refined helix

.gitignore

@@ -1 +0,0 @@
-PrusaSlicer/cache/*

PrusaSlicer/.gitignore

@@ -1,2 +0,0 @@
-snapshots/*
-cache/*

PrusaSlicer/PrusaSlicer.ini

@@ -1,81 +0,0 @@
-# generated by PrusaSlicer 2.3.3+linux-x64 on 2022-02-10 at 18:37:53 UTC
-auto_toolbar_size = 100
-autocenter = 0
-background_processing = 0
-collapsed_sidebar = 0
-custom_toolbar_size = 100
-default_action_on_close_application = none
-default_action_on_select_preset = none
-drop_project_action = 1
-export_sources_full_pathnames = 0
-last_output_path = /home/kostiank/Downloads/3d/g
-last_output_path_removable = /media/knki1108/A87B-A154/gcode
-no_controller = 1
-no_defaults = 1
-preset_update = 1
-remember_output_path = 1
-remember_output_path_removable = 1
-reverse_mouse_wheel_zoom = 0
-seq_top_layer_only = 1
-show_drop_project_dialog = 1
-show_incompatible_presets = 0
-show_splash_screen = 1
-single_instance = 0
-tls_accepted_cert_store_location = /etc/ssl/certs/ca-certificates.crt
-tls_cert_store_accepted = yes
-translation_language = en_GB
-use_custom_toolbar_size = 0
-use_free_camera = 0
-use_inches = 0
-use_perspective_camera = 0
-version = 2.3.3+linux-x64
-version_check = 1
-version_online = 2.4.0
-version_online_seen = 2.4.0
-view_mode = expert
-window_mainframe = 2556; 30; 2556; 1385; 0
-
-[filaments]
-Generic ABS = 1
-Generic ABS @MINI = 1
-Generic PETG = 1
-Generic PETG @0.6 nozzle MINI = 1
-Generic PETG @MINI = 1
-Generic PLA = 1
-Prusament ASA = 1
-Prusament ASA @MINI = 1
-Prusament PETG = 1
-Prusament PETG @0.6 nozzle MINI = 1
-Prusament PETG @MINI = 1
-Prusament PLA = 1
-
-[presets]
-filament = PETG-DasFilament_Saphirblau
-physical_printer = 
-print = delta
-printer = sparky
-sla_material = Prusa Orange Tough @0.025
-sla_print = 0.025 UltraDetail
-
-[recent]
-config_directory = /home/knki1108/Downloads/3d/calibration/models
-skein_directory = /home/kostiank/git/zeus/3d-stuff/openscad/own/auto-luefterschlitz-blende
-
-[recent_projects]
-1 = /home/kostiank/Downloads/3d/calibration/models/3DBenchy.3mf
-2 = /home/knki1108/Downloads/3d/calibration/models/3DBenchy.3mf
-3 = /home/kostiank/Bilder/anderes/print issues top surface/kossel_2020_shells_plain.3mf
-
-[sla_materials]
-Prusa Orange Tough @0.025 = 1
-Prusa Orange Tough @0.035 = 1
-Prusa Orange Tough @0.05 = 1
-Prusa Orange Tough @0.1 = 1
-Prusament Resin Tough Prusa Orange @0.025 = 1
-Prusament Resin Tough Prusa Orange @0.05 = 1
-Prusament Resin Tough Prusa Orange @0.1 = 1
-
-[vendor:PrusaResearch]
-model:MINI = 0.25;0.4;0.6
-model:MK3S = 0.4
-

PrusaSlicer/cache/Anycubic.idx

@@ -1,14 +0,0 @@
-min_slic3r_version = 2.3.1-beta
-0.0.10 Various updates for Anycubic Mega. Added filament profiles.
-0.0.9 Updated bed textures
-min_slic3r_version = 2.3.0-beta2
-0.0.8 Updated start and end g-code for Anycubic Mega.
-0.0.7 Updated start g-code for Anycubic Mega.
-0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel.
-0.0.5 Updated end g-code.
-min_slic3r_version = 2.3.0-alpha2
-0.0.4 Fixed predator output filename format, infill overlap, start gcode adjustments.
-0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator
-0.0.2 Added Anycubic Predator
-min_slic3r_version = 2.3.0-alpha0
-0.0.1 Initial Version

PrusaSlicer/cache/BIBO.idx

@@ -1,16 +0,0 @@
-min_slic3r_version = 2.3.0-beta2
-0.0.3 Removed obsolete host keys.
-min_slic3r_version = 2.2.0-alpha3
-0.0.2 General print quality improvements
-0.0.1 Multiple Print models were unified into a single one.
-0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
-0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
-0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
-0.0.1-alpha12 github repo created for version history
-0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
-0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
-# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
-# so they will see the print bed.
-max_slic3r_version = 2.2.0-alpha2
-min_slic3r_version = 2.2.0-alpha0
-0.0.1-alpha Initial version

PrusaSlicer/cache/Creality.idx

@@ -1,32 +0,0 @@
-min_slic3r_version = 2.3.2-alpha0
-0.1.0 Added Ender-7, Sermoon D1, CR-10 SMART
-min_slic3r_version = 2.3.1-beta
-0.0.17 Updated start g-code. Added specific start g-code for straingauge printers. Improved output filename format. Added filament profile.
-0.0.16 Updated CR6-SE start g-code. Added and updated filament profiles.
-0.0.15 Added new printer models, filament profiles. Various improvements.
-min_slic3r_version = 2.3.0-rc2
-0.0.14 Optimized start g-code. Added filament profile. Various improvements.
-0.0.13 Optimized start and end g-code. General improvements.
-0.0.12 Added Ender-3V2 and filament profiles.
-min_slic3r_version = 2.3.0-beta2
-0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.
-0.0.10 Parameter consistency improvements. Enabled conservative elephant foot compensation.
-0.0.9 Fixed end g-code for Ender 5.
-0.0.8 Slight end g-code improvements and spool weights.
-min_slic3r_version = 2.3.0-alpha2
-0.0.7 Updated start g-code for Creality printers.
-0.0.6 Added filament profiles, adjusted temperatures, updated start g-code for some models.
-0.0.5 Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. Updated OPTIMAL print profile.
-0.0.4 Added initial CR-10 profile, end g-code improvements.
-min_slic3r_version = 2.3.0-alpha0
-0.0.3 Added Ender-2, Ender-3 BLTouch, updated Ender-3 bed texture.
-min_slic3r_version = 2.2.0-alpha3
-0.0.2 Updated for PrusaSlicer 2.2.0-rc
-0.0.2-beta Update for PrusaSlicer 2.2.0-beta
-0.0.2-alpha1 Extended list of default filaments to be installed
-0.0.2-alpha0 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
-# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
-# so they will see the print bed.
-max_slic3r_version = 2.2.0-alpha2
-min_slic3r_version = 2.2.0-alpha0
-0.0.1 Initial version

PrusaSlicer/cache/FLSun.idx

@@ -1,2 +0,0 @@
-min_slic3r_version = 2.3.0-rc2
-0.0.1 Initial Version

PrusaSlicer/cache/LulzBot.idx

@@ -1,4 +0,0 @@
-min_slic3r_version = 2.3.0-beta2
-0.0.2 Removed obsolete host keys
-min_slic3r_version = 2.2.0-alpha3
-0.0.1 Initial version

PrusaSlicer/cache/PrusaResearch.idx

@@ -1,201 +0,0 @@
-min_slic3r_version = 2.4.0-rc
-1.4.2 Added SLA material profiles.
-1.4.1 Updated firmware version.
-1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
-min_slic3r_version = 2.4.0-beta2
-1.4.0-beta3 Added material profiles for Prusament Resins.
-1.4.0-beta2 Added SLA material colors. Updated BASF filament profiles.
-min_slic3r_version = 2.4.0-beta0
-1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI. 
-1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
-min_slic3r_version = 2.4.0-alpha0
-1.4.0-alpha8 Added material profiles for Prusament Resin. Detect bridging perimeters enabled by default. 
-1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles. 
-1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
-1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
-1.4.0-alpha4 Decreased Area Fill (SL1S).
-1.4.0-alpha3 Updated SL1S tilt times.
-1.4.0-alpha2 Updated Prusa MINI machine limits.
-1.4.0-alpha1 Added new SL1S resin profiles.
-1.4.0-alpha0 Bumped up config version.
-1.3.0-alpha2 Added SL1S SPEED profiles.
-1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
-1.3.0-alpha0 Disabled thick bridges, updated support settings.
-min_slic3r_version = 2.3.2-alpha0
-1.3.6 Updated firmware version.
-1.3.5 Added material profiles for Prusament Resins.
-1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
-1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
-1.3.2 Added material profiles for Prusament Resin.
-1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
-1.3.0 Added SL1S SPEED profiles.
-min_slic3r_version = 2.3.0-rc1
-1.2.11 Updated firmware version.
-1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
-1.2.9 Added material profiles for Prusament Resin.
-1.2.8 Added multiple add:north and Extrudr filament profiles.
-1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
-1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
-1.2.5 Updated firmware version. Added filament profiles. Various improvements.
-1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
-1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
-1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. 
-1.2.1 Updated FW version for MK2.5 family printers.
-1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
-min_slic3r_version = 2.3.0-beta2
-1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
-min_slic3r_version = 2.3.0-beta0
-1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights. 
-min_slic3r_version = 2.3.0-alpha4
-1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
-1.2.0-alpha0 Added filament spool weights
-min_slic3r_version = 2.2.0-alpha3
-1.1.15 Updated firmware version.
-1.1.14 Updated firmware version.
-1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
-1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. 
-1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
-1.1.10 Updated firmware version.
-1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
-1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
-1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
-1.1.6 Updated firmware version for MK2.5/S and MK3/S.
-1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
-1.1.4 Added Prusament PC Blend filament profile.
-1.1.3 Added SLA material and filament profile
-1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
-1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
-1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
-1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
-1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
-# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
-# so they will see the print bed.
-max_slic3r_version = 2.2.0-alpha2
-min_slic3r_version = 2.2.0-alpha0
-1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
-1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
-min_slic3r_version = 2.1.1-beta0
-1.0.12 Updated firmware version.
-1.0.11 Updated firmware version.
-1.0.10 Updated firmware version for MK2.5/S and MK3/S.
-1.0.9 Updated firmware version for MK2.5/S and MK3/S.
-1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
-1.0.7 Updated layer height limits for MINI
-1.0.6 Added Prusa MINI profiles
-min_slic3r_version = 2.1.0-alpha0
-1.0.5 Added SLA materials
-1.0.4 Updated firmware version and 0.25mm nozzle profiles
-1.0.3 Added filament profiles
-1.0.2 Added SLA materials
-1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
-1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
-1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
-1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
-1.0.0-alpha2 Printer model and nozzle diameter check
-1.0.0-alpha1 Added Prusament ASA profile
-1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
-min_slic3r_version = 1.42.0-alpha6
-0.8.11 Updated firmware version.
-0.8.10 Updated firmware version.
-0.8.9 Updated firmware version for MK2.5/S and MK3/S.
-0.8.8 Updated firmware version for MK2.5/S and MK3/S.
-0.8.7 Updated firmware version
-0.8.6 Updated firmware version for MK2.5/S and MK3/S
-0.8.5 Updated SL1 printer and material settings
-0.8.4 Added Prusament ASA profile
-0.8.3 FW version and SL1 materials update
-0.8.2 FFF and SL1 settings update
-0.8.1 Output settings and SLA materials update
-0.8.0 Updated for the PrusaSlicer 2.0.0 final release
-0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
-0.8.0-rc1 Updated SLA profiles
-0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
-0.8.0-beta4 Updated SLA profiles
-0.8.0-beta3 Updated SLA profiles
-0.8.0-beta2 Updated SLA profiles
-0.8.0-beta1 Updated SLA profiles
-0.8.0-beta Updated SLA profiles
-0.8.0-alpha9 Updated SLA and FFF profiles
-0.8.0-alpha8 Updated SLA profiles
-0.8.0-alpha7 Updated SLA profiles
-0.8.0-alpha6 Updated SLA profiles
-min_slic3r_version = 1.42.0-alpha
-0.8.0-alpha Updated SLA profiles
-0.4.0-alpha4 Updated SLA profiles
-0.4.0-alpha3 Update of SLA profiles
-0.4.0-alpha2 First SLA profiles
-min_slic3r_version = 1.41.3-alpha
-0.4.12 Updated firmware version for MK2.5/S and MK3/S.
-0.4.11 Updated firmware version for MK2.5/S and MK3/S.
-0.4.10 Updated firmware version
-0.4.9 Updated firmware version for MK2.5/S and MK3/S
-0.4.8 MK2.5/3/S FW update
-0.4.7 MK2/S/MMU FW update
-0.4.6 Updated firmware versions for MK2.5/S and MK3/S
-0.4.5 Enabled remaining time support for MK2/S/MMU1
-0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.4.1 New MK2.5S and MK3S FW versions
-0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
-min_slic3r_version = 1.41.1
-0.3.11 Updated firmware version for MK2.5/S and MK3/S.
-0.3.10 Updated firmware version
-0.3.9 Updated firmware version for MK2.5/S and MK3/S
-0.3.8 MK2.5/3/S FW update
-0.3.7 MK2/S/MMU FW update
-0.3.6 Updated firmware versions for MK2.5 and MK3
-0.3.5 New MK2.5 and MK3 FW versions
-0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
-0.3.3 Prusament PETG released
-0.3.2 New MK2.5 and MK3 FW versions
-0.3.1 New MK2.5 and MK3 FW versions
-0.3.0 New MK2.5 and MK3 FW version
-min_slic3r_version = 1.41.0-alpha
-0.2.9 New MK2.5 and MK3 FW versions
-0.2.8 New MK2.5 and MK3 FW version
-min_slic3r_version = 1.41.1
-0.2.7 New MK2.5 and MK3 FW version
-0.2.6 Added MMU2 MK2.5 settings
-min_slic3r_version = 1.41.0-alpha
-0.2.5 Prusament is out - added prusament settings
-0.2.4 Added soluble support profiles for MMU2
-0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
-0.2.2 Edited MMU2 Single mode purge line
-0.2.1 Added PET and BVOH settings for MMU2
-0.2.0-beta5 Fixed MMU1 ramming parameters
-0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
-0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
-0.2.0-beta2 Edited first layer speed and wipe tower position
-0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
-0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
-0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
-0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
-0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
-0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
-0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
-0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
-0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
-0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
-min_slic3r_version = 1.40.0
-0.1.18 Updated firmware version
-0.1.17 Updated firmware version for MK2.5/S and MK3/S
-0.1.16 MK2.5/3/S FW update
-0.1.15 MK2/S/MMU FW update
-0.1.14 Updated firmware versions for MK2.5 and MK3
-0.1.13 New MK2.5 and MK3 FW versions
-0.1.12 New MK2.5 and MK3 FW versions
-0.1.11 fw version changed to 3.3.1
-0.1.10 MK3 jerk and acceleration update
-0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
-0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
-0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
-0.1.6 Split the MK2.5 profile from the MK2S
-min_slic3r_version = 1.40.0-beta
-0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
-0.1.4 edited fw version, added z-raise after print
-min_slic3r_version = 1.40.0-alpha
-0.1.3 Fixed an incorrect position of the max_print_height parameter
-0.1.2 Wipe tower changes
-0.1.1 Minor print speed adjustments
-0.1.0 Initial

