=*0.07mm*; *0.25nozzle*; *MINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
infill_speed=30
solid_infill_speed=30
support_material_speed=30
top_solid_infill_speed=20
fill_pattern=grid
fill_density=20%
[print:0.10mm DETAIL @0.25 nozzle MINI]
inherits=*0.10mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern=grid
fill_density=20%
[print:0.15mm QUALITY @0.25 nozzle MINI]
inherits=*0.15mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern=grid
fill_density=20%
# 0.6mm nozzle MINI
[print:0.15mm DETAIL @0.6 nozzle MINI]
inherits=*0.15mm*; *0.6nozzleMINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed=35
infill_speed=70
max_print_speed=100
perimeter_speed=45
solid_infill_speed=70
top_solid_infill_speed=45
infill_extrusion_width=0.65
solid_infill_extrusion_width=0.65
[print:0.20mm DETAIL @0.6 nozzle MINI]
inherits=*0.20mm*; *0.6nozzleMINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed=35
infill_speed=70
max_print_speed=100
perimeter_speed=45
solid_infill_speed=70
top_solid_infill_speed=45
infill_extrusion_width=0.65
solid_infill_extrusion_width=0.65
[print:0.30mm QUALITY @0.6 nozzle MINI]
inherits=*0.30mm*; *0.6nozzleMINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed=35
infill_speed=65
max_print_speed=100
perimeter_speed=45
solid_infill_speed=65
top_solid_infill_speed=45
external_perimeter_extrusion_width=0.68
perimeter_extrusion_width=0.68
[print:0.35mm SPEED @0.6 nozzle MINI]
inherits=*0.35mm*; *0.6nozzleMINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed=35
infill_speed=60
max_print_speed=100
perimeter_speed=45
solid_infill_speed=60
top_solid_infill_speed=45
external_perimeter_extrusion_width=0.68
perimeter_extrusion_width=0.68
[print:0.40mm DRAFT @0.6 nozzle MINI]
inherits=*0.40mm*; *0.6nozzleMINI*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed=35
infill_speed=50
max_print_speed=100
perimeter_speed=45
solid_infill_speed=50
top_solid_infill_speed=45
external_perimeter_extrusion_width=0.68
perimeter_extrusion_width=0.68
infill_extrusion_width=0.68
solid_infill_extrusion_width=0.68
# 0.8mm nozzle MINI
[print:0.30mm DETAIL @0.8 nozzle MINI]
inherits=0.30mm DETAIL @0.8 nozzle
compatible_printers_condition=printer_model=="MINI" and nozzle_diameter[0]==0.8
perimeter_speed=35
external_perimeter_speed=25
infill_acceleration=1000
infill_speed=50
max_print_speed=80
solid_infill_speed=45
top_solid_infill_speed=35
support_material_speed=40
travel_speed=150
[print:0.40mm QUALITY @0.8 nozzle MINI]
inherits=0.40mm QUALITY @0.8 nozzle
compatible_printers_condition=printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_speed=40
max_print_speed=50
solid_infill_speed=40
top_solid_infill_speed=30
support_material_speed=40
travel_speed=150
[print:0.55mm DRAFT @0.8 nozzle MINI]
inherits=0.55mm DRAFT @0.8 nozzle
compatible_printers_condition=printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_acceleration=1000
infill_speed=40
solid_infill_speed=40
support_material_speed=35
support_material_contact_distance=0.25
top_solid_infill_speed=28
external_perimeter_extrusion_width=1
perimeter_extrusion_width=1
travel_speed=150
# XXXXXXxxXXXXXXXXXXXXXX
# XXX--- filament ---XXX
# XXXXXXXXxxXXXXXXXXXXXX
[filament:*common*]
cooling=1
compatible_printers=
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition=! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
end_filament_gcode="; Filament-specific end gcode"
compatible_printers_condition=printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:*PET06*]
inherits=*PET*
compatible_printers_condition=nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:*FLEX*]
inherits=*common*
bed_temperature=50
