Merge remote-tracking branch 'refs/remotes/origin/main' into main
commit
d0b46b53dd
|
|
@ -1,3 +1,8 @@
|
|||
min_slic3r_version = 2.4.1-rc1
|
||||
0.1.0 Added Anycubic 4Max Pro 2.0
|
||||
min_slic3r_version = 2.3.2-alpha0
|
||||
0.0.12 Updated Anycubic i3 MEGA(S) profiles.
|
||||
0.0.11 Added bed model and texture for i3 Mega, i3 Mega S.
|
||||
min_slic3r_version = 2.3.1-beta
|
||||
0.0.10 Various updates for Anycubic Mega. Added filament profiles.
|
||||
0.0.9 Updated bed textures
|
||||
|
|
|
|||
|
|
@ -1,3 +1,8 @@
|
|||
min_slic3r_version = 2.4.0-rc
|
||||
0.1.3 Ender-3 S1 improvements.
|
||||
0.1.2 Added alpha Ender 3 S1 profiles.
|
||||
min_slic3r_version = 2.4.0-beta4
|
||||
0.1.1 Added Ender 2 Pro
|
||||
min_slic3r_version = 2.3.2-alpha0
|
||||
0.1.0 Added Ender-7, Sermoon D1, CR-10 SMART
|
||||
min_slic3r_version = 2.3.1-beta
|
||||
|
|
|
|||
|
|
@ -1,4 +1,7 @@
|
|||
min_slic3r_version = 2.4.0-rc
|
||||
1.4.5 Added MMU2/S profiles for 0.25mm nozzle. Updated FW version. Enabled g-code thumbnails for MK3 family printers. Updated end g-code.
|
||||
1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles.
|
||||
1.4.3 Added new filament profiles and SLA materials.
|
||||
1.4.2 Added SLA material profiles.
|
||||
1.4.1 Updated firmware version.
|
||||
1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
|
||||
|
|
@ -22,6 +25,7 @@ min_slic3r_version = 2.4.0-alpha0
|
|||
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
||||
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
||||
min_slic3r_version = 2.3.2-alpha0
|
||||
1.3.7 Updated firmware version.
|
||||
1.3.6 Updated firmware version.
|
||||
1.3.5 Added material profiles for Prusament Resins.
|
||||
1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
|
||||
|
|
@ -30,6 +34,7 @@ min_slic3r_version = 2.3.2-alpha0
|
|||
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
||||
1.3.0 Added SL1S SPEED profiles.
|
||||
min_slic3r_version = 2.3.0-rc1
|
||||
1.2.12 Updated firmware version.
|
||||
1.2.11 Updated firmware version.
|
||||
1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
|
||||
1.2.9 Added material profiles for Prusament Resin.
|
||||
|
|
@ -50,6 +55,7 @@ min_slic3r_version = 2.3.0-alpha4
|
|||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.2.0-alpha0 Added filament spool weights
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
1.1.16 Updated firmware version.
|
||||
1.1.15 Updated firmware version.
|
||||
1.1.14 Updated firmware version.
|
||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,4 +1,5 @@
|
|||
min_slic3r_version = 2.3.2-alpha0
|
||||
0.0.9 Added AzteQ Industrial materials PC/ABS (Fillamentum), PC-Max (Polymaker), Nylon FX256 (Fillamentum), Added DeltiQ 2 materials Nylon PA12 (Fiberlogy), Nylon CF15 Carbon (Fillamentum), PEBA 90A - FlexFill (Fillamentum), MoldLay (Wax-Alike), disabled retract only when crossing perimeters, some minor setting improvements
|
||||
0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements
|
||||
min_slic3r_version = 2.3.0-alpha3
|
||||
0.0.7 Added PLA, PETG profiles for 0.25 nozzle, fixed supports on 0.8 nozzle profile, fixed max volumetric speed, disabled elefant foot compensation
|
||||
|
|
|
|||
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:16 UTC
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 200
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 200
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 50%
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.35
|
||||
first_layer_speed = 30
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.3
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 0
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 20
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 15
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 130
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:16 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 500,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 500,200
|
||||
machine_max_feedrate_y = 500,200
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 10,10
|
||||
machine_max_jerk_y = 10,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 200
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-09-06 at 20:59:15 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20200906T205915Z
|
||||
time_captured = 20200906T205915Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = delta
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.2
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-12 at 05:06:14 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #6432E8
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 0
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-09-24 at 14:30:47 UTC
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 90
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 0
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 62
|
||||
first_layer_temperature = 195
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 195
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 01:57:43 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 50
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-11 at 19:45:55 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nG28 ; home \nM84 ; disable motors\n\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 1.85
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.4
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X-65 Y42 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X-67 Y40 Z0.3 F3000 ; move down\nG1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-12 at 19:12:58 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20201012T191258Z
|
||||
time_captured = 20201012T191258Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = PLA_Noulei-Silk BlueSilver_Silk Blue
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.8
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 13:56:15 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 50
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-11 at 19:45:55 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nG28 ; home \nM84 ; disable motors\n\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 1.85
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.4
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X-65 Y42 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X-67 Y40 Z0.3 F3000 ; move down\nG1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-30 at 21:39:05 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20201030T213905Z
|
||||
time_captured = 20201030T213905Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = PLA_Noulei-Silk Filaments
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.9
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 235
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 230
