prusaslicer profiles

PrusaSlicer/PrusaSlicer.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-11-11 at 12:44:17 UTC
+# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-16 at 10:37:16 UTC
 auto_toolbar_size = 100
 autocenter = 0
 background_processing = 0
@@ -28,12 +28,12 @@ use_custom_toolbar_size = 0
 use_free_camera = 0
 use_inches = 0
 use_perspective_camera = 0
-version = 2.3.0+linux-x64
+version = 2.3.3+linux-x64
 version_check = 1
-version_online = 2.3.0
+version_online = 2.3.3
-version_online_seen = 2.3.0
+version_online_seen = 2.3.3
 view_mode = expert
-window_mainframe = 2560; 30; 2556; 1385; 0
+window_mainframe = 0; 30; 2556; 1385; 0
 
 [filaments]
 Generic ABS = 1
@@ -54,18 +54,28 @@ filament = PETG-DasFilament_Saphirblau
 physical_printer = 
 print = delta
 printer = delta
-sla_material = 
+sla_material = Prusa Orange Tough @0.025
-sla_print = 
+sla_print = 0.025 UltraDetail
 
 [recent]
 config_directory = /home/knki1108/Downloads/3d/calibration/models
-skein_directory = /home/knki1108/smb4k/BACKUP.GLA.KOSTIANIX.DE/austausch/Wargaming/Miniaturen (sonstige)/eigene/parametric wargaming base
+skein_directory = /home/knki1108/smb4k/BACKUP.GLA.KOSTIANIX.DE/austausch/Wargaming/One Page Rules - Age of Fantasy/Miniaturen/Mummified Undead/Guardian Statues/Large (46mm)
 
 [recent_projects]
 1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf
 2 = /home/knki1108/Downloads/3d/calibration/models/3DBenchy.3mf
 3 = /home/kostiank/Bilder/anderes/print issues top surface/kossel_2020_shells_plain.3mf
 
+[sla_materials]
+Prusa Orange Tough @0.025 = 1
+Prusa Orange Tough @0.035 = 1
+Prusa Orange Tough @0.05 = 1
+Prusa Orange Tough @0.1 = 1
+Prusament Resin Tough Prusa Orange @0.025 = 1
+Prusament Resin Tough Prusa Orange @0.05 = 1
+Prusament Resin Tough Prusa Orange @0.1 = 1
+
 [vendor:PrusaResearch]
 model:MINI = 0.25;0.4;0.6
 model:MK3S = 0.4
+

PrusaSlicer/cache/Anycubic.idx

@@ -1,8 +1,13 @@
+min_slic3r_version = 2.3.1-beta
+0.0.10 Various updates for Anycubic Mega. Added filament profiles.
+0.0.9 Updated bed textures
 min_slic3r_version = 2.3.0-beta2
+0.0.8 Updated start and end g-code for Anycubic Mega.
+0.0.7 Updated start g-code for Anycubic Mega.
 0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel.
 0.0.5 Updated end g-code.
 min_slic3r_version = 2.3.0-alpha2
-0.0.4 Fixed predator output filaname format, infill overlap.
+0.0.4 Fixed predator output filename format, infill overlap, start gcode adjustments.
 0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator
 0.0.2 Added Anycubic Predator
 min_slic3r_version = 2.3.0-alpha0

PrusaSlicer/cache/Creality.idx

@@ -1,4 +1,12 @@
+min_slic3r_version = 2.3.2-alpha0
+0.1.0 Added Ender-7, Sermoon D1, CR-10 SMART
+min_slic3r_version = 2.3.1-beta
+0.0.17 Updated start g-code. Added specific start g-code for straingauge printers. Improved output filename format. Added filament profile.
+0.0.16 Updated CR6-SE start g-code. Added and updated filament profiles.
+0.0.15 Added new printer models, filament profiles. Various improvements.
 min_slic3r_version = 2.3.0-rc2
+0.0.14 Optimized start g-code. Added filament profile. Various improvements.
+0.0.13 Optimized start and end g-code. General improvements.
 0.0.12 Added Ender-3V2 and filament profiles.
 min_slic3r_version = 2.3.0-beta2
 0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.