PrusaSlicer/cache/TriLAB.idx

@@ -1,11 +0,0 @@
-min_slic3r_version = 2.3.2-alpha0
-0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements
-min_slic3r_version = 2.3.0-alpha3
-0.0.7 Added PLA, PETG profiles for 0.25 nozzle, fixed supports on 0.8 nozzle profile, fixed max volumetric speed, disabled elefant foot compensation
-0.0.6 Added material TPU 93A (SMARTFIL)
-0.0.5 Removed obsolete host keys.
-0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials
-0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
-min_slic3r_version = 2.3.0-alpha0
-0.0.2 Added 0.15mm print profile
-0.0.1 Initial TriLAB bundle

PrusaSlicer/filament/PETG-DasFilament_Saphirblau.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-27 at 05:24:47 UTC
-bed_temperature = 75
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.99
-fan_always_on = 1
-fan_below_layer_time = 30
-filament_colour = #1730DD
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 25
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = PETG-DasFilament_Saphirblau
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 70
-first_layer_temperature = 235
-full_fan_speed_layer = 3
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "; Filament gcode\n"
-temperature = 240

PrusaSlicer/filament/PETG-Tinmorry White.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
-bed_temperature = 70
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.97
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 72
-first_layer_temperature = 235
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 230

PrusaSlicer/filament/PLA_Geetech_Black.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 14:26:28 UTC
-bed_temperature = 65
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #0EFB7C
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 65
-first_layer_temperature = 200
-full_fan_speed_layer = 0
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 195

PrusaSlicer/filament/PLA_Noulei-Silk Filaments.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-05-15 at 12:12:32 UTC
-bed_temperature = 55
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 55
-first_layer_temperature = 200
-full_fan_speed_layer = 0
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200

PrusaSlicer/filament/PLA_Sunlu_Grasgruen.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.4.1+linux-x64-GTK2 on 2022-05-17 at 21:53:02 UTC
-bed_temperature = 55
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.98
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #10AC48
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 55
-first_layer_temperature = 210
-full_fan_speed_layer = 0
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 205

PrusaSlicer/filament/sparky.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-20 at 21:08:45 UTC
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 0
-filament_density = 0
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 65
-first_layer_temperature = 200
-full_fan_speed_layer = 0
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200

PrusaSlicer/print/delta.ini

@@ -1,122 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 1
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.92
-bridge_speed = 50
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.4
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.4
-fill_angle = 45
-fill_density = 30%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.45
-first_layer_height = 0.25
-first_layer_speed = 30
-gap_fill_speed = 30
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 13%
-ironing_spacing = 0.1
-ironing_speed = 20
-ironing_type = top
-layer_height = 0.25
-max_print_speed = 100
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.4
-perimeter_speed = 60
-perimeters = 4
-post_process = 
-print_settings_id = delta
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 4
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 50%
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.25
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear-grid
-support_material_spacing = 2
-support_material_speed = 80
-support_material_synchronize_layers = 0
-support_material_threshold = 30
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
-top_solid_layers = 4
-top_solid_min_thickness = 1
-travel_speed = 200
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/print/delta_speed-draft_100mm.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 100
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 100
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 40
-gap_fill_speed = 100
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 100
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 100
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 100
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 100
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/print/sparky.ini

@@ -1,122 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 10:26:16 UTC
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.2
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.3
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 80
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.3
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 30
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 20
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 130
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/printer/Elegoo Mars 2 Pro.ini

@@ -1,38 +0,0 @@
-# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-12 at 23:01:23 UTC
-absolute_correction = 0
-area_fill = 50
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02
-default_sla_material_profile = Prusa Orange Tough @0.05
-default_sla_print_profile = 0.05 Normal
-display_height = 68.04
-display_mirror_x = 1
-display_mirror_y = 0
-display_orientation = portrait
-display_pixels_x = 2560
-display_pixels_y = 1440
-display_width = 120.96
-elefant_foot_compensation = 0.2
-elefant_foot_min_width = 0.2
-fast_tilt_time = 5
-gamma_correction = 1
-host_type = octoprint
-inherits = Original Prusa SL1
-max_exposure_time = 120
-max_initial_exposure_time = 300
-max_print_height = 150
-min_exposure_time = 1
-min_initial_exposure_time = 1
-print_host = 
-printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
-printer_settings_id = 
-printer_technology = SLA
-printer_variant = default
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-relative_correction = 1,1
-slow_tilt_time = 8
-thumbnails = 400x400,800x480

PrusaSlicer/printer/delta.ini

@@ -1,77 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-31 at 16:56:56 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
-before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
-between_objects_gcode = 
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = ""
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S60; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
-extra_loading_move = -2
-extruder_colour = #019B9B
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,9000
-machine_max_acceleration_y = 9000,9000
-machine_max_acceleration_z = 9000,9000
-machine_max_feedrate_e = 250,250
-machine_max_feedrate_x = 1500,1500
-machine_max_feedrate_y = 1500,1500
-machine_max_feedrate_z = 1500,1500
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 9,9
-machine_max_jerk_y = 9,9
-machine_max_jerk_z = 9,9
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 196
-min_layer_height = 0.1
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 10%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0.15
-retract_lift_above = 0
-retract_lift_below = 150
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
-template_custom_gcode = 
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/printer/sparky.ini

@@ -1,77 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-22 at 23:05:45 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,177x0,177x175,0x175
-before_layer_gcode = 
-between_objects_gcode = 
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = 
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nG28 X0  ; home X axis\nM84     ; disable motors\nM106 S255 ; Cooldown Hotend\nG4 S30 ; wait 30secs\nM107 ; turn off Fan \n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 500,200
-machine_max_feedrate_y = 500,200
-machine_max_feedrate_z = 5,5
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 10,10
-machine_max_jerk_y = 10,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 145
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0.1
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nG1 X0 Y0 Z3 F2500 ; lift nozzle\nG92 E0 ;Reset Extruder\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature] ; wait for nozzle\nG1 X1 Y0 Z[first_layer_height] F5000.0\nG1 X150 Y0 F1500.0 E12 ; Draw line\nG1 X150 Y5 F5000 ; wipe\nG1 Z1 F2500; lift\nG92 E0; reset Extruder
-template_custom_gcode = 
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20200906T205915Z/filament/delta.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:16 UTC
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 0
-filament_density = 0
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200

PrusaSlicer/snapshots/20200906T205915Z/print/delta.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:42 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.2
-ensure_vertical_shell_thickness = 0
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = gyroid
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.35
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 80
-inherits = 
-interface_shells = 0
-layer_height = 0.3
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 15
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 15
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 130
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20200906T205915Z/printer/delta.ini

@@ -1,75 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-08-16 at 00:56:16 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
-before_layer_gcode = 
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = ""
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 500,200
-machine_max_feedrate_y = 500,200
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 10,10
-machine_max_jerk_y = 10,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 200
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-serial_port = 
-serial_speed = 250000
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20200906T205915Z/snapshot.ini

@@ -1,19 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-09-06 at 20:59:15 UTC
-
-[snapshot]
-id = 20200906T205915Z
-time_captured = 20200906T205915Z
-slic3r_version_captured = 2.2.0+linux-x64
-comment = 
-reason = upgrade
-
-[presets]
-print = delta
-filament = delta
-printer = delta
-
-[Vendor:PrusaResearch]
-version = 1.1.2
-min_slic3r_version = 2.2.0-alpha3
-max_slic3r_version = 2147483647.2147483647.2147483647
-model_MINI = 0.25;0.4;0.6

PrusaSlicer/snapshots/20201012T191258Z/filament/PLA_Noulei-Silk BlueSilver_Silk Blue.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-12 at 05:06:14 UTC
-bed_temperature = 55
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #6432E8
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 0
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 55
-first_layer_temperature = 192
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 190

PrusaSlicer/snapshots/20201012T191258Z/filament/delta.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-09-24 at 14:30:47 UTC
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 90
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 0
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 62
-first_layer_temperature = 195
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 195

PrusaSlicer/snapshots/20201012T191258Z/print/delta.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 01:57:43 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 60
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 20
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 80
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 60
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 50%
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 20
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20201012T191258Z/print/delta_speed-draft_100mm.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 100
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 100
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 40
-gap_fill_speed = 100
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 100
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 100
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 100
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 100
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20201012T191258Z/printer/delta.ini

@@ -1,75 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-11 at 19:45:55 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
-before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = ""
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nG28 ; home \nM84     ; disable motors\n\n
-extra_loading_move = -2
-extruder_colour = #019B9B
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,9000
-machine_max_acceleration_y = 9000,9000
-machine_max_acceleration_z = 9000,9000
-machine_max_feedrate_e = 250,250
-machine_max_feedrate_x = 1500,1500
-machine_max_feedrate_y = 1500,1500
-machine_max_feedrate_z = 1500,1500
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 9,9
-machine_max_jerk_y = 9,9
-machine_max_jerk_z = 9,9
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 196
-min_layer_height = 0.1
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 10%
-retract_layer_change = 0
-retract_length = 1.85
-retract_length_toolchange = 10
-retract_lift = 0.2
-retract_lift_above = 0.4
-retract_lift_below = 150
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-serial_port = 
-serial_speed = 250000
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X-65 Y42 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X-67 Y40 Z0.3 F3000 ; move down\nG1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20201012T191258Z/snapshot.ini

@@ -1,19 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-12 at 19:12:58 UTC
-
-[snapshot]
-id = 20201012T191258Z
-time_captured = 20201012T191258Z
-slic3r_version_captured = 2.2.0+linux-x64
-comment = 
-reason = upgrade
-
-[presets]
-print = delta
-filament = PLA_Noulei-Silk BlueSilver_Silk Blue
-printer = delta
-
-[Vendor:PrusaResearch]
-version = 1.1.8
-min_slic3r_version = 2.2.0-alpha3
-max_slic3r_version = 2147483647.2147483647.2147483647
-model_MINI = 0.25;0.4;0.6

PrusaSlicer/snapshots/20201030T213905Z/filament/PLA_Noulei-Silk Filaments.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
-bed_temperature = 55
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 55
-first_layer_temperature = 192
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 190

PrusaSlicer/snapshots/20201030T213905Z/print/delta.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 13:56:15 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 60
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 20%
-fill_pattern = gyroid
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 20
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 80
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 60
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 50%
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 20
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20201030T213905Z/print/delta_speed-draft_100mm.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 100
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 100
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 40
-gap_fill_speed = 100
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 100
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 100
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 100
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 100
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20201030T213905Z/printer/delta.ini

@@ -1,75 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-11 at 19:45:55 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
-before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = ""
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nG28 ; home \nM84     ; disable motors\n\n
-extra_loading_move = -2
-extruder_colour = #019B9B
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,9000
-machine_max_acceleration_y = 9000,9000
-machine_max_acceleration_z = 9000,9000
-machine_max_feedrate_e = 250,250
-machine_max_feedrate_x = 1500,1500
-machine_max_feedrate_y = 1500,1500
-machine_max_feedrate_z = 1500,1500
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 9,9
-machine_max_jerk_y = 9,9
-machine_max_jerk_z = 9,9
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 196
-min_layer_height = 0.1
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 10%
-retract_layer_change = 0
-retract_length = 1.85
-retract_length_toolchange = 10
-retract_lift = 0.2
-retract_lift_above = 0.4
-retract_lift_below = 150
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-serial_port = 
-serial_speed = 250000
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X-65 Y42 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X-67 Y40 Z0.3 F3000 ; move down\nG1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20201030T213905Z/snapshot.ini

@@ -1,19 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-30 at 21:39:05 UTC
-
-[snapshot]
-id = 20201030T213905Z
-time_captured = 20201030T213905Z
-slic3r_version_captured = 2.2.0+linux-x64
-comment = 
-reason = upgrade
-
-[presets]
-print = delta
-filament = PLA_Noulei-Silk Filaments
-printer = delta
-
-[Vendor:PrusaResearch]
-version = 1.1.9
-min_slic3r_version = 2.2.0-alpha3
-max_slic3r_version = 2147483647.2147483647.2147483647
-model_MINI = 0.25;0.4;0.6

PrusaSlicer/snapshots/20201223T212623Z/filament/PETG-Tinmorry White.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
-bed_temperature = 70
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.97
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 72
-first_layer_temperature = 235
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 230

PrusaSlicer/snapshots/20201223T212623Z/filament/PLA_Noulei-Silk Filaments.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
-bed_temperature = 55
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 55
-first_layer_temperature = 192
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 190

PrusaSlicer/snapshots/20201223T212623Z/print/delta.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-17 at 13:29:52 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 60
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 50%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 15
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 80
-inherits = 
-interface_shells = 0
-layer_height = 0.3
-max_print_speed = 100
-max_volumetric_speed = 0
-min_skirt_length = 15
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 60
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 4
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 50%
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.23
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear-grid
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 25
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 20
-top_solid_layers = 4
-top_solid_min_thickness = 0
-travel_speed = 222
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20201223T212623Z/print/delta_speed-draft_100mm.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 100
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 100
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 40
-gap_fill_speed = 100
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 100
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 100
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 100
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 100
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20201223T212623Z/printer/delta.ini

@@ -1,75 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-07 at 20:30:02 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
-before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = ""
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
-extra_loading_move = -2
-extruder_colour = #019B9B
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,9000
-machine_max_acceleration_y = 9000,9000
-machine_max_acceleration_z = 9000,9000
-machine_max_feedrate_e = 250,250
-machine_max_feedrate_x = 1500,1500
-machine_max_feedrate_y = 1500,1500
-machine_max_feedrate_z = 1500,1500
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 9,9
-machine_max_jerk_y = 9,9
-machine_max_jerk_z = 9,9
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 196
-min_layer_height = 0.1
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 10%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0.2
-retract_lift_above = 0.3
-retract_lift_below = 150
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-serial_port = 
-serial_speed = 250000
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20201223T212623Z/snapshot.ini

@@ -1,19 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-12-23 at 21:26:23 UTC
-
-[snapshot]
-id = 20201223T212623Z
-time_captured = 20201223T212623Z
-slic3r_version_captured = 2.2.0+linux-x64
-comment = 
-reason = upgrade
-
-[presets]
-print = delta
-filament = PLA_Noulei-Silk Filaments
-printer = delta
-
-[Vendor:PrusaResearch]
-version = 1.1.10
-min_slic3r_version = 2.2.0-alpha3
-max_slic3r_version = 2147483647.2147483647.2147483647
-model_MINI = 0.25;0.4;0.6

PrusaSlicer/snapshots/20210221T114613Z/filament/PETG-DasFilament_Saphirblau.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-18 at 11:28:23 UTC
-bed_temperature = 70
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.97
-fan_always_on = 1
-fan_below_layer_time = 30
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = PETG-DasFilament_Saphirblau
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 72
-first_layer_temperature = 225
-full_fan_speed_layer = 0
-inherits = 
-max_fan_speed = 85
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 220

PrusaSlicer/snapshots/20210221T114613Z/filament/PETG-Tinmorry White.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
-bed_temperature = 70
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.97
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 72
-first_layer_temperature = 235
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 230

PrusaSlicer/snapshots/20210221T114613Z/filament/PLA_Noulei-Silk Filaments.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
-bed_temperature = 55
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 55
-first_layer_temperature = 192
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 190