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-17 at 13:29:52 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 50%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 15
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.3
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 15
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 4
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 4
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.23
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 25
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 222
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-07 at 20:30:02 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.3
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-12-23 at 21:26:23 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20201223T212623Z
|
||||
time_captured = 20201223T212623Z
|
||||
slic3r_version_captured = 2.2.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
filament = PLA_Noulei-Silk Filaments
|
||||
printer = delta
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.10
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,57 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-18 at 11:28:23 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 30
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = PETG-DasFilament_Saphirblau
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 225
|
||||
full_fan_speed_layer = 0
|
||||
inherits =
|
||||
max_fan_speed = 85
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 220
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 235
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 230
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -1,122 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-18 at 22:33:05 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 20
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 15
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 12%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 20
|
||||
ironing_type = top
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 60
|
||||
perimeters = 4
|
||||
post_process =
|
||||
print_settings_id = delta
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.23
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 25
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 222
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-07 at 20:30:02 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0.3
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -1,22 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-21 at 11:46:13 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20210221T114613Z
|
||||
time_captured = 20210221T114613Z
|
||||
slic3r_version_captured = 2.3.0+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
sla_print =
|
||||
filament = PETG-DasFilament_Saphirblau
|
||||
sla_material =
|
||||
printer = delta
|
||||
physical_printer =
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.1.11
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,57 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-27 at 05:24:47 UTC
|
||||
bed_temperature = 75
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.99
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 30
|
||||
filament_colour = #1730DD
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 25
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = PETG-DasFilament_Saphirblau
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 70
|
||||
first_layer_temperature = 235
|
||||
full_fan_speed_layer = 3
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 240
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.97
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 72
|
||||
first_layer_temperature = 235
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 230
|
||||
|
|
@ -1,57 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 14:26:28 UTC
|
||||
bed_temperature = 65
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #0EFB7C
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 65
|
||||
first_layer_temperature = 200
|
||||
full_fan_speed_layer = 0
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 195
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #000000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 20
|
||||
filament_density = 1.18
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 192
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 190
|
||||
|
|
@ -1,57 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-20 at 21:08:45 UTC
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = (Unknown)
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 65
|
||||
first_layer_temperature = 200
|
||||
full_fan_speed_layer = 0
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 200
|
||||
|
|
@ -1,122 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 1
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.92
|
||||
bridge_speed = 50
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.4
|
||||
external_perimeter_speed = 40
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.4
|
||||
fill_angle = 45
|
||||
fill_density = 30%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.45
|
||||
first_layer_height = 0.25
|
||||
first_layer_speed = 30
|
||||
gap_fill_speed = 30
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 13%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 20
|
||||
ironing_type = top
|
||||
layer_height = 0.25
|
||||
max_print_speed = 100
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.4
|
||||
perimeter_speed = 60
|
||||
perimeters = 4
|
||||
post_process =
|
||||
print_settings_id = delta
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 4
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.25
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 80
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 30
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 1
|
||||
travel_speed = 200
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,114 +0,0 @@
|
|||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.91
|
||||
bridge_speed = 100
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.42
|
||||
external_perimeter_speed = 100
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.44
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = cubic
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.44
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 40
|
||||
gap_fill_speed = 100
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.44
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 30%
|
||||
infill_speed = 100
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.44
|
||||
perimeter_speed = 100
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 100
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.44
|
