compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
infill_extrusion_width=0.5
[print:0.10mm DETAIL]
inherits=*0.10mm*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
external_perimeter_speed=40
infill_acceleration=2000
infill_speed=60
perimeter_speed=50
solid_infill_speed=50
perimeters=3
bridge_acceleration=800
[print:0.15mm 100mms Linear Advance]
inherits=*0.15mm*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
top_infill_extrusion_width=0.45
[print:0.20mm 100mms Linear Advance]
inherits=*0.20mm*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed=50
infill_speed=100
max_print_speed=150
perimeter_speed=60
small_perimeter_speed=30
solid_infill_speed=100
support_material_speed=60
top_solid_infill_speed=70
[print:0.20mm NORMAL]
inherits=*0.20mm*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
[print:0.35mm FAST]
inherits=*0.35mm*
bridge_flow_ratio=0.95
bridge_speed=30
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
first_layer_extrusion_width=0.42
perimeter_extrusion_width=0.43
solid_infill_extrusion_width=0.7
top_infill_extrusion_width=0.45
support_material_extrusion_width=0.37
support_material_contact_distance=0.1
raft_contact_distance=0.2
top_solid_infill_speed=40
thick_bridges=1
overhangs=0
## MMU1 specific
[print:0.15mm OPTIMAL SOLUBLE FULL]
inherits=*0.15mm*; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed=20
infill_acceleration=1000
infill_speed=40
perimeter_acceleration=600
perimeter_speed=25
small_perimeter_speed=15
solid_infill_speed=40
top_solid_infill_speed=30
support_material_contact_distance=0.08
raft_contact_distance=0.07
perimeter_extrusion_width=0.27
external_perimeter_extrusion_width=0.27
infill_extrusion_width=0.27
solid_infill_extrusion_width=0.27
single_extruder_multi_material_priming=0
[print:0.15mm SOLUBLE FULL @0.25 nozzle]
inherits=0.15mm OPTIMAL @0.25 nozzle
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders>1
support_material_contact_distance=0
raft_contact_distance=0
wipe_tower_bridging=5
solid_infill_speed=40
support_material_extruder=5
support_material_interface_extruder=5
support_material_with_sheath=1
support_material_interface_layers=4
support_material_threshold=60
support_material=1
support_material_synchronize_layers=1
support_material_xy_spacing=100%
support_material_style=snug
raft_first_layer_expansion=2
support_material_interface_spacing=0.05
single_extruder_multi_material_priming=0
[print:0.15mm SOLUBLE INTERFACE @0.25 nozzle]
inherits=0.15mm SOLUBLE FULL @0.25 nozzle
support_material_extruder=0
support_material_interface_extruder=5
support_material_with_sheath=0
support_material_style=grid
## MK2 - 0.6mm nozzle
[print:0.15mm OPTIMAL @0.6 nozzle]
inherits=*0.15mm*; *0.6nozzle*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
[print:0.20mm NORMAL @0.6 nozzle]
inherits=*0.20mm*; *0.6nozzle*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
[print:0.35mm FAST @0.6 nozzle]
inherits=*0.35mm*; *0.6nozzle*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
## MMU1 specific
[print:0.35mm FAST sol full @0.6 nozzle]
inherits=*0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width=0.6
external_perimeter_speed=30
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
perimeter_speed=40
support_material_speed=40
support_material_interface_layers=2
support_material_xy_spacing=120%
top_infill_extrusion_width=0.6
support_material_extrusion_width=0.6
[print:0.35mm FAST sol int @0.6 nozzle]
inherits=0.35mm FAST sol full @0.6 nozzle
support_material_extruder=0
support_material_interface_layers=3
support_material_with_sheath=0
support_material_xy_spacing=150%
## MK2.5
[print:0.10mm DETAIL @MK2.5]
inherits=0.10mm DETAIL
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming=0
[print:0.15mm 100mms Linear Advance @MK2.5]
inherits=0.15mm 100mms Linear Advance
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
[print:0.15mm OPTIMAL @MK2.5]
inherits=0.15mm OPTIMAL
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
[print:0.20mm 100mms Linear Advance @MK2.5]
inherits=0.20mm 100mms Linear Advance
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
[print:0.20mm NORMAL @MK2.5]
inherits=0.20mm NORMAL
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
[print:0.35mm FAST @MK2.5]
inherits=0.35mm FAST
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming=0
overhangs=0
## MK2.5 - MMU2 specific
[print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5]
inherits=0.15mm OPTIMAL SOLUBLE FULL
support_material_extruder=5
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
[print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5]
inherits=0.15mm OPTIMAL SOLUBLE INTERFACE
support_material_extruder=0
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
[print:0.20mm NORMAL SOLUBLE FULL @MK2.5]
inherits=0.20mm NORMAL SOLUBLE FULL
support_material_extruder=5
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming=0
[print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5]
inherits=0.20mm NORMAL SOLUBLE INTERFACE
support_material_extruder=0
support_material_interface_extruder=5
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming=0
# MK2.5 MMU2 0.6 nozzle
[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5]
inherits=*0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width=0.6
external_perimeter_speed=30