PrusaSlicer/snapshots/20210221T114613Z/print/delta.ini

@@ -1,122 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-18 at 22:33:05 UTC
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 60
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.2
-first_layer_speed = 15
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 80
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 12%
-ironing_spacing = 0.1
-ironing_speed = 20
-ironing_type = top
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 60
-perimeters = 4
-post_process = 
-print_settings_id = delta
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 50%
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.23
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear-grid
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 25
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 20
-top_solid_layers = 4
-top_solid_min_thickness = 0
-travel_speed = 222
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20210221T114613Z/print/delta_speed-draft_100mm.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 100
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 100
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 40
-gap_fill_speed = 100
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 100
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 100
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 100
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 100
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20210221T114613Z/printer/delta.ini

@@ -1,75 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-07 at 20:30:02 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
-before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = ""
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S120; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
-extra_loading_move = -2
-extruder_colour = #019B9B
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,9000
-machine_max_acceleration_y = 9000,9000
-machine_max_acceleration_z = 9000,9000
-machine_max_feedrate_e = 250,250
-machine_max_feedrate_x = 1500,1500
-machine_max_feedrate_y = 1500,1500
-machine_max_feedrate_z = 1500,1500
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 9,9
-machine_max_jerk_y = 9,9
-machine_max_jerk_z = 9,9
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 196
-min_layer_height = 0.1
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 10%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0.2
-retract_lift_above = 0.3
-retract_lift_below = 150
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-serial_port = 
-serial_speed = 250000
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 100}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20210221T114613Z/snapshot.ini

@@ -1,22 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-02-21 at 11:46:13 UTC
-
-[snapshot]
-id = 20210221T114613Z
-time_captured = 20210221T114613Z
-slic3r_version_captured = 2.3.0+linux-x64
-comment = 
-reason = upgrade
-
-[presets]
-print = delta
-sla_print = 
-filament = PETG-DasFilament_Saphirblau
-sla_material = 
-printer = delta
-physical_printer = 
-
-[Vendor:PrusaResearch]
-version = 1.1.11
-min_slic3r_version = 2.2.0-alpha3
-max_slic3r_version = 2147483647.2147483647.2147483647
-model_MINI = 0.25;0.4;0.6

PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-DasFilament_Saphirblau.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-27 at 05:24:47 UTC
-bed_temperature = 75
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.99
-fan_always_on = 1
-fan_below_layer_time = 30
-filament_colour = #1730DD
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 25
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nDasFilament PETG:\nusually good at 230/70°C, but spahipblau prints better at 220.\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = PETG-DasFilament_Saphirblau
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 70
-first_layer_temperature = 235
-full_fan_speed_layer = 3
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "; Filament gcode\n"
-temperature = 240

PrusaSlicer/snapshots/20211112T225913Z/filament/PETG-Tinmorry White.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-11-09 at 06:05:44 UTC
-bed_temperature = 70
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.97
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 72
-first_layer_temperature = 235
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 230

PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Geetech_Black.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 14:26:28 UTC
-bed_temperature = 65
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #0EFB7C
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 65
-first_layer_temperature = 200
-full_fan_speed_layer = 0
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 195

PrusaSlicer/snapshots/20211112T225913Z/filament/PLA_Noulei-Silk Filaments.ini

@@ -1,55 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-15 at 21:23:23 UTC
-bed_temperature = 55
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 0.95
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.18
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "Noulei Silk PLA Filaments.\nPrint well on low temps <200°C, but black has far better strength and layer adhesion than the bright colours.\nSuccessfully tested filaments already testet on delta /w e3dv6/0.4:\n\n#24 Silk Black\n#11Silk Blue\n#14Silk Silver Blue\n\nnext ones to test out:\n#26 antique gold\n#9 red\n#4 white\npetg?"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 55
-first_layer_temperature = 192
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 8
-start_filament_gcode = "; Filament gcode\n"
-temperature = 190

PrusaSlicer/snapshots/20211112T225913Z/filament/sparky.ini

@@ -1,57 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-20 at 21:08:45 UTC
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 0
-filament_density = 0
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = (Unknown)
-filament_wipe = nil
-first_layer_bed_temperature = 65
-first_layer_temperature = 200
-full_fan_speed_layer = 0
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200

PrusaSlicer/snapshots/20211112T225913Z/print/delta.ini

@@ -1,122 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-14 at 08:38:14 UTC
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 1
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.92
-bridge_speed = 50
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.4
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.4
-fill_angle = 45
-fill_density = 30%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.45
-first_layer_height = 0.25
-first_layer_speed = 30
-gap_fill_speed = 30
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 13%
-ironing_spacing = 0.1
-ironing_speed = 20
-ironing_type = top
-layer_height = 0.25
-max_print_speed = 100
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.4
-perimeter_speed = 60
-perimeters = 4
-post_process = 
-print_settings_id = delta
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 4
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 50%
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.25
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear-grid
-support_material_spacing = 2
-support_material_speed = 80
-support_material_synchronize_layers = 0
-support_material_threshold = 30
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
-top_solid_layers = 4
-top_solid_min_thickness = 1
-travel_speed = 200
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20211112T225913Z/print/delta_speed-draft_100mm.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-09 at 15:48:42 UTC
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.91
-bridge_speed = 100
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.1
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.42
-external_perimeter_speed = 100
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.44
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.44
-first_layer_height = 0.3
-first_layer_speed = 40
-gap_fill_speed = 100
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.44
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 100
-inherits = 
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.44
-perimeter_speed = 100
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 100
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.44
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 100
-support_material_synchronize_layers = 0
-support_material_threshold = 20
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.44
-top_solid_infill_speed = 100
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20211112T225913Z/print/sparky.ini

@@ -1,122 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-23 at 10:26:16 UTC
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0.2
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = stars
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.3
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 80
-inherits = 
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.3
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 10
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-small_perimeter_speed = 30
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 8
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 20
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 130
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0

PrusaSlicer/snapshots/20211112T225913Z/printer/delta.ini

@@ -1,77 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-05-31 at 16:56:56 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
-before_layer_gcode = ; Layer change to Layer [layer_num]\n; Z=[layer_z]\n
-between_objects_gcode = 
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = ""
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend temperature\nM190 S0; turn off bed temperature\nM106; hotend fan full blast\nG28; home \nM84; disable motors\nG4 S10; wait 10 seconds for hotend cooldown\n; play some tunes:\n;Mission Impossible\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2349 P75\nM300 S2349 P75\nM300 S2489 P75\nM300 S2637 P75\nM300 S2793 P75\nM300 S2959 P75\nM300 S3135 P75\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S1864 P150\nM300 S0 P150\nM300 S2093 P150\nM300 S0 P150\nM300 S3135 P150\nM300 S0 P300\nM300 S3135 P150\nM300 S0 P300\nM300 S2793 P150\nM300 S0 P150\nM300 S2959 P150\nM300 S0 P150\nM300 S1864 P150\nM300 S3135 P150\nM300 S2349 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2217 P1200\nM300 S0 P75\nM300 S1864 P150\nM300 S3135 P150\nM300 S2093 P1200\nM300 S0 P150\nM300 S932 P150\nM300 S2093 P150\n; end of tune\nG4 S60; wait another 2 Minutes for hotend cooldown\nM107; hotend fan off
-extra_loading_move = -2
-extruder_colour = #019B9B
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,9000
-machine_max_acceleration_y = 9000,9000
-machine_max_acceleration_z = 9000,9000
-machine_max_feedrate_e = 250,250
-machine_max_feedrate_x = 1500,1500
-machine_max_feedrate_y = 1500,1500
-machine_max_feedrate_z = 1500,1500
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 9,9
-machine_max_jerk_y = 9,9
-machine_max_jerk_z = 9,9
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 196
-min_layer_height = 0.1
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 10%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0.15
-retract_lift_above = 0
-retract_lift_below = 150
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nM140 S[first_layer_bed_temperature] ; set bed final temp\nG1 X0 Y0 Z100 F4000 ; safe position\nG1 X0 Y-50 Z5 F4000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nG1 X0 Y-45 Z0.3 F3000 ; move down\n;G1 Z0.5; lift\nG92 E0\n{if perimeter_speed >= 75}M900 K0; Disable LINEAR_ADVANCE for speed's sake!\n;{elsif perimeter_speed >= 65}M900 K0.2; reduced LINEAR_ADVANCE because of higher speeds\n{else}M900 K0.38; LINEAR_ADVANCE high quality preset\n{endif}
-template_custom_gcode = 
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20211112T225913Z/printer/sparky.ini

@@ -1,77 +0,0 @@
-# generated by PrusaSlicer 2.3.0+linux-x64 on 2021-06-22 at 23:05:45 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,177x0,177x175,0x175
-before_layer_gcode = 
-between_objects_gcode = 
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = 
-default_print_profile = 
-deretract_speed = 0
-end_gcode = M104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nG28 X0  ; home X axis\nM84     ; disable motors\nM106 S255 ; Cooldown Hotend\nG4 S30 ; wait 30secs\nM107 ; turn off Fan \n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 500,200
-machine_max_feedrate_y = 500,200
-machine_max_feedrate_z = 5,5
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 10,10
-machine_max_jerk_y = 10,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 145
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0.1
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = G28 ; home all axes\nG1 X0 Y0 Z3 F2500 ; lift nozzle\nG92 E0 ;Reset Extruder\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature] ; wait for nozzle\nG1 X1 Y0 Z[first_layer_height] F5000.0\nG1 X150 Y0 F1500.0 E12 ; Draw line\nG1 X150 Y5 F5000 ; wipe\nG1 Z1 F2500; lift\nG92 E0; reset Extruder
-template_custom_gcode = 
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0
-z_offset = 0

PrusaSlicer/snapshots/20211112T225913Z/snapshot.ini

@@ -1,23 +0,0 @@
-# generated by PrusaSlicer 2.3.3+linux-x64 on 2021-11-12 at 22:59:14 UTC
-
-[snapshot]
-id = 20211112T225913Z
-time_captured = 20211112T225913Z
-slic3r_version_captured = 2.3.3+linux-x64
-comment = 
-reason = upgrade
-
-[presets]
-print = delta
-sla_print = 
-filament = PETG-DasFilament_Saphirblau
-sla_material = 
-printer = delta
-physical_printer = 
-
-[Vendor:PrusaResearch]
-version = 1.2.4
-min_slic3r_version = 2.3.0-rc1
-max_slic3r_version = 2147483647.2147483647.2147483647
-model_MINI = 0.25;0.4;0.6
-model_MK3S = 0.4

PrusaSlicer/vendor/PrusaResearch.idx

@@ -1,201 +0,0 @@
-min_slic3r_version = 2.4.0-rc
-1.4.2 Added SLA material profiles.
-1.4.1 Updated firmware version.
-1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
-min_slic3r_version = 2.4.0-beta2
-1.4.0-beta3 Added material profiles for Prusament Resins.
-1.4.0-beta2 Added SLA material colors. Updated BASF filament profiles.
-min_slic3r_version = 2.4.0-beta0
-1.4.0-beta1 Updated pad wall slope angle for SLA printers. Updated Filatech Filacarbon profile for Prusa MINI. 
-1.4.0-beta0 Added multiple Filatech and BASF filament profiles. Added material profiles for SL1S.
-min_slic3r_version = 2.4.0-alpha0
-1.4.0-alpha8 Added material profiles for Prusament Resin. Detect bridging perimeters enabled by default. 
-1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles. 
-1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
-1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
-1.4.0-alpha4 Decreased Area Fill (SL1S).
-1.4.0-alpha3 Updated SL1S tilt times.
-1.4.0-alpha2 Updated Prusa MINI machine limits.
-1.4.0-alpha1 Added new SL1S resin profiles.
-1.4.0-alpha0 Bumped up config version.
-1.3.0-alpha2 Added SL1S SPEED profiles.
-1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
-1.3.0-alpha0 Disabled thick bridges, updated support settings.
-min_slic3r_version = 2.3.2-alpha0
-1.3.6 Updated firmware version.
-1.3.5 Added material profiles for Prusament Resins.
-1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
-1.3.3 Added multiple profiles for Filatech filaments. Added material profiles for SL1S SPEED. Updated SLA print settings.
-1.3.2 Added material profiles for Prusament Resin.
-1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
-1.3.0 Added SL1S SPEED profiles.
-min_slic3r_version = 2.3.0-rc1
-1.2.11 Updated firmware version.
-1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
-1.2.9 Added material profiles for Prusament Resin.
-1.2.8 Added multiple add:north and Extrudr filament profiles.
-1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
-1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
-1.2.5 Updated firmware version. Added filament profiles. Various improvements.
-1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
-1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
-1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. 
-1.2.1 Updated FW version for MK2.5 family printers.
-1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
-min_slic3r_version = 2.3.0-beta2
-1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
-min_slic3r_version = 2.3.0-beta0
-1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights. 
-min_slic3r_version = 2.3.0-alpha4
-1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
-1.2.0-alpha0 Added filament spool weights
-min_slic3r_version = 2.2.0-alpha3
-1.1.15 Updated firmware version.
-1.1.14 Updated firmware version.
-1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
-1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. 
-1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
-1.1.10 Updated firmware version.
-1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
-1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
-1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
-1.1.6 Updated firmware version for MK2.5/S and MK3/S.
-1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
-1.1.4 Added Prusament PC Blend filament profile.
-1.1.3 Added SLA material and filament profile
-1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
-1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
-1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
-1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
-1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
-# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
-# so they will see the print bed.
-max_slic3r_version = 2.2.0-alpha2
-min_slic3r_version = 2.2.0-alpha0
-1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
-1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
-min_slic3r_version = 2.1.1-beta0
-1.0.12 Updated firmware version.
-1.0.11 Updated firmware version.
-1.0.10 Updated firmware version for MK2.5/S and MK3/S.
-1.0.9 Updated firmware version for MK2.5/S and MK3/S.
-1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
-1.0.7 Updated layer height limits for MINI
-1.0.6 Added Prusa MINI profiles
-min_slic3r_version = 2.1.0-alpha0
-1.0.5 Added SLA materials
-1.0.4 Updated firmware version and 0.25mm nozzle profiles
-1.0.3 Added filament profiles
-1.0.2 Added SLA materials
-1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
-1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
-1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
-1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
-1.0.0-alpha2 Printer model and nozzle diameter check
-1.0.0-alpha1 Added Prusament ASA profile
-1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
-min_slic3r_version = 1.42.0-alpha6
-0.8.11 Updated firmware version.
-0.8.10 Updated firmware version.
-0.8.9 Updated firmware version for MK2.5/S and MK3/S.
-0.8.8 Updated firmware version for MK2.5/S and MK3/S.
-0.8.7 Updated firmware version
-0.8.6 Updated firmware version for MK2.5/S and MK3/S
-0.8.5 Updated SL1 printer and material settings
-0.8.4 Added Prusament ASA profile
-0.8.3 FW version and SL1 materials update
-0.8.2 FFF and SL1 settings update
-0.8.1 Output settings and SLA materials update
-0.8.0 Updated for the PrusaSlicer 2.0.0 final release
-0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
-0.8.0-rc1 Updated SLA profiles
-0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
-0.8.0-beta4 Updated SLA profiles
-0.8.0-beta3 Updated SLA profiles
-0.8.0-beta2 Updated SLA profiles
-0.8.0-beta1 Updated SLA profiles
-0.8.0-beta Updated SLA profiles
-0.8.0-alpha9 Updated SLA and FFF profiles
-0.8.0-alpha8 Updated SLA profiles
-0.8.0-alpha7 Updated SLA profiles
-0.8.0-alpha6 Updated SLA profiles
-min_slic3r_version = 1.42.0-alpha
-0.8.0-alpha Updated SLA profiles
-0.4.0-alpha4 Updated SLA profiles
-0.4.0-alpha3 Update of SLA profiles
-0.4.0-alpha2 First SLA profiles
-min_slic3r_version = 1.41.3-alpha
-0.4.12 Updated firmware version for MK2.5/S and MK3/S.
-0.4.11 Updated firmware version for MK2.5/S and MK3/S.
-0.4.10 Updated firmware version
-0.4.9 Updated firmware version for MK2.5/S and MK3/S
-0.4.8 MK2.5/3/S FW update
-0.4.7 MK2/S/MMU FW update
-0.4.6 Updated firmware versions for MK2.5/S and MK3/S
-0.4.5 Enabled remaining time support for MK2/S/MMU1
-0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
-0.4.1 New MK2.5S and MK3S FW versions
-0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
-min_slic3r_version = 1.41.1
-0.3.11 Updated firmware version for MK2.5/S and MK3/S.
-0.3.10 Updated firmware version
-0.3.9 Updated firmware version for MK2.5/S and MK3/S
-0.3.8 MK2.5/3/S FW update
-0.3.7 MK2/S/MMU FW update
-0.3.6 Updated firmware versions for MK2.5 and MK3
-0.3.5 New MK2.5 and MK3 FW versions
-0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
-0.3.3 Prusament PETG released
-0.3.2 New MK2.5 and MK3 FW versions
-0.3.1 New MK2.5 and MK3 FW versions
-0.3.0 New MK2.5 and MK3 FW version
-min_slic3r_version = 1.41.0-alpha
-0.2.9 New MK2.5 and MK3 FW versions
-0.2.8 New MK2.5 and MK3 FW version
-min_slic3r_version = 1.41.1
-0.2.7 New MK2.5 and MK3 FW version
-0.2.6 Added MMU2 MK2.5 settings
-min_slic3r_version = 1.41.0-alpha
-0.2.5 Prusament is out - added prusament settings
-0.2.4 Added soluble support profiles for MMU2
-0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
-0.2.2 Edited MMU2 Single mode purge line
-0.2.1 Added PET and BVOH settings for MMU2
-0.2.0-beta5 Fixed MMU1 ramming parameters
-0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
-0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
-0.2.0-beta2 Edited first layer speed and wipe tower position
-0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
-0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
-0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
-0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
-0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
-0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
-0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
-0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
-0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
-0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
-min_slic3r_version = 1.40.0
-0.1.18 Updated firmware version
-0.1.17 Updated firmware version for MK2.5/S and MK3/S
-0.1.16 MK2.5/3/S FW update
-0.1.15 MK2/S/MMU FW update
-0.1.14 Updated firmware versions for MK2.5 and MK3
-0.1.13 New MK2.5 and MK3 FW versions
-0.1.12 New MK2.5 and MK3 FW versions
-0.1.11 fw version changed to 3.3.1
-0.1.10 MK3 jerk and acceleration update
-0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
-0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
-0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
-0.1.6 Split the MK2.5 profile from the MK2S
-min_slic3r_version = 1.40.0-beta
-0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
-0.1.4 edited fw version, added z-raise after print
-min_slic3r_version = 1.40.0-alpha
-0.1.3 Fixed an incorrect position of the max_print_height parameter
-0.1.2 Wipe tower changes
-0.1.1 Minor print speed adjustments
-0.1.0 Initial