PrusaSlicer/cache/PrusaResearch.ini

@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.2.10
+config_version = 1.3.3
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -125,6 +125,15 @@ bed_model = sl1_bed.stl
 bed_texture = sl1.svg
 default_materials = Prusa Orange Tough @0.05; Prusament Resin Tough Prusa Orange @0.05
 
+[printer_model:SL1S]
+name = Original Prusa SL1S SPEED
+variants = default
+technology = SLA
+family = SL1
+bed_model = sl1s_bed.stl
+bed_texture = sl1s.svg
+default_materials = Prusa Orange Tough @0.05 SL1S; Prusament Resin Tough Prusa Orange @0.05 SL1S
+
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
@@ -4834,6 +4843,14 @@ support_pillar_widening_factor = 0
 supports_enable = 1
 support_small_pillar_diameter_percent = 60%
 
+[sla_print:*SL1S*]
+inherits = *common*
+support_head_front_diameter = 0.5
+support_head_penetration = 0.5
+support_pillar_diameter = 1
+output_filename_format = [input_filename_base].sl1s
+compatible_printers_condition = printer_model=="SL1S"
+
 # SL1 #
 
 [sla_print:0.025 UltraDetail]
@@ -4856,6 +4873,23 @@ support_head_front_diameter = 0.5
 support_head_penetration = 0.5
 support_pillar_diameter = 1.3
 
+# SL1S #
+
+[sla_print:0.025 UltraDetail @SL1S]
+inherits = *SL1S*
+layer_height = 0.025
+support_head_width = 3
+
+[sla_print:0.05 Normal @SL1S]
+inherits = *SL1S*
+layer_height = 0.05
+
+[sla_print:0.1 Fast @SL1S]
+inherits = *SL1S*
+layer_height = 0.1
+support_head_front_diameter = 0.6
+support_head_penetration = 0.6
+
 ########### Materials
 
 [sla_material:*common*]
@@ -4891,6 +4925,29 @@ exposure_time = 20
 initial_exposure_time = 45
 initial_layer_height = 0.1
 
+[sla_material:*0.025_sl1s*]
+inherits = *common*
+compatible_prints_condition = layer_height == 0.025
+compatible_printers_condition = printer_model=="SL1S"
+exposure_time = 1.3
+initial_exposure_time = 25
+initial_layer_height = 0.025
+
+[sla_material:*0.05_sl1s*]
+inherits = *common*
+compatible_printers_condition = printer_model=="SL1S"
+exposure_time = 1.7
+initial_exposure_time = 25
+
+[sla_material:*0.1_sl1s*]
+inherits = *common*
+compatible_prints_condition = layer_height == 0.1
+compatible_printers_condition = printer_model=="SL1S"
+exposure_time = 2.6
+initial_exposure_time = 25
+initial_layer_height = 0.1
+
+
 ########### Materials 0.025
 
 [sla_material:3DM-ABS @0.025]
@@ -5085,7 +5142,6 @@ material_type = Tough
 material_vendor = Prusa Polymers
   
 ## Prusa 0.025
-  
 [sla_material:Prusa Orange Tough @0.025]
 inherits = *common 0.025*
 exposure_time = 6
@@ -6161,6 +6217,642 @@ initial_exposure_time = 35
 material_type = Tough
 material_vendor = Made for Prusa
 