notes=Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes=Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern=grid
fill_density=20%
support_material_contact_distance=0.08
raft_contact_distance=0.07
perimeter_extrusion_width=0.27
external_perimeter_extrusion_width=0.27
infill_extrusion_width=0.27
solid_infill_extrusion_width=0.27
[print:0.15mm SOLUBLE FULL @0.25 nozzle MK3]
inherits=0.15mm QUALITY @0.25 nozzle MK3
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders>1
compatible_printers_condition=printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
notes=Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition=! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
end_filament_gcode="; Filament-specific end gcode"
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
[filament:*PET*]
inherits=*common*
bed_temperature=90
bridge_fan_speed=50
disable_fan_first_layers=3
full_fan_speed_layer=5
fan_always_on=1
fan_below_layer_time=20
filament_colour=#FF8000
filament_max_volumetric_speed=8
filament_type=PETG
first_layer_bed_temperature=85
first_layer_temperature=230
max_fan_speed=50
min_fan_speed=30
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature=240
filament_retract_length=1
filament_retract_lift=0.2
compatible_printers_condition=printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:*PET06*]
inherits=*PET*
compatible_printers_condition=nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:*FLEX*]
inherits=*common*
bed_temperature=50
bridge_fan_speed=80
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition=nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
cooling=0
disable_fan_first_layers=3
extrusion_multiplier=1.15
fan_always_on=0
fan_below_layer_time=100
filament_colour=#008000
filament_max_volumetric_speed=1.5
filament_type=FLEX
first_layer_bed_temperature=50
first_layer_temperature=240
max_fan_speed=90
min_fan_speed=70
start_filament_gcode="M900 K0"; Filament gcode"
temperature=240
filament_retract_length=0.8
filament_deretract_speed=25
filament_retract_lift=0
filament_wipe=0
[filament:ColorFabb bronzeFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.2
filament_cost=80.65
filament_density=3.9
filament_spool_weight=236
filament_colour=#804040
filament_max_volumetric_speed=9
[filament:ColorFabb steelFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.2
filament_cost=80.65
filament_density=3.13
filament_spool_weight=236
filament_colour=#808080
filament_max_volumetric_speed=8
[filament:ColorFabb copperFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.2
filament_cost=80.65
filament_density=3.9
filament_spool_weight=236
filament_colour=#82603E
filament_max_volumetric_speed=9
[filament:ColorFabb HT]
inherits=*PET*
filament_vendor=ColorFabb
bed_temperature=110
bridge_fan_speed=30
cooling=1
disable_fan_first_layers=3
fan_always_on=0
fan_below_layer_time=10
filament_cost=65.66
filament_density=1.18
filament_spool_weight=236
first_layer_bed_temperature=105
first_layer_temperature=270
max_fan_speed=20
min_fan_speed=10
temperature=270
[filament:ColorFabb PLA-PHA]
inherits=*PLA*
filament_vendor=ColorFabb
filament_cost=54.84
filament_density=1.24
filament_spool_weight=236
[filament:ColorFabb woodFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=78.63
filament_density=1.15
filament_spool_weight=236
filament_colour=#dfc287
filament_max_volumetric_speed=9
first_layer_temperature=200
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=200
filament_retract_lift=0.2
[filament:ColorFabb corkFill]
inherits=*PLA*
filament_vendor=ColorFabb
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=78.63
filament_density=1.18
filament_spool_weight=236
filament_colour=#634d33
filament_max_volumetric_speed=6
first_layer_temperature=220
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=220
filament_retract_lift=0.2
[filament:ColorFabb XT]
inherits=*PET*
filament_vendor=ColorFabb
filament_cost=62.90
filament_density=1.27
filament_spool_weight=236
first_layer_bed_temperature=90
first_layer_temperature=260
temperature=270
[filament:ColorFabb XT-CF20]
inherits=*PET*
filament_vendor=ColorFabb
extrusion_multiplier=1.05
filament_cost=80.65
filament_density=1.35
filament_spool_weight=236
filament_colour=#804040
filament_max_volumetric_speed=2
first_layer_bed_temperature=90
first_layer_temperature=260
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
temperature=260
filament_retract_length=nil
filament_retract_lift=0.4
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:ColorFabb nGen]
inherits=*PET*
filament_vendor=ColorFabb
filament_cost=52.46
filament_density=1.2
filament_spool_weight=236
bridge_fan_speed=40
fan_always_on=0
fan_below_layer_time=10
filament_type=NGEN
first_layer_temperature=240
max_fan_speed=35
min_fan_speed=20
[filament:ColorFabb nGen flex]
inherits=*FLEX*
filament_vendor=ColorFabb
filament_cost=58.30
filament_density=1
filament_spool_weight=236
bed_temperature=85
bridge_fan_speed=40
cooling=1
disable_fan_first_layers=3
extrusion_multiplier=1
fan_below_layer_time=10
filament_max_volumetric_speed=5
first_layer_bed_temperature=85
first_layer_temperature=260
max_fan_speed=35
min_fan_speed=20
temperature=260
filament_retract_length=nil
filament_retract_lift=0
compatible_printers_condition=nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
[filament:Kimya PETG Carbon]
inherits=*PET*