deltazeus/todo.md

@@ -1,4 +0,0 @@
-- soft pwm for fans to respect sunon 40mm fans
-  - https://github.com/MarlinFirmware/Marlin/issues/12360
-  - https://github.com/MarlinFirmware/Marlin/issues/19924
-  - https://www.3d-druck-community.de/showthread.php?tid=23057

filaments.md

@@ -1,24 +0,0 @@
-# Filaments
-
-| Make	| Material	| Color/Code		| Dia		| Price/Volume 	| Notes				| 3dprintingdb 	| 
-|---		|---		|---				|---		|--:			|---					|---			|
-| Noulei	| PLA  	| Silk Black / #24  	| 1.75mm	| 26,99€/1kg	| 190-200°C, better layer bond as other silk filaments from same vendor, multiplier: 0.95 | N/A |
-| Noulei	| PLA  	| Silk Blue / #11		| 1.75mm	| 26,99€/1kg	| 190-200°C, Shiny tortoise/light blue	| N/A |
-| Noulei	| PLA  	| Silk Silver Blue / #14| 1.75mm	| 26,99€/1kg	| 190-200°C, Shiny purple 		| N/A |
-| GEEETECH	| PLA  	| Black / 700-001-0426 / Y2005 | 1.75mm | 24,99€/1kg	| 					| N/A |
-| GEEETECH	| PLA		| Silk Silver		| 1.75mm	| 26,99€/1kg	| 					| N/A |
-| TINMORRY	| PETG	| White			| 1,75mm	| 18,88€/1kg	| 235°C/75°C, very strong layer bond | [link](https://3dprintingdb.com/filament/928/tinmorry-petg-white) |  
-| Sunlu	| PLA		| Grasgruen			| 1,75mm	| 18,49€/1kg	| 210°C/205°C, slightly more dense than noulei (multiplier ~0.98)
-| DasFilament | PETG	| Silber			| 1,75mm	| 22,37€/850g(refill) | 235°C/75°C, with sparkles | N/A |
-| DasFilament | PETG	| Saphirblau		| 1,75mm	| 21,41€/800g	| 225°C/75°C, needs less temp than others! | [link](https://3dprintingdb.com/filament/662/das-filament-petg-saphirblau) |
-| DasFilament | PETG	| Rubinrot			| 1,75mm	| 18,88€/850g(refill) | TBD | [link](https://3dprintingdb.com/filament/663/das-filament-petg-rubinrot) |
-
-## Next Filaments to test out: 
-* Prusa PLA 
-	* Galaxy Black
-* DasFilament PLA 
-	* Blue Pearl
-* DasFilament PETG 
-	* [Opalgrün](https://3dprintingdb.com/filament/661/das-filament-petg-opalgrun)
-	* Sturmgrau
-	* Anthrazit V2

openscad/foreign/modular multi-hdd case/Electronics/HardDisk.scad

@@ -0,0 +1,190 @@
+/**
+ * Genera un contenedor para almacenar discos duros.
+ *
+ * @author  Joaquín Fernández
+ * @url     https://gitlab.com/joaquinfq/openscad/blob/master/Electronics/HardDisk.scad
+ * @license CC-BY-NC-4.0
+ * @see     https://www.thingiverse.com/thing:3642857
+ */
+//---------------------------------------------------------------
+// Variables personalizables
+//---------------------------------------------------------------
+count     = 4;    // Cantidad de discos duros a almacenar.
+desktop   = false; // Indica si el disco duro es de PC (3.5") o portátil (2.5").
+notch     = true; // Indica si se genera el espacio para sacar el disco con el dedo.
+padding   = 20;   // Ancho de la pestaña a usar como separador entre discos.
+screws    = true; // Indica si se dejan los espacios para los tornillos.
+thickness = 2;  // Grosor de las paredes del contenedor.
+tolerance = 0.9;  // Tolerancia a usar en las medidas del disco duro.
+model     = 5;    // Tipo de disco duro (altura estándar):
+                  // 2.5"
+                  //    0: 19.05
+                  //    1: 17.00
+                  //    2: 15.00
+                  //    3: 12.70
+                  //    4: 10.50
+                  //    5:  9.50
+                  //    6:  8.47
+                  //    7:  7.00
+                  //    8:  5.00
+                  // 3.5"
+                  //    0: 42.00
+                  //    1: 26.10
+                  //    2: 17.80
+//---------------------------------------------------------------
+use <../Modules/Box/rounded.scad>
+use <../Modules/Models/SFF/8200.scad>
+use <../Modules/Models/SFF/8300.scad>
+//---------------------------------------------------------------
+// Valores calculados. No tocar sin estar seguro.
+//---------------------------------------------------------------
+size    = desktop
+            ? sff8300(tolerance = tolerance, type = model)
+            : sff8200(tolerance = tolerance, type = model);
+width   = size[desktop ? 3 : 4];
+height  = size[1];
+length  = size[desktop ? 2 : 6];
+dt      = 2 * thickness;
+d       = (height - dt) * 0.7;
+dy      = height + thickness;
+ty      = thickness + count * dy;
+epsilon = $preview ? 0.01 : 0;
+$fn     = $preview ? 60   : 180;
+
+/**
+ * Dibuja el separador de los discos.
+ *
+ * @param {Float} thickness Grosor del separador.
+ * @param {Float} radius    Radio a usar para redondear el borde.
+ * @param {Float} width     Ancho del espacio a dejar en el separador.
+ * @param {Float} length    Longitud del espacio a dejar en el separador.
+ */
+module separator(thickness = thickness, radius = 5, width = width - padding, length = length - padding)
+{
+    _r  = radius;
+    _r2 = _r * _r;
+    _w  = width / 2;
+    _a1 = _w - _r;
+    _a2 = _w + _r;
+    _b  =  length - _r;
+    linear_extrude(thickness)
+    {
+        polygon(
+            points = [
+                [   _a1, 0 ],
+                for (_x = [ 0 : 0.1 : _r ]) [ _x + _a1, - sqrt(_r2 - pow(_x, 2)) + _r ],
+                [    _w, _b ],
+                for (_x = [ - _r : 0.1 : 0 ]) [ _a2 + _x, sqrt(_r2 - pow(_x, 2)) + _b ],
+                [   _a2, _b +     _r ],
+                [   _a2, _b + 2 * _r ],
+                [ - _a2, _b + 2 * _r ],
+                [ - _a2, _b +     _r ],
+                for (_x = [ _r : -0.1 : 0 ]) [ - _a2 + _x, sqrt(_r2 - pow(_x, 2)) + _b ],
+                [ -  _w, _b ],
+                for (_x = [ _r : -0.1 : 0 ]) [ - (_x + _a1), - sqrt(_r2 - pow(_x, 2)) + _r ],
+                [ - _a1, 0 ],
+            ]
+        );
+    }
+}
+
+//---------------------------------------------------------------
+// Inicio del script.
+//---------------------------------------------------------------
+difference()
+{
+
+    boxRounded(width + dt, ty, length + thickness, 1.2, thickness);
+    for (n =  [ 0 : count - 1 ])
+    {
+        translate([ - width / 2, n * dy + thickness - ty / 2, - (length + thickness) / 2 + thickness ])
+        {
+            if (desktop)
+            {
+                sff8300Model(length + 5, screws ? dt : 0, slot = 5, tolerance = tolerance, type = model);
+            }
+            else
+            {
+                sff8200Model(length + 5, screws ? dt : 0, slot = 5, tolerance = tolerance, type = model);
+            }
+            if (notch)
+            {
+                hull()
+                {
+                    for (_x = [ d + thickness, width - (d + thickness) ])
+                    {
+                        translate([ _x, height / 2, - thickness / 2 ])
+                        {
+                            cylinder(h = 2 * dt, d = d, center = true);
+                        }
+                    }
+                }
+            }
+            if (n)
+            {
+                if (padding)
+                {
+                    translate([ width / 2, dt / 4, padding - dt ])
+                    {
+                        rotate([ 90, 0, 0 ])
+                        {
+                            separator(dt);
+                        }
+                    }
+                }
+                else
+                {
+                    translate([ width / 2, - epsilon, length / 2 ])
+                    {
+                        cube([ width, dt + 2 * epsilon, length ], center = true);
+                    }
+                }
+            }
+        }
+    }
+    translate([ 0, 0, (length + thickness) / 2 - dt / 2 + 0.01 ])
+    {
+        cube([ width, count * height, dt ], center = true);
+    }
+    rotate([90,0,0]){
+    translate([0,0,-25.8+thickness/2+0.1])cube([100,150,thickness+0.2],center=true);
+    }
+}
+
+
+
+hole_dia=4.5;
+rotate([90,0,0]){
+    translate([7.5,0,-25.8+thickness/2+0.1]){
+        difference(){
+            cube([110,103.35,thickness+0.2],center=true);
+            translate([-50,20,0]){
+                #cylinder(d=hole_dia,h=10,center=true);
+                translate([0,-64.45,0])#cylinder(d=hole_dia,h=10,center=true);
+                translate([83.5,20,0])#cylinder(d=hole_dia,h=10,center=true);
+            }
+        }
+    }
+//}
+
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    }

openscad/foreign/modular multi-hdd case/Functions/is.scad

@@ -0,0 +1,33 @@
+/**
+ * Diversas funciones para detectar el tipo de datos de un valor.
+ *
+ * @author  Joaquín Fernández
+ * @license CC-BY-NC-4.0
+ * @url     https://gitlab.com/joaquinfq/openscad/blob/master/Functions/is.scad
+ */
+/**
+ * Verifica si el valor es un array
+ *
+ * @param value Valor a verificar.
+ *
+ * @return `true` si el valor es un array.
+ */
+function isArray(x) = len(x) != undef && !isString(x);
+
+/**
+ * Verifica si el valor es un booleano
+ *
+ * @param value Valor a verificar.
+ *
+ * @return `true` si el valor es un booleano.
+ */
+function isBool(x) = !isString(x) && (str(x) == "true" || str(x) == "false");
+
+/**
+ * Verifica si el valor es un texto
+ *
+ * @param value Valor a verificar.
+ *
+ * @return `true` si el valor es un texto.
+ */
+function isString(x) = x != undef && len(x) != undef && len(str(x,x)) == len(x) * 2;