||||
solid_infill_speed = 100
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 1.5
|
||||
support_material_speed = 100
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 20
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.44
|
||||
top_solid_infill_speed = 100
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 250
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,122 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 10:26:16 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 0
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = stars
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 30
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
layer_height = 0.3
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 10
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 30
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 130
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-31 at 16:56:56 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
|
||||
between_objects_gcode =
|
||||
color_change_gcode = M600
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S60; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #019B9B
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_limits_usage = emit_to_gcode
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,9000
|
||||
machine_max_acceleration_y = 9000,9000
|
||||
machine_max_acceleration_z = 9000,9000
|
||||
machine_max_feedrate_e = 250,250
|
||||
machine_max_feedrate_x = 1500,1500
|
||||
machine_max_feedrate_y = 1500,1500
|
||||
machine_max_feedrate_z = 1500,1500
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 9,9
|
||||
machine_max_jerk_y = 9,9
|
||||
machine_max_jerk_z = 9,9
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 196
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = M601
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 10%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.15
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 150
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 35
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
|
||||
template_custom_gcode =
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-22 at 23:05:45 UTC
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 0x0,177x0,177x175,0x175
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
color_change_gcode = M600
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile =
|
||||
default_print_profile =
|
||||
deretract_speed = 0
|
||||
end_gcode = M104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nM84 ; disable motors\nM106 S255 ; Cooldown Hotend\nG4 S30 ; wait 30secs\nM107 ; turn off Fan \n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_limits_usage = emit_to_gcode
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 500,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 500,200
|
||||
machine_max_feedrate_y = 500,200
|
||||
machine_max_feedrate_z = 5,5
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 10,10
|
||||
machine_max_jerk_y = 10,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 145
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = M601
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.1
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 ; home all axes\nG1 X0 Y0 Z3 F2500 ; lift nozzle\nG92 E0 ;Reset Extruder\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature] ; wait for nozzle\nG1 X1 Y0 Z[first_layer_height] F5000.0\nG1 X150 Y0 F1500.0 E12 ; Draw line\nG1 X150 Y5 F5000 ; wipe\nG1 Z1 F2500; lift\nG92 E0; reset Extruder
|
||||
template_custom_gcode =
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-12 at 22:59:14 UTC
|
||||
|
||||
[snapshot]
|
||||
id = 20211112T225913Z
|
||||
time_captured = 20211112T225913Z
|
||||
slic3r_version_captured = 2.3.3+linux-x64
|
||||
comment =
|
||||
reason = upgrade
|
||||
|
||||
[presets]
|
||||
print = delta
|
||||
sla_print =
|
||||
filament = PETG-DasFilament_Saphirblau
|
||||
sla_material =
|
||||
printer = delta
|
||||
physical_printer =
|
||||
|
||||
[Vendor:PrusaResearch]
|
||||
version = 1.2.4
|
||||
min_slic3r_version = 2.3.0-rc1
|
||||
max_slic3r_version = 2147483647.2147483647.2147483647
|
||||
model_MINI = 0.25;0.4;0.6
|
||||
model_MK3S = 0.4
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,5 @@
|
|||
.pio
|
||||
.vscode/.browse.c_cpp.db*
|
||||
.vscode/c_cpp_properties.json
|
||||
.vscode/launch.json
|
||||
.vscode/ipch
|
||||
|
|
@ -2217,7 +2217,7 @@
|
|||
#define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
|
||||
|
||||
#if AXIS_IS_TMC(X)
|
||||
#define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT 750 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
|
||||
#define X_MICROSTEPS 16 // 0..256 changed
|
||||
#define X_RSENSE 0.11
|
||||
|
|
@ -2225,7 +2225,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(X2)
|
||||
#define X2_CURRENT 650
|
||||
#define X2_CURRENT 750
|
||||
#define X2_CURRENT_HOME X2_CURRENT
|
||||
#define X2_MICROSTEPS 16
|
||||
#define X2_RSENSE 0.11
|
||||
|
|
@ -2233,7 +2233,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Y)
|
||||
#define Y_CURRENT 650
|
||||
#define Y_CURRENT 750
|
||||
#define Y_CURRENT_HOME Y_CURRENT
|
||||
#define Y_MICROSTEPS 16 //changed
|
||||
#define Y_RSENSE 0.11
|
||||
|
|
@ -2241,7 +2241,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Y2)
|
||||
#define Y2_CURRENT 650
|
||||
#define Y2_CURRENT 750
|
||||
#define Y2_CURRENT_HOME Y2_CURRENT
|
||||
#define Y2_MICROSTEPS 16
|
||||
#define Y2_RSENSE 0.11
|
||||
|
|
@ -2249,7 +2249,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z)
|
||||
#define Z_CURRENT 650
|
||||
#define Z_CURRENT 750
|
||||
#define Z_CURRENT_HOME Z_CURRENT
|
||||
#define Z_MICROSTEPS 16 //changed
|
||||
#define Z_RSENSE 0.11
|
||||
|
|
@ -2257,7 +2257,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z2)
|
||||
#define Z2_CURRENT 650
|
||||
#define Z2_CURRENT 750
|
||||
#define Z2_CURRENT_HOME Z2_CURRENT
|
||||
#define Z2_MICROSTEPS 16
|
||||
#define Z2_RSENSE 0.11
|
||||
|
|
@ -2265,7 +2265,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z3)
|
||||
#define Z3_CURRENT 650
|
||||
#define Z3_CURRENT 750
|
||||
#define Z3_CURRENT_HOME Z3_CURRENT
|
||||
#define Z3_MICROSTEPS 16
|
||||
#define Z3_RSENSE 0.11
|
||||
|
|
@ -2273,7 +2273,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z4)
|
||||
#define Z4_CURRENT 650
|
||||
#define Z4_CURRENT 750
|
||||
#define Z4_CURRENT_HOME Z4_CURRENT
|
||||
#define Z4_MICROSTEPS 16
|
||||
#define Z4_RSENSE 0.11
|
||||
|
|
@ -2281,7 +2281,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E0)
|
||||
#define E0_CURRENT 650 //changed
|
||||
#define E0_CURRENT 750 //changed
|
||||
#define E0_MICROSTEPS 16 //changed
|
||||
#define E0_RSENSE 0.11
|
||||
#define E0_CHAIN_POS -1
|
||||
|
|
|
|||
Binary file not shown.
Loading…
Reference in New Issue