filament_vendor=Kimya
extrusion_multiplier=1.05
filament_cost=150.02
filament_density=1.317
filament_colour=#804040
filament_max_volumetric_speed=6
first_layer_bed_temperature=85
first_layer_temperature=240
temperature=240
filament_retract_length=nil
filament_retract_lift=0.3
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Kimya ABS Carbon]
inherits=*ABSC*
filament_vendor=Kimya
filament_cost=140.34
filament_density=1.032
filament_colour=#804040
filament_max_volumetric_speed=6
first_layer_temperature=260
temperature=260
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Kimya ABS Kevlar]
inherits=Kimya ABS Carbon
filament_vendor=Kimya
filament_density=1.037
[filament:E3D Edge]
inherits=*PET*
filament_vendor=E3D
filament_cost=56.9
filament_density=1.26
filament_type=EDGE
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:E3D PC-ABS]
inherits=*ABS*
filament_vendor=E3D
filament_cost=0
filament_type=PC
filament_density=1.05
first_layer_temperature=270
temperature=270
[filament:Fillamentum PLA]
inherits=*PLA*
filament_vendor=Fillamentum
filament_cost=35.48
filament_density=1.24
filament_spool_weight=230
[filament:Fillamentum ABS]
inherits=*ABSC*
filament_vendor=Fillamentum
filament_cost=32.4
filament_density=1.04
filament_spool_weight=230
first_layer_temperature=240
temperature=240
[filament:Fillamentum ASA]
inherits=*ABS*
filament_vendor=Fillamentum
filament_cost=38.7
filament_density=1.07
filament_spool_weight=230
fan_always_on=1
cooling=1
min_fan_speed=20
max_fan_speed=20
min_print_speed=15
slowdown_below_layer_time=15
first_layer_temperature=260
temperature=260
filament_type=ASA
[filament:Prusament ASA]
inherits=*ABS*
filament_vendor=Prusa Polymers
filament_cost=42.69
filament_density=1.07
filament_spool_weight=201
fan_always_on=1
first_layer_temperature=260
first_layer_bed_temperature=105
temperature=260
bed_temperature=110
cooling=1
min_fan_speed=20
max_fan_speed=20
bridge_fan_speed=30
min_print_speed=15
slowdown_below_layer_time=15
disable_fan_first_layers=4
filament_type=ASA
filament_colour=#FFF2EC
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
[filament:Prusament PC Blend @MK2]
inherits=Prusament PC Blend
first_layer_bed_temperature=105
bed_temperature=110
disable_fan_first_layers=6
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
[filament:Prusament PC Blend Carbon Fiber]
inherits=Prusament PC Blend
filament_cost=90.73
filament_density=1.16
extrusion_multiplier=1.04
first_layer_temperature=285
temperature=285
disable_fan_first_layers=4
fan_below_layer_time=10
filament_colour=#BBBBBB
filament_retract_length=nil
filament_retract_lift=nil
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
[filament:Prusament PC Blend Carbon Fiber @MK2]
inherits=Prusament PC Blend Carbon Fiber
first_layer_bed_temperature=105
bed_temperature=110
disable_fan_first_layers=6
compatible_printers_condition=nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
[filament:Fillamentum CPE]
inherits=*PET*
filament_vendor=Fillamentum
filament_cost=56.45
filament_density=1.25
filament_spool_weight=230
filament_type=CPE
first_layer_bed_temperature=90
first_layer_temperature=275
min_fan_speed=30
max_fan_speed=50
disable_fan_first_layers=3
full_fan_speed_layer=5
temperature=275
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
[filament:Fillamentum Timberfill]
inherits=*PLA*
filament_vendor=Fillamentum
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=68
filament_density=1.15
filament_spool_weight=230
filament_colour=#804040
filament_max_volumetric_speed=10
first_layer_temperature=190
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=190
filament_retract_lift=0.2
[filament:Smartfil Wood]
inherits=*PLA*
filament_vendor=Smart Materials 3D
compatible_printers_condition=nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier=1.1
filament_cost=68
filament_density=1.58
filament_colour=#804040
filament_max_volumetric_speed=9
first_layer_temperature=220
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=220
filament_retract_lift=0.2
[filament:Generic ABS]
inherits=*ABSC*
filament_vendor=Generic
filament_cost=27.82
filament_density=1.04
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
[filament:Generic PETG]
inherits=*PET*
renamed_from="Generic PET"
filament_vendor=Generic
filament_cost=27.82
filament_density=1.27
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
filament_notes="High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134"
filament_notes="High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
first_layer_temperature=225
max_fan_speed=80
min_fan_speed=30
temperature=225
full_fan_speed_layer=0
slowdown_below_layer_time=20
filament_spool_weight=230
compatible_printers_condition=nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
filament_spool_weight=0
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:addnorth Adura X @MINI]
inherits=addnorth Adura X
filament_retract_length=nil
filament_retract_lift=nil
filament_retract_speed=40
filament_deretract_speed=25
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model=="MINI"
[filament:addnorth Adura X @MMU1]
inherits=addnorth Adura X
filament_retract_length=nil
filament_retract_lift=nil
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"
filament_notes="Please use a nozzle that is resistant to abrasive filaments, like hardened steel."