openscad/foreign/modular multi-hdd case/Modules/Box/rounded.scad

@@ -0,0 +1,137 @@
+/**
+ * Módulos para dibujar cajas con bordes redondeados.
+ *
+ * @author  Joaquín Fernández
+ * @url     https://gitlab.com/joaquinfq/openscad/blob/master/Modules/Box/rounded.scad
+ * @license CC-BY-NC-4.0
+ */
+//----------------------------------------------------------
+ use <../../Functions/is.scad>
+ //----------------------------------------------------------
+/**
+ * Genera las coordenadas para dibujar un rectángulo con las esquinas redondeadas.
+ * Cada esquina puede tener un radio diferente.
+ *
+ * @param {Float}   width  Ancho del rectángulo.
+ * @param {Float}   height Alto del rectángulo.
+ * @param {Float[]} radius Radios a usar para redondear cada esquina.
+ */
+function boxRoundedRect(width, height, radius = [ 1, 1, 1, 1 ]) = let(
+        _r = radius[0] == undef
+            ? [ radius, radius, radius, radius ]
+            : radius
+    )
+    [
+        [
+            [             0, height - _r[0] ],
+            [         _r[0], height - _r[0] ],
+            [         _r[0], height         ],
+            [ width - _r[1], height         ],
+            [ width - _r[1], height - _r[1] ],
+            [ width        , height - _r[1] ],
+            [ width        ,          _r[2] ],
+            [ width - _r[2],          _r[2] ],
+            [ width - _r[2],              0 ],
+            [         _r[3],              0 ],
+            [         _r[3],          _r[3] ],
+            [             0,          _r[3] ]
+        ],
+        [
+            [         _r[0], height - _r[0] ],
+            [ width - _r[1], height - _r[1] ],
+            [ width - _r[2],          _r[2] ],
+            [         _r[3],          _r[3] ]
+        ]
+    ];
+//----------------------------------------------------------
+/**
+ * Dibuja un bloque con los bordes XY redondeados.
+ *
+ * @param {Float}         width  Ancho del bloque (eje X).
+ * @param {Float}         height Largo del bloque (eje Y).
+ * @param {Float}         length Alto del bloque (eje Z).
+ * @param {Float|Float[]} radius Radios del borde de cada esquina.
+ */
+module boxRounded(width, height, length, radius = [ 1, 1, 1, 1 ])
+{
+    if (radius)
+    {
+        translate([ - width / 2, - height / 2, - length / 2 ])
+        {
+            linear_extrude(length)
+            {
+                boxRounded2d(width, height, radius);
+            }
+        }
+    }
+    else
+    {
+        cube([ width, height, length ], center = true);
+    }
+}
+//----------------------------------------------------------
+/**
+ * Dibuja un bloque con los bordes XY redondeados.
+ *
+ * @param {Float}         width  Ancho del bloque (eje X).
+ * @param {Float}         height Largo del bloque (eje Y).
+ * @param {Float|Float[]} radius Radios del borde de cada esquina.
+ */
+module boxRounded2d(width, height, radius = [ 1, 1, 1, 1 ])
+{
+    // Si se pasa un número, lo convertimos a un array.
+    _radius = isArray(radius)
+        ? radius
+        : [ radius, radius, radius, radius ];
+    _data = boxRoundedRect(width, height, _radius);
+    polygon(points = _data[0]);
+    for (_index = [ 0 : 3 ])
+    {
+        if (_radius[_index] > 0)
+        {
+            translate(_data[1][_index])
+            {
+                circle(r = _radius[_index]);
+            }
+        }
+    }
+}
+//----------------------------------------------------------
+/**
+ * Dibuja un bloque con todos los bordes redondeados.
+ *
+ * @param width  Ancho del bloque (eje X).
+ * @param height Largo del bloque (eje Y).
+ * @param length Alto del bloque (eje Z).
+ * @param radius Radio del borde.
+ */
+module boxRounded3d(width, height, length, radius = 1)
+{
+    if (radius > 0)
+    {
+        hull()
+        {
+            for (z = [ -1, 1 ])
+            {
+                for (y = [ -1, 1 ])
+                {
+                    for (x = [ -1, 1 ])
+                    {
+                        translate([
+                            x * (width  / 2 - radius),
+                            y * (height / 2 - radius),
+                            z * (length / 2 - radius)
+                        ])
+                        {
+                            sphere(r = radius, center = true);
+                        }
+                    }
+                }
+            }
+        }
+    }
+    else
+    {
+        cube([ width, height, length ], center = true);
+    }
+}

openscad/foreign/modular multi-hdd case/Modules/Box/tray.scad

@@ -0,0 +1,76 @@
+/**
+ * Genera una bandeja para insertar un modelo.
+ *
+ * @author  Joaquín Fernández
+ * @url     https://gitlab.com/joaquinfq/openscad/blob/master/Modules/Box/tray.scad
+ * @license CC-BY-NC-4.0
+ */
+//----------------------------------------------------------
+/**
+ * Permite dibujar una bandeja y decidir cuáles caras eliminar.
+ *
+ * Los lados de la bandeja se enumeran de la siguiente manera (con respecto al plano XZ):
+ *
+ * - a : Parte trasera.
+ * - b : Parte inferior.
+ * - l : Parte izquierda.
+ * - r : Parte derecha.
+ * - t : Parte superior.
+ *
+ * @param {Float}   width     Anchura de la bandeja a generar (eje X).
+ * @param {Float}   height    Altura de la bandeja a generar (eje Y).
+ * @param {Float}   length    Longitud de la bandeja a generar (eje Z).
+ * @param {Float}   thickness Grosor de las paredes de la bandeja.
+ * @param {Boolean} sides     Lados de la bandeja a omitir.
+ */
+module boxTray(width, height, length, thickness = 5, sides = [])
+{
+    _t = 2 * thickness;
+    difference()
+    {
+        cube([ width  + _t, height + _t, length + thickness ]);
+        translate([ thickness, thickness, 0 ])
+        {
+            if ($children)
+            {
+                children();
+            }
+            else
+            {
+                cube([ width, height, length ]);
+            }
+        }
+        for (_s = sides)
+        {
+            if (_s == "a")
+            {
+                translate([ 0, 0, length ])
+                {
+                    cube([ width  + _t, height + _t, _t ]);
+                }
+            }
+            else if (_s == "b")
+            {
+                cube([ width  + _t, thickness, length + _t ]);
+            }
+            else if (_s == "l")
+            {
+                translate([ width + thickness, 0, 0 ])
+                {
+                    cube([ thickness, height + _t, length + _t ]);
+                }
+            }
+            else if (_s == "r")
+            {
+                cube([ thickness, height + _t, length + _t ]);
+            }
+            else if (_s == "t")
+            {
+                translate([ 0, height + thickness, 0 ])
+                {
+                    cube([ width  + _t, thickness, length + _t ]);
+                }
+            }
+        }
+    }
+}

openscad/foreign/modular multi-hdd case/Modules/Models/SFF/8200.scad

@@ -0,0 +1,152 @@
+/**
+ * Modelos y variables según la especificación SFF-8200.
+ *
+ * @author  Joaquín Fernández
+ * @url     https://gitlab.com/joaquinfq/openscad/blob/master/Modules/Models/SFF/8200.scad
+ * @license CC-BY-NC-4.0
+ *
+ * @see     SFF-8200 2.5" Form Factor Drives
+ */
+//----------------------------------------------------------
+use <../../Box/tray.scad>
+use <../box.scad>
+//----------------------------------------------------------
+/**
+ * Devuelve las especificaciones de las medidas según SFF-8200.
+ *
+ * @param {Float}   tolerance Tolerancia a usar para ajustar las medidas.
+ * @param {Integer} type      Tipo de unidad (0: pequeña, 1: mediana, 2: grande).
+ *
+ * @return {Float[]}
+ */
+function sff8200(tolerance = 0, type = 0) = [
+      3.00, // Diámetro del tornillo
+     (
+         type == 0 
+            ? 19.05 
+            : type == 1 
+                ? 17.00 
+                : type == 2
+                    ? 15.00 
+                    : type == 3
+                        ? 12.70 
+                        : type == 4
+                            ? 10.50 
+                            : type == 5
+                                ? 9.50 
+                                : type == 6
+                                    ? 8.47
+                                    : type == 7
+                                        ? 7.00
+                                        : 5.00
+    ) + tolerance,
+      0.00,
+      0.50,
+     69.85 + tolerance,
+      0.25,
+    100.45 + tolerance,
+     undef,
+     undef,
+     undef,
+    100.20 + tolerance,     // #10
+    100.50 + tolerance,
+    110.20 + tolerance,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,                 // #20
+     undef,
+     undef,
+      3.00 + tolerance / 2,
+     34.93,
+     38.10,
+     undef,
+      0.50,
+      4.07 + tolerance / 2,
+     61.72,
+     34.93,                 // #30
+     38.10,
+     undef,
+      0.50,
+     undef,
+     undef,
+     undef,
+      8.00,
+      3.00,
+     undef,
+     undef,                 // #40
+      2.50,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,
+     undef,
+     14.00 + tolerance / 2, // #50
+     90.60 + tolerance / 2,
+     14.00 + tolerance / 2,
+     90.60 + tolerance / 2
+];
+//----------------------------------------------------------
+/**
+ * Dibuja un modelo de una unidad de 3.5" según la especificación SFF-8200.
+ *
+ * Este modelo permite extraer el volumen posteriormente para crear una ranura
+ * como las usadas en las cajas de PCs.
+ *
+ * @param {Float}   length    Longitud de la unidad a generar.
+ * @param {Float}   thickness Grosor del bloque donde se insertará el modelo.
+ * @param {Float}   screw     Diámetro del tornillo a usar.
+ * @param {Float}   slot      Longitud de la ranura donde se insertarán los tornillos.
+ * @param {Float}   tolerance Valor a usar para ajustar las medidas estándar.
+ * @param {Integer} type      Tipo de unidad (0: pequeña, 1: mediana, 2: grande).
+ */
+module sff8200Model(length = 0, thickness = 5, screw = 0, slot = 15, tolerance = 0.3, type = 0)
+{
+    _A = sff8200(tolerance, type);
+    modelBox(
+        _A[4],
+        _A[1],
+        length ? length : _A[6],
+        thickness,
+        screw ? screw : _A[0],
+        slot,
+        [
+            [ _A[23], _A[6] - _A[52] ],
+            [ _A[23], _A[6] - _A[53] ]
+        ],
+        [
+            [ _A[28],         _A[6] - _A[50] ],
+            [ _A[28],         _A[6] - _A[51] ],
+            [ _A[4] - _A[28], _A[6] - _A[50] ],
+            [ _A[4] - _A[28], _A[6] - _A[51] ]
+        ]
+    );
+}
+//----------------------------------------------------------
+/**
+ * Dibuja una bandeja que puede insertarse en una ranura donde va una unidad de 3.5".
+ *
+ * @param {Float}   length    Longitud de la unidad a generar.
+ * @param {Float}   thickness Grosor del bloque donde se insertará el modelo.
+ * @param {Float}   screw     Diámetro del tornillo a usar.
+ * @param {Float}   slot      Longitud de la ranura donde se insertarán los tornillos.
+ * @param {Float}   tolerance Valor a usar para ajustar las medidas estándar.
+ * @param {Boolean} sides     Lados a eliminar de la bandeja.
+ * @param {Integer} type      Define la altura según el tipo de unidad (0: más grande, 8: más pequeña).
+ */
+module sff8200Tray(length = 0, thickness = 5, screw = 0, slot = 15, tolerance = 0.3, sides = [ "a", "t" ], type = 0)
+{
+    _A = sff8200(tolerance, type);
+    boxTray(_A[4], _A[1], length ? length : _A[6], thickness, sides)
+    {
+        sff8200Model(length, thickness, screw  ? screw : _A[0], slot, tolerance, type);
+    }
+}
+//sff8200Tray();

openscad/foreign/modular multi-hdd case/Modules/Models/SFF/8300.scad

@@ -0,0 +1,95 @@
+/**
+ * Modelos y variables según la especificación SFF-8300.
+ *
+ * @author  Joaquín Fernández
+ * @url     https://gitlab.com/joaquinfq/openscad/blob/master/Modules/Models/SFF/8300.scad
+ * @license CC-BY-NC-4.0
+ *
+ * @see     SFF-8300 3.5" Form Factor Drives
+ */
+//----------------------------------------------------------
+use <../../Box/tray.scad>
+use <../box.scad>
+//----------------------------------------------------------
+/**
+ * Devuelve las especificaciones de las medidas según SFF-8300.
+ *
+ * @param {Float}   tolerance Tolerancia a usar para ajustar las medidas.
+ * @param {Integer} type      Tipo de unidad (0: pequeña, 1: mediana, 2: grande).
+ *
+ * @return {Float[]}
+ */
+function sff8300(tolerance = 0, type = 1) = [
+      3.00, // Diámetro del tornillo
+     type == 0 ? 42.00 : (type == 1 ? 26.10 : 17.80) + tolerance,
+    147.00 + tolerance,
+    101.60 + tolerance,
+     95.25 + tolerance,
+      3.18,
+     44.45 + tolerance / 2,
+     41.28 + tolerance / 2,
+     28.50 + tolerance / 2,
+    101.60 + tolerance / 2,
+      6.35 + tolerance / 2,
+      0.25,
+      0.50,
+     76.20 + tolerance / 2
+];
+//----------------------------------------------------------
+/**
+ * Dibuja un modelo de una unidad de 3.5" según la especificación SFF-8300.
+ *
+ * Este modelo permite extraer el volumen posteriormente para crear una ranura
+ * como las usadas en las cajas de PCs.
+ *
+ * @param {Float}   length    Longitud de la unidad a generar.
+ * @param {Float}   thickness Grosor del bloque donde se insertará el modelo.
+ * @param {Float}   screw     Diámetro del tornillo a usar.
+ * @param {Float}   slot      Longitud de la ranura donde se insertarán los tornillos.
+ * @param {Float}   tolerance Valor a usar para ajustar las medidas estándar.
+ * @param {Integer} type      Tipo de unidad (0: pequeña, 1: mediana, 2: grande).
+ */
+module sff8300Model(length = 0, thickness = 5, screw = 0, slot = 15, tolerance = 0.3, type = 0)
+{
+    _A = sff8300(tolerance, type);
+    modelBox(
+        _A[3],
+        _A[1],
+        length ? length : _A[2],
+        thickness,
+        screw ? screw : _A[0],
+        slot,
+        [
+            [ _A[10], _A[2] - _A[8]         ],
+            [ _A[10], _A[2] - _A[8] - _A[9] ]
+        ],
+        [
+            [ _A[5],         _A[2] - _A[7]          ],
+            [ _A[5],         _A[2] - _A[7] - _A[6]  ],
+            [ _A[5],         _A[2] - _A[7] - _A[13] ],
+            [ _A[3] - _A[5], _A[2] - _A[7]          ],
+            [ _A[3] - _A[5], _A[2] - _A[7] - _A[6]  ],
+            [ _A[3] - _A[5], _A[2] - _A[7] - _A[13] ]
+        ]
+    );
+}
+//----------------------------------------------------------
+/**
+ * Dibuja una bandeja que puede insertarse en una ranura donde va una unidad de 3.5".
+ *
+ * @param {Float}   length    Longitud de la unidad a generar.
+ * @param {Float}   thickness Grosor del bloque donde se insertará el modelo.
+ * @param {Float}   screw     Diámetro del tornillo a usar.
+ * @param {Float}   slot      Longitud de la ranura donde se insertarán los tornillos.
+ * @param {Float}   tolerance Valor a usar para ajustar las medidas estándar.
+ * @param {Boolean} sides     Lados a eliminar de la bandeja.
+ * @param {Integer} type      Define la altura según el tipo de unidad (0: grande, 1: mediana, 2: pequeña).
+ */
+module sff8300Tray(length = 0, thickness = 5, screw = 0, slot = 15, tolerance = 0.3, sides = [ "a", "t" ], type = 1)
+{
+    _A = sff8300(tolerance, type);
+    boxTray(_A[3], _A[1], length ? length : _A[2], thickness, sides)
+    {
+        sff8300Model(length, thickness, screw  ? screw : _A[0], slot, tolerance, type);
+    }
+}