bridge_fan_speed=80
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition=nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
cooling=0
disable_fan_first_layers=3
extrusion_multiplier=1.15
fan_always_on=0
fan_below_layer_time=100
filament_colour=#008000
filament_max_volumetric_speed=1.5
filament_type=FLEX
first_layer_bed_temperature=50
first_layer_temperature=240
max_fan_speed=90
min_fan_speed=70
start_filament_gcode="M900 K0"; Filament gcode"
temperature=240
filament_retract_length=0.8
filament_deretract_speed=25
filament_retract_lift=0
filament_wipe=0
[filament:ColorFabb bronzeFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.2
filament_cost=80.65
filament_density=3.9
filament_spool_weight=236
filament_colour=#804040
filament_max_volumetric_speed=9
[filament:ColorFabb steelFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.2
filament_cost=80.65
filament_density=3.13
filament_spool_weight=236
filament_colour=#808080
filament_max_volumetric_speed=8
[filament:ColorFabb copperFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.2
filament_cost=80.65
filament_density=3.9
filament_spool_weight=236
filament_colour=#82603E
filament_max_volumetric_speed=9
[filament:ColorFabb HT]
inherits=*PET*
filament_vendor=ColorFabb
bed_temperature=110
bridge_fan_speed=30
cooling=1
disable_fan_first_layers=3
fan_always_on=0
fan_below_layer_time=10
filament_cost=65.66
filament_density=1.18
filament_spool_weight=236
first_layer_bed_temperature=105
first_layer_temperature=270
max_fan_speed=20
min_fan_speed=10
temperature=270
[filament:ColorFabb PLA-PHA]
inherits=*PLA*
filament_vendor=ColorFabb
filament_cost=54.84
filament_density=1.24
filament_spool_weight=236
[filament:ColorFabb woodFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=78.63
filament_density=1.15
filament_spool_weight=236
filament_colour=#dfc287
filament_max_volumetric_speed=9
first_layer_temperature=200
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=200
filament_retract_lift=0.2
[filament:ColorFabb corkFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=78.63
filament_density=1.18
filament_spool_weight=236
filament_colour=#634d33
filament_max_volumetric_speed=6
first_layer_temperature=220
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=220
filament_retract_lift=0.2
[filament:ColorFabb XT]
inherits=*PET*
filament_vendor=ColorFabb
filament_cost=62.90
filament_density=1.27
filament_spool_weight=236
first_layer_bed_temperature=90
first_layer_temperature=260
temperature=270
[filament:ColorFabb XT-CF20]
inherits=*PET*
filament_vendor=ColorFabb
extrusion_multiplier=1.05
filament_cost=80.65
filament_density=1.35
filament_spool_weight=236
filament_colour=#804040
filament_max_volumetric_speed=2
first_layer_bed_temperature=90
first_layer_temperature=260
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
temperature=260
filament_retract_length=nil
filament_retract_lift=0.4
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:ColorFabb nGen]
inherits=*PET*
filament_vendor=ColorFabb
filament_cost=52.46
filament_density=1.2
filament_spool_weight=236
bridge_fan_speed=40
fan_always_on=0
fan_below_layer_time=10
filament_type=NGEN
first_layer_temperature=240
max_fan_speed=35
min_fan_speed=20
[filament:ColorFabb nGen flex]
inherits=*FLEX*
filament_vendor=ColorFabb
filament_cost=58.30
filament_density=1
filament_spool_weight=236
bed_temperature=85
bridge_fan_speed=40
cooling=1
disable_fan_first_layers=3
extrusion_multiplier=1
fan_below_layer_time=10
filament_max_volumetric_speed=5
first_layer_bed_temperature=85
first_layer_temperature=260
max_fan_speed=35
min_fan_speed=20
temperature=260
filament_retract_length=nil