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:addnorth Rigid X @MINI]
inherits=addnorth Rigid X
filament_retract_length=nil
filament_retract_lift=nil
filament_retract_speed=40
filament_deretract_speed=25
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model=="MINI"
[filament:addnorth Rigid X @MMU1]
inherits=addnorth Rigid X
filament_retract_length=nil
filament_retract_lift=nil
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"
[filament:addnorth Textura]
inherits=*PLA*
filament_vendor=addnorth
filament_cost=24.99
filament_density=1.24
extrusion_multiplier=0.95
temperature=215
bed_temperature=65
first_layer_temperature=215
first_layer_bed_temperature=65
min_fan_speed=20
max_fan_speed=40
bridge_fan_speed=60
full_fan_speed_layer=0
slowdown_below_layer_time=15
min_print_speed=20
filament_spool_weight=0
filament_retract_length=1
compatible_printers_condition=printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic PLA]
inherits=*PLA*
filament_vendor=Generic
filament_cost=25.4
filament_density=1.24
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Devil Design PLA]
inherits=*PLA*
filament_vendor=Devil Design
filament_cost=20.99
filament_density=1.24
filament_spool_weight=250
[filament:Devil Design PETG]
inherits=*PET*
filament_vendor=Devil Design
filament_cost=20.99
filament_density=1.23
filament_spool_weight=250
first_layer_temperature=230
first_layer_bed_temperature=85
temperature=230
bed_temperature=90
[filament:Spectrum PLA]
inherits=*PLA*
filament_vendor=Spectrum
filament_cost=21.50
filament_density=1.24
[filament:Generic FLEX]
inherits=*FLEX*
filament_vendor=Generic
filament_cost=82
filament_density=1.22
filament_max_volumetric_speed=1.2
filament_retract_length=0
filament_retract_speed=nil
filament_retract_lift=nil
compatible_printers_condition=nozzle_diameter[0]>0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model=="MINI"
[filament:Filatech FilaPLA]
inherits=*PLA*
filament_vendor=Filatech
filament_cost=
filament_density=1.3
first_layer_temperature=235
first_layer_bed_temperature=50
temperature=230
bed_temperature=55
[filament:Filatech PLA]
inherits=*PLA*
filament_vendor=Filatech
filament_cost=
filament_density=1.25
first_layer_temperature=215
temperature=210
[filament:Filatech PLA+]
inherits=Filatech PLA
filament_density=1.24
[filament:Filatech FilaTough]
inherits=Filatech ABS
filament_cost=
extrusion_multiplier=0.95
filament_density=1.29
first_layer_temperature=245
first_layer_bed_temperature=80
temperature=240
bed_temperature=90
cooling=0
compatible_printers_condition=! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Filatech HIPS]
inherits=Prusa HIPS
filament_vendor=Filatech
filament_cost=
filament_density=1.07
filament_spool_weight=
first_layer_temperature=230
first_layer_bed_temperature=100
temperature=225
bed_temperature=110
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Filatech PA @MK2]
inherits=Filatech PA
first_layer_bed_temperature=105
bed_temperature=110
compatible_printers_condition=printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Filatech PC-ABS]
inherits=Filatech PC
first_layer_temperature=270
temperature=270
first_layer_bed_temperature=110
bed_temperature=115
filament_density=1.08
filament_type=PC
fan_always_on=0
cooling=1
extrusion_multiplier=0.95
disable_fan_first_layers=6
[filament:Filatech PC-ABS @MK2]
inherits=Filatech PC-ABS
first_layer_bed_temperature=105
bed_temperature=110
compatible_printers_condition=printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Material Description\nUltrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.\n\nPrinting Recommendations:\nUltrafuse PET can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
filament_notes="Material Description\nPLA PRO1 is an extremely versatile tough PLA filament made for professionals. It reduces your printing time by 30% – 80%, (subject to printer and object limitations) and the strength exceeds overall mechanical properties of printed ABS parts. Printer settings can be tuned to achieve blazing fast speeds or an unrivaled surface finish. The excellent quality control ensures the highest levels of consistency between colors and batches, it will perform as expected, every time.\n\nPrinting Recommendations:\nUltrafuse PLA PRO1 can be printed directly onto a clean build plate."
compatible_printers_condition=printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Material Description\nABS is the second most used 3D printing material. It is strong, flexible and has a high heat resistance. ABS is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone. To make a proper 3D print with ABS you will need a heated print bed. The filament is available in 9 colors.\n\nPrinting Recommendations:\n\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."
filament_retract_before_travel=2
filament_wipe=0
filament_retract_layer_change=0
[filament:Ultrafuse ABS @MINI]
inherits=Ultrafuse ABS; *ABSMINI*
filament_retract_layer_change=nil
[filament:Ultrafuse ABS Fusion+]
inherits=Ultrafuse ABS
filament_density=1.08
first_layer_bed_temperature=105
temperature=250
filament_colour=#FFF8D9
filament_notes="Material Description\nABS Fusion+ made with Polyscope XILOY™ 3D is an engineering filament which has been optimized for 3D-printing. This special grade has been developed in collaboration with Polyscope Polymers - renowned for its material solutions in the automotive industry. ABS is a thermoplastic which is used in many applications. Although ABS has been classified as a standard material in 3D-printing it is known to be quite challenging to process. ABS Fusion+ combines the properties of ABS with an improved processability. The filament is based on an ABS grade which can be directly printed on glass without any adhesives or tape and has a higher success rate of prints due to extreme low warping."
filament_retract_before_travel=2
filament_wipe=nil
filament_retract_layer_change=0
filament_retract_lift=0
[filament:Ultrafuse ABS Fusion+ @MINI]
inherits=Ultrafuse ABS Fusion+; *ABSMINI*
first_layer_bed_temperature=100
filament_retract_layer_change=nil
[filament:Ultrafuse ASA]
inherits=Ultrafuse ABS Fusion+
filament_density=1.07
filament_colour=#FFF4CA
first_layer_temperature=275
temperature=275
first_layer_bed_temperature=110
bed_temperature=105
filament_type=ASA
min_fan_speed=25
max_fan_speed=50
bridge_fan_speed=100
disable_fan_first_layers=4
filament_max_volumetric_speed=5
filament_notes="Material Description\nUltrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS. ASA offers additional benefits such as high outdoor weather resistance. The UV resistance, toughness, and rigidity make it an ideal material to 3D-print outdoor fixtures and appliances without losing its properties or color. When also taking into account the high heat resistance and high chemical resistance, this filament is a good choice for many types of applications.\n\nPrinting Recommendations:\nApply Magigoo PC, 3D lac or Dimafix to a clean build plate to improve adhesion."