openscad/foreign/modular multi-hdd case/Modules/Models/box.scad

@@ -0,0 +1,82 @@
+/**
+ * Modelo que dibuja una caja que puede tener tornillos y ranuras y que
+ * puede usarse como un negativo sobre otra caja y obtener la diferencia.
+ *
+ * @author  Joaquín Fernández
+ * @url     https://gitlab.com/joaquinfq/openscad/blob/master/Modules/Models/box.scad
+ * @license CC-BY-NC-4.0
+ *
+ * @param {Float}   width     Anchura del modelo a generar.
+ * @param {Float}   height    Altura del modelo a generar.
+ * @param {Float}   length    Longitud del modelo a generar.
+ * @param {Float}   thickness Grosor del bloque donde se insertará el modelo.
+ * @param {Float}   screw     Diámetro del tornillo a usar.
+ * @param {Float}   slot      Longitud de la ranura donde se insertarán los tornillos.
+ * @param {Float}   tolerance Valor a usar para ajustar las medidas estándar.
+ * @param {Float[]} side      Coordenadas de los agujeros laterales.
+ * @param {Float[]} bottom    Coordenadas de los agujeros inferiores.
+ */
+module modelBox(width, height, length, thickness, screw = 0, slot = 0, side = [], bottom = [])
+{
+    cube([ width, height, length ]);
+    // Agujeros laterales
+    for (_side = side)
+    {
+        if (slot)
+        {
+            hull()
+            {
+                for (_n = [ - slot / 2, slot / 2 ])
+                {
+                    translate([ width / 2, _side[0], _side[1] + _n ])
+                    {
+                        rotate([ 0, 90, 0 ])
+                        {
+                            cylinder(d = screw, h = width + thickness * 2, center = true);
+                        }
+                    }
+                }
+            }
+        }
+        else
+        {
+            translate([ width / 2, _side[0], _side[1] ])
+            {
+                rotate([ 0, 90, 0 ])
+                {
+                    cylinder(d = screw, h = width + thickness * 2, center = true);
+                }
+            }
+        }
+    }
+    // Agujeros inferiores
+    for (_bottom = bottom)
+    {
+        if (slot)
+        {
+            hull()
+            {
+                for (_n = [ - slot / 2, slot / 2 ])
+                {
+                    translate([ width - _bottom[0], 0, _bottom[1] + _n ])
+                    {
+                        rotate([ 90, 0, 0 ])
+                        {
+                            cylinder(d = screw, h = thickness);
+                        }
+                    }
+                }
+            }
+        }
+        else
+        {
+            translate([ width - _bottom[0], 0, _bottom[1] ])
+            {
+                rotate([ 90, 0, 0 ])
+                {
+                    cylinder(d = screw, h = thickness);
+                }
+            }
+        }
+    }
+}

openscad/foreign/parametric-helix_haystack-mod/haystack_logo_final.svg

@@ -0,0 +1,58 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   version="1.1"
+   id="svg1"
+   width="501.33334"
+   height="178.66667"
+   viewBox="0 0 501.33334 178.66667"
+   sodipodi:docname="haystack_logo_final.svg"
+   inkscape:version="1.4.2 (ebf0e940d0, 2025-05-08)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs1" />
+  <sodipodi:namedview
+     id="namedview1"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     showguides="true"
+     inkscape:zoom="3.2546641"
+     inkscape:cx="109.84236"
+     inkscape:cy="69.899687"
+     inkscape:window-width="5120"
+     inkscape:window-height="1372"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="g1">
+    <sodipodi:guide
+       position="154.87316,107.74798"
+       orientation="0,-1"
+       id="guide1"
+       inkscape:locked="false" />
+    <sodipodi:guide
+       position="408.0677,50.320605"
+       orientation="0,-1"
+       id="guide3"
+       inkscape:locked="false" />
+  </sodipodi:namedview>
+  <g
+     inkscape:groupmode="layer"
+     inkscape:label="Image"
+     id="g1">
+    <path
+       style="fill:#000000"
+       d="m 125.31473,153.15745 c 0.32361,-24.84341 -1.74527,-36.06144 -15.89944,-59.045268 l -8.85996,-14.386967 7.07083,-9.514556 11.98249,18.707475 c 7.74992,12.099446 10.95559,19.597976 13.01655,26.841556 0,0 2.84053,10.88974 3.5787,16.45382 0.94049,7.08905 1.0643,21.42708 1.0643,21.42708 l -0.23925,21.48138 -12,-0.0257 z m 82.26852,-25.32179 c -6.79765,-2.22596 -13.88764,-8.07626 -13.88764,-8.07626 -0.0381,-0.0342 7.06667,-8.68224 7.06667,-8.68224 l 3.97035,2.82714 c 4.76565,3.39344 14.1229,5.58756 17.8505,4.92645 7.75546,-1.37545 11.77629,-9.95953 -6.04897,-13.2625 -8.90014,-1.64917 -18.51381,-7.201061 -20.27411,-13.076441 -1.91807,-6.401928 -0.98605,-10.686611 3.47881,-15.992791 4.2928,-5.101702 11.3218,-5.722837 18.4607,-5.622832 5.37668,0.07532 18.16272,6.300787 18.16272,6.300787 -1.16603,2.619741 -5.57525,9.875482 -5.52415,9.753794 l -5.18481,-2.64509 c -5.38579,-2.747624 -11.35893,-3.054762 -14.85768,-2.011576 -3.63087,1.08258 -4.75459,4.871973 -3.5225,7.684615 1.37813,3.146015 7.67926,3.591052 14.93801,6.045572 6.82697,2.308517 13.24941,4.392612 16.42394,10.862102 1.23243,2.51163 0.96349,9.02362 -0.96472,12.17885 -5.56569,9.10741 -17.21942,13.00406 -30.08712,8.79042 z m 166.0103,-21.46368 c -1.48309,-5.04618 -0.96418,-10.512542 0.0329,-13.776365 2.71295,-8.880641 8.85017,-17.298301 16.66143,-19.951358 10.42808,-3.541848 21.40674,-2.539274 30.4917,2.764525 l 4.96483,2.898471 -8.1308,9.863975 -4.81172,-3.265321 c -11.86273,-8.050262 -27.90952,0.261204 -26.96689,14.611162 1.02816,15.652231 18.50059,21.256421 27.6218,13.634681 l 3.94927,-3.30003 8.74709,8.96434 -3.70726,3.26268 c -7.06847,6.2208 -20.648,8.33008 -30.89871,4.70033 -5.42498,-1.92097 -14.3365,-8.0999 -17.95364,-20.40709 z M 1.6956149,99.640587 V 70.97392 h 6.666667 6.6666671 V 82.307253 93.640587 H 26.362282 37.695616 V 82.307253 70.97392 h 6.666667 6.666666 V 99.640587 128.30725 H 44.362283 37.695616 V 116.97392 105.64059 H 26.362282 15.028949 v 11.33333 11.33333 H 8.3622819 1.6956149 Z M 63.744232,123.30725 C 66.59586,106.25446 72.803233,91.979161 86.155074,71.7683 99.916134,50.938014 102.37972,46.387822 106.4375,34.307252 c 2.60391,-7.752186 3.60534,-13.490071 3.66513,-21.000001 l 0.0823,-10.3333329 h 5.75535 5.75536 V 13.360453 c 0,19.163686 -9.07772,38.383291 -27.068015,65.884254 -5.82228,8.900256 -7.72078,14.126075 -8.14179,14.284256 0,0 10.279841,0.111624 14.992315,0.111624 l 6.36555,11.794273 c -9.122675,0.28357 -18.252151,0.20573 -27.378076,0.20573 l -2.051657,6.90866 c -1.128409,3.79977 -2.231702,9.42558 -2.377543,10.69079 l -0.584097,5.06721 H 62.908115 Z m 87.284718,-5.92984 V 106.44756 L 140.36228,89.560489 C 134.49561,80.272597 129.6413,70.954628 129.6413,70.954628 c 3.02508,0.01727 3.48035,0.01929 14.21082,0.01929 l 6.52282,11.287817 c 3.58755,6.2083 6.78856,11.022071 7.11337,10.697268 4.54102,-6.974921 8.67985,-14.884864 12.95875,-22.024512 0,0 0.0136,-0.09172 14.09563,0.02395 -3.02169,6.848287 -7.33158,12.932566 -11.34972,19.234764 l -10.16402,15.885945 v 11.11405 11.11405 h -6 -6 z M 268.36228,105.64059 V 82.97392 h -8.66666 -8.66667 v -6 -6 h 24 24 v 6 6 h -8.66667 -8.66666 v 22.66667 22.66666 h -6.66667 -6.66667 z m 34.44941,22.64966 c 0,0 24.93638,-57.405468 24.88185,-57.405468 h 10.77302 l 25.05122,57.384868 -13.60161,0.0376 -4.40063,-11.8202 -25.49513,0.10667 -3.88035,11.71353 z m 30.04155,-42.965528 c -2.46505,6.333771 -4.90586,12.677133 -7.44293,18.982528 h 14.91306 c -2.51572,-6.317459 -5.04821,-12.628324 -7.47013,-18.982528 z M 443.02895,70.97392 h 12 l 0.1282,24.666667 23.20512,-24.68097 15.9444,0.0144 -22.50614,25.526067 c -0.008,-0.0046 6.09017,8.557266 12.1859,16.807266 l 11.08313,15 h -15.60774 l -17.09955,-23.8 -7.33334,6.96558 v 16.83432 h -12 z M 85.424934,47.905541 C 81.606985,36.351334 82.045145,35.705457 81.718464,29.562339 l -0.0228,-5.255087 h 6 6 l 0.0158,3.666666 c 0.009,2.016667 0.87911,6.910332 1.93423,10.874812 l 1.9184,7.208145 -8.445544,11.929437 -1.62963,-3.83456 z"
+       id="path1"
+       sodipodi:nodetypes="ssccssacccssccssssssccsssssssssssccsssccsssscccccccccccccccccccccccscsccccssscccssccsccsccssccsccccccccccccccccccccccccccccccccccccccccccccccccccccccccscccsc" />
+  </g>
+</svg>

openscad/foreign/parametric-helix_haystack-mod/helix_haystack.scad

@@ -0,0 +1,97 @@
+// number of fragments | a higher fragment count will result in slower render times '20' is sufficient.
+fn = 30; // [0:100]
+//  "sugar phosphate backbones" | part of helix_base module | if adjusted also consider adjusting 'post_distance_apart' or 'center_bridge_length'.
+post_radius = 3.5; // [0:500]
+post_hole_radius = 1.25; // [0:500]
+// part of helix_base module | if adjusted also consider adjusting 'center_bridge_length'.
+post_distance_apart = 15; // [0:500]
+// "base pairs" length between "sugar phosphate backbones" | part of helix_base module | if adjusted also consider adjusting 'post_distance_apart'.
+center_bridge_length = 24; // [0:500]
+// part of helix_base module | thickness of "basepairs" in relevence to the the Y-axis of 'helix_base' before "linear_extrude" is implemented. further explanation is below.
+center_bridge_width = .8; // [0:0.1:500]
+// 'helix_height' adjusts the height of the linear_extruded 'helix_base' module | 'helix_height, helix_twists, helix_twists' all work hand in hand and should be experimented to fully understand the linear_extrude's nature.
+helix_height = 120; // [0:500]
+// 'helix_twists' adjusts the degree of twist in the linear_extruded 'helix_base' module.
+helix_twists = 400; // [0:3600]
+// 'helix_slices' adjusts the number of slices used in the linear_extruded 'helix_base' module | more slices = higher resolution and longer render times, less slices = the contrary | 200 is sufficient.
+helix_slices = 600; // [0:500]
+// this is fun try changing from 0-3 to scale 'helix_base' as it reaches its specified height in 'helix_height' | '1' = 1to1 scale, 0 = 1to0, 2 = 1to2 scale and so on in sequential order.
+helix_scale = 1; // [0:10]
+// the radius of the differenced circle that creates the spaces between each "base pair" | if adjusted you may also want to adjust 'center_bridge_length' and 'post_distance_apart'.
+spacer_radius = 11.6; // [0:500]
+// the height of the differenced circle changing this will result in a visual thickness change, in the Z-axis, of each "basepair".
+spacer_height = 4; // [0:550]
+// the point in the Z-axis at which the spacers will start appearing | 'spacer_start, spacer_increment_distance, and spacer_increment_height all work together to create the "base pairs/ bridges" that appear between each "sugar phosphate backbone/post".
+spacer_start = 0; // [0:550]
+// the distance between each spacer changing this will result in a visual thickness change, in the Z-axis, of each "basepair".
+spacer_increment_distance = 6; // [0:500]
+// the height to which the spacers ascend to and then stop being produced.
+spacer_increment_height = helix_height; // [0:500]
+// the radius of the circle where the standing platform is located at the base of the helix.
+base_platform_radius = 30; // [0:500]
+base_platform_inner_radius = 25;
+// the height of the above said platform.
+base_platform_height = 12; // [0:100]
+// the controls the number of sides the platform has, 0 defaults to 'fn'.  3, 4, 5, 6 ...
+base_platform_shape = 6; // [0:50]
+
+usb_mount_hole_spacing = 15; // 19-(2*2) ?
+usb_mount_hole_dia = 2.0; // ?
+usb_height = 4.1;
+usb_rectangular_width = 11+1; //presumeably this is 19-4-4 = 11 plus one for wiggle room. needs testing. 
+
+module helix_basic(){
+    translate([-post_distance_apart,0,0]){
+        difference(){
+            circle(post_radius,$fn = fn);
+            circle(post_hole_radius,$fn = fn);
+        }
+    }
+    translate([post_distance_apart,0,0]){
+        difference(){
+            circle(post_radius, $fn = fn);
+            circle(post_hole_radius, $fn = fn);
+        }
+       
+    }
+
+    square([center_bridge_length,center_bridge_width],center = true);
+}
+// the basic 2D shape that the helix is extruded upon.
+union(){
+    difference(){
+        linear_extrude(height = helix_height, twist = helix_twists, slices =    helix_slices, scale = helix_scale){
+            helix_basic();
+        }
+        for (a = [ spacer_start : spacer_increment_distance : spacer_increment_height])
+            translate([0, 0, a]) {
+                linear_extrude(height = spacer_height, center = true){
+                    circle(spacer_radius, $fn = fn);
+                }
+            }
+    }
+ rotate([0,0,helix_twists+90+3*post_radius-0.5]){
+    translate([post_distance_apart,0,helix_height])scale([1,1,0.25])sphere(r = post_radius, $fn = fn);
+    translate([-post_distance_apart,0,helix_height])scale([1,1,0.25])sphere(r = post_radius, $fn = fn);
+ }
+}
+translate([0,0,-base_platform_height/2])difference(){
+    hull(){ // base
+        translate([0,0,base_platform_height/3])cylinder(r = base_platform_radius-(base_platform_height/2), h = base_platform_height/3, center = true, $fn = base_platform_shape);  
+        translate([0,0,-base_platform_height/4])cylinder(r = base_platform_radius, h = base_platform_height/2, center = true, $fn = base_platform_shape);          
+    }
+    translate([post_distance_apart,0,(base_platform_height/2)-(base_platform_height/4)])cylinder(r1 = post_hole_radius*2, r2 = post_hole_radius, h = base_platform_height/2+0.2, center = true, $fn = fn);  
+    translate([-post_distance_apart,0,(base_platform_height/2)-(base_platform_height/4)])cylinder(r1 = post_hole_radius*2, r2 = post_hole_radius, h = base_platform_height/2+0.2, center = true, $fn = fn);  
+    translate([0,0,-base_platform_height/2+0.01])cylinder(r = base_platform_inner_radius, h = base_platform_height, center = true, $fn = base_platform_shape);  
+    translate([0,0,-base_platform_height/2+1-0.01])cylinder(r = base_platform_inner_radius+2, h = 2, center = true, $fn = base_platform_shape);
+    // todo: add cutout through base for filament-leds, because they don't reach to the bottom!
+    // usb-module:
+    translate([0,base_platform_radius*0.75,- base_platform_height/6])rotate([90,0,0])cube([usb_rectangular_width,usb_height,15],center=true); //cylinder(d = usb_height, h = 10, center = true, $fn = fn);
+    translate([usb_mount_hole_spacing/2,base_platform_radius*0.75,- base_platform_height/6])rotate([90,0,0])cylinder(d = usb_mount_hole_dia, h = 10, center = true, $fn = base_platform_shape);
+    translate([-usb_mount_hole_spacing/2,base_platform_radius*0.75,- base_platform_height/6])rotate([90,0,0])cylinder(d = usb_mount_hole_dia, h = 10, center = true, $fn = base_platform_shape);
+}
+// baseplate with pry-hole:
+translate([0,0,-15])difference(){
+    translate([0,0,(-base_platform_height/2+1-0.01)])cylinder(r = base_platform_inner_radius+2, h = 2-0.2, center = true, $fn = base_platform_shape);
+    for (x = [ base_platform_radius*0.75 , -base_platform_radius*0.75 ])translate([0,x,(-base_platform_height/2+1-0.01)])cube([10,2,2+0.01], center=true);
+}