+## SL1S materials ##
+
+## 0.025 SL1S
+
+## Prusa Polymers 0.025
+
+[sla_material:Prusament Resin Tough Prusa Orange @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Rich Black @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Anthracite Grey @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+## Made for Prusa 0.025
+
+[sla_material:Prusa Orange Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White ABS like @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Azure Blue Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Black Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Cyan Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Magenta Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Maroon Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Pink Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Blue Flexible @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey High Tenacity @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Vibrant Orange Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Deep Blue Transparent Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Green Dental Casting @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 3
+initial_exposure_time = 50
+material_type = Casting
+material_vendor = Made for Prusa
+
+[sla_material:PrimaCreator Tough Light Grey @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Tough Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Tough White @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Flex Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Water Washable Transparent @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:DruckWege Type D Dental Model @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.2
+initial_exposure_time = 15
+material_type = Dental
+material_vendor = DruckWege
+
+[sla_material:DruckWege Type D Standard White @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.6
+initial_exposure_time = 15
+material_type = Tough
+material_vendor = DruckWege
+
+[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 15
+material_type = Tough
+material_vendor = DruckWege
+
+[sla_material:3DM-ABS Orange @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:3DM-TOUGH Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:Peopoly Deft White @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+[sla_material:Peopoly Neo Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+## 0.05 SL1S
+
+## Prusa Polymers 0.05
+
+[sla_material:Prusament Resin Tough Prusa Orange @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Rich Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Anthracite Grey @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+## Made for Prusa 0.05
+
+[sla_material:Prusa Orange Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White ABS like @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Azure Blue Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Black Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Cyan Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Magenta Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Maroon Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Pink Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Blue Flexible @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey High Tenacity @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Vibrant Orange Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Deep Blue Transparent Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Green Dental Casting @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4
+initial_exposure_time = 50
+material_type = Casting
+material_vendor = Made for Prusa
+
+[sla_material:PrimaCreator Tough Light Grey @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Tough Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Tough White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Flex Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Water Washable Transparent @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:DruckWege Type D Dental Model @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 1.4
+initial_exposure_time = 15
+material_type = Dental
+material_vendor = DruckWege
+
+[sla_material:DruckWege Type D Standard White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 15
+material_type = Tough
+material_vendor = DruckWege
+
+[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 15
+material_type = Tough
+material_vendor = DruckWege
+
+[sla_material:3DM-ABS Orange @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:3DM-TOUGH Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:Peopoly Deft White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+[sla_material:Peopoly Neo Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+## 0.1 SL1S
+
+## Prusa Polymers 0.1
+
+[sla_material:Prusament Resin Tough Prusa Orange @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Rich Black @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+[sla_material:Prusament Resin Tough Anthracite Grey @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+
+## Made for Prusa 0.1
+
+[sla_material:Prusa Orange Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White ABS like @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Azure Blue Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Black Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Cyan Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Magenta Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Maroon Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Pink Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Blue Flexible @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey High Tenacity @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Vibrant Orange Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 10
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Deep Blue Transparent Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 10
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Green Dental Casting @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 8
+initial_exposure_time = 50
+material_type = Casting
+material_vendor = Made for Prusa
+
+[sla_material:PrimaCreator Tough Light Grey @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Tough Clear @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Tough White @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Flex Clear @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = PrimaCreator
+
+[sla_material:PrimaCreator Water Washable Transparent @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = PrimaCreator
+
+[sla_material:DruckWege Type D Dental Model @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 15
+material_type = Dental
+material_vendor = DruckWege
+
+[sla_material:3DM-ABS Orange @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:3DM-TOUGH Clear @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:Peopoly Deft White @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+[sla_material:Peopoly Neo Clear @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
 [printer:*common*]
 printer_technology = FFF
 bed_shape = 0x0,250x0,250x210,0x210
@@ -6223,6 +6915,7 @@ printer_model = MK2S
 printer_variant = 0.4
 default_print_profile = 0.15mm OPTIMAL
 default_filament_profile = Prusament PLA
+color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
 