[filament:Ultrafuse ASA @MINI]
inherits=Ultrafuse ASA; *ABSMINI*
filament_type=ASA
[filament:Ultrafuse HIPS]
inherits=Ultrafuse ABS
temperature=250
filament_density=1.02
filament_type=HIPS
min_fan_speed=20
max_fan_speed=20
filament_soluble=1
filament_notes="Material Description\nUltrafuse HIPS is a high-quality engineering thermoplastic, which is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing. HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HIPS is an easy breakaway support. Now you have the opportunity to create ABS models with complex geometry. HIPS is easy to post process with glue or with sanding paper."
compatible_printers_condition=printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
filament_notes="Material Description\nThe key features of Ultrafuse PA are the high strength and high modulus. Furthermore, Ultrafuse PA shows a good thermal distortion stability.\n\nPrinting Recommendations:\nApply PVA glue, Kapton tape or PA adhesive to a clean buildplate to improve adhesion."
[filament:Ultrafuse PA6 GF30]
inherits=Ultrafuse PA
filament_density=1.17
first_layer_temperature=270
temperature=270
first_layer_bed_temperature=100
bed_temperature=100
filament_colour=#404040
fan_always_on=1
min_fan_speed=0
max_fan_speed=50
bridge_fan_speed=100
disable_fan_first_layers=1
full_fan_speed_layer=3
slowdown_below_layer_time=15
filament_max_volumetric_speed=10
filament_retract_length=1.2
filament_retract_speed=40
filament_deretract_speed=30
filament_retract_lift=nil
filament_wipe=0
filament_notes="Material Description\nUltrafuse® PA6 GF30 is a unique compound specifically developed for FFF printing. Due to the glass fiber content of 30%, parts tend to warp less. In addition the excellent layer adhesion and its compatibility with the water soluble support Ultrafuse® BVOH make this material the perfect solution to develop industrial applications on an FFF printer.\n\nWith its high wear and chemical resistance, high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide variety of applications in automotive, electronics or transportation.\n\nUltrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PA6 GF30 can be printed directly onto a clean build plate. For challenging prints, use Magigoo PA gluestick to improve adhesion."
compatible_printers_condition=nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Ultrafuse PAHT-CF15]
inherits=Ultrafuse PA6 GF30
filament_density=1.23
filament_notes="Material Description\nPAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability, and chemical resistance, it has very good processability. It works in any FFF printer with a hardened nozzle. In addition to that, it is compatible with water-soluble support material and HiPS, which allow printing complex geometries that work in challenging environments. PAHT CF15 has high heat resistance up to 130 °C and low moisture absorption.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PAHT-CF can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
[filament:Ultrafuse PC-ABS-FR]
inherits=Ultrafuse ABS
filament_colour=#505050
filament_density=1.17
first_layer_temperature=275
temperature=275
first_layer_bed_temperature=110
bed_temperature=105
filament_type=PC
filament_max_volumetric_speed=8
filament_wipe=nil
min_fan_speed=20
max_fan_speed=20
bridge_fan_speed=30
disable_fan_first_layers=4
compatible_printers_condition=printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Material Description\nUltrafuse® PC/ABS FR Black is a V-0 flame retardant blend of Polycarbonate and ABS – two of the most used thermoplastics for engineering & electrical applications. The combination of these two materials results in a premium material with a mix of the excellent mechanical properties of PC and the comparably low printing temperature of ABS. Combined with a halogen free flame retardant, parts printed with Ultrafuse® PC/ABS FR Black feature great tensile and impact strength, higher thermal resistance than ABS and can fulfill the requirements of the UL94 V-0 standard.\n\nPrinting Recommendations:\nApply Magigoo PC to a clean build plate to improve adhesion."
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
[filament:Ultrafuse PET-CF15]
inherits=Ultrafuse PET
filament_density=1.36
filament_colour=#404040
first_layer_temperature=270
temperature=270
first_layer_bed_temperature=75
bed_temperature=75
min_fan_speed=60
max_fan_speed=100
bridge_fan_speed=100
disable_fan_first_layers=1
full_fan_speed_layer=3
slowdown_below_layer_time=15
fan_below_layer_time=30
filament_max_volumetric_speed=10
filament_retract_length=1.2
filament_retract_speed=40
filament_deretract_speed=30
filament_retract_lift=nil
filament_wipe=0
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_notes="Material Description\nPET CF15 is a Carbon Fiber reinforced PET which has precisely tuned material properties, for a wide range of technical applications. The filament is very strong and stiff and has high heat resistance. With its high dimensional stability and low abrasiveness, the filament offers an easy to print experience which allows direct printing on glass or a PEI sheet. It is compatible with HiPS for breakaway support and water soluble support and has an excellent surface finish.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PET-CF15 can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
compatible_printers_condition=nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Ultrafuse PLA]
inherits=*PLA*
filament_vendor=BASF
filament_density=1.25
full_fan_speed_layer=3
filament_notes="Material Description\nPLA is one of the most used materials for 3D printing. Ultrafuse PLA is available in a wide range of colors. The glossy feel often attracts those who print display models or items for household use. Many appreciate the plant-based origin of this material. When properly cooled, PLA has a high maximum printing speed and sharp printed corners. Combining this with low warping of the print makes it a popular plastic for home printers, hobbyists, prototyping and schools.\n\nPrinting Recommendations:\nUltrafuse PLA can be printed directly onto a clean build plate."
