Merge branch 'main' of ssh://git.kostianix.de:2222/zeus/3d-stuff into main

PrusaSlicer/.gitignore

@@ -0,0 +1,2 @@
+snapshots/*
+cache/*

PrusaSlicer/filament/PLA_Noulei-Silk Filaments.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
+# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-05-15 at 12:12:32 UTC
 bed_temperature = 55
 bridge_fan_speed = 100
 compatible_printers = 
@@ -37,6 +37,7 @@ filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
+filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = PLA
 filament_unload_time = 0
@@ -45,11 +46,12 @@ filament_unloading_speed_start = 100
 filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 55
-first_layer_temperature = 192
+first_layer_temperature = 200
+full_fan_speed_layer = 0
 inherits = 
 max_fan_speed = 100
 min_fan_speed = 40
 min_print_speed = 10
 slowdown_below_layer_time = 8
 start_filament_gcode = "; Filament gcode\n"
-temperature = 190
+temperature = 200

PrusaSlicer/filament/PLA_Sunlu_Grasgruen.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-05-17 at 21:53:02 UTC
+bed_temperature = 55
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.98
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #10AC48
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 20
+filament_density = 1.18
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 55
+first_layer_temperature = 210
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 40
+min_print_speed = 10
+slowdown_below_layer_time = 8
+start_filament_gcode = "; Filament gcode\n"
+temperature = 205

filaments.md

@@ -2,12 +2,13 @@
 
 | Make	| Material	| Color/Code		| Dia		| Price/Volume 	| Notes				| 3dprintingdb 	| 
 |---		|---		|---				|---		|--:			|---					|---			|
-| Noulei	| PLA  	| Silk Black / #24  	| 1.75mm	| 26,99€/1kg	| 190°C, better layer bond as other silk filaments from same vendor | N/A |
+| Noulei	| PLA  	| Silk Black / #24  	| 1.75mm	| 26,99€/1kg	| 190-200°C, better layer bond as other silk filaments from same vendor, multiplier: 0.95 | N/A |
-| Noulei	| PLA  	| Silk Blue / #11		| 1.75mm	| 26,99€/1kg	| 190°C, Shiny tortoise/light blue	| N/A |
+| Noulei	| PLA  	| Silk Blue / #11		| 1.75mm	| 26,99€/1kg	| 190-200°C, Shiny tortoise/light blue	| N/A |
-| Noulei	| PLA  	| Silk Silver Blue / #14| 1.75mm	| 26,99€/1kg	| 190°C, Shiny purple 		| N/A |
+| Noulei	| PLA  	| Silk Silver Blue / #14| 1.75mm	| 26,99€/1kg	| 190-200°C, Shiny purple 		| N/A |
 | GEEETECH	| PLA  	| Black / 700-001-0426 / Y2005 | 1.75mm | 24,99€/1kg	| 					| N/A |
 | GEEETECH	| PLA		| Silk Silver		| 1.75mm	| 26,99€/1kg	| 					| N/A |
 | TINMORRY	| PETG	| White			| 1,75mm	| 18,88€/1kg	| 235°C/75°C, very strong layer bond | [link](https://3dprintingdb.com/filament/928/tinmorry-petg-white) |  
+| Sunlu	| PLA		| Grasgruen			| 1,75mm	| 18,49€/1kg	| 210°C/205°C, slightly more dense than noulei (multiplier ~0.98)
 | DasFilament | PETG	| Silber			| 1,75mm	| 22,37€/850g(refill) | 235°C/75°C, with sparkles | N/A |
 | DasFilament | PETG	| Saphirblau		| 1,75mm	| 21,41€/800g	| 225°C/75°C, needs less temp than others! | [link](https://3dprintingdb.com/filament/662/das-filament-petg-saphirblau) |
 | DasFilament | PETG	| Rubinrot			| 1,75mm	| 18,88€/850g(refill) | TBD | [link](https://3dprintingdb.com/filament/663/das-filament-petg-rubinrot) |