openscad/foreign/parametric-helix_haystack-mod/helix_haystack_text.scad

@@ -0,0 +1,134 @@
+// number of fragments | a higher fragment count will result in slower render times '20' is sufficient.
+fn = 30; // [0:100]
+//  "sugar phosphate backbones" | part of helix_base module | if adjusted also consider adjusting 'post_distance_apart' or 'center_bridge_length'.
+post_radius = 5; // [0:500]
+post_hole_radius = 1.75; // [0:500]
+// part of helix_base module | if adjusted also consider adjusting 'center_bridge_length'.
+post_distance_apart = 25; // [0:500]
+// "base pairs" length between "sugar phosphate backbones" | part of helix_base module | if adjusted also consider adjusting 'post_distance_apart'.
+center_bridge_length = 55; // [0:500]
+// part of helix_base module | thickness of "basepairs" in relevence to the the Y-axis of 'helix_base' before "linear_extrude" is implemented. further explanation is below.
+center_bridge_width = 1.6; // [0:0.1:500]
+// 'helix_height' adjusts the height of the linear_extruded 'helix_base' module | 'helix_height, helix_twists, helix_twists' all work hand in hand and should be experimented to fully understand the linear_extrude's nature.
+helix_height = 165; // [0:500]
+// 'helix_twists' adjusts the degree of twist in the linear_extruded 'helix_base' module.
+helix_twists = 400; // [0:3600]
+// 'helix_slices' adjusts the number of slices used in the linear_extruded 'helix_base' module | more slices = higher resolution and longer render times, less slices = the contrary | 200 is sufficient.
+helix_slices = 600; // [0:500]
+// this is fun try changing from 0-3 to scale 'helix_base' as it reaches its specified height in 'helix_height' | '1' = 1to1 scale, 0 = 1to0, 2 = 1to2 scale and so on in sequential order.
+helix_scale = 1; // [0:10]
+// the radius of the differenced circle that creates the spaces between each "base pair" | if adjusted you may also want to adjust 'center_bridge_length' and 'post_distance_apart'.
+spacer_radius = 20.25; // [0:500]
+// the height of the differenced circle changing this will result in a visual thickness change, in the Z-axis, of each "basepair".
+spacer_height = 6; // [0:550]
+// the point in the Z-axis at which the spacers will start appearing | 'spacer_start, spacer_increment_distance, and spacer_increment_height all work together to create the "base pairs/ bridges" that appear between each "sugar phosphate backbone/post".
+spacer_start = 0; // [0:550]
+// the distance between each spacer changing this will result in a visual thickness change, in the Z-axis, of each "basepair".
+spacer_increment_distance = 9; // [0:500]
+// the height to which the spacers ascend to and then stop being produced.
+spacer_increment_height = helix_height; // [0:500]
+// the radius of the circle where the standing platform is located at the base of the helix.
+base_platform_radius = 52.5; // [0:500]
+base_platform_inner_radius = 47.5;
+// the height of the above said platform.
+base_platform_height = 20; // [0:100]
+// the controls the number of sides the platform has, 0 defaults to 'fn'.  3, 4, 5, 6 ...
+base_platform_shape = 6; // [0:50]
+
+usb_mount_hole_spacing = 15; // 19-(2*2) ?
+usb_mount_hole_dia = 2.0; // ?
+usb_height = 4.1;
+usb_rectangular_width = 11+1; //presumeably this is 19-4-4 = 11 plus one for wiggle room. needs testing. 
+text=true;
+textdepth=2;
+usb=false;
+
+module logo(path,scale){
+    translate([0,0,0]){
+        scale([scale,scale,1]){
+            linear_extrude(textdepth){
+                import(path,center=true);
+            }
+        }
+    }
+}
+
+module helix_basic(){
+    translate([-post_distance_apart,0,0]){
+        difference(){
+            circle(post_radius,$fn = fn);
+            if(usb){
+                circle(post_hole_radius,$fn = fn);
+            }
+        }
+    }
+    translate([post_distance_apart,0,0]){
+        difference(){
+            circle(post_radius, $fn = fn);
+            if(usb){
+                circle(post_hole_radius, $fn = fn);
+            }
+        }
+       
+    }
+
+    square([center_bridge_length,center_bridge_width],center = true);
+}
+// the basic 2D shape that the helix is extruded upon.
+union(){
+    difference(){
+        linear_extrude(height = helix_height, twist = helix_twists, slices =    helix_slices, scale = helix_scale){
+            helix_basic();
+        }
+        for (a = [ spacer_start : spacer_increment_distance : spacer_increment_height])
+            translate([0, 0, a]) {
+                linear_extrude(height = spacer_height, center = true){
+                    circle(spacer_radius, $fn = fn);
+                }
+            }
+    }
+    // elipsoids on top to cover up the led-holes:
+    rotate([0,0,helix_twists+90+2.1*post_radius-0.5]){
+        translate([post_distance_apart,0,helix_height])scale([1,1,0.25])sphere(r = post_radius, $fn = fn);
+        translate([-post_distance_apart,0,helix_height])scale([1,1,0.25])sphere(r = post_radius, $fn = fn);
+    }
+}
+translate([0,0,-base_platform_height/2])difference(){
+    hull(){ // base
+        translate([0,0,base_platform_height/3])cylinder(r = base_platform_radius-(base_platform_height/2), h = base_platform_height/3, center = true, $fn = base_platform_shape);  
+        translate([0,0,-base_platform_height/4])cylinder(r = base_platform_radius, h = base_platform_height/2, center = true, $fn = base_platform_shape);          
+    }
+    if(usb){
+        translate([post_distance_apart,0,(base_platform_height/2)-(base_platform_height/4)])cylinder(r1 = post_hole_radius*2, r2 = post_hole_radius, h = base_platform_height/2+0.2, center = true, $fn = fn);  
+        translate([-post_distance_apart,0,(base_platform_height/2)-(base_platform_height/4)])cylinder(r1 = post_hole_radius*2, r2 = post_hole_radius, h = base_platform_height/2+0.2, center = true, $fn = fn);  
+    
+    //bottom cutout narrow:
+    translate([0,0,-base_platform_height/2+0.01])cylinder(r = base_platform_inner_radius, h = base_platform_height, center = true, $fn = base_platform_shape);  
+    //bottom cutout wide:
+    translate([0,0,-base_platform_height/2+1-0.01])cylinder(r = base_platform_inner_radius+2, h = 2, center = true, $fn = base_platform_shape);
+    // only draw usb-module-cutouts if desired:
+    
+        // usb-module:
+        translate([0,base_platform_radius*0.75,- base_platform_height/6])rotate([90,0,0])cube([usb_rectangular_width,usb_height,15],center=true); //cylinder(d = usb_height, h = 10, center = true, $fn = fn);
+        // usb-screw-holes:
+        translate([usb_mount_hole_spacing/2,base_platform_radius*0.75,- base_platform_height/6])rotate([90,0,0])cylinder(d = usb_mount_hole_dia, h = 15, center = true, $fn = base_platform_shape);
+        translate([-usb_mount_hole_spacing/2,base_platform_radius*0.75,- base_platform_height/6])rotate([90,0,0])cylinder(d = usb_mount_hole_dia, h = 15, center = true, $fn = base_platform_shape);
+    }
+    if(text){
+        rotate([49,0,0]){
+            translate([0,-23.25,32.35]){
+                #logo("haystack_logo_final.svg",0.2);
+            }
+        }
+    }
+}
+// baseplate with pry-hole:
+if(usb){
+    translate([0,0,-15]){
+        difference(){
+            translate([0,0,(-base_platform_height/2+1-0.01)])cylinder(r = base_platform_inner_radius+2, h = 2-0.2, center = true, $fn = base_platform_shape);
+            for (x = [ base_platform_radius*0.80 , -base_platform_radius*0.80 ])translate([0,x,(-base_platform_height/2+1-0.01)])cube([10,2,2+0.01], center=true);
+        }
+    }
+}
+

openscad/own/2d-to-3d-scad/gonicus/gonicus.scad

@@ -3,23 +3,23 @@
 h=3;  //height
 w=20;  //width
 l=75; //lenght
-hd=7.5;  //hole_dia
+hd=w/2.25;  //hole_dia
 emd=1.25;  // embossing depth
+q=0.01;  // minimal value to avoid visual glitches
 $fn=100; //resolution
 // ###############
 difference(){ 
-    translate([0,0,h/2*1]){
+    translate([0,0,h/2]){
         hull(){
-            translate([+(l-w)/2,0,0])cylinder(h=h,r=w/2,center=true,$fn=100);
-            translate([-(l-w)/2,0,0])cylinder(h=h,r=w/2,center=true,$fn=100);
-        }    
-    }
-    translate([w/4,0,h-emd]){
-        scale([0.3,0.3,1]){
-            linear_extrude(height = h){
-                import("src/GONICUS-Logo_2022_logo-only.svg",center=true);
-            }
+            for(x=[(l-w)/2,-(l-w)/2]){
+                translate([x,0,0])cylinder(h=h,r=w/2,center=true); // body
+    }}}
+    translate([-(l/2)+(w/3),0,h/2]){
+        cylinder(h=h+q,r=hd/2,center=true); // keychain-hole
         }
-    }
-    translate([-(l/2)+(w/3),0,h/2])cylinder(h=h+0.1,r=hd/2,center=true);
-}
+    translate([w/4,0,h-emd]){
+        scale([0.4,0.4,1]){
+            linear_extrude(height = emd+q){
+                import("src/GONICUS-Logo_2022_logo-only-new.svg",center=true); // logo
+    }}}
+}

openscad/own/2d-to-3d-scad/gonicus/src/GONICUS-Logo_2022_logo-only-new.svg

@@ -0,0 +1,158 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   width="143.12636mm"
+   height="25.433369mm"
+   viewBox="0 0 143.12636 25.433369"
+   version="1.1"
+   id="svg1"
+   inkscape:version="1.4.2 (ebf0e940d0, 2025-05-08)"
+   sodipodi:docname="GONICUS-Logo_2022_logo-only-new.svg"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <sodipodi:namedview
+     id="namedview1"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:document-units="mm"
+     inkscape:zoom="1.036062"
+     inkscape:cx="377.87314"
+     inkscape:cy="63.220154"
+     inkscape:window-width="5120"
+     inkscape:window-height="1372"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="layer1" />
+  <defs
+     id="defs1">
+    <clipPath
+       id="SVGID_2_">
+		<rect
+   id="use9"
+   x="148"
+   y="229.71001"
+   width="540.95001"
+   height="136.57001" />
+
+	</clipPath>
+    <clipPath
+       id="clipPath1">
+		<rect
+   id="use1"
+   x="148"
+   y="229.71001"
+   width="540.95001"
+   height="136.57001" />
+
+	</clipPath>
+    <clipPath
+       id="clipPath2">
+		<rect
+   id="use2"
+   x="148"
+   y="229.71001"
+   width="540.95001"
+   height="136.57001" />
+
+	</clipPath>
+    <clipPath
+       id="clipPath3">
+		<rect
+   id="use3"
+   x="148"
+   y="229.71001"
+   width="540.95001"
+   height="136.57001" />
+
+	</clipPath>
+    <clipPath
+       id="clipPath4">
+		<rect
+   id="use4"
+   x="148"
+   y="229.71001"
+   width="540.95001"
+   height="136.57001" />
+
+	</clipPath>
+    <clipPath
+       id="clipPath5">
+		<rect
+   id="use5"
+   x="148"
+   y="229.71001"
+   width="540.95001"
+   height="136.57001" />
+
+	</clipPath>
+  </defs>
+  <g
+     inkscape:label="Ebene 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     transform="translate(-5.0263979,-131.7625)">
+    <g
+       id="g2-1"
+       transform="matrix(0.26458333,0,0,0.26458333,4.9386488,131.58535)"
+       inkscape:highlight-color="#aaaaaa">
+      <path
+         class="st0"
+         d="m 415.1,265.77 -10.5,58.68 h 26.88 l 10.5,-58.68 z m 6.45,-36.06 -4.13,23.06 h 26.87 l 4.13,-23.06 z"
+         id="path4-8"
+         style="display:inline;fill:#000000;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         transform="translate(-147.66835,-228.54044)" />
+      <path
+         style="display:inline;fill:#000000;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         id="path12-7"
+         clip-path="url(#SVGID_2_)"
+         d="m 316.76,324.45 17.09,-94.74 h 48.44 c 0,0 8.38,0.03 13.97,4.53 5.59,4.5 7.09,10.56 7.56,13.88 0.47,3.31 0.53,7.13 -0.63,13.56 -1.16,6.44 -11.31,62.78 -11.31,62.78 h -26.81 l 11.56,-64.41 c 0,0 2.03,-7.16 -6.41,-7.22 -8.44,-0.06 -13.69,-0.06 -13.69,-0.06 l -12.88,71.69 h -26.89 z"
+         class="st1"
+         transform="translate(-147.66835,-228.54044)" />
+      <path
+         style="display:inline;fill:#000000;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         id="path14-9"
+         clip-path="url(#SVGID_2_)"
+         d="m 622.67,229.71 -17.09,94.74 h -48.44 c 0,0 -8.16,-0.31 -13.97,-4.53 -5.85,-4.26 -7.41,-9.26 -7.88,-12.57 -0.47,-3.31 -0.22,-8.43 0.94,-14.87 1.16,-6.44 11.31,-62.78 11.31,-62.78 h 26.81 l -11.56,64.41 c 0,0 -1.04,7.12 6.41,7.22 8.44,0.11 13.69,0.06 13.69,0.06 l 12.88,-71.69 h 26.9 z"
+         class="st1"
+         transform="translate(-147.66835,-228.54044)" />
+      <path
+         style="display:inline;fill:#000000;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         id="path16-2"
+         clip-path="url(#SVGID_2_)"
+         d="m 637.22,229.71 h 26.94 c 0,0 -4.98,6.61 0.88,15.46 0,0 17.58,28.39 19.41,31.26 8.35,13.12 4.81,29.5 -8.09,38.49 -8.31,5.79 -15.69,8.75 -30.65,9.73 -7.79,0.51 -31.42,-0.2 -31.42,-0.2 l 4.19,-23.16 c 0,0 20.67,-0.04 22.98,-0.17 7.54,-0.42 12.41,-2.54 14.94,-7.95 2.51,-5.38 -1.07,-11.46 -4.07,-15.71 0,0 -15.42,-23.59 -16.17,-24.98 -0.75,-1.39 -3.92,-5.98 -2.92,-12.56 0.95,-6.23 3.98,-10.21 3.98,-10.21"
+         class="st1"
+         transform="translate(-147.66835,-228.54044)" />
+      <path
+         style="display:inline;fill:#000000;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         id="path18-0"
+         clip-path="url(#SVGID_2_)"
+         d="m 203.5,260.25 c 0,0 2.03,-7.16 -6.41,-7.22 -4.3,-0.03 -7.77,-0.04 -10.15,-0.05 -3.71,0 -4.06,3.56 -4.06,3.56 l -6.78,37.77 c 0,0 -1.04,7.12 6.41,7.22 4.18,0.06 7.59,0.08 9.95,0.08 3.71,0 4.11,-2.82 4.23,-3.47 0.12,-0.66 0.88,-4.88 0.88,-4.88 h -13.15 l 3.14,-18.67 h 13.36 -0.09 26.84 c -1.51,8.37 -3.38,19.27 -5.11,28.85 -3.27,16.35 -15.77,21.21 -26.93,21.21 h -25.18 c 0,0 -8.17,-0.3 -13.97,-4.52 -5.86,-4.26 -7.41,-9.26 -7.88,-12.57 -0.47,-3.31 -0.22,-8.43 0.94,-14.87 0.74,-4.12 4.26,-23.66 7.35,-40.81 3.07,-14.14 12.46,-21.97 28.77,-21.97 h 23.49 c 0,0 8.37,0.02 13.97,4.52 5.59,4.5 7.09,10.57 7.56,13.88 0.45,3.23 0.53,6.93 -0.54,13.08 H 203.3 Z"
+         class="st1"
+         transform="translate(-147.66835,-228.54044)"
+         sodipodi:nodetypes="ccccccsccccccccsccsccscccccc" />
+      <path
+         style="display:inline;fill:#000000;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         id="path20-2"
+         clip-path="url(#SVGID_2_)"
+         d="m 289.97,260.2 -2.58,14.39 c 0,0 -4.14,23.11 -4.22,23.55 -0.12,0.66 -0.52,3.47 -4.23,3.47 -2.36,0 -5.77,-0.02 -9.95,-0.08 -7.45,-0.1 -6.41,-7.22 -6.41,-7.22 l 6.78,-37.77 c 0,0 0.35,-3.56 4.05,-3.56 2.38,0.01 5.85,0.02 10.15,0.05 8.03,0.06 6.41,7.17 6.41,7.17 m 27.19,-11.89 c -0.47,-3.31 -1.97,-9.38 -7.56,-13.88 -5.6,-4.5 -13.97,-4.52 -13.97,-4.52 h -23.49 c -16.31,0 -25.7,7.83 -28.77,21.97 -3.09,17.15 -6.61,36.69 -7.35,40.81 -1.16,6.44 -1.41,11.56 -0.94,14.87 0.47,3.31 2.02,8.31 7.88,12.57 5.8,4.22 13.97,4.52 13.97,4.52 h 25.18 c 11.17,0 23.67,-4.85 26.93,-21.21 1.24,-6.85 2.54,-14.37 3.74,-21.15 l 4.03,-22.09 c 0.87,-5.45 0.77,-8.87 0.35,-11.89"
+         class="st1"
+         transform="translate(-147.66835,-228.54044)" />
+      <path
+         style="display:inline;fill:#000000;fill-opacity:1;stroke:#000000;stroke-opacity:1"
+         id="path22-3"
+         clip-path="url(#SVGID_2_)"
+         d="m 498.56,287.81 c -0.93,5.18 -1.78,9.94 -1.82,10.14 -0.12,0.66 -0.52,3.47 -4.23,3.47 -2.36,0 -5.77,-0.02 -9.95,-0.08 -7.45,-0.1 -6.41,-7.22 -6.41,-7.22 l 6.78,-37.77 c 0,0 0.35,-3.56 4.05,-3.56 2.38,0.01 5.85,0.02 10.15,0.05 8.03,0.06 6.41,7.17 6.41,7.17 l -1.14,6.36 h 26.82 l 1.16,-6.36 c 0.87,-5.45 0.77,-8.87 0.35,-11.89 -0.47,-3.31 -1.97,-9.38 -7.56,-13.88 -5.6,-4.5 -13.97,-4.52 -13.97,-4.52 h -23.49 c -16.31,0 -25.7,7.83 -28.77,21.97 -3.09,17.15 -6.61,36.69 -7.35,40.81 -1.16,6.44 -1.41,11.56 -0.94,14.87 0.47,3.31 2.02,8.31 7.88,12.57 5.8,4.22 13.97,4.52 13.97,4.52 h 25.18 c 11.17,0 23.67,-4.85 26.93,-21.21 0.9,-4.97 1.83,-10.29 2.73,-15.43 h -26.78 z"
+         class="st1"
+         transform="translate(-147.66835,-228.54044)" />
+    </g>
+  </g>
+</svg>