filament_retract_lift=0
compatible_printers_condition=nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
[filament:Kimya PETG Carbon]
inherits=*PET*
filament_vendor=Kimya
extrusion_multiplier=1.05
filament_cost=150.02
filament_density=1.317
filament_colour=#804040
filament_max_volumetric_speed=6
first_layer_bed_temperature=85
first_layer_temperature=240
temperature=240
filament_retract_length=nil
filament_retract_lift=0.3
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Kimya ABS Carbon]
inherits=*ABSC*
filament_vendor=Kimya
filament_cost=140.34
filament_density=1.032
filament_colour=#804040
filament_max_volumetric_speed=6
first_layer_temperature=260
temperature=260
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Kimya ABS Kevlar]
inherits=Kimya ABS Carbon
filament_vendor=Kimya
filament_density=1.037
[filament:E3D Edge]
inherits=*PET*
filament_vendor=E3D
filament_cost=56.9
filament_density=1.26
filament_type=EDGE
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
[filament:Prusament PC Blend Carbon Fiber @MK2]
inherits=Prusament PC Blend Carbon Fiber
first_layer_bed_temperature=105
bed_temperature=110
disable_fan_first_layers=6
compatible_printers_condition=nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
[filament:Fillamentum Timberfill]
inherits=*PLA*
filament_vendor=Fillamentum
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=68
filament_density=1.15
filament_spool_weight=230
filament_colour=#804040
filament_max_volumetric_speed=10
first_layer_temperature=190
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=190
filament_retract_lift=0.2
[filament:Smartfil Wood]
inherits=*PLA*
filament_vendor=Smart Materials 3D
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=68
filament_density=1.58
filament_colour=#804040
filament_max_volumetric_speed=9
first_layer_temperature=220
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=220
filament_retract_lift=0.2
[filament:Generic ABS]
inherits=*ABSC*
filament_vendor=Generic
filament_cost=27.82
filament_density=1.04
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Esun ABS]
inherits=*ABSC*
filament_vendor=Esun
filament_cost=27.82
filament_density=1.01
filament_spool_weight=265
[filament:Hatchbox ABS]
inherits=*ABSC*
filament_vendor=Hatchbox
filament_cost=27.82
filament_density=1.04
filament_spool_weight=245
[filament:Plasty Mladec ABS]
inherits=*ABSC*
filament_vendor=Plasty Mladec
filament_cost=27.82
filament_density=1.08
filament_spool_weight=230
[filament:Verbatim ABS]
inherits=*ABSC*
filament_vendor=Verbatim
filament_cost=25.87
filament_density=1.05
filament_spool_weight=235
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
[filament:Generic PETG]
inherits=*PET*
renamed_from="Generic PET"
filament_vendor=Generic
filament_cost=27.82
filament_density=1.27
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
filament_notes="High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134"
temperature=215
max_fan_speed=80
min_fan_speed=30
full_fan_speed_layer=0
slowdown_below_layer_time=20
filament_spool_weight=230
[filament:Extrudr GreenTEC Pro Carbon]
inherits=*PLA*
filament_vendor=Extrudr
filament_cost=56.23
filament_density=1.2
filament_notes="High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
first_layer_temperature=225
max_fan_speed=80
min_fan_speed=30
temperature=225
full_fan_speed_layer=0
slowdown_below_layer_time=20
filament_spool_weight=230
compatible_printers_condition=nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
filament_spool_weight=0
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Please use a nozzle that is resistant to abrasive filaments, like hardened steel."