[filament:Ultrafuse PP]
inherits=Ultrafuse ABS
filament_density=0.91
filament_colour=#F0F0F0
first_layer_temperature=240
temperature=240
first_layer_bed_temperature=80
bed_temperature=70
min_fan_speed=100
max_fan_speed=100
bridge_fan_speed=100
disable_fan_first_layers=1
full_fan_speed_layer=3
fan_below_layer_time=60
slowdown_below_layer_time=20
min_print_speed=10
filament_type=PP
filament_max_volumetric_speed=2.5
filament_retract_speed=25
filament_deretract_speed=25
filament_retract_layer_change=0
filament_wipe=nil
filament_notes="Material Description\nUltrafuse PP is high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties make it an ideal material for 3D-printing applications which have to endure high stress or strain. The filament has high chemical resistance and a high isolation value. PP is one of the most used materials in the world, due to its versatility and ability to engineer lightweight tough parts.\n\nPrinting Recommendations:\nApply PP tape or Magigoo PP adhesive to the buildplate for optimal adhesion."
compatible_printers_condition=printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PPGF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nApply PP strapping tape or PPGF adhesive to a clean build plate for optimal adhesion."
compatible_printers_condition=nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Material Description\nTPC 45D is a flexible, shore 45D, rubber-like Thermoplastic Copolyester Elastomer (TPE-C), which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters. The material delivers excellent adhesion in the Z-direction, meaning that the printed layers do not detach - even with extreme deformation.\n\nPrinting Recommendations:\nApply Magigoo Flex to a clean build plate to improve adhesion."
## [filament:Ultrafuse TPS-90A]
## inherits = Ultrafuse TPC-45D
## filament_density = 1.04
## extrusion_multiplier = 1.02
## filament_colour = #FFFFFF
## first_layer_temperature = 270
## temperature = 265
## first_layer_bed_temperature = 30
## bed_temperature = 30
## min_fan_speed = 20
## max_fan_speed = 75
## filament_notes = "Material Description\nUltrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material. Compared to other flexible 3D printing materials it shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material shows a reduced moisture uptake, which allows for printing without pre-drying. Parts printed with Ultrafuse® TPS 90A show almost no visible layers or warpage, which makes it an excellent material choice for end-use parts. Producing multi-material parts is possible by printing it together with ABS.\n\nPrinting Recommendations:\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."
[filament:Ultrafuse TPU-64D]
inherits=Ultrafuse TPC-45D
filament_density=1.16
first_layer_temperature=230
temperature=225
first_layer_bed_temperature=40
bed_temperature=40
min_fan_speed=20
max_fan_speed=100
filament_notes="Material Description\nUltrafuse® TPU 64D is the hardest elastomer in BASF Forward AM’s flexible productline. The material shows a relatively high rigidity while maintaining a certain flexibility. This filament is the perfect match for industrial applications requiring rigid parts being resistant to impact, wear and tear. Due to its property profile, the material can be used as an alternative for parts made from ABS and rubbers. Ultrafuse® TPU 64D is easy to print on direct drive and bowden style printers and is compatible with soluble BVOH support to realize the most complex geometries.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."
[filament:Ultrafuse TPU-85A]
inherits=Ultrafuse TPU-64D
filament_density=1.11
first_layer_temperature=225
temperature=220
filament_notes="Material Description\nUltrafuse® TPU 85A comes in its natural white color. Chemical properties (e.g. resistance against particular substances) and tolerance for solvents can be made available, if these factors are relevant for a specific application. Generally, these properties correspond to publicly available data on polyether based TPUs. This material is not FDA conform. Good flexibility at low temperature, good wear performance and good damping behavior are the key features of Ultrafuse® TPU 85A.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."
[filament:Ultrafuse TPU-95A]
inherits=Ultrafuse TPU-85A
filament_density=1.14
first_layer_temperature=230
temperature=225
filament_notes="Material Description\nUltrafuse® TPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades. Parts printed with Ultrafuse® TPU 95A show a high elongation, good impact resistance, excellent layer adhesion and a good resistance to oils and common industrially used chemicals. Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."
filament_notes="Material Description\nPET is mainly known by the well-known PET bottle material. This recycled has a natural transparent blueish look. It has excellent 3D printing properties and good mechanical characteristics."