openscad/own/2d-to-3d-scad/gonicus/src/GONICUS-Logo_2022_logo-only.svg

@@ -1,21 +1,42 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no"?>
 <svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
    xml:space="preserve"
    style="enable-background:new 0 0 841.89 595.28;"
    viewBox="0 0 841.89 595.28"
    y="0px"
    x="0px"
    id="Ebene_1"
-   version="1.1"><metadata
+   version="1.1"
+   sodipodi:docname="GONICUS-Logo_2022_logo-only.svg"
+   inkscape:version="1.4.2 (ebf0e940d0, 2025-05-08)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:xlink="http://www.w3.org/1999/xlink"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:dc="http://purl.org/dc/elements/1.1/"><sodipodi:namedview
+   id="namedview1"
+   pagecolor="#ffffff"
+   bordercolor="#000000"
+   borderopacity="0.25"
+   inkscape:showpageshadow="2"
+   inkscape:pageopacity="0.0"
+   inkscape:pagecheckerboard="0"
+   inkscape:deskcolor="#d1d1d1"
+   inkscape:zoom="1.9537024"
+   inkscape:cx="420.99555"
+   inkscape:cy="297.64001"
+   inkscape:window-width="5120"
+   inkscape:window-height="1372"
+   inkscape:window-x="0"
+   inkscape:window-y="0"
+   inkscape:window-maximized="1"
+   inkscape:current-layer="Ebene_1" /><metadata
    id="metadata33"><rdf:RDF><cc:Work
        rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-         rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
+         rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
    id="defs31">
 	<defs
    id="defs7">
@@ -49,38 +70,40 @@
 </style>
 
 <g
-   id="g861"><path
+   id="g861"
+   style="fill:#000000"><path
      class="st0"
      d="M415.1,265.77l-10.5,58.68h26.88l10.5-58.68H415.1z M421.55,229.71l-4.13,23.06h26.87l4.13-23.06H421.55z"
-     id="path4" /><path
-     style="fill:#213a8f"
+     id="path4"
+     style="fill:#000000" /><path
+     style="fill:#000000"
      id="path12"
      clip-path="url(#SVGID_2_)"
      d="m 316.76,324.45 17.09,-94.74 h 48.44 c 0,0 8.38,0.03 13.97,4.53 5.59,4.5 7.09,10.56 7.56,13.88 0.47,3.31 0.53,7.13 -0.63,13.56 -1.16,6.44 -11.31,62.78 -11.31,62.78 h -26.81 l 11.56,-64.41 c 0,0 2.03,-7.16 -6.41,-7.22 -8.44,-0.06 -13.69,-0.06 -13.69,-0.06 l -12.88,71.69 h -26.89 z"
      class="st1" /><path
-     style="fill:#213a8f"
+     style="fill:#000000"
      id="path14"
      clip-path="url(#SVGID_2_)"
      d="m 622.67,229.71 -17.09,94.74 h -48.44 c 0,0 -8.16,-0.31 -13.97,-4.53 -5.85,-4.26 -7.41,-9.26 -7.88,-12.57 -0.47,-3.31 -0.22,-8.43 0.94,-14.87 1.16,-6.44 11.31,-62.78 11.31,-62.78 h 26.81 l -11.56,64.41 c 0,0 -1.04,7.12 6.41,7.22 8.44,0.11 13.69,0.06 13.69,0.06 l 12.88,-71.69 h 26.9 z"
      class="st1" /><path
-     style="fill:#213a8f"
+     style="fill:#000000"
      id="path16"
      clip-path="url(#SVGID_2_)"
      d="m 637.22,229.71 h 26.94 c 0,0 -4.98,6.61 0.88,15.46 0,0 17.58,28.39 19.41,31.26 8.35,13.12 4.81,29.5 -8.09,38.49 -8.31,5.79 -15.69,8.75 -30.65,9.73 -7.79,0.51 -31.42,-0.2 -31.42,-0.2 l 4.19,-23.16 c 0,0 20.67,-0.04 22.98,-0.17 7.54,-0.42 12.41,-2.54 14.94,-7.95 2.51,-5.38 -1.07,-11.46 -4.07,-15.71 0,0 -15.42,-23.59 -16.17,-24.98 -0.75,-1.39 -3.92,-5.98 -2.92,-12.56 0.95,-6.23 3.98,-10.21 3.98,-10.21"
      class="st1" /><path
-     style="fill:#213a8f"
+     style="fill:#000000"
      id="path18"
      clip-path="url(#SVGID_2_)"
      d="m 203.5,260.25 c 0,0 2.03,-7.16 -6.41,-7.22 -4.3,-0.03 -7.77,-0.04 -10.15,-0.05 -3.71,0 -4.06,3.56 -4.06,3.56 l -6.78,37.77 c 0,0 -1.04,7.12 6.41,7.22 4.18,0.06 7.59,0.08 9.95,0.08 3.71,0 4.11,-2.82 4.23,-3.47 0.12,-0.66 0.88,-4.88 0.88,-4.88 h -13.15 l 3.14,-18.67 h 13.36 -0.09 26.84 c -1.51,8.37 -3.38,19.27 -5.11,28.85 -3.27,16.35 -15.77,21.21 -26.93,21.21 h -25.18 c 0,0 -8.17,-0.3 -13.97,-4.52 -5.86,-4.26 -7.41,-9.26 -7.88,-12.57 -0.47,-3.31 -0.22,-8.43 0.94,-14.87 0.74,-4.12 4.26,-23.66 7.35,-40.81 3.07,-14.14 12.46,-21.97 28.77,-21.97 h 23.49 c 0,0 8.37,0.02 13.97,4.52 5.59,4.5 7.09,10.57 7.56,13.88 0.45,3.23 0.53,6.93 -0.54,13.08 H 203.3 Z"
      class="st1" /><path
-     style="fill:#213a8f"
+     style="fill:#000000"
      id="path20"
      clip-path="url(#SVGID_2_)"
      d="m 289.97,260.2 -2.58,14.39 c 0,0 -4.14,23.11 -4.22,23.55 -0.12,0.66 -0.52,3.47 -4.23,3.47 -2.36,0 -5.77,-0.02 -9.95,-0.08 -7.45,-0.1 -6.41,-7.22 -6.41,-7.22 l 6.78,-37.77 c 0,0 0.35,-3.56 4.05,-3.56 2.38,0.01 5.85,0.02 10.15,0.05 8.03,0.06 6.41,7.17 6.41,7.17 m 27.19,-11.89 c -0.47,-3.31 -1.97,-9.38 -7.56,-13.88 -5.6,-4.5 -13.97,-4.52 -13.97,-4.52 h -23.49 c -16.31,0 -25.7,7.83 -28.77,21.97 -3.09,17.15 -6.61,36.69 -7.35,40.81 -1.16,6.44 -1.41,11.56 -0.94,14.87 0.47,3.31 2.02,8.31 7.88,12.57 5.8,4.22 13.97,4.52 13.97,4.52 h 25.18 c 11.17,0 23.67,-4.85 26.93,-21.21 1.24,-6.85 2.54,-14.37 3.74,-21.15 l 4.03,-22.09 c 0.87,-5.45 0.77,-8.87 0.35,-11.89"
      class="st1" /><path
-     style="fill:#213a8f"
+     style="fill:#000000"
      id="path22"
      clip-path="url(#SVGID_2_)"
      d="m 498.56,287.81 c -0.93,5.18 -1.78,9.94 -1.82,10.14 -0.12,0.66 -0.52,3.47 -4.23,3.47 -2.36,0 -5.77,-0.02 -9.95,-0.08 -7.45,-0.1 -6.41,-7.22 -6.41,-7.22 l 6.78,-37.77 c 0,0 0.35,-3.56 4.05,-3.56 2.38,0.01 5.85,0.02 10.15,0.05 8.03,0.06 6.41,7.17 6.41,7.17 l -1.14,6.36 h 26.82 l 1.16,-6.36 c 0.87,-5.45 0.77,-8.87 0.35,-11.89 -0.47,-3.31 -1.97,-9.38 -7.56,-13.88 -5.6,-4.5 -13.97,-4.52 -13.97,-4.52 h -23.49 c -16.31,0 -25.7,7.83 -28.77,21.97 -3.09,17.15 -6.61,36.69 -7.35,40.81 -1.16,6.44 -1.41,11.56 -0.94,14.87 0.47,3.31 2.02,8.31 7.88,12.57 5.8,4.22 13.97,4.52 13.97,4.52 h 25.18 c 11.17,0 23.67,-4.85 26.93,-21.21 0.9,-4.97 1.83,-10.29 2.73,-15.43 h -26.78 z"
      class="st1" /></g>
-</svg>
+</svg>

openscad/own/gpu-antisag/gpu-antisag.scad

@@ -0,0 +1,55 @@
+// by zeus - zeus@ctdo.de - CC-BY-NC-4.00
+// -> https://www.thingiverse.com/zeus
+// -> https://www.printables.com/social/366928-zeus/about
+// -> https://github.com/zeus86
+// -> https://blog.tastatursport.de/
+// 2023-03-28
+// GPU-antisag-adapter for Lian Li O11D Evo with vertical GPU Kit and 25mm Bottom-Fans (default orientation)
+//##################
+// 
+//
+//##################
+//
+// VARS
+mt=5;               // general material thickness
+cen_w=8;            // center bar
+cen_h=mt;           // center bar
+cen_elev=24;        // total center elevation
+depth=110;          // 110 for 120mm fans
+tri_w=40;           // triangular plate
+tri_x=tri_w/sqrt(2);// nominal side-length of the square-section, the triangular shape is made of
+tri_h=mt;           // triangular plate
+$fn=100;            // general resolution
+q=0.01;             // used to avoid graphical glitches
+hds=15;             // short hole-distance
+hdl=105;            // long hole distance
+holedia=5;        // diameter of the hole for the screw//
+hole_dist=holedia-0.66; // distance from edge
+//##################
+//
+// MODEL
+module triangle(){
+  difference(){
+      rotate([0,0,45])cube([tri_x,tri_x,mt],center=true);
+      translate([0,-tri_w/2,0])cube([tri_w,tri_w,5+q],center=true);
+      for (x=[hds/2,-hds/2]){
+          translate([x,hole_dist,0]){
+              cylinder(r=holedia/2,h=mt+q,center=true);
+              translate([0,0,holedia*0.3])cylinder(r1=holedia/2,r2=holedia,h=mt+q,center=true);
+          }
+      }
+  }  
+};
+
+module cen(){
+    hull(){
+        cube([cen_w,hdl-(hole_dist*1.5)-q,cen_h],center=true);
+        translate([0,0,cen_elev-mt])cube([cen_w,hdl/2,cen_h],center=true);
+    }
+}
+
+translate([0,0,mt/2]){
+    triangle();
+    translate([0,hdl/2+hole_dist,0])cen();
+    translate([0,hdl+hole_dist*2,0])rotate([0,0,180])triangle();
+}

openscad/own/hex-rackpanels/.gitignore

@@ -0,0 +1,2 @@
+raw/*
+hex-rackpanels.zip