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=220
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=230
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PETG]
inherits=*PET*
filament_vendor=Prusa Polymers
first_layer_temperature=240
temperature=250
filament_cost=36.29
filament_density=1.27
filament_spool_weight=201
filament_type=PETG
compatible_printers_condition=nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa PETG @0.6 nozzle]
inherits=*PET06*
renamed_from="Prusa PET 0.6 nozzle"; "Prusa PETG 0.6 nozzle"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time=20
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=printer_model=="MINI" and nozzle_diameter[0]!=0.8
[filament:Prusament PC Blend Carbon Fiber @MINI]
inherits=Prusament PC Blend @MINI
filament_cost=90.73
filament_density=1.16
extrusion_multiplier=1.04
first_layer_temperature=280
temperature=280
disable_fan_first_layers=4
fan_below_layer_time=10
filament_max_volumetric_speed=6.5
filament_colour=#BBBBBB
compatible_printers_condition=printer_model=="MINI" and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8
[filament:Prusa ABS @MINI]
inherits=*ABSMINI*
filament_vendor=Made for Prusa
filament_cost=27.82
filament_density=1.08
filament_spool_weight=230
fan_always_on=0
cooling=1
min_fan_speed=15
max_fan_speed=15
disable_fan_first_layers=4
fan_below_layer_time=30
bridge_fan_speed=25
compatible_printers_condition=printer_model=="MINI" and nozzle_diameter[0]!=0.8
[filament:Generic HIPS @MINI]
inherits=*ABSMINI*
filament_vendor=Generic
filament_cost=27.3
filament_density=1.04
bridge_fan_speed=50
cooling=1
extrusion_multiplier=1
fan_always_on=1
fan_below_layer_time=10
filament_colour=#FFFFD7
filament_soluble=1
filament_type=HIPS
first_layer_temperature=230
max_fan_speed=20
min_fan_speed=20
temperature=230
[filament:ColorFabb HT @MINI]
inherits=*PETMINI*
filament_vendor=ColorFabb
bed_temperature=100
bridge_fan_speed=30
cooling=1
disable_fan_first_layers=3
fan_always_on=0
fan_below_layer_time=10
filament_cost=58.66
filament_density=1.18
filament_spool_weight=236
first_layer_bed_temperature=100
first_layer_temperature=270
max_fan_speed=20
min_fan_speed=15
temperature=270
[filament:ColorFabb XT @MINI]
inherits=*PETMINI*
filament_vendor=ColorFabb
filament_type=PETG
filament_cost=62.90
filament_density=1.27
filament_spool_weight=236
first_layer_bed_temperature=90
first_layer_temperature=260
temperature=270
[filament:ColorFabb XT-CF20 @MINI]
inherits=*PETMINI*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model=="MINI"
extrusion_multiplier=1.05
filament_cost=80.65
filament_density=1.35
filament_spool_weight=236
filament_colour=#804040
filament_max_volumetric_speed=2
first_layer_bed_temperature=90
first_layer_temperature=260
temperature=260
[filament:Taulman T-Glase @MINI]
inherits=*PETMINI*
filament_vendor=Taulman
filament_cost=40
filament_density=1.27
bridge_fan_speed=40
cooling=0
fan_always_on=0
first_layer_bed_temperature=90
first_layer_temperature=240
max_fan_speed=5
min_fan_speed=0
[filament:E3D Edge @MINI]
inherits=*PETMINI*
filament_vendor=E3D
filament_cost=56.9
filament_density=1.26
filament_type=EDGE
[filament:Prusa PETG @MINI]
inherits=*PETMINI*
renamed_from="Prusa PET MINI"; "Prusa PETG MINI"
filament_vendor=Made for Prusa
filament_cost=27.82
filament_density=1.27
filament_spool_weight=230
compatible_printers_condition=printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6
[filament:Prusa PETG @0.6 nozzle MINI]
inherits=*PETMINI06*
renamed_from="Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI"
filament_vendor=Made for Prusa
filament_cost=27.82
filament_density=1.27
filament_spool_weight=230
## Filaments 0.8 nozzle
[filament:Generic PLA @0.8 nozzle]
inherits=Generic PLA
first_layer_temperature=220
temperature=220
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic ABS @0.8 nozzle]
inherits=Generic ABS
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic PETG @0.8 nozzle]
inherits=Generic PETG
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=20
filament_retract_lift=0.2
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa PLA @0.8 nozzle]
inherits=Prusa PLA
first_layer_temperature=220
temperature=220
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa PETG @0.8 nozzle]
inherits=Prusa PETG