 [printer:*multimaterial*]
 inherits = *common*
@@ -6279,6 +6972,7 @@ variable_layer_height = 1
 printer_variant = 0.25
 retract_lift = 0.15
 default_print_profile = 0.10mm DETAIL 0.25 nozzle
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK2S 0.6 nozzle]
 inherits = *common*
@@ -6287,6 +6981,7 @@ min_layer_height = 0.1
 nozzle_diameter = 0.6
 printer_variant = 0.6
 default_print_profile = 0.20mm NORMAL @0.6 nozzle
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 # XXXXXXXXXXXXXXXXXXX
 # XXX--- MK2MM ---XXX
@@ -6357,6 +7052,7 @@ machine_max_jerk_e = 4.5
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK2.5 MMU2 Single]
 inherits = Original Prusa i3 MK2.5; *mm2*
@@ -6494,6 +7190,7 @@ retract_length = 1
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
 inherits = Original Prusa i3 MK2.5S MMU2S Single
@@ -6503,6 +7200,7 @@ min_layer_height = 0.1
 nozzle_diameter = 0.6
 printer_variant = 0.6
 default_print_profile = 0.20mm NORMAL @0.6 nozzle
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle]
 inherits = Original Prusa i3 MK2.5S MMU2S Single
@@ -6514,6 +7212,7 @@ printer_variant = 0.25
 retract_lift = 0.15
 default_print_profile = 0.10mm DETAIL 0.25 nozzle
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK2.5S MMU2S]
 inherits = Original Prusa i3 MK2.5; *mm2s*
@@ -6556,6 +7255,7 @@ max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
 default_print_profile = 0.20mm NORMAL @0.6 nozzle
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle]
 inherits = Original Prusa i3 MK2.5 MMU2
@@ -6564,6 +7264,7 @@ max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
 default_print_profile = 0.20mm NORMAL @0.6 nozzle
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 ## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment.
 
@@ -6628,6 +7329,7 @@ printer_variant = 0.25
 retract_lift = 0.15
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3 0.6 nozzle]
 inherits = Original Prusa i3 MK3
@@ -6637,6 +7339,7 @@ min_layer_height = 0.15
 printer_variant = 0.6
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3 0.8 nozzle]
 inherits = Original Prusa i3 MK3
@@ -6648,6 +7351,7 @@ retract_length = 1
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3S & MK3S+]
 inherits = Original Prusa i3 MK3
@@ -6710,6 +7414,7 @@ min_layer_height = 0.15
 printer_variant = 0.6
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle]
 inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle
@@ -6722,6 +7427,7 @@ retract_length = 1
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle]
 inherits = Original Prusa i3 MK3 MMU2 Single
@@ -6733,6 +7439,7 @@ printer_variant = 0.25
 retract_lift = 0.15
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3 MMU2]
 inherits = *mm2*
@@ -6763,6 +7470,7 @@ min_layer_height = 0.15
 printer_variant = 0.6
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle]
 inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle
@@ -6775,6 +7483,7 @@ retract_length = 1
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
+color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle]
 inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
@@ -6787,6 +7496,7 @@ printer_variant = 0.25
 retract_lift = 0.15
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
+color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S]
 inherits = *mm2s*
@@ -6808,6 +7518,7 @@ min_layer_height = 0.15
 printer_variant = 0.6
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle]
 inherits = Original Prusa i3 MK3 MMU2
@@ -6817,6 +7528,7 @@ min_layer_height = 0.15
 printer_variant = 0.6
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
+color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
 
 ## 0.8mm nozzle MMU2/S printer profiles
 
@@ -6887,9 +7599,10 @@ retract_layer_change = 1
 silent_mode = 0
 remaining_times = 1
 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
-end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
+end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
 extruder_colour = 
+color_change_gcode = M600
 
 [printer:Original Prusa MINI & MINI+ 0.25 nozzle]
 inherits = Original Prusa MINI & MINI+
@@ -6912,7 +7625,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
-retract_length = 3.5
+retract_length = 3.2
 retract_before_travel = 1.5
 
 [printer:Original Prusa MINI & MINI+ 0.8 nozzle]
@@ -6947,6 +7660,36 @@ max_initial_exposure_time = 300
 printer_correction = 1,1,1
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
 
+[printer:Original Prusa SL1S SPEED]
+printer_technology = SLA
+printer_model = SL1S
+printer_variant = default
+default_sla_material_profile = Prusa Orange Tough @0.05 SL1S
+default_sla_print_profile = 0.05 Normal @SL1S
+thumbnails = 400x400,800x480
+bed_shape = 0.5x0.5,127.5x0.5,127.5x80.5,0.5x80.5
+display_height = 81
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = portrait
+display_pixels_x = 2560
+display_pixels_y = 1620
+display_width = 128
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 2.5
+slow_tilt_time = 5
+gamma_correction = 1
+max_print_height = 150
+min_exposure_time = 1
+max_exposure_time = 120
+min_initial_exposure_time = 1
+max_initial_exposure_time = 300
+printer_correction = 1,1,1
+relative_correction = 1,1
+area_fill = 45
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1S\n
+
 # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
 [obsolete_presets]
 print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"