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=195
[filament:Prusa ABS]
inherits=*ABSC*
filament_vendor=Made for Prusa
filament_cost=27.82
filament_density=1.08
filament_spool_weight=230
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0"
[filament:Prusament PC Blend Carbon Fiber @MMU2]
inherits=Prusament PC Blend @MMU2
filament_cost=90.73
filament_density=1.16
extrusion_multiplier=1.04
fan_below_layer_time=10
first_layer_temperature=280
temperature=280
disable_fan_first_layers=4
filament_retract_lift=nil
filament_colour=#BBBBBB
compatible_printers_condition=nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=220
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic HIPS]
inherits=*ABS*
filament_vendor=Generic
filament_cost=27.3
filament_density=1.04
bridge_fan_speed=50
cooling=1
extrusion_multiplier=1
fan_always_on=1
fan_below_layer_time=10
filament_colour=#FFFFD7
filament_soluble=1
filament_type=HIPS
first_layer_temperature=230
max_fan_speed=20
min_fan_speed=20
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature=230
compatible_printers_condition=nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa PETG]
inherits=*PET*
renamed_from="Prusa PET"
filament_vendor=Made for Prusa
filament_cost=27.82
filament_density=1.27
filament_spool_weight=230
compatible_printers_condition=nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Verbatim PETG]
inherits=*PET*
filament_vendor=Verbatim
filament_cost=27.90
filament_density=1.27
filament_spool_weight=235
compatible_printers_condition=nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PETG]
inherits=*PET*
filament_vendor=Prusa Polymers
first_layer_temperature=240
temperature=250
filament_cost=36.29
filament_density=1.27
filament_spool_weight=201
filament_type=PETG
compatible_printers_condition=nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa PETG @0.6 nozzle]
inherits=*PET06*
renamed_from="Prusa PET 0.6 nozzle"; "Prusa PETG 0.6 nozzle"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=13
[filament:Generic PETG @MMU2]
inherits=*PET MMU2*
renamed_from="Generic PET MMU2"; "Generic PETG MMU2"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Fiberlogy Easy PLA]
inherits=*PLA*
renamed_from=Fiberlogy PLA
filament_vendor=Fiberlogy
filament_cost=20
filament_density=1.24
first_layer_temperature=220
temperature=220
filament_spool_weight=330
[filament:Fiberlogy Easy PET-G]
inherits=*PET*
renamed_from=Fiberlogy PETG
filament_vendor=Fiberlogy
filament_spool_weight=330
filament_cost=20
filament_density=1.27
compatible_printers_condition=nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes="Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PVB]
inherits=*PLA*
filament_vendor=Prusa Polymers
temperature=215
bed_temperature=75
first_layer_bed_temperature=75
filament_cost=60.48
filament_density=1.09
filament_spool_weight=201
filament_max_volumetric_speed=8
filament_type=PVB
filament_soluble=1
filament_colour=#FFFF6F
compatible_printers_condition=nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time=20
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature=250
[filament:Fillamentum Nylon FX256]
inherits=*common*
filament_vendor=Fillamentum
filament_cost=56.99
filament_density=1.01
filament_spool_weight=230
bed_temperature=90
bridge_fan_speed=30
cooling=1
disable_fan_first_layers=6
fan_always_on=0
fan_below_layer_time=20
min_print_speed=15
slowdown_below_layer_time=20
filament_colour=#DEE0E6
filament_max_volumetric_speed=6
filament_soluble=0
filament_type=NYLON
first_layer_bed_temperature=90
first_layer_temperature=250
max_fan_speed=0
min_fan_speed=0
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{elsif nozzle_diameter[0]==0.8};{else}M900 K48{endif} ; Filament gcode LA 1.0"
temperature=250
[filament:Fiberthree F3 PA Pure Pro]
inherits=*common*
filament_vendor=Fiberthree
filament_cost=200.84
filament_density=1.2
bed_temperature=70
first_layer_bed_temperature=75
first_layer_temperature=270
temperature=270
bridge_fan_speed=30
cooling=1
disable_fan_first_layers=3
fan_always_on=1
fan_below_layer_time=20
min_print_speed=15
slowdown_below_layer_time=10
filament_colour=#DEE0E6
filament_max_volumetric_speed=5
filament_soluble=0
filament_type=NYLON
max_fan_speed=20
min_fan_speed=20
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length=2
filament_retract_speed=40
filament_retract_lift=nil
filament_retract_before_travel=1.5
filament_wipe=0
compatible_printers_condition=printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Fiberthree F3 PA-CF Pro]
inherits=*common*
filament_vendor=Fiberthree
filament_cost=208.1
filament_density=1.25
bed_temperature=70
first_layer_bed_temperature=75
first_layer_temperature=275
temperature=275
bridge_fan_speed=30
cooling=1
disable_fan_first_layers=3
fan_always_on=0
fan_below_layer_time=20
min_print_speed=15
slowdown_below_layer_time=10
filament_colour=#DEE0E6
filament_max_volumetric_speed=5
filament_soluble=0
filament_type=NYLON
max_fan_speed=0
min_fan_speed=0
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length=2
filament_retract_speed=40
filament_retract_lift=nil
filament_retract_before_travel=1.5
filament_wipe=0
compatible_printers_condition=nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Fiberthree F3 PA-GF Pro]
inherits=Fiberthree F3 PA-CF Pro
filament_vendor=Fiberthree
filament_cost=205.68
filament_density=1.27
fan_always_on=1
max_fan_speed=15
min_fan_speed=15
[filament:Taulman T-Glase]
inherits=*PET*
filament_vendor=Taulman
filament_cost=40
filament_density=1.27
bridge_fan_speed=40
cooling=0
fan_always_on=0
first_layer_bed_temperature=90
first_layer_temperature=240
max_fan_speed=5
min_fan_speed=0
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
[filament:Verbatim PLA]
inherits=*PLA*
filament_vendor=Verbatim
filament_cost=42.99
filament_density=1.24
filament_spool_weight=235
[filament:Verbatim BVOH]
inherits=*common*
filament_vendor=Verbatim
filament_cost=193.58
filament_density=1.14
filament_spool_weight=235
bed_temperature=60
bridge_fan_speed=100
cooling=0
disable_fan_first_layers=1
extrusion_multiplier=1
fan_always_on=0
fan_below_layer_time=100
filament_colour=#FFFFD7