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=20
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa ABS @0.8 nozzle]
inherits=Prusa ABS
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic FLEX @0.8 nozzle]
inherits=Generic FLEX
filament_max_volumetric_speed=4.3
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
[filament:Generic HIPS @0.8 nozzle]
inherits=Generic HIPS
first_layer_temperature=240
temperature=240
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PLA @0.8 nozzle]
inherits=Prusament PLA
first_layer_temperature=225
temperature=225
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PETG @0.8 nozzle]
inherits=Prusament PETG
first_layer_temperature=250
temperature=260
filament_max_volumetric_speed=20
filament_retract_lift=0.2
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament ASA @0.8 nozzle]
inherits=Prusament ASA
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PC Blend @0.8 nozzle]
inherits=Prusament PC Blend
filament_max_volumetric_speed=13
filament_retract_lift=0.25
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material
[filament:Prusament PC Blend @0.8 nozzle MK2]
inherits=Prusament PC Blend @MK2
filament_max_volumetric_speed=13
filament_retract_lift=0.25
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle]
inherits=Prusament PC Blend Carbon Fiber
filament_max_volumetric_speed=13
filament_retract_lift=0.25
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material
[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MK2]
inherits=Prusament PC Blend Carbon Fiber @MK2
filament_max_volumetric_speed=13
filament_retract_lift=0.25
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
[filament:Prusament PVB @0.8 nozzle]
inherits=Prusament PVB
first_layer_temperature=225
temperature=225
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time=20
## Filaments 0.8 nozzle MMU2
[filament:Generic HIPS @MMU2 0.8 nozzle]
inherits=Generic HIPS @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
[filament:Prusament ASA @MMU2 0.8 nozzle]
inherits=Prusament ASA @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
slowdown_below_layer_time=20
filament_max_volumetric_speed=14
[filament:Prusament PC Blend @MMU2 0.8 nozzle]
inherits=Prusament PC Blend @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=12
[filament:Generic PETG @MMU2 0.8 nozzle]
inherits=Generic PETG @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=14
first_layer_temperature=215
temperature=210
[filament:Prusament PLA @MMU2 0.8 nozzle]
inherits=Prusament PLA @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=14
first_layer_temperature=215
temperature=210
[filament:Verbatim BVOH @MMU2 0.8 nozzle]
inherits=Verbatim BVOH @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=8
[filament:PrimaSelect PVA+ @MMU2 0.8 nozzle]
inherits=PrimaSelect PVA+ @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=8
## Filaments 0.8 nozzle MINI
[filament:Generic ABS @0.8 nozzle MINI]
inherits=Generic ABS @MINI
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=13
filament_retract_length=3.2
filament_wipe=nil
filament_retract_speed=nil
filament_deretract_speed=nil
filament_retract_lift=nil
filament_retract_before_travel=2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Generic PETG @0.8 nozzle MINI]
inherits=Generic PETG @MINI
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusa PETG @0.8 nozzle MINI]
inherits=Prusa PETG @MINI
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusa ABS @0.8 nozzle MINI]
inherits=Prusa ABS @MINI
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=13
slowdown_below_layer_time=20
filament_retract_length=3.2
filament_wipe=nil
filament_retract_speed=nil
filament_deretract_speed=nil
filament_retract_lift=nil
filament_retract_before_travel=2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Generic FLEX @0.8 nozzle MINI]
inherits=Generic FLEX @MINI
filament_max_volumetric_speed=4.3
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament PETG @0.8 nozzle MINI]
inherits=Prusament PETG @MINI
first_layer_temperature=245
temperature=255
filament_max_volumetric_speed=15
filament_retract_lift=0.25
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament ASA @0.8 nozzle MINI]
inherits=Prusament ASA @MINI
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=13
slowdown_below_layer_time=20