PrusaSlicer/cache/TriLAB.idx

@@ -1,4 +1,7 @@
+min_slic3r_version = 2.3.2-alpha0
+0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements
 min_slic3r_version = 2.3.0-alpha3
+0.0.7 Added PLA, PETG profiles for 0.25 nozzle, fixed supports on 0.8 nozzle profile, fixed max volumetric speed, disabled elefant foot compensation
 0.0.6 Added material TPU 93A (SMARTFIL)
 0.0.5 Removed obsolete host keys.
 0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials

PrusaSlicer/printer/Elegoo Mars 2 Pro.ini

@@ -0,0 +1,38 @@
+# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-12 at 23:01:23 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02
+default_sla_material_profile = Prusa Orange Tough @0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 68.04
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = portrait
+display_pixels_x = 2560
+display_pixels_y = 1440
+display_width = 120.96
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+host_type = octoprint
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 150
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480

PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-DasFilament_Saphirblau.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-27 at 05:24:47 UTC
+bed_temperature = 75
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.99
+fan_always_on = 1
+fan_below_layer_time = 30
+filament_colour = #1730DD
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 25
+filament_density = 1.18
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = PETG-DasFilament_Saphirblau
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 70
+first_layer_temperature = 235
+full_fan_speed_layer = 3
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n"
+temperature = 240

PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-Tinmorry White.ini

@@ -0,0 +1,55 @@
+# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
+bed_temperature = 70
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.97
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #000000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 20
+filament_density = 1.18
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 72
+first_layer_temperature = 235
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 8
+start_filament_gcode = "; Filament gcode\n"
+temperature = 230

PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Geetech_Black.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 14:26:28 UTC
+bed_temperature = 65
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.95
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #0EFB7C
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 20
+filament_density = 1.18
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 65
+first_layer_temperature = 200
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 8
+start_filament_gcode = "; Filament gcode\n"
+temperature = 195

PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Noulei-Silk Filaments.ini

@@ -0,0 +1,55 @@
+# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
+bed_temperature = 55
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.95
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #000000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 20
+filament_density = 1.18
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 55
+first_layer_temperature = 192
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 40
+min_print_speed = 10
+slowdown_below_layer_time = 8
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

PrusaSlicer/snapshots/20211112T225913Z/filament/sparky.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-20 at 21:08:45 UTC
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 65
+first_layer_temperature = 200
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 200

PrusaSlicer/snapshots/20211112T225913Z/print/delta.ini

@@ -0,0 +1,122 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 1
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 0.92
+bridge_speed = 50
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.4
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.4
+fill_angle = 45
+fill_density = 30%
+fill_pattern = cubic
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.25
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 13%
+ironing_spacing = 0.1
+ironing_speed = 20
+ironing_type = top
+layer_height = 0.25
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 10
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.4
+perimeter_speed = 60
+perimeters = 4
+post_process = 
+print_settings_id = delta
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 4
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 50%
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 100
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.25
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear-grid
+support_material_spacing = 2
+support_material_speed = 80
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 1
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_layers = 4
+top_solid_min_thickness = 1
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/snapshots/20211112T225913Z/print/delta_speed-draft_100mm.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 0.91
+bridge_speed = 100
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.42
+external_perimeter_speed = 100
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.44
+fill_angle = 45
+fill_density = 15%
+fill_pattern = cubic
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.44
+first_layer_height = 0.3
+first_layer_speed = 40
+gap_fill_speed = 100
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.44
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 30%
+infill_speed = 100
+inherits = 
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 200
+max_volumetric_speed = 0
+min_skirt_length = 10
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.44
+perimeter_speed = 100
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 100
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.44
+solid_infill_speed = 100
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 100
+support_material_synchronize_layers = 0
+support_material_threshold = 20
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thin_walls = 1
+threads = 8
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.44
+top_solid_infill_speed = 100
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_speed = 250
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/snapshots/20211112T225913Z/print/sparky.ini

