reorder supermicro-sc808t stuff

openscad/own/supermicro_sc808t/hdd-holder/box.scad

@@ -0,0 +1,82 @@
+/**
+ * Model that draws a box that can have screws and slots and that can be used as a negative on another box and obtain the difference.
+ * can be used as a negative on another box and obtain the difference.
+ *
+ * @author Joaquín Fernández
+ * @url https://gitlab.com/joaquinfq/openscad/blob/master/Modules/Models/box.scad
+ * @license CC-BY-NC-4.0
+ *
+ * @ @param {Float} width Width of the model to generate.
+ * @ @param {Float} height Height of the model to generate.
+ * @param {Float} length Length of the model to be generated.
+ * @param {Float} thickness Thickness of the block where the model will be inserted.
+ * @param {Float} screw Diameter of the screw to be used.
+ * @param {Float} slot Length of the slot where the screws will be inserted.
+ * @param {Float} tolerance Value to be used to adjust the standard dimensions.
+ * @param {Float[]} side Coordinates of the side holes.
+ * @param {Float[]} bottom Coordinates of the bottom holes.
+ */
+module modelBox(width, height, length, thickness, screw = 0, slot = 0, side = [], bottom = [])
+{
+    cube([ width, height, length ]);
+    // Side holes
+    for (_side = side)
+    {
+        if (slot)
+        {
+            hull()
+            {
+                for (_n = [ - slot / 2, slot / 2 ])
+                {
+                    translate([ width / 2, _side[0], _side[1] + _n ])
+                    {
+                        rotate([ 0, 90, 0 ])
+                        {
+                            cylinder(d = screw, h = width + thickness * 2, center = true);
+                        }
+                    }
+                }
+            }
+        }
+        else
+        {
+            translate([ width / 2, _side[0], _side[1] ])
+            {
+                rotate([ 0, 90, 0 ])
+                {
+                    cylinder(d = screw, h = width + thickness * 2, center = true);
+                }
+            }
+        }
+    }
+    // Bottom holes
+    for (_bottom = bottom)
+    {
+        if (slot)
+        {
+            hull()
+            {
+                for (_n = [ - slot / 2, slot / 2 ])
+                {
+                    translate([ width - _bottom[0], 0, _bottom[1] + _n ])
+                    {
+                        rotate([ 90, 0, 0 ])
+                        {
+                            cylinder(d = screw, h = thickness);
+                        }
+                    }
+                }
+            }
+        }
+        else
+        {
+            translate([ width - _bottom[0], 0, _bottom[1] ])
+            {
+                rotate([ 90, 0, 0 ])
+                {
+                    cylinder(d = screw, h = thickness);
+                }
+            }
+        }
+    }
+}