filament_max_volumetric_speed=4
filament_soluble=1
filament_type=PVA
first_layer_bed_temperature=60
first_layer_temperature=215
max_fan_speed=100
min_fan_speed=100
start_filament_gcode="M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition=nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
renamed_from="Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI"
## Filaments 0.8 nozzle
[filament:Generic PLA @0.8 nozzle]
inherits=Generic PLA
first_layer_temperature=220
temperature=220
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic ABS @0.8 nozzle]
inherits=Generic ABS
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic PETG @0.8 nozzle]
inherits=Generic PETG
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=20
filament_retract_lift=0.2
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa PLA @0.8 nozzle]
inherits=Prusa PLA
first_layer_temperature=220
temperature=220
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa PETG @0.8 nozzle]
inherits=Prusa PETG
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=20
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusa ABS @0.8 nozzle]
inherits=Prusa ABS
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Generic FLEX @0.8 nozzle]
inherits=Generic FLEX
filament_max_volumetric_speed=4.3
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
[filament:Generic HIPS @0.8 nozzle]
inherits=Generic HIPS
first_layer_temperature=240
temperature=240
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PLA @0.8 nozzle]
inherits=Prusament PLA
first_layer_temperature=225
temperature=225
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PETG @0.8 nozzle]
inherits=Prusament PETG
first_layer_temperature=250
temperature=260
filament_max_volumetric_speed=20
filament_retract_lift=0.2
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament ASA @0.8 nozzle]
inherits=Prusament ASA
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
[filament:Prusament PC Blend @0.8 nozzle]
inherits=Prusament PC Blend
filament_max_volumetric_speed=13
filament_retract_lift=0.25
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material
[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle]
inherits=Prusament PC Blend Carbon Fiber
filament_max_volumetric_speed=13
filament_retract_lift=0.25
compatible_printers_condition=printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
[filament:Prusament PVB @0.8 nozzle]
inherits=Prusament PVB
first_layer_temperature=225
temperature=225
filament_max_volumetric_speed=15
compatible_printers_condition=nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time=20
## Filaments 0.8 nozzle MMU2
[filament:Generic HIPS @MMU2 0.8 nozzle]
inherits=Generic HIPS @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
[filament:Prusament ASA @MMU2 0.8 nozzle]
inherits=Prusament ASA @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
slowdown_below_layer_time=20
filament_max_volumetric_speed=14
[filament:Prusament PC Blend @MMU2 0.8 nozzle]
inherits=Prusament PC Blend @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=12
[filament:Generic PETG @MMU2 0.8 nozzle]
inherits=Generic PETG @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=14
first_layer_temperature=215
temperature=210
[filament:Prusament PLA @MMU2 0.8 nozzle]
inherits=Prusament PLA @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=14
first_layer_temperature=215
temperature=210
[filament:Verbatim BVOH @MMU2 0.8 nozzle]
inherits=Verbatim BVOH @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=8
[filament:PrimaSelect PVA+ @MMU2 0.8 nozzle]
inherits=PrimaSelect PVA+ @MMU2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed=8
## Filaments 0.8 nozzle MINI
[filament:Generic ABS @0.8 nozzle MINI]
inherits=Generic ABS @MINI
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=13
filament_retract_length=3.2
filament_wipe=nil
filament_retract_speed=nil
filament_deretract_speed=nil
filament_retract_lift=nil
filament_retract_before_travel=2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Generic PETG @0.8 nozzle MINI]
inherits=Generic PETG @MINI
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusa PETG @0.8 nozzle MINI]
inherits=Prusa PETG @MINI
first_layer_temperature=240
temperature=250
filament_max_volumetric_speed=15
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusa ABS @0.8 nozzle MINI]
inherits=Prusa ABS @MINI
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=13
slowdown_below_layer_time=20
filament_retract_length=3.2
filament_wipe=nil
filament_retract_speed=nil
filament_deretract_speed=nil
filament_retract_lift=nil
filament_retract_before_travel=2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Generic FLEX @0.8 nozzle MINI]
inherits=Generic FLEX @MINI
filament_max_volumetric_speed=4.3
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament PETG @0.8 nozzle MINI]
inherits=Prusament PETG @MINI
first_layer_temperature=245
temperature=255
filament_max_volumetric_speed=15
filament_retract_lift=0.25
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament ASA @0.8 nozzle MINI]
inherits=Prusament ASA @MINI
first_layer_temperature=265
temperature=265
filament_max_volumetric_speed=13
slowdown_below_layer_time=20
filament_retract_length=3.2
filament_wipe=nil
filament_retract_speed=nil
filament_deretract_speed=nil
filament_retract_lift=nil
filament_retract_before_travel=2
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament PC Blend @0.8 nozzle MINI]
inherits=Prusament PC Blend @MINI
filament_max_volumetric_speed=11
filament_retract_lift=0.25
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MINI]
inherits=Prusament PC Blend Carbon Fiber @MINI
filament_max_volumetric_speed=10
filament_retract_lift=0.25
slowdown_below_layer_time=20
compatible_printers_condition=nozzle_diameter[0]==0.8 and printer_model=="MINI"
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-2 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle]
inherits=Original Prusa i3 MK2.5S MMU2S Single
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
start_gcode=M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow
printer_notes=Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