@@ -0,0 +1,122 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 10:26:16 UTC
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.3
+first_layer_speed = 30
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.3
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 10
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thin_walls = 1
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 20
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_speed = 130
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/snapshots/20211112T225913Z/printer/delta.ini

@@ -0,0 +1,77 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-31 at 16:56:56 UTC
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
+before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = ""
+default_print_profile = 
+deretract_speed = 0
+end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S60; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
+extra_loading_move = -2
+extruder_colour = #019B9B
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_x = 9000,9000
+machine_max_acceleration_y = 9000,9000
+machine_max_acceleration_z = 9000,9000
+machine_max_feedrate_e = 250,250
+machine_max_feedrate_x = 1500,1500
+machine_max_feedrate_y = 1500,1500
+machine_max_feedrate_z = 1500,1500
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 9,9
+machine_max_jerk_y = 9,9
+machine_max_jerk_z = 9,9
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 196
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 2
+retract_before_wipe = 10%
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0.15
+retract_lift_above = 0
+retract_lift_below = 150
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+silent_mode = 1
+single_extruder_multi_material = 0
+start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0

PrusaSlicer/snapshots/20211112T225913Z/printer/sparky.ini

@@ -0,0 +1,77 @@
+# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-22 at 23:05:45 UTC
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,177x0,177x175,0x175
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 0
+end_gcode = M104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nG28 X0  ; home X axis\nM84     ; disable motors\nM106 S255 ; Cooldown Hotend\nG4 S30 ; wait 30secs\nM107 ; turn off Fan \n
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_x = 9000,1000
+machine_max_acceleration_y = 9000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 5,5
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 145
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0.1
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 1
+single_extruder_multi_material = 0
+start_gcode = G28 ; home all axes\nG1 X0 Y0 Z3 F2500 ; lift nozzle\nG92 E0 ;Reset Extruder\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature] ; wait for nozzle\nG1 X1 Y0 Z[first_layer_height] F5000.0\nG1 X150 Y0 F1500.0 E12 ; Draw line\nG1 X150 Y5 F5000 ; wipe\nG1 Z1 F2500; lift\nG92 E0; reset Extruder
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0

PrusaSlicer/snapshots/20211112T225913Z/snapshot.ini

@@ -0,0 +1,23 @@
+# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-12 at 22:59:14 UTC
+
+[snapshot]
+id = 20211112T225913Z
+time_captured = 20211112T225913Z
+slic3r_version_captured = 2.3.3+linux-x64
+comment = 
+reason = upgrade
+
+[presets]
+print = delta
+sla_print = 
+filament = PETG-DasFilament_Saphirblau
+sla_material = 
+printer = delta
+physical_printer = 
+
+[Vendor:PrusaResearch]
+version = 1.2.4
+min_slic3r_version = 2.3.0-rc1
+max_slic3r_version = 2147483647.2147483647.2147483647
+model_MINI = 0.25;0.4;0.6
+model_MK3S = 0.4

openscad/own/parametric wargaming base/wagaming_base.scad

@@ -1,17 +0,0 @@
-// Inverted Wargaming base
-// by zeus - 2021-11-11 - CC-BY-NC-SA-4.0
-// ###
-// Variables
-base_lower_dia=32; //diameter in mm
-base_upper_dia=30; //upper diameter
-cutout_dia=base_upper_dia-1.6; //adjusted for 2 walls on 0.4 nozzle (0.4*2*2)
-base_h=4; //overall height
-mt=1.5; //bottom thickness, suitable for 0.3 and 0.5 layers
-$fn=150;
-//
-// ###
-// Model
-difference(){
-    cylinder(r1=base_lower_dia/2, r2=base_upper_dia/2, h=base_h);
-    translate([0,0,mt]) #cylinder(r=cutout_dia/2, h=base_h-mt+0.1);
-}