filament_retract_length=3.2
filament_wipe=nil
filament_retract_speed=nil
filament_deretract_speed=nil
filament_retract_lift=nil
filament_retract_before_travel=2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament PC Blend @0.8 nozzle MINI]
inherits=Prusament PC Blend @MINI
filament_max_volumetric_speed=11
filament_retract_lift=0.25
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MINI]
inherits=Prusament PC Blend Carbon Fiber @MINI
filament_max_volumetric_speed=10
filament_retract_lift=0.25
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
end_gcode=G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors
extruder_offset=0x0
gcode_flavor=marlin
silent_mode=0
remaining_times=1
machine_max_acceleration_e=10000
machine_max_acceleration_extruding=2000
machine_max_acceleration_retracting=1500
machine_max_acceleration_x=9000
machine_max_acceleration_y=9000
machine_max_acceleration_z=500
machine_max_feedrate_e=120
machine_max_feedrate_x=500
machine_max_feedrate_y=500
machine_max_feedrate_z=12
machine_max_jerk_e=2.5
machine_max_jerk_x=10
machine_max_jerk_y=10
machine_max_jerk_z=0.2
machine_min_extruding_rate=0
machine_min_travel_rate=0
layer_gcode=;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height=0.25
min_layer_height=0.07
max_print_height=200
nozzle_diameter=0.4
octoprint_apikey=
octoprint_host=
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_settings_id=
retract_before_travel=1
retract_before_wipe=0%
retract_layer_change=1
retract_length=0.8
retract_length_toolchange=4
retract_lift=0.4
retract_lift_above=0
retract_lift_below=199
retract_restart_extra=0
retract_restart_extra_toolchange=0
retract_speed=35
serial_port=
serial_speed=250000
single_extruder_multi_material=0
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle
printer_model=MK2.5MMU2
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle
printer_model=MK2.5MMU2
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle
printer_model=MK2.5MMU2
[printer:Original Prusa i3 MK2.5 MMU2]
inherits=Original Prusa i3 MK2.5; *mm2*
printer_model=MK2.5MMU2
max_print_height=200
remaining_times=1
silent_mode=0
retract_lift_below=199
machine_max_acceleration_e=10000
machine_max_acceleration_extruding=2000
machine_max_acceleration_retracting=1500
machine_max_acceleration_x=9000
machine_max_acceleration_y=9000
machine_max_acceleration_z=500
machine_max_feedrate_e=120
machine_max_feedrate_x=500
machine_max_feedrate_y=500
machine_max_feedrate_z=12
machine_max_jerk_e=4.5
machine_max_jerk_x=10
machine_max_jerk_y=10
machine_max_jerk_z=0.2
machine_min_extruding_rate=0
machine_min_travel_rate=0
default_print_profile=0.15mm OPTIMAL @MK2.5
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material=1
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
# (for example the retract values) are duplicaed from the first value, so they do not need
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material=1
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
# (for example the retract values) are duplicaed from the first value, so they do not need
end_gcode=G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
machine_max_acceleration_e=5000,5000
machine_max_acceleration_extruding=1250,1250
machine_max_acceleration_retracting=1250,1250
machine_max_acceleration_x=1000,960
machine_max_acceleration_y=1000,960
machine_max_acceleration_z=200,200
machine_max_feedrate_e=120,120
machine_max_feedrate_x=200,100
machine_max_feedrate_y=200,100
machine_max_feedrate_z=12,12
machine_max_jerk_e=4.5,4.5
machine_max_jerk_x=8,8
machine_max_jerk_y=8,8
machine_max_jerk_z=0.4,0.4
machine_min_extruding_rate=0,0
machine_min_travel_rate=0,0
silent_mode=1
remaining_times=1
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
start_gcode=G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
default_print_profile=0.10mm DETAIL @0.25 nozzle MINI
retract_length=3
retract_lift=0.15
retract_before_travel=1
start_gcode=G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow
[printer:Original Prusa MINI & MINI+ 0.6 nozzle]
inherits=Original Prusa MINI & MINI+
renamed_from="Original Prusa MINI 0.6 nozzle"
printer_variant=0.6
nozzle_diameter=0.6
max_layer_height=0.40
min_layer_height=0.15
default_print_profile=0.30mm QUALITY @0.6 nozzle MINI
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1S\n
